arXiv subjects

Wladimir Sarlin

Publications and source records attributed to Wladimir Sarlin.

8 recordsLinked to original sources

arXiv2026

Morphology of ice structures induced by a freezing rivulet

We investigate the solidification of a water rivulet flowing over a cold inclined substrate and the resulting formation of three-dimensional ice structures. Using a controlled hydraulic and thermal setup, combined with spatiotemporal phase-shifting profilometry and infrared thermography, we characterize both the transient evolution and the final morphology of the ice. We show that a typical experiment proceeds through three stages: formation of a straight ice ridge that stabilizes the rivulet, destabilization and lateral excursions of the flow leading to rapid transverse spreading of the ice structure, and progressive thickening and smoothing of the ice block. Across a wide range of flow rates, inclinations and thermal conditions, the final morphology comprises an upstream triangular lateral envelope, followed by a downstream region of nearly constant width once the substrate edges are reached. Infrared measurements reveal that the rivulet residence time on the substrate follows a Gaussian distribution in the azimuthal angle, implying that the central region of the structure is visited far more frequently than its lateral edges. Focusing on the domain where the height has converged at the end of the experiments, we develop a two-dimensional theoretical model that couples a hydrodynamic model for the rivulet geometry with heat transport in both liquid and solid phases. In the large Péclet number limit, the model predicts an exponential increase of the stationary ice height along the flow direction and it shows an excellent agreement with the experimental height field. We further show how the combination of the stationary height profile and the non-uniform residence time distribution controls the angular convergence of the ice cross-sections.

physics.flu-dyn↗

arXiv2025

Free surface topography of capillary flows using spatiotemporal phase shifting profilometry

We present a novel experimental technique to characterize the free surface of capillary flows adapted from the Spatio-Temporal Phase Shifting Profilometry (ST-PSP) method introduced by Ri et al. (Journal of Optics, 2019) for solid bodies. The present study is focused on various regimes of capillary flows over inclined surfaces, including drops, rivulets, meanders, and braided films. A calibration process is carried out using a solid wedge to determine the optical distances required for the phase-to-height relationship. The optimal dye concentration necessary for accurately reconstructing the free surface of a dyed water flow is explored. The ST-PSP method is then applied to profile different liquid flows and objects, achieving large signal-to-noise ratios across all experiments. Notably, the analysis of a sessile droplet shows a promising correlation between the ST-PSP results and side-view visualizations, as evidenced by the accurate recovery of its apparent contact angle. Furthermore, free surface reconstructions of rivulet flows exhibit good agreement with the theoretical predictions of Duffy and Moffatt (The Chemical Engineering Journal and the Biochemical Engineering Journal, 1995). These results suggest that the ST-PSP method is highly effective for obtaining accurate height maps of capillary flows and objects, making it a valuable tool for validating theoretical models in the future.

physics.flu-dyn↗

arXiv2024

Nascent water waves induced by the impulsive motion of a solid wall

In the present study, we investigated the generation phase of laboratory-scale water waves induced by the impulsive motion of a rigid piston, whose maximum velocity $U$ and total stroke $L$ are independently varied, as well as the initial liquid depth $h$. By doing so, the influence of two dimensionless numbers is studied: the Froude number $\mathrm{Fr}_p=U/(gh)^{1/2}$, with $g$ the gravitational acceleration, and the relative stroke $Λ_p =L/h$ of the piston. During the constant acceleration phase of the vertical wall, a transient water bump forms and remains localised in the vicinity of the piston, for all investigated parameters. Experiments with a small relative acceleration $γ/g$, where $γ=U^2/L$, are well captured by a first-order potential flow theory established by \citet{1990_joo}, which provides a fair estimate of the overall free surface elevation and the maximum wave amplitude reached at the contact with the piston. For large Froude numbers, an unsteady hydraulic jump theory is proposed, which accurately predicts the time evolution of the wave amplitude at the contact with the piston throughout the generation phase. At the end of the formation process, the dimensionless volume of the bump evolves linearly with $Λ_p$ and the wave aspect ratio is found to be governed by the relative acceleration $γ/g$. As the piston begins its constant deceleration, the water bump evolves into a propagating wave and several regimes are then reported and mapped in a phase diagram in the ($\mathrm{Fr}_p$, $Λ_p$) plane. While the transition from waves to water jets is observed if the typical acceleration of the piston is close enough to the gravitational acceleration $g$, the wave regimes are found to be mainly selected by the relative piston stroke $Λ_p$ while the Froude number determines whether the generated wave breaks or not.

physics.flu-dyn↗

arXiv2024

Role of melting and solidification in the spreading of an impacting water drop

The present study reports experiments of water droplet impacting on ice or on a cold metallic substrate, with the aim of understanding the effect of phase change on the impingement process. Both liquid and substrate temperatures are varied, as well as the height of fall. The dimensionless maximum spreading diameter, $β_m$, is found to increase with both temperatures as well as with the impact velocity. Furthermore, $β_m$ is reduced when solidification, which enhances dissipation, is present, whereas fusion favours the liquid film spreading. These observations are rationalized by extending an existing model of effective viscosity, in which phase change alters the size and shape of the developing viscous boundary layer, thereby modifying the value of $β_m$. The use of this correction allows to adapt a scaling law existing for isothermal drop impacts to propose a universal law giving the maximum diameter of an impacting water droplet in the presence of melting or solidification.

physics.flu-dyn↗

arXiv2024

The effects of interparticle cohesion on the collapse of granular columns

The presence of interparticle cohesion can drastically change the behavior of granular materials. For instance, powders are challenging to handle, and one can make a sandcastle using wet grains. In this study, we report experimental results for columns of model cohesive grains collapsing under their own weight in air and spreading on a rough horizontal surface. The effects of two different sources of interparticle cohesion on two collapse geometries are compared and rationalized in a common framework. Grains are made cohesive by adding a small amount of water, such that they are in the pendular state, or by applying a polymer coating. The effects of cohesion are reported for a cylindrical column that spreads unconfined axisymmetrically and a confined rectangular column that flows in a single direction. A dimensionless number, comparing macroscopic cohesive strength to particle weight, is shown to capture the effects of cohesion on the final morphology. To this end, a characterization of the cohesive strength of the granular materials is obtained, independent of the physical source of cohesion at the particle scale. Such a framework allows for a common description of cohesive granular materials with different sources of cohesion.

cond-mat.soft↗

arXiv2022

From granular collapses to shallow water waves: A predictive model for tsunami generation

In this article, we present a predictive model for the amplitude of impulse waves generated by the collapse of a granular column into a water layer. The model, which combines the spreading dynamics of the grains and the wave hydrodynamics in shallow water, is successfully compared to a large dataset of laboratory experiments, and captures the influence of the initial parameters while giving an accurate prediction. Furthermore, the role played on the wave generation by two key dimensionless numbers, i.e., the global Froude number and the relative volume of the immersed deposit, is rationalized. These results provide a simplified, yet comprehensive, physical description of the generation of tsunami waves engendered by large-scale subaerial landslides, rockfalls, or cliff collapses in a shallow water.

physics.flu-dyn↗

arXiv2021

Collapse dynamics of dry granular columns: from free-fall to quasi-static flow

Gravity-driven collapses involving large amounts of dense granular material, such as landslides, avalanches, or rockfalls, in a geophysical context, represent significant natural hazards. Understanding their complex dynamics is hence a key concern for risk assessment. In the present work, we report experiments on the collapse of quasi-two-dimensional dry granular columns under the effect of gravity, where both the velocity at which the grains are released and the aspect ratio of the column are varied to investigate the dynamics of the falling grains. At high release velocity, classical power laws for the final deposit are recovered, meaning those are representative of a free-fall like regime. For high enough aspect ratios, the top of the column undergoes an overall free-fall like motion. In addition, for all experiments, the falling grains also spread horizontally in a free-fall like motion, and the characteristic time of spreading is related to the horizontal extension reached by the deposit at all altitudes. At low release velocity, a quasi-static state is observed, with scaling laws for the final geometry identical to those of the viscous regime of granular-fluid flow. The velocity at which the grains are released governs the collapse dynamics. Between these two asymptotic regimes, the higher the release velocity, the smaller the impact on the collapse dynamics. The criterion $\overline{V} \geq 0.4\sqrt{gH_0}$, where $H_0$ is the initial height of the column, is found for the mean release velocity $\overline{V}$ not to influence the granular collapse.

cond-mat.soft↗

arXiv2021

Non-linear regimes of tsunami waves generated by a granular collapse

Tsunami waves induced by landslides are a threat to human activities and safety along coastal areas. In this paper, we characterize experimentally the waves generated by the gravity-driven collapse of a dry granular column into water. Three nonlinear wave regimes are identified depending on the Froude number $\mathrm{Fr}_f$ based on the ratio of the velocity of the advancing granular front and the velocity of linear gravity waves in shallow water: transient bores for large $\mathrm{Fr}_f$, solitary waves for intermediate values of $\mathrm{Fr}_f$, and non-linear transition waves at small $\mathrm{Fr}_f$. The wave amplitude relative to the water depth increases with $\mathrm{Fr}_f$ in the three regimes but with different non-linear scalings, and the relative wavelength is an increasing or decreasing function of $\mathrm{Fr}_f$. Two of these wave regimes are rationalized by considering that the advancing granular front acts as a vertical piston pushing the water, while the last one is found to be a transition from shallow to deep water conditions. The present modeling contributes to a better understanding of the rich hydrodynamics of the generated waves, with coastal risk assessment as practical applications.

physics.flu-dyn↗