Searcharxiv⌕ Search

arXiv subjects

Wilson Román Acevedo

Publications and source records attributed to Wilson Román Acevedo.

5 recordsLinked to original sources

Device-area selection of memristive transport regimes in epitaxial $Hf_{0.5}Zr_{0.5}O_{2}$-based ferroelectric devices

Ferroelectric memristive devices based on hafnia are promising systems for neuromorphic electronics, yet the interplay between polarization-modulated resistive changes and defect-mediated transport often leads to complex and debated switching mechanisms. Here, we investigate this competition in epitaxial Hf$_{0.5}$Zr$_{0.5}$O$_2$/La$_{0.67}$Sr$_{0.33}$MnO$_3$ heterostructures with Pt top electrodes, by combining structural, ferroelectric, and memristive characterization with a statistical analysis across a broad range of device areas spanning three orders of magnitude. We identify two distinct memristive regimes with opposite resistance-voltage chiralities. Small devices exhibit a low-resistance state that scales inversely with area, consistent with area-distributed electronic transport, while larger devices display an area-independent resistance indicative of localized conductive channels. A statistical nucleation model quantitatively captures this behavior and yields a crossover characteristic area $A^* \approx 10^3\,μ\mathrm{m}^2$. This crossover also correlates with the onset of ferroelectric wake-up for the larger devices, linking conductive-channel nucleation and oxygen-vacancy redistribution within a unified physical picture. These results establish lateral device size as a key parameter controlling the dominant transport mechanism in epitaxial hafnia-based devices.

cond-mat.mtrl-sci↗

Oxygen vacancy engineering in pulsed laser deposited BaSnO$_3$ thin films on SrTiO$_3$

We demonstrate the tunability of oxygen content in pulsed laser deposition (PLD)-grown barium stannate (BaSn$O_3$, BSO) thin films by precisely controlling the background oxygen pressure over a broad range from 0.0004 mbar to 0.13 mbar. The introduction of oxygen vacancies significantly alters the structural properties of BSO films, inducing a monotonic expansion of the out-of-plane lattice parameter and cell volume as the vacancy concentration increases. The progressive formation of oxygen vacancies was spectroscopically tracked using X-ray photoelectron spectroscopy (XPS), providing direct insight into the vacancy evolution. Furthermore, we show that the oxygen stoichiometry in BSO plays a critical role in modulating the sheet resistance of BSO/LaScO$_3$ heterostructures, enabling interface metallic electron conduction. This oxygen content control offers a robust strategy to tailor the electronic properties at the interface, highlighting its potential for oxide electronics and functional interface engineering.

cond-mat.mtrl-sci↗

Electrically-driven control of nanoscale chemical changes in amorphous complex oxide memristive devices

Our study demonstrates that strong cationic segregation can occur in amorphous complex oxide memristors during electrical operation. With the help of analytic techniques, we observed that switching the electrical stimulation from voltage to current significantly prevents structural changes and cation segregation at the nanoscale, improving also the device cycle-to-cycle variability. These findings could contribute to the design of more reliable oxide-based memristors and underscore the crucial effect that has the type of electrical stimulation applied to the devices on their integrity and reliability.

cond-mat.mtrl-sci↗

Multi-mem behavior at reduced voltages in La$_{1/2}$Sr$_{1/2}$Mn$_{1/2}$Co$_{1/2}$O$_{3-x}$ perovskite modified with Sm:CeO$_2$

Neuromorphic computing aims to mimic the architecture and the information processing mechanisms of the mammalian brain, appearing as the only avenue that offers significant energy savings compared to the standard digital computers. Memcapacitive devices (which can change their capacitance between different non-volatile states upon the application of electrical stimulation) can significantly reduce the energy consumption of bioinspired circuitry. In the present work, we study the multimem (memristive and memcapacitive) behavior of devices based on thin films of the topotactic redox La$_{1/2}$Sr$_{1/2}$Mn$_{1/2}$Co$_{1/2}$O$_{3-x}$ (LSMCO) perovskite modified with Sm:Ce$O_2$ (SCO), grown on Nb:SrTiO$_{3}$ with (001) and (110) out of plane orientations. Either the self assembling at the nanoscale of both LSMCO and SCO phases or the doping with Ce(Sm) of the LSMCO perovskite were observed for different fabrication conditions and out of plane orientations. The impact of these changes on the device electrical behavior was determined. The optimum devices resulted those with (110) orientation and Ce(Sm) doping the perovskite. These devices displayed a multimem behavior with robust memcapacitance and significantly lower operation voltages (especially the RESET voltage) in comparison with devices based on pristine LSMCO. In addition, they were able to endure electrical cycling (and the concomitant perovskite topotactic redox transition between oxidized and reduced phases) without suffering nanostructural or chemical changes. We link these properties to an enhanced perovskite reducibility upon Ce(Sm) doping. Our work contributes to increase the reliability of LSMCO based multimem systems and to reduce their operating voltages closer to the 1 V threshold, which are key issues for the development of nanodevices for neuromorphic or in memory computing.

physics.app-ph↗

Oxygen vacancies dynamics in redox-based interfaces: Tailoring the memristive response

Redox-based memristive devices are among the alternatives for the next generation of non volatile memories, but also candidates to emulate the behavior of synapses in neuromorphic computing devices. It is nowadays well established that the motion of oxygen vacancies (OV) at the nanoscale is the key mechanism to reversibly switch metal/insulator/metal structures from insulating to conducting, i.e. to accomplish the resistive switching effect. The control of OV dynamics has a direct effect on the resistance changes, and therefore on different figures of memristive devices, such as switching speed, retention, endurance or energy consumption. Advances in this direction demand not only experimental techniques that allow for measurements of OV dynamics, but also of theoretical studies that shed light on the involved mechanisms. Along this goal, we analize the OV dynamics in redox interfaces formed when an oxidizable metallic electrode is in contact with the insulating oxide. We show how the transfer of OV can be manipulated by using different electrical stimuli protocols to optimize device figures such as the ON/OFF ratio or the energy dissipation linked to the writing process. Analytical expressions for attained resistance values, including the high and low resistance states are derived in terms of total transferred OV in a nanoscale region of the interface. Our predictions are validated with experiments performed in Ti/La$_{1/3}$Ca$_{2/3}$MnO$_{3}$ redox memristive devices.

cond-mat.mes-hall↗