arXiv subjects

Witlef Wieczorek

Publications and source records attributed to Witlef Wieczorek.

At least 19 recordsLinked to original sources

arXiv2026

Controlling rotations of magnetically levitated superconductors

Magnetically trapped type-I superconductors are promising candidates for precision experiments at the quantum-to-classical borderline, with applications in quantum sensing of forces and accelerations and fundamental tests of quantum physics. Here, we show how the rotational motion of micron-sized superconductors is strongly affected by (i) the diamagnetic torques due to the gradient of the trapping field and by (ii) the gyromagnetic coupling due to Einstein-de Haas and Barnett effects. We show that this allows the three-dimensional alignment of asperhical superconductors in the trap center, as required for future sensing applications and quantum experiments, and determine the resulting librational trapping frequencies. Finally, we propose an experiment to probe gyromagnetic coupling in levitated superconductors and we discuss how it can be used to control the particle rotation.

quant-ph↗

arXiv2026

Optomechanical systems with a Fano membrane in the middle

Conventional membrane-in-the-middle (MIM) optomechanical systems offer limited control over the optical linewidth, which can limit their performance when operating in the unresolved-sideband regime. We investigate cavity optomechanics with a photonic-crystal Fano membrane placed at the center of a Fabry-Pérot (FP) cavity. In contrast to a conventional dielectric membrane, the photonic-crystal membrane supports a localized optical resonance, which hybridizes with the cavity field and enables spectral engineering of the relevant optical modes. Besides the usual dispersive optomechanical coupling associated with cavity-length changes, the membrane motion also modifies the Fano-mode resonance and its hybridization with the cavity field. We consider two limits set by the membrane reflectivity: a transparent-membrane regime with a single FP-like mode, and a reflective-membrane regime with two coupled subcavity modes. In the latter case, only the symmetric cavity mode hybridizes with the Fano mode, while the antisymmetric mode remains decoupled. Using quantum Langevin equations together with a transfer-matrix description of the optical scattering problem, we show that the Fano-induced hybridization can generate narrow optical normal modes that remain efficiently accessible to the external drive for experimentally realistic parameters. These modes can provide effective sideband resolution and enable ground-state cooling of the membrane motion even when the bare cavity is in the unresolved-sideband regime. Our results establish Fano MIM systems as a promising platform for spectral and optomechanical engineering.

physics.optics↗

arXiv2026

Niobium Titanium Nitride as a High Tensile Stress Material for Nanomechanics

Over the past decades, high-coherence mechanical resonators have been continuously pushed to new limits, using techniques such as dissipation dilution and clamp-tapering to enhance their quality factor beyond intrinsic material limitations. Today, these mechanical resonators are often fabricated from silicon-nitride, silicon-carbide or aluminum. Recently, however, interest in novel material platforms has grown, especially those allowing for the integration within superconducting circuits. Among these, superconducting nitrides stand out as particularly promising due to their high transition temperatures compared to elementary superconductors. Here, we introduce them as nanomechanical resonators and report on the fabrication and characterization of highly stressed, doubly clamped niobium titanium nitride (NbTiN) nanostring resonators. Using optical interferometry, we determine the elastic properties and mechanical quality factor from room temperature to 13 K. We observe high tensile stress up to 0.81 GPa along with a Young's modulus of 181 GPa and an intrinsic mechanical quality factor up to 850. With these favorable mechanical properties, NbTiN constitutes a promising material platform for future applications in cavity electro- and nanomechanics.

quant-ph↗

arXiv2026

Macroscopic Quantum Interference of the Center-of-Mass Motion of Levitated Superconducting Microparticles enabled by Magnetic Higher-Order Traps

We show how magnetostatic higher-order multipole traps can be used to generate macroscopic quantum interference of the motion of levitated superconducting microparticles. An appropriate combination of multipolar magnetic fields offers great versatility in constructing various trap potentials, including anharmonic trap potentials such as Duffing or double-well types. Crucially, the anharmonic trap potentials realize a nonlinearity on the order of hundred times the zero-point motion, i.e., on a length scale below nanometers. These anharmonic potentials allow for the generation of quantum features of the center-of-mass motion of a magnetically levitated superconducting microparticle. Importantly, they can be easily generated with a static arrangement of coils, requiring only that the current running through them is tunable. We propose protocols exploiting the versatility of the magnetic trap landscape to generate non-Gaussian motional states. We solve the dynamics of the center-of-mass motion of the particle in phase space and analyze its parameter dependence. Furthermore, we give a recipe to distinguish classical from quantum behavior in a statistically meaningful way through measurement of the position of the particle. Our results open a path to accessing the quantum regime of the center-of-mass motion of objects with masses larger than picogram, i.e., $10^{13}$ atomic mass units. This will enable fundamental physics experiments for studying the transition between quantum and classical behavior, exploring the intersection between quantum physics and gravity as well as probing of certain types of dark matter.

quant-ph↗

arXiv2026

Nonlinear quantum optomechanics in a Fano-mirror microcavity system

We study a Fano-mirror optomechanical system in the quantum nonlinear regime. In this system, two strongly lossy optical modes hybridize through both coherent and dissipative couplings to form an effective optical mode with a drastically reduced linewidth. This linewidth reduction enables the system to access the single-photon strong-coupling and sideband-resolved regimes simultaneously. We formulate the system dynamics using an effective master-equation approach and benchmark it against quantum Langevin and dressed-state master-equation descriptions. With experimentally realistic parameters, we predict clear quantum signatures, including photon blockade and the generation of mechanical cat states. Our work establishes the Fano-mirror architecture as a promising platform for harnessing single-photon optomechanical nonlinearities for quantum state engineering under achievable experimental conditions.

quant-ph↗

arXiv2026

Magnetic Omniconversion: Source-Independent Molding of Magnetostatic Fields

Magnetic fields are constrained by the geometry and location of their sources, limiting the ability to freely tailor their spatial distribution. We introduce a general framework to passively convert the magnetic field generated by arbitrary sources into any prescribed desired field within a finite source-free region. Our method relies on field shaping using linear magnetic materials, enabling source-independent magnetic-field molding. We provide the general recipe, analytical and numerical demonstrations for some paradigmatic examples, and a proof-of-concept experiment that validates the idea and materials implementation. This approach enables novel possibilities in magnetic shielding, targeted field delivery, advanced imaging technologies, and a broad range of field-control applications.

physics.app-ph↗

arXiv2025

Efficient flip-chip and on-chip-based modulation of flux-tunable superconducting resonators

We demonstrate the efficient modulation of flux-tunable superconducting resonators (FTRs) using flip-chip or on-chip-based input coils. The FTRs we use are aluminum-based quarter-wave coplanar waveguide resonators terminated with 100um or 200um-wide square loop dc superconducting quantum interference devices (SQUIDs) employing 1um-sized Josephson junctions. We employ SQUIDs with a geometric loop inductance of up to 0.7nH to increase the flux transfer efficiency. The geometric inductance of the SQUID results in a non-zero screening parameter $β_L$, whose branch switching effect is mitigated by using asymmetric junctions. We achieve flux modulation of the FTRs by more than one GHz and flux responsivities of up to tens of GHz/$Φ_0$ with uA-scale on-chip currents. We compare flip-chip with on-chip input-coil-based flux modulation, where the former is realized through galvanically connected and closely spaced chips, while the latter is achieved through superconducting air-bridge connections. We achieve a flux-transfer efficiency from the input coil to the SQUID loop of up to 20%. Our work paves the way for efficient low current flux modulation of FTRs and sensitive measurement of flux signals.

quant-ph↗

arXiv2025

Modification of adhesion between microparticles and engineered silicon surfaces

A key challenge in performing experiments with microparticles is controlling their adhesion to substrates. For example, levitation of a microparticle initially resting on a surface requires overcoming the surface adhesion forces to deliver the microparticle into a mechanical potential acting as a trap. By engineering the surface of silicon substrates, we aim to decrease the adhesion force between a metallic microparticle and the silicon surface. To this end, we investigate different methods of surface engineering that are based on chemical, physical, or physio-chemical modifications of the surface of silicon. We give quantitative results on the detachment force, finding a correlation between the water contact angle and the mean detachment force, indicating that hydrophobic surfaces are desired for low microparticle adhesion. We develop surface preparations decreasing the mean detachment force by more than a factor of three compared to an untreated silicon surface. Our results will enable reliable levitation of microparticles and are relevant for experiments requiring low adhesion between microparticles and a surface.

physics.app-ph↗

arXiv2025

Membrane phononic crystals for high-Qm mechanical defect modes in piezoelectric aluminum nitride

Nanomechanical resonators with exceptionally low dissipation are advancing mechanics-based sensors and quantum technologies. The key for these advances is the engineering of localized phononic modes that are well-isolated from the environment, i.e., that exhibit a high mechanical quality factor, Qm. Membrane phononic crystals fabricated from strained thin films can realize high-Qm single or multiple localized phononic defect modes at MHz frequencies. These defect modes can be efficiently interfaced with out-of-plane light or coupled to a microwave quantum circuit, enabling readout and control of their motion. When membrane phononic crystals are fabricated from a crystalline film, they could offer built-in functionality. We demonstrate a membrane phononic crystal realized in a strained 90 nm-thin film of aluminum nitride (AlN), which is a crystalline piezoelectric material. We engineer a high-Qm localized phononic defect mode at 1.8 MHz with a Qxf-product of 1.5x10^13 Hz at room temperature. In future devices, the built-in piezoelectricity of AlN can be utilized for direct coupling to qubits or in-situ tuning of mechanical mode frequencies, defect mode couplings, or acoustic bandgaps, which can be used as building blocks of tunable phononic circuits or low-noise sensors.

physics.app-ph↗

arXiv2025

Superconducting flip-chip devices using indium microspheres on Au-passivated Nb or NbN as under-bump metallization layer

Superconducting flip-chip interconnects are crucial for the three-dimensional integration of superconducting circuits in sensing and quantum technology applications. We demonstrate a simplified approach for a superconducting flip-chip device using commercially available indium microspheres and an in-house-built transfer stage for bonding two chips patterned with superconducting thin films. We use a gold-passivated niobium or niobium nitride layer as an under-bump metallization (UBM) layer between an aluminum-based superconducting wiring layer and the indium interconnect. At millikelvin temperatures, our flip-chip assembly can transport a supercurrent with tens of milliamperes, limited by the smallest geometric feature size and critical current density of the UBM layer and not by the indium interconnect. We show that the pressed indium interconnect itself can carry a supercurrent exceeding 1A due to its large size of about 500 micrometer diameter. Our flip-chip assembly does not require electroplating nor patterning of indium. The assembly process does not need a flip-chip bonder and can be realized with a transfer stage using a top chip with transparency or through-vias for alignment. These flip-chip devices can be utilized in applications that require few superconducting interconnects carrying large currents at millikelvin temperatures.

cond-mat.supr-con↗

arXiv2025

Thickness dependence of the mechanical properties of piezoelectric high-$Q_m$ nanomechanical resonators made from aluminium nitride

Nanomechanical resonators with high quality factors (\Qm{}) enable mechanics-based quantum technologies, in particular quantum sensing and quantum transduction. High-\Qm{} nanomechanical resonators in the kHz to MHz frequency range can be realized in tensile-strained thin films that allow the use of dissipation dilution techniques to drastically increase \Qm{}. In our work, we study the material properties of tensile-strained piezoelectric films made from aluminium nitride (AlN). We characterize crystalline AlN films with a thickness ranging from \SI{45}{\nano\meter} to \SI{295}{\nano\meter}, which are directly grown on Si(111) by metal-organic vapour-phase epitaxy. We report on the crystal quality and surface roughness, the piezoelectric response, and the residual and released stress of the AlN thin films. Importantly, we determine the intrinsic quality factor of the films at room temperature in high vacuum. We fabricate and characterize AlN nanomechanical resonators that exploit dissipation dilution to enhance the intrinsic quality factor by utilizing the tensile strain in the film. We find that AlN nanomechanical resonators below \SI{200}{\nano\meter} thickness exhibit the highest \Qf{}-product, on the order of $10^{12}$\,Hz. We discuss possible strategies to optimize the material growth that should lead to devices that reach even higher \Qf{}-products. This will pave the way for future advancements of optoelectromechanical quantum devices made from tensile-strained piezoelectric AlN.

cond-mat.mes-hall↗

arXiv2025

Coherent feedback control for cavity optomechanical systems with a frequency-dependent mirror

Ground-state cooling of mechanical resonators is a prerequisite for the observation of various quantum effects in optomechanical systems and thus has always been a crucial task in quantum optomechanics. In this paper, we study how to realize ground-state cooling of the mechanical mode in a Fano-mirror optomechanical setup, which allows for enhanced effective optomechanical interaction but typically works in the (deeply) unresolved-sideband regime. We reveal that for such a two-sided cavity geometry with very different decay rates at the two cavity mirrors, it is possible to cool the mechanical mode down to its ground state within a broad range of parameters by using an appropriate single-sided coherent feedback. This is possible even if the total optical loss is more than seven orders of magnitude larger than the mechanical frequency and the feedback efficiency is relatively low. Importantly, we show that a more standard double-sided feedback scheme is not appropriate to cooperate with a Fano-mirror system.

quant-ph↗

arXiv2024

Ultrathin 3R-MoS$_2$ metasurfaces with atomically precise edges for efficient nonlinear nanophotonics

Dielectric metasurfaces that combine high-index materials with optical nonlinearities are widely recognized for their potential in various quantum and classical nanophotonic applications. However, the fabrication of high-quality metasurfaces poses significant material-dependent challenges, as their designs are often susceptible to disorder, defects, and scattering losses, which are particularly prone to occur at the edges of nanostructured features. Additionally, the choice of the material platforms featuring second-order optical nonlinearities, $χ^{(2)}$, is limited to broken-inversion symmetry crystals such as GaAs, GaP, LiNbO$_3$, and various bulk van der Waals materials, including GaSe and NbOCl$_2$. Here, we use a combination of top-down lithography and anisotropic wet etching of a specially stacked van der Waals crystal -- 3R-MoS$_2$, which exhibits both a high refractive index and exceptional $χ^{(2)}$ nonlinearity, to produce metasurfaces consisting of perfect equilateral triangle nanoholes with atomically precise zigzag edges. Due to the geometry of the triangle, the etching process is accompanied by a transition from an in-plane $C_4$ symmetric structure to a broken-in-plane symmetry configuration, thereby allowing for the realization of the quasi-bound-state-in-the-continuum (q-BIC) concept. The resulting ultrathin metasurface ($\sim$ 20-25 nm) demonstrates a remarkable enhancement in second-harmonic generation (SHG) -- over three orders of magnitude at specific wavelengths and linear polarization directions compared to a host flake.

physics.optics↗

arXiv2024

Nanomechanical crystalline AlN resonators with high quality factors for quantum optoelectromechanics

High-\Qm{} mechanical resonators are crucial for applications where low noise and long coherence time are required, as mirror suspensions, quantum cavity optomechanical devices, or nanomechanical sensors. Tensile strain in the material enables the use of dissipation dilution and strain engineering techniques, which increase the mechanical quality factor. These techniques have been employed for high-\Qm{} mechanical resonators made from amorphous materials and, recently, from crystalline materials such as InGaP, SiC, and Si. A strained crystalline film exhibiting substantial piezoelectricity expands the capability of high-\Qm{} nanomechanical resonators to directly utilize electronic degrees of freedom. In this work we realize nanomechanical resonators with \Qm{} up to $2.9\times 10^{7}$ made from tensile-strained \SI{290}{\nano\meter}-thick AlN, which is an epitaxially-grown crystalline material offering strong piezoelectricity. We demonstrate nanomechanical resonators that exploit dissipation dilution and strain engineering to reach a \Qf-product approaching $10^{13}$\,\SI{}{\hertz} at room temperature. We realize a novel resonator geometry, triangline, whose shape follows the Al-N bonds and offers a central pad that we pattern with a photonic crystal. This allows us to reach an optical reflectivity above 80\% for efficient coupling to out-of-plane light. The presented results pave the way for quantum optoelectromechanical devices at room temperature based on tensile-strained AlN.

cond-mat.mes-hall↗

arXiv2024

Modelling magnetically-levitated superconducting ellipsoids, cylinders and cuboids for quantum magnetomechanics

We theoretically investigate the properties of magnetically-levitated superconducting rotors confined in anti-Helmholtz traps, for application in magnetomechanical experiments. We study both the translational modes and a librational mode. The librational mode gives an additional degree of freedom that levitated spheres do not have access to. We compare rotors of different shapes: ellipsoids, cylinders and cuboids. We find that the stable orientations of the rotors depend on the rotors' aspect ratios.

physics.app-ph↗

arXiv2024

Dissipative and dispersive cavity optomechanics with a frequency-dependent mirror

An optomechanical microcavity can considerably enhance the interaction between light and mechanical motion by confining light to a sub-wavelength volume. However, this comes at the cost of an increased optical loss rate. Therefore, microcavity-based optomechanical systems are placed in the unresolved-sideband regime, preventing sideband-based ground-state cooling. A pathway to reduce optical loss in such systems is to engineer the cavity mirrors, i.e., the optical modes that interact with the mechanical resonator. In our work, we analyze such an optomechanical system, whereby one of the mirrors is strongly frequency-dependent, i.e., a suspended Fano mirror. This optomechanical system consists of two optical modes that couple to the motion of the suspended Fano mirror. We formulate a quantum-coupled-mode description that includes both the standard dispersive optomechanical coupling as well as dissipative coupling. We solve the Langevin equations of the system dynamics in the linear regime showing that ground-state cooling from room temperature can be achieved even if the cavity is per se not in the resolved-sideband regime, but achieves effective sideband resolution through strong optical mode coupling. Importantly, we find that the cavity output spectrum needs to be properly analyzed with respect to the effective laser detuning to infer the phonon occupation of the mechanical resonator. Our work also predicts how to reach the regime of nonlinear quantum optomechanics in a Fano-based microcavity by engineering the properties of the Fano mirror.

physics.optics↗

arXiv2023

Quasibound states in the continuum in photonic-crystal-based optomechanical microcavities

We present a detailed study of mechanically compliant, photonic-crystal-based microcavities featuring a quasi-bound state in the continuum. Such systems have recently been predicted to reduce the optical loss in Fabry-Perot-type optomechanical cavities. However, they require two identical photonic-crystal slabs facing each other, which poses a considerable challenge for experimental implementation. We investigate how such an ideal system can be simplified and still exhibit a quasi-bound state in the continuum. We find that a suspended photonic-crystal slab facing a distributed Bragg reflector realizes an optomechanical system with a quasi-bound state in the continuum. In this system, the radiative cavity loss can be eliminated to the extent that the cavity loss is dominated by dissipative loss originating from material absorption only. These proposed optomechanical cavity designs are predicted to feature optical quality factors in excess of 10^5.

physics.optics↗

arXiv2023

High-Q magnetic levitation and control of superconducting microspheres at millikelvin temperatures

We report the levitation of a superconducting lead-tin sphere with 100 micrometer diameter (corresponding to a mass of 5.6 micrograms) in a static magnetic trap formed by two coils in an anti-Helmholtz configuration, with adjustable resonance frequencies up to 240 hertz. The center-of-mass motion of the sphere is monitored magnetically using a dc superconducting quantum interference device as well as optically and exhibits quality factors of up to 2.6e7. We also demonstrate 3D magnetic feedback control of the sphere's motion. The setup is housed in a dilution refrigerator operating at 15 millikelvin. By implementing a cryogenic vibration isolation system we can attenuate environmental vibrations at 200 hertz by approximately seven orders of magnitude. The combination of low temperature, large mass and high quality factor as well as adjustable resonance frequencies provides a promising platform for testing quantum physics in previously unexplored regimes with high mass and long coherence times.

quant-ph↗