Searcharxiv⌕ Search

arXiv subjects

Willem van Straten

Publications and source records attributed to Willem van Straten.

33 records · Page 2Linked to original sources

Gravitational-wave cosmology across 29 decades in frequency

Quantum fluctuations of the gravitational field in the early Universe, amplified by inflation, produce a primordial gravitational-wave background across a broad frequency band. We derive constraints on the spectrum of this gravitational radiation, and hence on theories of the early Universe, by combining experiments that cover 29 orders of magnitude in frequency. These include Planck observations of cosmic microwave background temperature and polarization power spectra and lensing, together with baryon acoustic oscillations and big bang nucleosynthesis measurements, as well as new pulsar timing array and ground-based interferometer limits. While individual experiments constrain the gravitational-wave energy density in specific frequency bands, the combination of experiments allows us to constrain cosmological parameters, including the inflationary spectral index, $n_t$, and the tensor-to-scalar ratio, $r$. Results from individual experiments include the most stringent nanohertz limit of the primordial background to date from the Parkes Pulsar Timing Array, $Ω_{\rm gw}(f)<2.3\times10^{-10}$. Observations of the cosmic microwave background alone limit the gravitational-wave spectral index at 95\% confidence to $n_t\lesssim5$ for a tensor-to-scalar ratio of $r = 0.11$. However, the combination of all the above experiments limits $n_t<0.36$. Future Advanced LIGO observations are expected to further constrain $n_t<0.34$ by 2020. When cosmic microwave background experiments detect a non-zero $r$, our results will imply even more stringent constraints on $n_t$ and hence theories of the early Universe.

astro-ph.CO↗

Intrinsic Instrumental Polarization and High-Precision Pulsar Timing

Radio telescopes are used to accurately measure the time of arrival (ToA) of radio pulses in pulsar timing experiments that target mostly millisecond pulsars (MSPs) due to their high rotational stability. This allows for detailed study of MSPs and forms the basis of experiments to detect gravitational waves. Apart from intrinsic and propagation effects, such as pulse-to-pulse jitter and dispersion variations in the interstellar medium, timing precision is limited in part by the following: polarization purity of the telescope's orthogonally polarized receptors, the signal-to-noise ratio (S/N) of the pulsar profile, and the polarization fidelity of the system. Using simulations, we present how fundamental limitations in recovering the true polarization reduce the precision of ToA measurements. Any real system will respond differently to each source observed depending on the unique pulsar polarization profile. Using the profiles of known MSPs we quantify the limits of observing system specifications that yield satisfactory ToA measurements, and we place a practical design limit beyond which improvement of the system results in diminishing returns. Our aim is to justify limits for the front-end polarization characteristics of next generation radio telescopes, leading to the Square Kilometre Array (SKA).

astro-ph.IM↗

Testing Gravity with Pulsars in the SKA Era

The Square Kilometre Array (SKA) will use pulsars to enable precise measurements of strong gravity effects in pulsar systems, which yield tests of gravitational theories that cannot be carried out anywhere else. The Galactic census of pulsars will discover dozens of relativistic pulsar systems, possibly including pulsar -- black hole binaries which can be used to test the "cosmic censorship conjecture" and the "no-hair theorem". Also, the SKA's remarkable sensitivity will vastly improve the timing precision of millisecond pulsars, allowing probes of potential deviations from general relativity (GR). Aspects of gravitation to be explored include tests of strong equivalence principles, gravitational dipole radiation, extra field components of gravitation, gravitomagnetism, and spacetime symmetries.

astro-ph.HE↗

Cyclic spectroscopy of The Millisecond Pulsar, B1937+21

Cyclic spectroscopy is a signal processing technique that was originally developed for engineering applications and has recently been introduced into the field of pulsar astronomy. It is a powerful technique with many attractive features, not least of which is the explicit rendering of information about the relative phases in any filtering imposed on the signal, thus making holography a more straightforward proposition. Here we present methods for determining optimum estimates of both the filter itself and the statistics of the unfiltered signal, starting from a measured cyclic spectrum. In the context of radio pulsars these quantities tell us the impulse response of the interstellar medium and the intrinsic pulse profile. We demonstrate our techniques by application to 428 MHz Arecibo data on the millisecond pulsar B1937+21, obtaining the pulse profile free from the effects of interstellar scattering. As expected, the intrinsic profile exhibits main- and inter-pulse components that are narrower than they appear in the scattered profile; it also manifests some weak, but sharp features that are revealed for the first time at low frequency. We determine the structure of the received electric-field envelope as a function of delay and Doppler-shift. Our delay-Doppler image has a high dynamic-range and displays some pronounced, low-level power concentrations at large delays. These concentrations imply strong clumpiness in the ionized interstellar medium, on AU size-scales, which must adversely affect the timing of B1937+21.

astro-ph.HE↗

Improving the precision of pulsar timing through polarization statistics

At the highest levels of pulsar timing precision achieved to date, experiments are limited by noise intrinsic to the pulsar. This stochastic wideband impulse modulated self-noise (SWIMS) limits pulsar timing precision by randomly biasing the measured times of arrival and thus increasing the root mean square (rms) timing residual. We discuss an improved methodology of removing this bias in the measured times of arrival by including information about polarized radiation. Observations of J0437-4715 made over a one-week interval at the Parkes Observatory are used to demonstrate a nearly 40 per cent improvement in the rms timing residual with this extended analysis. In this way, based on the observations over a 64 MHz bandwidth centred at 1341 MHz with integrations over 16.78 s we achieve a 476 ns rms timing residual. In the absence of systematic error, these results lead to a predicted rms timing residual of 30 ns in one hour integrations; however the data are currently limited by variable Faraday rotation in the Earth's ionosphere. The improvement demonstrated in this work provides an opportunity to increase the sensitivity in various pulsar timing experiments, for example pulsar timing arrays that pursue the detection of the stochastic background of gravitational waves. The fractional improvement is highly dependent on the properties of the pulse profile and the stochastic wideband impulse modulated self-noise of the pulsar in question.

astro-ph.IM↗

Tracking dispersion measure variations of timing array pulsars with the GMRT

We present the results from nearly three years of monitoring of the variations in dispersion measure (DM) along the line-of-sight to 11 millisecond pulsars using the Giant Metrewave Radio Telescope (GMRT). These results demonstrate accuracies of single epoch DM estimates of the order of 5x10^(-4) cm^(-3) pc. A preliminary comparison with the Parkes Pulsar Timing Array (PPTA) data shows that the measured DM fluctuations are comparable. We show effects of DM variations due to the solar wind and solar corona and compare with the existing models.

astro-ph.HE↗

Pulsar data analysis with PSRCHIVE

PSRCHIVE is an open-source, object-oriented, scientific data analysis software library and application suite for pulsar astronomy. It implements an extensive range of general-purpose algorithms for use in data calibration and integration, statistical analysis and modeling, and visualisation. These are utilised by a variety of applications specialised for tasks such as pulsar timing, polarimetry, radio frequency interference mitigation, and pulse variability studies. This paper presents a general overview of PSRCHIVE functionality with some focus on the integrated interfaces developed for the core applications.

astro-ph.IM↗

High signal-to-noise ratio observations and the ultimate limits of precision pulsar timing

We demonstrate that the sensitivity of high-precision pulsar timing experiments will be ultimately limited by the broadband intensity modulation that is intrinsic to the pulsar's stochastic radio signal. That is, as the peak flux of the pulsar approaches that of the system equivalent flux density, neither greater antenna gain nor increased instrumental bandwidth will improve timing precision. These conclusions proceed from an analysis of the covariance matrix used to characterise residual pulse profile fluctuations following the template matching procedure for arrival time estimation. We perform such an analysis on 25 hours of high-precision timing observations of the closest and brightest millisecond pulsar, PSR J0437-4715. In these data, the standard deviation of the post-fit arrival time residuals is approximately four times greater than that predicted by considering the system equivalent flux density, mean pulsar flux and the effective width of the pulsed emission. We develop a technique based on principal component analysis to mitigate the effects of shape variations on arrival time estimation and demonstrate its validity using a number of illustrative simulations. When applied to our observations, the method reduces arrival time residual noise by approximately 20%. We conclude that, owing primarily to the intrinsic variability of the radio emission from PSR J0437-4715 at 20 cm, timing precision in this observing band better than 30 - 40 ns in one hour is highly unlikely, regardless of future improvements in antenna gain or instrumental bandwidth. We describe the intrinsic variability of the pulsar signal as stochastic wideband impulse modulated self-noise (SWIMS) and argue that SWIMS will likely limit the timing precision of every millisecond pulsar currently observed by Pulsar Timing Array projects as larger and more sensitive antennae are built in the coming decades.

astro-ph.GA↗

Rotation measure variations for 20 millisecond pulsars

We report on variations in the mean position angle of the 20 millisecond pulsars being observed as part of the Parkes Pulsar Timing Array (PPTA) project. It is found that the observed variations are dominated by changes in the Faraday rotation occurring in the Earth's ionosphere. Two ionospheric models are used to correct for the ionospheric contribution and it is found that one based on the International Reference Ionosphere gave the best results. Little or no significant long-term variation in interstellar RM was found with limits typically about 0.1 rad m$^{-2}$ yr$^{-1}$ in absolute value. In a few cases, apparently significant RM variations over timescales of a few 100 days or more were seen. These are unlikely to be due to localised magnetised regions crossing the line of sight since the implied magnetic fields are too high. Most probably they are statistical fluctuations due to random spatial and temporal variations in the interstellar electron density and magnetic field along the line of sight.

astro-ph.SR↗

Polarization observations of 20 millisecond pulsars

Polarization profiles are presented for 20 millisecond pulsars that are being observed as part of the Parkes Pulsar Timing Array project. The observations used the Parkes multibeam receiver with a central frequency of 1369 MHz and the Parkes digital filterbank pulsar signal-processing system PDFB2. Because of the large total observing time, the summed polarization profiles have very high signal/noise ratios and show many previously undetected profile features. Thirteen of the 20 pulsars show emission over more than half of the pulse period. Polarization variations across the profiles are complex and the observed position angle variations are generally not in accord with the rotating-vector model for pulsar polarization. Never-the-less, the polarization properties are broadly similar to those of normal (non-millisecond) pulsars, suggesting that the basic radio emission mechanism is the same in both classes of pulsar. The results support the idea that radio emission from millisecond pulsars originates high in the pulsar magnetosphere, probably close to the emission regions for high-energy X-ray and gamma-ray emission. Rotation measures were obtained for all 20 pulsars, eight of which had no previously published measurements.

astro-ph.SR↗

A Radio-loud Magnetar in X-ray Quiescence

As part of a survey for radio pulsars with the Parkes 64-m telescope we have discovered PSR J1622-4950, a pulsar with a 4.3-s rotation period. Follow-up observations show that the pulsar has the highest inferred surface magnetic field of the known radio pulsars (B ~ 3e14 G), exhibits significant timing noise and appears to have an inverted spectrum. Unlike the vast majority of the known pulsar population, PSR J1622-4950 appears to switch off for many hundreds of days and even in its on-state exhibits extreme variability in its flux density. Furthermore, the integrated pulse profile changes shape with epoch. All of these properties are remarkably similar to the only two magnetars previously known to emit radio pulsations. The position of PSR J1622-4950 is coincident with an X-ray source that, unlike the other radio pulsating magnetars, was found to be in quiescence. We conclude that our newly discovered pulsar is a magnetar - the first to be discovered via its radio emission.

astro-ph.HE↗

PuMaII: A wide band pulsar machine for the WSRT

The Pulsar Machine II (PuMa II) is the new flexible pulsar processing backend system at the Westerbork Synthesis Radio Telescope (WSRT), specifically designed to take advantage of the upgraded WSRT. The instrument is based on a computer cluster running the Linux operating system, with minimal custom hardware. A maximum of 160 MHz analogue bandwidth sampled as 8X20 MHz subbands with 8-bit resolution can be recorded on disks attached to separate computer nodes. Processing of the data is done in the additional 32-nodes allowing near real time coherent dedispersion for most pulsars observed at the WSRT. This has doubled the bandwidth for pulsar observations in general, and has enabled the use of coherent dedispersion over a bandwidth eight times larger than was previously possible at the WSRT. PuMa II is one of the widest bandwidth coherent dedispersion machines currently in use and has a maximum time resolution of 50ns. The system is now routinely used for high precision pulsar timing studies, polarization studies, single pulse work and a variety of other observational work.

astro-ph↗

Interstellar Holography

The dynamic spectrum of a radio pulsar is an in-line digital hologram of the ionised interstellar medium. It has previously been demonstrated that such holograms permit image reconstruction, in the sense that one can determine an approximation to the complex electric field values as a function of Doppler-shift and delay, but to date the quality of the reconstructions has been poor. Here we report a substantial improvement in the method which we have achieved by simultaneous optimisation of the thousands of coefficients that describe the electric field. For our test spectrum of PSR B0834+06 we find that the model provides an accurate representation of the data over the full 63 dB dynamic range of the observations: residual differences between model and data are noise-like. The advent of interstellar holography enables detailed quantitative investigation of the interstellar radio-wave propagation paths for a given pulsar at each epoch of observation; we illustrate this using our test data which show the scattering material to be structured and highly anisotropic. The temporal response of the medium exhibits a scattering tail out to beyond 100 microsec and a pulse arrival time measurement at this frequency and this epoch of observation would be affected by a mean delay of 15 microsec due to multipath propagation in the interstellar medium.

astro-ph↗

Polarimetric Pulse Profile Modeling: Applications to High-Precision Timing and Instrumental Calibration

A new method is presented for modeling the transformation between two polarimetric pulse profiles in the Fourier domain. In practice, one is a well-determined standard with high signal-to-noise ratio and the other is an observation that is to be fitted to the standard. From this fit, both the longitudinal shift and the polarimetric transformation between the two profiles are determined. Arrival time estimates derived from the best-fit longitudinal shift are shown to exhibit greater precision than those derived from the total intensity profile alone. In addition, the polarimetric transformation obtained through this method may be used to completely calibrate the instrumental response in observations of other sources.

astro-ph↗

High time-resolution observations of the Vela pulsar

We present high time resolution observations of single pulses from the Vela pulsar (PSR B0833-45) made with a baseband recording system at observing frequencies of 660 and 1413 MHz. We have discovered two startling features in the 1413 MHz single pulse data. The first is the presence of giant micro-pulses which are confined to the leading edge of the pulse profile. One of these pulses has a peak flux density in excess of 2500 Jy, more than 40 times the integrated pulse peak. The second new result is the presence of a large amplitude gaussian component on the trailing edge of the pulse profile. This component can exceed the main pulse in intensity but is switched on only relatively rarely. Fluctutation spectra reveal a possible periodicity in this feature of 140 pulse periods. Unlike the rest of the profile, this component has low net polarization and emits predominantly in the orthogonal mode. This feature appears to be unique to the Vela pulsar. We have also detected microstructure in the Vela pulsar for the first time. These same features are present in the 660 MHz data. We suggest that the full width of the Vela pulse profile might be as large as 10 ms but that the conal edges emit only rarely.

astro-ph↗