Searcharxiv⌕ Search

arXiv subjects

William D. Compton

Publications and source records attributed to William D. Compton.

12 recordsLinked to original sources

Chasing Stability: Humanoid Running via Control Lyapunov Function Guided Reinforcement Learning

Achieving highly dynamic behaviors on humanoid robots, such as running, requires controllers that are both robust and precise, and hence difficult to design. Classical control theory offers principled tools for stabilizing such systems but struggles to synthesize real-time controllers for their nonlinear, hybrid dynamics; reinforcement learning (RL) handles these dynamics well but typically depends on extensive hand-tuning of heuristic rewards. In this work, we embed ideas from nonlinear control theory, specifically control Lyapunov functions (CLFs), along with optimized reference trajectories for the hybrid system into the reinforcement learning reward. This approach, CLF-RL, replaces the need to handcraft and tune heuristic reward terms with easy to tune stability informed rewards. We further develop a trajectory optimization routine that can handle the hybrid structure of the system to produce dynamically feasible, multi-domain, trackable references; using full-order dynamics rather than a kinematic approximation yields up to a 1.7x improvement in position tracking. The resulting policy runs on a Unitree G1 humanoid with a full flight phase, operating reliably in tight corridors such as a treadmill as well as in outdoor environments, all while remaining robust to disturbances applied to the torso and feet. Moreover, it achieves accurate global reference tracking utilizing only on-board sensors, making a critical step toward integrating these dynamic motions into a full autonomy stack.

cs.RO↗

Generate, Track, Improve: Perceptive Multi-Skill Humanoid Locomotion with RL-Fine-Tuned Motion Generators

General purpose humanoids require locomotion controllers that are multi-skill, perceptive, dynamic, and robust enough to go anywhere humans can. In this work, we present a two layer locomotion architecture: (1) a perceptive flow matching motion generator plans whole body trajectories from raw depth images while a (2) perceptive tracking policy trained with control-guided RL follows these motions. Both policies are trained on a library of terrain consistent motion clips created with dynamically optimized human data which yields both accurate velocity tracking and terrain consistent references. Our central contribution is a simple yet effective off-policy RL fine tuning loop that improves the motion generator. A structured search method is used with the generator to gather data for advantage weighted regression. This off-policy loop is much more sample efficient than on-policy residual fine tuning and improves terrain consistency on unseen geometries and skill compositions. We find that successful terrain traversals increased by up to 25 percentage points and skill selection improved by up to 80 percentage points. By using raw depth images to perceive the environment no odometry or height maps are needed, and outdoor deployment is easy. With two cameras, the policy can see terrain coming from further away and adjust its velocity regardless of the commanded speed so it can traverse the terrain. A single policy pair enables a Unitree G1 humanoid to walk, run, stand, jump on and off of boxes, and traverse stairs in outdoor environments. Project page: https://zolkin1.github.io/generate-track-improve/

cs.RO↗

Learning Safe Humanoid Navigation from Reduced Order Models

Research in humanoid robotics has achieved rapid progress in locomotion, and recent results have pushed the boundary on autonomous navigation. We demonstrate that a standard single-stage RL navigation pipeline struggles to scale to multi-level and multi-story terrain, limited by the difficulty of complex humanoid terrain interactions such as stairs. To overcome this challenge, we decompose the navigation problem into two pieces. First, we train a policy operating on the reduced order dynamics but with full 3D LiDAR observations to navigate complex, multi-story terrain. We then utilize this navigation knowledge to kickstart a policy operating on the full-order humanoid dynamics, with a frozen locomotion policy in the loop. Additionally, we demonstrate that applying a Poisson safety filter to the navigation policy output recovers safety in the presence of out-of-distribution obstacles, without dropping navigation success rate. We demonstrate the resulting RoM-Nav policy on a Unitree G1, accomplishing mapless multi-floor navigation covering trials with over 10m of vertical displacement and over 100m of path length. Project page with videos https://wdc3iii.github.io/rom-nav/ .

cs.RO↗

Terrain Consistent Reference-Guided RL for Humanoid Navigation Autonomy

We present a method for training reference-guided, perceptive reinforcement learning locomotion policies for humanoid robots in which reference trajectories are modulated in training to be consistent with terrain geometry. Aiming to deploy our method with standard navigation autonomy infrastructure, we synthesize SE(2)-controllable reference trajectories inside the RL training loop, projecting desired footsteps onto valid footholds and adjusting swing-foot and center-of-mass trajectories to match the terrain. The resulting policy exposes a clean SE(2) velocity interface compatible with standard navigation planners. In simulation, environmentally-conditioned references significantly improve reference tracking performance compared to environment agnostic references. On hardware, we integrate the policy with an MPC + control barrier function planner and demonstrate long-horizon (>70m) closed-loop autonomous navigation on the Unitree G1 through outdoor environments containing rough terrain and consecutive flights of stairs, with all sensing and computation onboard.

cs.RO↗

Stability of Control Lyapunov Function Guided Reinforcement Learning

Reinforcement learning (RL) has become the de facto method for achieving locomotion on humanoid robots in practice, yet stability analysis of the corresponding control policies is lacking. Recent work has attempted to merge control theoretic ideas with reinforcement learning through control guided learning. A notable example of this is the use of a control Lyapunov function (CLF) to synthesize the reinforcement learning rewards, a technique known as CLF-RL, which has shown practical success. This paper investigates the stability properties of optimal controllers using CLF-RL with the goal of bridging experimentally observed stability with theoretical guarantees. The RL problem is viewed as an optimal control problem and exponential stability is proven in both continuous and discrete time using both core CLF reward terms and the additional terms used in practice. The theoretical bounds are numerically verified on systems such as the double integrator and cart-pole. Finally, the CLF guided rewards are implemented for a walking humanoid robot to generate stable periodic orbits.

eess.SY↗

Chasing Autonomy: Dynamic Retargeting and Control Guided RL for Performant and Controllable Humanoid Running

Humanoid robots have the promise of locomoting like humans, including fast and dynamic running. Recently, reinforcement learning (RL) controllers that can mimic human motions have become popular as they can generate very dynamic behaviors, but they are often restricted to single motion play-back which hinders their deployment in long duration and autonomous locomotion. In this paper, we present a pipeline to dynamically retarget human motions through an optimization routine with hard constraints to generate improved periodic reference libraries from a single human demonstration. We then study the effect of both the reference motion and the reward structure on the reference and commanded velocity tracking, concluding that a goal-conditioned and control-guided reward which tracks dynamically optimized human data results in the best performance. We deploy the policy on hardware, demonstrating its speed and endurance by achieving running speeds of up to 3.3 m/s on a Unitree G1 robot and traversing hundreds of meters in real-world environments. Additionally, to demonstrate the controllability of the locomotion, we use the controller in a full perception and planning autonomy stack for obstacle avoidance while running outdoors.

cs.RO↗

Walk the PLANC: Physics-Guided RL for Agile Humanoid Locomotion on Constrained Footholds

Bipedal humanoid robots must precisely coordinate balance, timing, and contact decisions when locomoting on constrained footholds such as stepping stones, beams, and planks -- even minor errors can lead to catastrophic failure. Classical optimization and control pipelines handle these constraints well but depend on highly accurate mathematical representations of terrain geometry, making them prone to error when perception is noisy or incomplete. Meanwhile, reinforcement learning has shown strong resilience to disturbances and modeling errors, yet end-to-end policies rarely discover the precise foothold placement and step sequencing required for discontinuous terrain. These contrasting limitations motivate approaches that guide learning with physics-based structure rather than relying purely on reward shaping. In this work, we introduce a locomotion framework in which a reduced-order stepping planner supplies dynamically consistent motion targets that steer the RL training process via Control Lyapunov Function (CLF) rewards. This combination of structured footstep planning and data-driven adaptation produces accurate, agile, and hardware-validated stepping-stone locomotion on a humanoid robot, substantially improving reliability compared to conventional model-free reinforcement-learning baselines.

cs.RO↗

Learning for Layered Safety-Critical Control with Predictive Control Barrier Functions

Safety filters leveraging control barrier functions (CBFs) are highly effective for enforcing safe behavior on complex systems. It is often easier to synthesize CBFs for a Reduced order Model (RoM), and track the resulting safe behavior on the Full order Model (FoM) -- yet gaps between the RoM and FoM can result in safety violations. This paper introduces \emph{predictive CBFs} to address this gap by leveraging rollouts of the FoM to define a predictive robustness term added to the RoM CBF condition. Theoretically, we prove that this guarantees safety in a layered control implementation. Practically, we learn the predictive robustness term through massive parallel simulation with domain randomization. We demonstrate in simulation that this yields safe FoM behavior with minimal conservatism, and experimentally realize predictive CBFs on a 3D hopping robot.

eess.SY↗

Safety-Critical Controller Synthesis with Reduced-Order Models

Reduced-order models (ROMs) provide lower dimensional representations of complex systems, capturing their salient features while simplifying control design. Building on previous work, this paper presents an overarching framework for the integration of ROMs and control barrier functions, enabling the use of simplified models to construct safety-critical controllers while providing safety guarantees for complex full-order models. To achieve this, we formalize the connection between full and ROMs by defining projection mappings that relate the states and inputs of these models and leverage simulation functions to establish conditions under which safety guarantees may be transferred from a ROM to its corresponding full-order model. The efficacy of our framework is illustrated through simulation results on a drone and hardware demonstrations on ARCHER, a 3D hopping robot.

eess.SY↗

Dynamic Tube MPC: Learning Tube Dynamics with Massively Parallel Simulation for Robust Safety in Practice

Safe navigation of cluttered environments is a critical challenge in robotics. It is typically approached by separating the planning and tracking problems, with planning executed on a reduced order model to generate reference trajectories, and control techniques used to track these trajectories on the full order dynamics. Inevitable tracking error necessitates robustification of the nominal plan to ensure safety; in many cases, this is accomplished via worst-case bounding, which ignores the fact that some trajectories of the planning model may be easier to track than others. In this work, we present a novel method leveraging massively parallel simulation to learn a dynamic tube representation, which characterizes tracking performance as a function of actions taken by the planning model. Planning model trajectories are then optimized such that the dynamic tube lies in the free space, allowing a balance between performance and safety to be traded off in real time. The resulting Dynamic Tube MPC is applied to the 3D hopping robot ARCHER, enabling agile and performant navigation of cluttered environments, and safe collision-free traversal of narrow corridors.

cs.RO↗

Dynamically Feasible Path Planning in Cluttered Environments via Reachable Bezier Polytopes

The deployment of robotic systems in real world environments requires the ability to quickly produce paths through cluttered, non-convex spaces. These planned trajectories must be both kinematically feasible (i.e., collision free) and dynamically feasible (i.e., satisfy the underlying system dynamics), necessitating a consideration of both the free space and the dynamics of the robot in the path planning phase. In this work, we explore the application of reachable Bezier polytopes as an efficient tool for generating trajectories satisfying both kinematic and dynamic requirements. Furthermore, we demonstrate that by offloading specific computation tasks to the GPU, such an algorithm can meet tight real time requirements. We propose a layered control architecture that efficiently produces collision free and dynamically feasible paths for nonlinear control systems, and demonstrate the framework on the tasks of 3D hopping in a cluttered environment.

cs.RO↗

Robust Agility via Learned Zero Dynamics Policies

We study the design of robust and agile controllers for hybrid underactuated systems. Our approach breaks down the task of creating a stabilizing controller into: 1) learning a mapping that is invariant under optimal control, and 2) driving the actuated coordinates to the output of that mapping. This approach, termed Zero Dynamics Policies, exploits the structure of underactuation by restricting the inputs of the target mapping to the subset of degrees of freedom that cannot be directly actuated, thereby achieving significant dimension reduction. Furthermore, we retain the stability and constraint satisfaction of optimal control while reducing the online computational overhead. We prove that controllers of this type stabilize hybrid underactuated systems and experimentally validate our approach on the 3D hopping platform, ARCHER. Over the course of 3000 hops the proposed framework demonstrates robust agility, maintaining stable hopping while rejecting disturbances on rough terrain.

cs.RO↗