arXiv subjects

William A. Tisdale

Publications and source records attributed to William A. Tisdale.

At least 19 recordsLinked to original sources

arXiv2026

Coherent interaction of WS$_2$ and quasi-2D perovskite excitons over micrometer distances via a cavity field

The coherent coupling of cavity-confined photons and excitonic matter resonances leads to the formation of cavity polaritons, hybrid light-matter quasi-particles. If multiple exciton resonances couple to the same photonic mode, the resulting polariton constitutes a coherent interaction between matter resonances that can be spatially separated without any direct electronic coupling. In this work, we demonstrate the formation of such a coherent coupling at room temperature using an open optical cavity containing two distinct van der Waals materials - monolayer WS2 and layered quasi-2D halide perovskites (HaPs) - separated by $1.5 μ\rm m$. The system forms three polariton branches, with the middle branch possessing nearly equal fractions of both excitons and the photonic mode. White-light reflectivity and luminescence measurements are in good agreement with simulations using a coupled harmonic oscillator and a microscopic Wannier-Hopfield framework. Our results lay the foundation to combine highly complementary degrees of freedom in 2D materials in an in-situ tunable fashion to enable new polaritonic functionalities.

cond-mat.mes-hall↗

arXiv2026

Nonequilibrium transport in epitaxial CsPbBr3 single crystals

Transport of optically excited carriers in semiconductors is typically described within a quasi-equilibrium picture, where energy is carried by a single thermalized quasiparticle population characterized by well-defined transport coefficients. Here, we demonstrate that in epitaxial CsPbBr3 perovskite single crystals, this picture holds near room temperature - but breaks down dramatically at low temperature. Using transient microscopy, we show that optically measured carrier mobilities match device-scale Hall-effect and field-effect transistor measurements across a broad temperature range, resolving reported discrepancies and validating the equilibrium framework in the free-carrier regime. Below ~60 K, however, when excitonic effects become significant, equilibrium models begin to fail. We observe two coupled populations: a transient (<100 ps) hot-exciton gas with a diffusivity ~25-30 cm 2 /s - greatly exceeding the diffusivity expected for thermalized excitons - and a quasi-localized state that is fed by the cooling of the hot-exciton gas. These results reveal that in CsPbBr3, transport and thermalization are not separable processes: carriers move while still redistributing among internal degrees of freedom, breaking the timescale separation that underpins equilibrium transport theory in conventional semiconductors. By resolving transport at the population level, we can directly access the competing kinetics of exciton formation, interconversion, and cooling, offering a new space for controlling energy flow in perovskite materials and their photonic applications.

cond-mat.mes-hall↗

arXiv2026

Engineering in-plane anisotropy in 2D materials via surface-bound ligands

2D materials exhibiting in-plane anisotropy enable novel functionality in electronic, optoelectronic, and photonic devices, yet their availability is generally limited to naturally-occurring low-symmetry van der Waals compounds. Here, we demonstrate an approach to structural engineering in a family of blue-emitting 2D silver phenylchalcogenide semiconductors based on steric interactions among surface-bound organic molecular ligands. By strategically halogenating specific sites of phenyl ligands, we demonstrate dramatic changes to the inorganic AgSe plane in mithrene (silver phenylselenolate, AgSePh). Density functional theory revealed pronounced in-plane electronic anisotropy for direct-gap fluorinated derivatives, while a chlorinated variant exhibited a direct-to-indirect bandgap transition. Furthermore, some fluorinated variants displayed strongly polarized absorption and luminescence, accompanied by a 10x enhancement in photoluminescence quantum yield. This work establishes a versatile approach for tailoring optoelectronic properties in hybrid semiconductors that is difficult or impossible to achieve in all-inorganic materials alone, offering new opportunities in advanced material design.

cond-mat.mtrl-sci↗

arXiv2024

Triplet Exciton Sensitization of Silicon Mediated by Defect States in Hafnium Oxynitride

Singlet exciton fission has the potential to increase the efficiency of crystalline silicon solar cells beyond the conventional single junction limit. Perhaps the largest obstacle to achieving this enhancement is uncertainty about energy coupling mechanisms at the interfaces between silicon and exciton fission materials such as tetracene. Here, the previously reported silicon-hafnium oxynitride-tetracene structure is studied and a combination of magnetic-field-dependent silicon photoluminescence measurements and density functional theory calculations is used to probe the influence of the interlayer composition on the triplet transfer process across the hafnium oxynitride interlayer. It is found that hafnium oxide interlayers do not show triplet exciton sensitization of silicon, and that nitrogen content in hafnium oxynitride layers is correlated with enhanced sensitization. Calculation results reveal that defects in hafnium oxynitride interlayers with higher nitrogen content introduce states close to the band-edge of silicon, which can mediate the triplet exciton transfer process. Some defects introduce additional deleterious mid-gap states, which may explain observed silicon photoluminescence quenching. These results show that band-edge states can mediate the triplet exciton transfer process, potentially through a sequential charge transfer mechanism.

cond-mat.mtrl-sci↗

arXiv2024

Exciton Fission Enhanced Silicon Solar Cell

While silicon solar cells dominate global photovoltaic energy production, their continued improvement is hindered by the single junction limit. One potential solution is to use molecular singlet exciton fission to generate two electrons from each absorbed high-energy photon. We demonstrate that the long-standing challenge of coupling molecular excited states to silicon solar cells can be overcome using sequential charge transfer. Combining zinc phthalocyanine, aluminum oxide, and a shallow junction crystalline silicon microwire solar cell, the peak charge generation efficiency per photon absorbed in tetracene is (138 +- 6)%, comfortably surpassing the quantum efficiency limit for conventional silicon solar cells and establishing a new, scalable approach to low cost, high efficiency photovoltaics.

cond-mat.mtrl-sci↗

arXiv2023

Coherent Exciton-Lattice Dynamics in a 2D Metal Organochalcogenolate Semiconductor

Hybrid organic-inorganic nanomaterials can exhibit transitional behavior that deviates from models developed for all-organic or all-inorganic materials systems. Here, we reveal the complexity of exciton-phonon interactions in a recently discovered 2D layered hybrid organic-inorganic semiconductor, silver phenylselenolate (AgSePh). Using femtosecond resonant impulsive vibrational spectroscopy and non-resonant Raman scattering, we measure multiple hybrid organic-inorganic vibrational modes and identify a subset of these modes that strongly couple to the electronic excited state. Calculations by density functional perturbation theory show that these strongly coupled modes exhibit large out-of-plane silver atomic motions and silver-selenium spacing displacements. Moreover, analysis of photoluminescence fine-structure splitting and temperature-dependent peak-shifting/linewidth-broadening suggests that light emission in AgSePh is most strongly affected by a compound 100 cm-1 mode involving the wagging motion of phenylselenolate ligands and accompanying metal-chalcogen stretching. Finally, red-shifting of vibrational modes with increasing temperature reveals a high degree of anharmonicity arising from non-covalent interactions between phenyl rings. These findings reveal the unique effects of hybrid vibrational modes in organic-inorganic semiconductors and motivate future work aimed at specifically engineering such interactions through chemical and structural modification.

cond-mat.mtrl-sci↗

arXiv2023

Efficient Thermal Transport across Molecular Chains in Hybrid 2D Lead Bromide Perovskites

We report measurements of the heat capacity and cross-plane thermal conductivity of 2D (CxH2x+1NH3)2[MAPbBr3]n-1PbBr4 (MA = methylammonium) lead bromide perovskites (2D LHPs) at room temperature as a function of both the octahedral layer thickness (n = 1,2,3) and the organic spacer chain length (x=4,5,6,7,8) using differential scanning calorimetry (DSC) and frequency domain thermoreflectance (FDTR) respectively. We observe ultralow thermal conductivities (0.18-0.51 W/m K) for all 2D LHPs studied, but surprisingly minimal suppression of thermal conductivity with respect to bulk MAPbBr3 (0.5 W/m K). Cross-plane thermal conductivity is found to increase monotonically as a function of both the octahedral layer thickness (0.18-0.26 W/m K for n=1-3) and the organic chain length (0.18-0.51 W/m K for x=4-8). Additionally, we measure heat capacities that are well described by composite theory, suggesting bulk-like phonon density-of-states within the separate organic and inorganic subphases of the layered structure. The striking observation of increasing thermal conductivity with increasing organic phase fraction (i.e. increasing organic chain length) indicates efficient thermal transport along the ordered alkyl chain backbone. Our experimental results agree most closely with a predictive model of ballistic phonon transport with diffuse interface scattering - rather than normal thermal conduction within each phase. This study indicates the potential for synthesizing 2D LHPs with thermal conductivity that exceeds the bulk perovskite phase, while also shedding light on relevant phonon transport pathways in 2D LHPs.

physics.app-ph↗

arXiv2023

Discovery of enhanced lattice dynamics in a single-layered hybrid perovskite

Layered hybrid perovskites have attracted much attention in recent years due to their emergent physical properties and exceptional functional performances, but the coexistence of lattice order and structural disorder severely hinders our understanding of these materials. One unsolved problem regards how the lattice dynamics are affected by the dimensional engineering of the inorganic frameworks and the interaction with the molecular moieties. Here, we address this question by using a combination of high-resolution spontaneous Raman scattering, high-field terahertz spectroscopy, and molecular dynamics simulations. This approach enables us to reveal the structural vibrations and disorder in and out of equilibrium and provides surprising observables that differentiate single- and double-layered perovskites. While no distinct vibrational coherence is observed in double-layer perovskites, we discover that an off-resonant terahertz pulse can selectively drive a long-lived coherent phonon mode through a two-photon process in the single-layered system. This difference highlights the dramatic change in the lattice environment as the dimension is reduced. The present findings pave the way for the ultrafast structural engineering of hybrid lattices as well as for developing high-speed optical modulators based on layered perovskites.

cond-mat.mtrl-sci↗

arXiv2022

Persistent Enhancement of Exciton Diffusivity in CsPbBr3 Nanocrystal Solids

In semiconductors, exciton or charge carrier diffusivity is typically described as an inherent material property. Here, we show that the transport of excitons (i.e., bound electron-hole pairs) in CsPbBr3 perovskite nanocrystals (NCs) depends markedly on how recently those NCs were occupied by a previous exciton. Using fluence- and repetition-rate-dependent transient photoluminescence microscopy, we visualize the effect of excitation frequency on exciton transport in CsPbBr3 NC solids. Surprisingly, we observe a striking dependence of the apparent exciton diffusivity on excitation laser power that does not arise from nonlinear exciton-exciton interactions nor from thermal heating of the sample. We interpret our observations with a model in which excitons cause NCs to undergo a transition to a metastable configuration that admits faster exciton transport by roughly an order of magnitude. This metastable configuration persists for ~microseconds at room temperature, and does not depend on the identity of surface ligands or presence of an oxide shell, suggesting that it is an intrinsic response of the perovskite lattice to electronic excitation. The exciton diffusivity observed here (>0.15 cm2/s) is considerably higher than that observed in other NC systems on similar timescales, revealing unusually strong excitonic coupling in a NC material. The finding of a persistent enhancement in excitonic coupling between NCs may help explain other extraordinary photophysical behaviors observed in CsPbBr3 NC arrays, such as superfluorescence. Additionally, faster exciton diffusivity under higher photoexcitation intensity is likely to provide practical insights for optoelectronic device engineering.

cond-mat.mes-hall↗

arXiv2021

Revealing the Brønsted-Evans-Polanyi Relation in Halide-Activated Fast MoS2 Growth Towards Millimeter-Sized 2D Crystals

Achieving large-size two-dimensional (2D) crystals is key to fully exploiting their remarkable functionalities and application potentials. Chemical vapor deposition (CVD) growth of 2D semiconductors such as monolayer MoS2 has been reported to be activated by halide salts, yet clear identification of the underlying mechanism remains elusive. Here we provide unambiguous experimental evidence showing that the MoS2 growth dynamics are halogen-dependent through the Brønsted-Evans-Polanyi relation, based on which we build a growth model by considering MoS2 edge passivation by halogens, and theoretically reproduces the trend of our experimental observations. These mechanistic understandings enable us to further optimize the fast growth of MoS2 and reach record-large domain sizes that should facilitate practical applications.

cond-mat.mtrl-sci↗

arXiv2018

Suppressing Diffusion-Mediated Exciton Annihilation in 2D Semiconductors Using the Dielectric Environment

Atomically thin semiconductors such as monolayer MoS2 and WS2 exhibit nonlinear exciton-exciton annihilation at notably low excitation densities (below ~10 excitons/um2 in MoS2). Here, we show that the density threshold at which annihilation occurs can be tuned by changing the underlying substrate. When the supporting substrate is changed from SiO2 to Al2O3 or SrTiO3, the rate constant for second-order exciton-exciton annihilation, k_XX [cm2/s], is reduced by one or two orders of magnitude, respectively. Using transient photoluminescence microscopy, we measure the effective room-temperature exciton diffusion coefficient in chemical-treated MoS2 to be D = 0.06 +/- 0.01 cm2/s, corresponding to a diffusion length of LD = 350 nm for an exciton lifetime of τ = 20 ns, which is independent of the substrate. These results, together with numerical simulations, suggest that the effective exciton-exciton annihilation radius monotonically decreases with increasing refractive index of the underlying substrate. Exciton-exciton annihilation limits the overall efficiency of 2D semiconductor devices operating at high exciton densities; the ability to tune these interactions via the dielectric environment is an important step toward more efficient optoelectronic technologies featuring atomically thin materials.

cond-mat.mtrl-sci↗

arXiv2018

Nonequilibrium dynamics of localized and delocalized excitons in colloidal quantum dot solids

Self-assembled quantum dot (QD) solids are a highly tunable class of materials with a wide range of applications in solid-state electronics and optoelectronic devices. In this perspective, we highlight how the presence of microscopic disorder in these materials can influence their macroscopic optoelectronic properties. Specifically, we consider the dynamics of excitons in energetically disordered QD solids using a theoretical model framework for both localized and delocalized excitonic regimes. In both cases, we emphasize the tendency of energetic disorder to promote nonequilibrium relaxation dynamics and discuss how the signatures of these nonequilibrium effects manifest in time-dependent spectral measurements. Moreover, we describe the connection between the microscopic dynamics of excitons within the material and the measurement of material specific parameters, such as emission linewidth broadening and energetic dissipation rate.

physics.chem-ph↗

arXiv2018

Ideal Bandgap in a 2D Ruddlesden-Popper Perovskite Chalcogenide for Single-junction Solar Cells

Transition metal perovskite chalcogenides (TMPCs) are explored as stable, environmentally friendly semiconductors for solar energy conversion. They can be viewed as the inorganic alternatives to hybrid halide perovskites, and chalcogenide counterparts of perovskite oxides with desirable optoelectronic properties in the visible and infrared part of the electromagnetic spectrum. Past theoretical studies have predicted large absorption coefficient, desirable defect characteristics, and bulk photovoltaic effect in TMPCs. Despite recent progresses in polycrystalline synthesis and measurements of their optical properties, it is necessary to grow these materials in high crystalline quality to develop a fundamental understanding of their optical properties and evaluate their suitability for photovoltaic application. Here, we report the growth of single crystals of a two-dimensional (2D) perovskite chalcogenide, Ba3Zr2S7, with a natural superlattice-like structure of alternating double-layer perovskite blocks and single-layer rock salt structure. The material demonstrated a bright photoluminescence peak at 1.28 eV with a large external luminescence efficiency of up to 0.15%. We performed time-resolved photoluminescence spectroscopy on these crystals and obtained an effective recombination time of ~65 ns. These results clearly show that 2D Ruddlesden-Popper phases of perovskite chalcogenides are promising materials to achieve single-junction solar cells.

cond-mat.mtrl-sci↗

arXiv2018

High Repetition-Rate Femtosecond Stimulated Raman Spectroscopy with Fast Acquisition

Time-resolved femtosecond stimulated Raman spectroscopy (FSRS) is a powerful tool for investigating ultrafast structural and vibrational dynamics in light absorbing systems. However, the technique generally requires exposing a sample to high laser pulse fluences and long acquisition times to achieve adequate signal-to-noise ratios. Here, we describe a timeresolved FSRS instrument built around a Yb ultrafast amplifier operating at 200 kHz, and address some of the unique challenges that arise at high repetition-rates. The setup includes detection with a 9 kHz CMOS camera and an improved dual-chopping scheme to reject scattering artifacts that occur in the 3-pulse configuration. The instrument demonstrates good signal-to-noise performance while simultaneously achieving a 3-6 fold reduction in pulse energy and a 5-10 fold reduction in acquisition time relative to comparable 1 kHz instruments.

physics.ins-det↗

arXiv2018

Ultrafast Charge Transfer at a Quantum Dot/2D Materials Interface Probed by Second Harmonic Generation

Hybrid quantum dot (QD) / transition metal dichalcogenide (TMD) heterostructures are attractive components of next generation optoelectronic devices, which take advantage of the spectral tunability of QDs and the charge and exciton transport properties of TMDs. Here, we demonstrate tunable electronic coupling between CdSe QDs and monolayer WS$_2$ using variable length alkanethiol ligands on the QD surface. Using femtosecond time-resolved second harmonic generation (SHG) microscopy, we show that electron transfer from photoexcited CdSe QDs to single-layer WS$_2$ occurs on ultrafast (50 fs - 1 ps) timescales. Moreover, in the samples exhibiting the fastest charge transfer rates ($\leq$ 50 fs) we observed oscillations in the time-domain signal corresponding to an acoustic phonon mode of the donor QD, which coherently modulates the SHG response of the underlying WS$_2$ layer. These results reveal surprisingly strong electronic coupling at the QD/TMD interface and demonstrate the usefulness of time-resolved SHG for exploring ultrafast electronic-vibrational dynamics in TMD heterostructures.

cond-mat.mtrl-sci↗

arXiv2018

Phase-Modulated Degenerate Parametric Amplification Microscopy

Second-order nonlinear optical interactions, including second harmonic generation (SHG) and sum-frequency generation (SFG), can reveal a wealth of information about chemical, electronic, and vibrational dynamics at the nanoscale. Here, we demonstrate a powerful and flexible new approach, called phase-modulated degenerate parametric amplification (DPA). The technique, which allows for facile retrieval of both the amplitude and phase of the second-order nonlinear optical response, has many advantages over conventional or heterodyne-detected SHG, including the flexibility to detect the signal at either the second harmonic or fundamental field wavelength. We demonstrate the capabilities of this approach by imaging multi-grain flakes of single-layer MoS2. We identify the absolute crystal orientation of each MoS2 domain and resolve grain boundaries with high signal contrast and sub-diffraction-limited spatial resolution. This robust all-optical method can be used to characterize structure and dynamics in organic and inorganic systems, including biological tissue, soft materials, and metal and semiconductor nanostructures, and is particularly well-suited for imaging in media that are absorptive or highly scattering to visible and ultraviolet light.

physics.optics↗

arXiv2017

Exciton Trapping Is Responsible for the Long Apparent Lifetime in Acid-Treated MoS2

Here, we show that deep trapped "dark" exciton states are responsible for the surprisingly long lifetime of band-edge photoluminescence in acid-treated single-layer MoS2. Temperature-dependent transient photoluminescence spectroscopy reveals an exponential tail of long-lived states extending hundreds of meV into the band gap. These sub-band states, which are characterized by a 4 microsecond radiative lifetime, quickly capture and store photogenerated excitons before subsequent thermalization up to the band edge where fast radiative recombination occurs. By intentionally saturating these trap states, we are able to measure the "true" 150 ps radiative lifetime of the band-edge exciton at 77 K, which extrapolates to ~600 ps at room temperature. These experiments reveal the dominant role of dark exciton states in acid-treated MoS2, and suggest that excitons spend > 95% of their lifetime at room temperature in trap states below the band edge. We hypothesize that these states are associated with native structural defects, which are not introduced by the superacid treatment; rather, the superacid treatment dramatically reduces non-radiative recombination through these states, extending the exciton lifetime and increasing the likelihood of eventual radiative recombination.

cond-mat.mes-hall↗

arXiv2017

Including surface ligand effects in continuum elastic models of nanocrystal vibrations

The measured low frequency vibrational energies of some quantum dots (QDs) deviate from the predictions of traditional elastic continuum models. Recent experiments have revealed that these deviations can be tuned by changing the ligands that passivate the QD surface. This observation has led to speculation that these deviations are due to a mass-loading effect of the surface ligands. In this article, we address this speculation by formulating a continuum elastic theory that includes the mass-loading effects of the surface ligands. We demonstrate that this model is capable of accurately reproducing the $l = 0$ phonon energy across variety of different QD samples, including cores with different ligand identities and epitaxially grown CdSe/CdS core/shell heterostructures. We highlight that our model performs well even in the small QD regime, where traditional elastic continuum models are especially prone to failure. Furthermore, we show that our model combined with Raman measurements can be used to infer the elastic properties of surface bound ligands, such as sound velocities and elastic moduli, that are otherwise challenging.

physics.chem-ph↗