arXiv subjects

Wilson J. Yánez-Parreño

Publications and source records attributed to Wilson J. Yánez-Parreño.

6 recordsLinked to original sources

arXiv2026

Digital Etching of Single-Crystalline Silicon Fin Barriers Down to Sub-10 nm

This work presents a fabrication process to realize sub-10 nm-thick, high-aspect-ratio Si fins using high-resistivity float-zone single-crystal Si wafers. Following anisotropic wet etching, a digital etching process based on repeated rapid thermal annealing (RTA) oxidation and vapor-phase hydrofluoric acid (VHF) etching of the resulting oxide was developed, enabling thinning of Si fins into the sub-10 nm regime. Cross-sectional scanning transmission electron microscopy confirms fin thicknesses as thin as 6 nm, although with a tapered profile resulting from the initial anisotropic wet etch. Tapering of the fin was reduced by using an N{_2}/O{_2} (5:1) ambient together with a reduced ramp rate during the temperature ramping for the RTA oxidation process. A thickness variation of 3 nm along a 1.2 μm tall fin was achieved on a fin with 12 nm near the top and 15 nm near the base. The developed process provides a pathway for fabricating Josephson junctions, setting a foundation toward reproducible and scalable superconducting qubit fabrication with single-crystal Si dielectric barriers using readily available Si processing technology.

cond-mat.mtrl-sci↗

arXiv2026

Highly Lattice-Mismatched Selective Area Epitaxy and Coalescence of PbSe Nanostructures on GaAs

Selective area growth of PbSe has the potential to realize deterministic placement of high-density, defect-tolerant nanostructure networks toward a scalable quantum platform. PbSe is a narrow bandgap semiconductor with advantageous (opto)electronic properties that has been shown to have a desirable defect-tolerance, enabling bright emission even when grown on highly-dissimilar platforms, and could be leveraged in combination with selective growth for site-selective quantum emitters and low-disorder hybrid nanowire networks. In this work, we achieve site-selective growth of well-faceted and ordered PbSe nanostructures, despite a large 8% lattice mismatch. Structural and morphological characterization reveal that $>$99% of selectively grown islands within 100 nm opening are single-orientation and cube-on-cube oriented with sub-nm root-mean-square surface roughness. Defect analysis showed that 74% of the islands and 86% of the coalesced regions between different mask openings were free of threading dislocations. These PbSe islands achieved equivalent emission in the mid-infrared despite having a higher surface-to-volume ratio than the planar control. Further, we present a gate-tunable two-terminal Josephson junction fabricated from the PbSe nanowires grown with conditions identified in this study. The combination of the accessible selective growth regime, morphological control of island growth and demonstrations of optical and electrical transport properties indicates promise for PbSe SAG as a defect-tolerant scalable quantum platform.

cond-mat.mtrl-sci↗

arXiv2025

Cryogenic growth of aluminum: structural morphology, optical properties, superconductivity and microwave dielectric loss

We explore the molecular beam epitaxy synthesis of superconducting aluminum thin films grown on c-plane sapphire substrates at cryogenic temperatures of 6 K and compare their behavior with films synthesized at room temperature. We demonstrate that cryogenic growth increases structural disorder, producing crystalline grains that modify the optical, electrical, and superconducting properties of aluminum. We observe that cryogenic deposition changes the color of aluminum from fully reflective to yellow and correlate the pseudo-dielectric function and reflectance with structural changes in the film. We find that smaller grain sizes enhance the superconductivity of aluminum, increasing its critical temperature and critical field. We then estimate the superconducting gap and coherence length of Cooper pairs in aluminum in the presence of disorder. Finally, we fabricate superconducting microwave resonators on these films and find that, independently of the growth temperature, the system is dominated by two-level system loss with similar quality factors in the high and low power regimes. We further measure a higher kinetic inductance in the cryogenically grown films.

cond-mat.supr-con↗

arXiv2025

Charge to spin conversion in atomically thin bismuth

We report charge to spin conversion in a hybrid heterostructure comprised of atomically thin bismuth (Bi) confined between a silicon carbide (SiC) substrate and epitaxial graphene (EG). We confirm composition, dimensionality, and a 96.5 \% intercalation coverage using X-ray photolectron spectroscopy, scanning transmission microscopy, low energy electron diffraction, and Raman spectroscopy. Electrical transport measurements show signs of weak antilocalization in the heterostructure, consistent with spin-orbit coupling in this hybrid heterostructure. Spin torque ferromagnetic resonance measurements in permalloy/EG/2D-Bi heterostructures probe charge-to-spin conversion and revealing that an in plane polarization of the spin current, perpendicular to the charge current. The ratio of the in-plane to out-of-plane torque is 3.75 times higher than in hydrogenated graphene control samples.

cond-mat.mes-hall↗

arXiv2024

Hybridization gap approaching the two-dimensional limit of topological insulator Bi$_x$Sb$_{1-x}$

Bismuth antimony alloys (Bi$_x$Sb$_{1-x}$) provide a tuneable materials platform to study topological transport and spin-polarized surface states resulting from the nontrivial bulk electronic structure. In the two-dimensional limit, it is a suitable system to study the quantum spin Hall effect. In this work we grow epitaxial, single orientation thin films of Bi$_x$Sb$_{1-x}$ on an InSb(111)B substrate down to two bilayers where hybridization effects should gap out the topological surface states. Supported by a tight-binding model, spin- and angle-resolved photoemission spectroscopy data shows pockets at the Fermi level from the topological surface states disappear as the bulk gap increases from confinement. Evidence for a gap opening in the topological surface states is shown in the ultrathin limit. Finally, we observe spin-polarization approaching unity from the topological surface states in 10 bilayer films. The growth and characterization of ultrathin Bi$_x$Sb$_{1-x}$ alloys suggest ultrathin films of this material system can be used to study two-dimensional topological physics as well as applications such as topological devices, low power electronics, and spintronics.

cond-mat.mtrl-sci↗

arXiv2024

Cryogenic growth of tantalum thin films for low-loss superconducting circuits

Motivated by recent advancements highlighting Ta as a promising material in low-loss superconducting circuits and showing long coherence times in superconducting qubits, we have explored the effect of cryogenic temperatures on the growth of Ta and its integration in superconducting circuits. Cryogenic growth of Ta using a low temperature molecular beam epitaxy (MBE) system is found to stabilize single phase $α$-Ta on several different substrates, which include Al$\mathrm{_2}$O$\mathrm{_3}$(0001), Si(001), Si(111), SiN${_x}$, and GaAs(001). The substrates are actively cooled down to cryogenic temperatures and remain < 20 K during the Ta deposition. X-ray $θ$-2$θ$ diffraction after warming to room temperature indicates the formation of polycrystalline $α$-Ta. The 50 nm $α$-Ta films grown on Al$\mathrm{_2}$O$\mathrm{_3}$(0001) at a substrate manipulator temperature of 7 K have a room temperature resistivity ($\mathrm{ρ_{300 K}}$) of 13.4 $\mathrm{μΩ}$cm, a residual resistivity ratio (RRR) of 17.3 and a superconducting transition temperature (T$_C$) of 4.14 K, which are comparable to bulk values. In addition, atomic force microscopy (AFM) indicates that the film grown at 7 K with an RMS roughness of 0.45 nm was significantly smoother than the one grown at room temperature. Similar properties are found for films grown on other substrates. Results for films grown at higher substrate manipulator temperatures show higher $\mathrm{ρ_{300 K}}$, lower RRR and Tc, and increased $β$-Ta content. Coplanar waveguide resonators with a gap width of 3 $\mathrmμ$m fabricated from cryogenically grown Ta on Si(111) and Al$\mathrm{_2}$O$\mathrm{_3}$(0001) show low power Q$_i$ of 1.9 million and 0.7 million, respectively, indicating polycrystalline $α$-Ta films may be promising for superconducting qubit applications even though they are not fully epitaxial.

cond-mat.supr-con↗