arXiv subjects

Wojciech M. Zabolotny

Publications and source records attributed to Wojciech M. Zabolotny.

3 recordsLinked to original sources

arXiv2015

Automatic latency balancing in VHDL-implemented complex pipelined systems

Balancing (equalization) of latency in parallel paths in the pipelined data processing system is an important problem. Without that the data from different paths arrive at the processing blocks in different clock cycles, and incorrect results are produced. Manual correction of latencies is a tedious and error-prone work. This paper presents an automatic method of latency equalization in systems described in VHDL. The method is based on simulation and is portable between different simulation and synthesis tools. The method does not increase the complexity of the synthesized design comparing to the solution based on manual latency adjustment. The example implementation of the proposed methodology together with a simple design demonstrating its use is available as an open source project under BSD license.

cs.AR↗

arXiv2015

Low latency protocol for transmission of measurement data from FPGA to Linux computer via 10 Gbps Ethernet link

This paper presents FADE-10G - an integrated solution for modern multichannel measurement systems. Its main aim is a low latency, reliable transmission of measurement data from FPGA-based front-end electronic boards (FEBs) to a computer-based node in the Data Acquisition System (DAQ), using a standard Ethernet 1 Gbps or 10 Gbps link. In addition to transmission of data, the system allows the user to send reliably simple control commands from DAQ to FEB and to receive responses. The aim of the work is to provide a possible simple base solution, which can be adapted by the end user to his or her particular needs. Therefore, the emphasis is put on the minimal consumption of FPGA resources in FEB and the minimal CPU load in the DAQ computer. The open source implementation of the FPGA IP core and the Linux kernel driver published under permissive license facilitates modifications and reuse of the solution. The system has been successfully tested in real hardware, both with 1 Gbps and 10 Gbps links.

cs.NI↗

arXiv2012

Efficient transmission of measurement data from FPGA to embedded system via Ethernet link

This paper presents a system consisting of the FPGA IP core, the simple network protocol and the Linux device driver, capable of efficient and reliable data transmission from a low resources FPGA chip to the Linux-based embedded computer system, via a private Ethernet network (consisting of a single segment or a few segments connected via an Ethernet switch). The embedded system may optionally process the acquired data, and distribute them further, using standard network protocols. Proposed design targets cost-efficient multichannel data acquisition systems, in which multiple FPGA based front end boards (FEB) should transmit the stream of acquired data to the computer network, responsible for their final processing and archiving. The presented solution allows to minimize the cost of data concentration due to use of inexpensive Ethernet network infrastructure. The work is mainly focused on minimization of resources consumption in the FPGA, and minimization of acknowledge latency in the Linux based system - which allows to achieve high throughput in spite of use of inexpensive FPGA chips with small internal memory.

cs.NI↗