arXiv subjects

Wojciech Gruszczyński

Publications and source records attributed to Wojciech Gruszczyński.

3 recordsLinked to original sources

arXiv2026

The Impact of Processing Parameters on High-Accuracy Measurements in UAV Photogrammetry

Unmanned aerial vehicle (UAV) photogrammetry is increasingly used in applications requiring high accuracy, such as determining ground surface changes caused by landslides, mining, or microrelief transformation. While acquisition strategies have been widely studied, the influence of the processing workflow-particularly Bundle Block Adjustment parameter settings-remains insufficiently explored. This study addresses this gap through a systematic, full-factorial evaluation of 768 processing variants applied to ten UAV datasets collected over 1.5 years in a 220 ha study area. Eight key parameters were analysed. The results show substantial variability in final 3D accuracy: the best performing variant achieved a root mean square error (RMSE) of 16 mm, whereas the weakest reached 303 mm. The most influential factors were the number of ground control points, the application of additional camera calibration corrections, and the use of the Post-Processing Kinematic GNSS method for determining camera projection center coordinates. The study also evaluates how workflow optimization affects the accuracy of displacement, tilt changes, and horizontal strain determination. While random displacement errors remained stable (RMSE of ~6-7 mm), systematic errors were significantly reduced by over half in all axes, with vertical median absolute error decreasing from 14 mm to 7 mm in the optimized configuration compared to the baseline previously used by the authors. This study provides the first large-scale, practice-oriented assessment of how processing parameter selection shapes the accuracy of both photogrammetric products and deformation indices determination. The results offer actionable guidance for developing more robust and repeatable UAV photogrammetry workflows tailored to high-precision monitoring.

cs.CV↗

arXiv2026

Recognition of Urbanized Areas in UAV-Derived Very-High-Resolution Visible-Light Imagery

This study compared classifiers that differentiate between urbanized and non-urbanized areas based on unmanned aerial vehicle (UAV)-acquired RGB imagery. The tested solutions in-cluded numerous vegetation indices (VIs) thresholding and neural networks (NNs). The analysis was conducted for two study areas for which surveys were carried out using different UAVs and cameras. The ground sampling distances for the study areas were 10 mm and 15 mm, respectively. Reference classification was performed manually, obtaining approximately 24 million classified pix-els for the first area and approximately 3.8 million for the second. This research study included an analysis of the impact of the season on the threshold values for the tested VIs and the impact of image patch size provided as inputs for the NNs on classification accuracy. The results of the con-ducted research study indicate a higher classification accuracy using NNs (about 96%) compared with the best of the tested VIs, i.e., Excess Blue (about 87%). Due to the highly imbalanced nature of the used datasets (non-urbanized areas constitute approximately 87% of the total datasets), the Mat-thews correlation coefficient was also used to assess the correctness of the classification. The analysis based on statistical measures was supplemented with a qualitative assessment of the classification results, which allowed the identification of the most important sources of differences in classification between VIs thresholding and NNs.

cs.CV↗

arXiv2026

Determining Vertical Displacement of Agricultural Areas Using UAV-Photogrammetry and a Heteroscedastic Deep Learning Model

This article introduces an algorithm that uses a U-Net architecture to determine vertical ground surface displacements from unmanned aerial vehicle (UAV)-photogrammetry point clouds, offering an alternative to traditional ground filtering methods. Unlike con-ventional ground filters that rely on point cloud classification, the proposed approach em-ploys heteroscedastic regression. The U-Net model predicts the conditional expected val-ues of the elevation corrections, aiming to reduce the impact of vegetation on determined ground surface elevations. Concurrently, it estimates the logarithm of the elevation cor-rection variance, allowing for direct quantification of the uncertainty associated with each elevation correction value. The algorithm was evaluated using three metrics: the root mean square error (RMSE) of vertical displacements, the percentage of nodes with deter-mined displacement values, and the percentage of outliers among those values. Perfor-mance was assessed using the technique for order of preference by similarity to ideal so-lution (TOPSIS) method and compared against several ground-filter-based algorithms across four datasets, each including at least two time intervals. In most cases, the U-Net-based approach demonstrated a slight performance advantage over traditional ground filtering techniques. For example, for the U-Net-based algorithm, for one of the test da-tasets, the RMSE of the determined subsidences was 6.1 cm, the percentage of nodes with determined subsidences was 80.5%, and the percentage of outliers was 0.2%. For the same case, the algorithm based on the next best model (SMRF) allowed an RMSE of 7.7 cm to be obtained; for 77.3% of nodes, the subsidences were determined; and the percentage of outliers was 0.3%.

cs.CV↗