SearcharxivSearch

arXiv subjects

William Kindel

Publications and source records attributed to William Kindel.

7 recordsLinked to original sources

Above 99.9% Fidelity Single-Qubit Gates, Two-Qubit Gates, and Readout in a Single Superconducting Quantum Device

Achieving high-fidelity single-qubit gates, two-qubit gates, and qubit readout is critical for building scalable, error-corrected quantum computers. However, device parameters that enhance one operation often degrade the others, making simultaneous optimization challenging. Here, we demonstrate that careful tuning of qubit-coupler coupling strengths in a superconducting circuit with two transmon qubits coupled via a tunable coupler enables high-fidelity single- and two-qubit gates, without compromising readout performance. As a result, we achieve a 40h-averaged CZ gate fidelity of 99.93%, simultaneous single-qubit gate fidelities of 99.98%, and readout fidelities over 99.94% in a single device. These results are enabled by optimized coupling parameters, an efficient CZ gate calibration experiment based on our new Phased-Averaged Leakage Error Amplification (PALEA) protocol, and a readout configuration compatible with high coherence qubits. Our results demonstrate a viable path toward scaling up superconducting quantum processors while maintaining consistently high fidelities across all core operations.

quant-ph

Quantum error detection in qubit-resonator star architecture

Achieving industrial quantum advantage is unlikely without the use of quantum error correction (QEC). Other QEC codes beyond surface code are being experimentally studied, such as color codes and quantum Low-Density Parity Check (qLDPC) codes, that could benefit from new quantum processing unit (QPU) architectures. We introduce the six-qubit star lattice architecture that offers parallelism and effective local all-to-all connectivity and thus enables hardware-efficient implementation of certain QEC codes. As a first demonstration of this new architecture, we encode two logical qubits in a six-qubit superconducting QPU with a star-topology using the [[4, 2, 2]] code and characterize the logical states with the classical shadow framework. Logical life-time and logical error rate are measured over repeated quantum error detection cycles for various logical states including a logical Bell state. We measure logical state fidelities above 96 % for every cardinal logical state, find logical life-times above the best physical element, and logical error-per-cycle values ranging from 0.25(2) % to 0.91(3) %. In future, such star QPU can be tiled to enable QEC codes with high-weight and overlapping stabilizers for improved encoding rates.

quant-ph

Quantum algorithms for simulating systems coupled to bosonic modes using a hybrid resonator-qubit quantum computer

Modeling composite systems of spins or electrons coupled to bosonic modes is of significant interest for many fields of applied quantum physics and chemistry. A quantum simulation can allow for the solution of quantum problems beyond classical numerical methods. However, implementing this on existing noisy quantum computers can be challenging due to the mapping between qubits and bosonic degrees of freedom, often requiring a large number of qubits or deep quantum circuits. In this work, we discuss quantum algorithms to solve composite systems by augmenting conventional superconducting qubits with microwave resonators used as computational elements. This enables direct representation of bosonic modes by resonators. We derive efficient algorithms for typical models and propose a device connectivity that allows for feasible scaling of simulations with linear overhead. We also show how the dissipation of resonators can be a useful parameter for modeling continuous bosonic baths. Experimental results demonstrating these methods were obtained on the IQM Resonance cloud platform, based on high-fidelity gates and tunable couplers. These results present the first digital quantum simulation including a computational resonator on a commercial quantum platform.

quant-ph

A Superconducting Qubit-Resonator Quantum Processor with Effective All-to-All Connectivity

In this work we introduce a superconducting quantum processor architecture that uses a transmission-line resonator to implement effective all-to-all connectivity between six transmon qubits. This architecture can be used as a test-bed for algorithms that benefit from high connectivity. We show that the central resonator can be used as a computational element, which offers the flexibility to encode a qubit for quantum computation or to utilize its bosonic modes which further enables quantum simulation of bosonic systems. To operate the quantum processing unit (QPU), we develop and benchmark the qubit-resonator conditional Z gate and the qubit-resonator MOVE operation. The latter allows for transferring a quantum state between one of the peripheral qubits and the computational resonator. We benchmark the QPU performance and achieve a genuinely multi-qubit entangled Greenberger-Horne-Zeilinger (GHZ) state over all six qubits with a readout-error mitigated fidelity of $0.86$.

quant-ph

Optical Nanofiber Testbeds for Benchmarking Membrane-Waveguide Photonic Integrated Circuit Platforms toward On-Chip Quantum Inertial Sensing

Recent advances in cold atom interferometry with optical and magnetic atom guides have set the stage for quantum inertial sensors capable of operating in dynamic environments. In this work, we present three key innovations, such as evanescent-field (EF) atom guides, optical nanofiber testbeds, and membrane-waveguide photonic integrated circuit (PIC) platforms, to advance EF-guided atom interferometry. First, we demonstrate EF atom guides on optical nanofiber testbeds, which serve as performance benchmarks for our membrane-waveguide PIC platforms. Second, we achieve low-power (~5 mW) guiding of freely moving, laser-cooled 133Cs atoms in two-color, traveling-wave EF optical dipole traps at the novel, heat-efficient magic wavelengths of 793 nm and 937 nm (i.e. "793/937-nm EF atom guides"). We designed and fabricated membrane-waveguide PIC platforms for these EF atom guides; in our prior work we showed that they safely handle up to 4-6x times the minimum trap power under vacuum and enable dense cold atom generation for efficient loading. Third, we verify preserved atomic coherence via microwave fields and EF-coupled Doppler-free Raman beams; to our knowledge, this is the first report of coherence fringes driven by co-propagating EF-coupled Raman beams with only 150 nW of total optical power. By providing a direct comparison between optical nanofiber testbeds and membrane-waveguide PIC platforms, our results lay critical groundwork for the on-chip realization of EF-guided atom interferometry and the development of for fully integrated, low-SWaP (size, weight, and power) quantum accelerometers and gyroscopes.

physics.atom-ph

A Compact Cold-Atom Interferometer with a High Data-Rate Grating Magneto-Optical Trap and a Photonic-Integrated-Circuit-Compatible Laser System

The extreme miniaturization of a cold-atom interferometer accelerometer requires the development of novel technologies and architectures for the interferometer subsystems. Here we describe several component technologies and a laser system architecture to enable a path to such miniaturization. We developed a custom, compact titanium vacuum package containing a microfabricated grating chip for a tetrahedral grating magneto-optical trap (GMOT) using a single cooling beam. In addition, we designed a multi-channel photonic-integrated-circuit-compatible laser system implemented with a single seed laser and single sideband modulators in a time-multiplexed manner, reducing the number of optical channels connected to the sensor head. In a compact sensor head containing the vacuum package, sub-Doppler cooling in the GMOT produces 15 uK temperatures, and the GMOT can operate at a 20 Hz data rate. We validated the atomic coherence with Ramsey interferometry using microwave spectroscopy, then demonstrated a light-pulse atom interferometer in a gravimeter configuration for a 10 Hz measurement data rate and T = 0 - 4.5 ms interrogation time, resulting in $Δ$ g / g = 2.0e-6. This work represents a significant step towards deployable cold-atom inertial sensors under large amplitude motional dynamics.

physics.atom-ph

Characterization of Suspended Membrane Waveguides towards a Photonic Atom Trap Integrated Platform

We demonstrate an optical waveguide device, capable of supporting the high, in-vacuum, optical power necessary for trapping a single atom or a cold atom ensemble with evanescent fields. Our photonic integrated platforms, with suspended membrane waveguides, successfully manages optical powers of 6 mW (500 um span) to nearly 30 mW (125 um span) over an un-tethered waveguide span. This platform is compatible with laser cooling and magneto-optical traps (MOTs) in the vicinity of the suspended waveguide, called the membrane MOT and the needle MOT, a key ingredient for efficient trap loading. We evaluate two novel designs that explore critical thermal management features that enable this large power handling. This work represents a significant step toward an integrated platform for coupling neutral atom quantum systems to photonic and electronic integrated circuits on silicon.

quant-ph