arXiv subjects

Wolfgang Pfaff

Publications and source records attributed to Wolfgang Pfaff.

At least 19 recordsLinked to original sources

arXiv2026

Parametrically induced strong coupling between a superconducting quantum circuit and a solid-state spin ensemble

Efficient quantum state transfer between superconducting circuits and solid-state spins would unlock high-coherence quantum memories for superconducting quantum processors. We demonstrate dynamically controlled strong coupling between a Josephson circuit and a rare-earth spin ensemble. Using a parametric pump, we realize on-demand coupling of several MHz, which will enable faithful state transfer between quantum circuits and spins. Our architecture enables quantum control of spin ensembles, and paves the way for hybrid memories with coherence far beyond those of superconducting circuits alone.

quant-ph↗

arXiv2026

Autonomous stabilization of remote entanglement in a cascaded quantum network

Remote entanglement between widely separated qubits is a fundamental quantum phenomenon and a critical resource for quantum information applications. Generating entanglement between independent qubits separated by arbitrary, potentially large distances requires propagating quantum states, and is typically achieved using pulsed protocols combining distinct steps of local entanglement generation followed by distribution. This necessity raises an intriguing question: Can remote entanglement be stabilized indefinitely, instead of only periodically regenerated and redistributed after decay? Here, we demonstrate that this is indeed possible, reporting autonomous stabilization of entanglement between two separate superconducting-qubit devices. Combining nonreciprocal waveguide coupling and local driving, we experimentally realize a symmetry-based coherent quantum-absorber scheme in a cascaded network. We quantify the degree of entanglement through quantum state tomography, finding that the protocol's entangling power is severely limited by imperfections that break the required symmetry. We show, however, that a modified protocol based on an alternate symmetry is far more robust, enabling us to achieve a concurrence approaching 0.5, a limit set only by local loss in the network. Our results enable on-demand delivery of high-fidelity entanglement in modular quantum processors and networks and pave the way for autonomously protecting distributed quantum information.

quant-ph↗

arXiv2026

Structural control of two-level defect density revealed by high-throughput correlative measurements of Josephson junctions

Materials defects in Josephson junctions (JJs), often referred to as two-level systems (TLS), couple to superconducting qubits and are a critical bottleneck for scalable quantum processors. Despite their importance, understanding the microscopic sources of TLS and how to mitigate them has remained a major challenge. Here, we demonstrate a high-throughput, correlated approach to trace the microstructural origins of strongly-coupled TLS in Josephson circuits. We assembled a massive dataset of TLS across 6,000 Al/AlOx/Al JJs and more than 600 atomic resolution transmission electron microscopy images. We statistically link fabrication, microstructure, and TLS occurrence, revealing a strong correlation between Al electrode thickness, Al grain size, and TLS density. Correspondingly, we find a two-thirds reduction in TLS prompted by a change in electrode fabrication parameters. These results demonstrate a robust, data-driven methodology to understand and control defects in quantum circuits and pave the way for significantly reducing TLS density.

quant-ph↗

arXiv2025

Fluxonium as a control qubit for bosonic quantum information

Bosonic codes in superconducting resonators are a hardware-efficient avenue for quantum error correction and benefit from favorable error hierarchies provided by long-lived cavities compared to typical superconducting qubits. The required coupling to an ancillary control qubit, however, can negate these benefits by inducing highly detrimental effects such as excess decoherence and undesired nonlinearities. An important question is thus whether a cavity-qubit coupling can be realized that offers readout and control capabilities without spoiling the cavity. Here, motivated by its long lifetime and design flexibility of its Hamiltonian, we experimentally investigate the fluxonium as a control qubit for superconducting cavities. We couple a fluxonium qubit to a superconducting resonator in the strong-dispersive regime and use it to measure the coherence and inherited nonlinearities of the resonator. We then demonstrate universal control by preparing and characterizing resonator Fock states and their superpositions, with fidelities limited by resonator decay in our planar prototype device. Finally, we use the predictability of the resonator's inherited nonlinearities to show numerically that the fluxonium can reach cavity-coupling regimes that eliminate undesirable cavity nonlinearities. These results demonstrate the potential of the fluxonium as a high-performance bosonic control qubit for superconducting cavities.

quant-ph↗

arXiv2024

High dynamic-range quantum sensing of magnons and their dynamics using a superconducting qubit

Magnons can endow quantum devices with new functionalities. Assessing their potential requires precise characterization of magnon properties. Here, we use a superconducting qubit to probe magnons in a ferrimagnet over a range of about 2000 excitations. Using qubit control and parametrically induced qubit-magnon interactions we demonstrate few-excitation sensitive detection of magnons and are able to accurately resolve their decay. These results introduce quantum circuits as high-dynamic range probes for magnons and provide an avenue toward sensitive detection of nontrivial magnon dynamics.

quant-ph↗

arXiv2024

Parametrically-controlled microwave-photonic interface for the fluxonium

Converting quantum information from stationary qubits to traveling photons enables both fast qubit initialization and efficient generation of flying qubits for redistribution of quantum information. This conversion can be performed using cavity-sideband transitions. In the fluxonium, however, direct cavity-sideband transitions are forbidden due to parity symmetry. Here we circumvent this parity selection rule by using a three-wave mixing element to couple the fluxonium to a resonator. We experimentally demonstrate a scheme for interfacing the fluxonium with traveling photons through microwave-induced parametric conversion. We perform fast reset on the fluxonium qubit, initializing it with >95% ground-state population. We then implement controlled release and temporal shaping of a flying photon, useful for quantum state transfer and remote entanglement. The simplicity and flexibility of our demonstrated scheme enables fluxonium-based remote entanglement architectures.

quant-ph↗

arXiv2024

Parametrically controlled chiral interface for superconducting quantum devices

Nonreciprocal microwave routing plays a crucial role for measuring quantum circuits, and allows for realizing cascaded quantum systems for generating and stabilizing entanglement between non-interacting qubits. The most commonly used tools for implementing directionality are ferrite-based circulators. These devices are versatile, but suffer from excess loss, a large footprint, and fixed directionality. For utilizing nonreciprocity in scalable quantum circuits it is desirable to develop efficient integration of low-loss and in-situ controllable directional elements. Here, we report the design and experimental realization of a minimal controllable directional interface that can be directly coupled to superconducting qubits. In the presented device, nonreciprocity is realized through a combination of interference and phase-controlled parametric pumping. We have achieved a maximum directionality of around 30\,dB, and the performance of the device is predicted quantitatively from independent calibration measurements. Using the excellent agreement of model and experiment, we predict that the circuit will be useable as a chiral qubit interface with inefficiencies at the one-percent level or below. Our work offers a promising route for realizing high-fidelity signal routing and entanglement generation in all-to-all connected microwave quantum networks, and provides a path for isolator-free qubit readout schemes.

quant-ph↗

arXiv2024

A high-efficiency plug-and-play superconducting qubit network

Modular architectures are a promising approach to scale quantum devices to the point of fault tolerance and utility. Modularity is particularly appealing for superconducting qubits, as monolithically manufactured devices are limited in both system size and quality. Constructing complex quantum systems as networks of interchangeable modules can overcome this challenge through `Lego-like' assembly, reconfiguration, and expansion, in a spirit similar to modern classical computers. First prototypical superconducting quantum device networks have been demonstrated. Interfaces that simultaneously permit interchangeability and high-fidelity operations remain a crucial challenge, however. Here, we demonstrate a high-efficiency interconnect based on a detachable cable between superconducting qubit devices. We overcome the inevitable loss in a detachable connection through a fast pump scheme, enabling inter-module SWAP efficiencies at the 99%-level in less than 100 ns. We use this scheme to generate high-fidelity entanglement and operate a distributed logical dual-rail qubit. At the observed ~1% error rate, operations through the interconnect are at the threshold for fault-tolerance. These results introduce a modular architecture for scaling quantum processors with reconfigurable and expandable networks.

quant-ph↗

arXiv2024

Exact Results for a Boundary-Driven Double Spin Chain and Resource-Efficient Remote Entanglement Stabilization

We derive an exact solution for the steady state of a setup where two $XX$-coupled $N$-qubit spin chains (with possibly non-uniform couplings) are subject to boundary Rabi drives, and common boundary loss generated by a waveguide (either bidirectional or unidirectional). For a wide range of parameters, this system has a pure entangled steady state, providing a means for stabilizing remote multi-qubit entanglement without the use of squeezed light. Our solution also provides insights into a single boundary-driven dissipative $XX$ spin chain that maps to an interacting fermionic model. The non-equilibrium steady state exhibits surprising correlation effects, including an emergent pairing of hole excitations that arises from dynamically constrained hopping. Our system could be implemented in a number of experimental platforms, including circuit QED.

quant-ph↗

arXiv2024

Loss resilience of driven-dissipative remote entanglement in chiral waveguide quantum electrodynamics

Establishing limits of entanglement in open quantum systems is a problem of fundamental interest, with strong implications for applications in quantum information science. Here, we study limits of entanglement stabilization between remote qubits. We theoretically investigate the loss resilience of driven-dissipative entanglement between remote qubits coupled to a chiral waveguide. We find that by coupling a pair of storage qubits to the two driven qubits, the steady state can be tailored such that the storage qubits show a degree of entanglement that is higher than what can be achieved with only two driven qubits coupled to the waveguide. By reducing the degree of entanglement of the driven qubits, we show that the entanglement between the storage qubits becomes more resilient to waveguide loss. Our analytical and numerical results offer insights into how waveguide loss limits the degree of entanglement in this driven-dissipative system, and offers important guidance for remote entanglement stabilization in the laboratory, for example using superconducting circuits.

quant-ph↗

arXiv2023

Controllable Single Cooper Pair Splitting in Hybrid Quantum Dot Systems

Cooper pair splitters hold utility as a platform for investigating the entanglement of electrons in Cooper pairs, but probing splitters with voltage-biased Ohmic contacts prevents the retention of electrons from split pairs since they can escape to the drain reservoirs. We report the ability to controllably split and retain single Cooper pairs in a multi-quantum-dot device isolated from lead reservoirs, and separately demonstrate a technique for detecting the electrons emerging from a split pair. First, we identify a coherent Cooper pair splitting charge transition using dispersive gate sensing at GHz frequencies. Second, we utilize a double quantum dot as an electron parity sensor to detect parity changes resulting from electrons emerging from a superconducting island.

cond-mat.mes-hall↗

arXiv2023

Realizing all-to-all couplings among detachable quantum modules using a microwave quantum state router

One of the primary challenges in realizing large-scale quantum processors is the realization of qubit couplings that balance interaction strength, connectivity, and mode confinement. Moreover, it is very desirable for the device elements to be detachable, allowing components to be built, tested, and replaced independently. In this work, we present a microwave quantum state router, centered on parametrically driven, Josephson-junction based three-wave mixing, that realizes all-to-all couplings among four detachable quantum modules. We demonstrate coherent exchange among all four communication modes, with an average full-iSWAP time of 764ns and average inferred inter-module exchange fidelity of 0.969, limited by mode coherence. We also demonstrate photon transfer and pairwise entanglement between module qubits, and parallel operation of simultaneous iSWAP exchange across the router. Our router-module architecture serves as a prototype of modular quantum computer that has great potential for enabling flexible, demountable, large-scale quantum networks of superconducting qubits and cavities.

quant-ph↗

arXiv2023

Integrating Magnons for Quantum Information

Magnons, the quanta of collective spin excitations in magnetically ordered materials, have distinct properties that make them uniquely appealing for quantum information applications. They can have ultra-small wavelengths down to the nanometer scale even at microwave frequencies. They can provide coupling to a diverse set of other quantum excitations, and their inherently gyrotropic dynamics forms the basis for pronounced non-reciprocities. In this article we discuss what the current research challenges are for integrating magnetic materials into quantum information systems and provide a perspective on how to address them.

cond-mat.mtrl-sci↗

arXiv2022

Variable and orbital-dependent spin-orbit field orientations in a InSb double quantum dot characterized via dispersive gate sensing

Utilizing dispersive gate sensing (DGS), we investigate the spin-orbit field ($\textbf{B}_{SO}$) orientation in a many-electron double quantum dot (DQD) defined in an InSb nanowire. While characterizing the inter-dot tunnel couplings, the measured dispersive signal depends on the electron charge occupancy, as well as on the amplitude and orientation of the external magnetic field. The dispersive signal is mostly insensitive to the external field orientation when a DQD is occupied by a total odd number of electrons. For a DQD occupied by a total even number of electrons, the dispersive signal is reduced when the finite external magnetic field aligns with the effective $\textbf{B}_{SO}$ orientation. This fact enables the identification of $\textbf{B}_{SO}$ orientations for different DQD electron occupancies. The $\textbf{B}_{SO}$ orientation varies drastically between charge transitions, and is generally neither perpendicular to the nanowire nor in the chip plane. Moreover, $\textbf{B}_{SO}$ is similar for pairs of transitions involving the same valence orbital, and varies between such pairs. Our work demonstrates the practicality of DGS in characterizing spin-orbit interactions in quantum dot systems, without requiring any current flow through the device.

cond-mat.mes-hall↗

arXiv2021

Rapid microwave-only characterization and readout of quantum dots using multiplexed gigahertz-frequency resonators

Superconducting resonators enable fast characterization and readout of mesoscopic quantum devices. Finding ways to perform measurements of interest on such devices using resonators only is therefore of great practical relevance. We report the experimental investigation of an InAs nanowire multi-quantum dot device by probing GHz resonators connected to the device. First, we demonstrate accurate extraction of the DC conductance from measurements of the high-frequency admittance. Because our technique does not rely on DC calibration, it could potentially obviate the need for DC measurements in semiconductor qubit devices. Second, we demonstrate multiplexed gate sensing and the detection of charge tunneling on microsecond time scales. The GHz detection of dispersive resonator shifts allows rapid acquisition of charge-stability diagrams, as well as resolving charge tunneling in the device with a signal-to-noise ratio of up to 15 in one microsecond. Our measurements show that GHz-frequency resonators may serve as a universal tool for fast tune-up and high-fidelity readout of semiconductor qubits.

cond-mat.mes-hall↗

arXiv2020

A gate-tunable, field-compatible fluxonium

Circuit quantum electrodynamics, where photons are coherently coupled to artificial atoms built with superconducting circuits, has enabled the investigation and control of macroscopic quantum-mechanical phenomena in superconductors. Recently, hybrid circuits incorporating semiconducting nanowires and other electrostatically-gateable elements have provided new insights into mesoscopic superconductivity. Extending the capabilities of hybrid flux-based circuits to work in magnetic fields would be especially useful both as a probe of spin-polarized Andreev bound states and as a possible platform for topological qubits. The fluxonium is particularly suitable as a readout circuit for topological qubits due to its unique persistent-current based eigenstates. In this Letter, we present a magnetic-field compatible hybrid fluxonium with an electrostatically-tuned semiconducting nanowire as its non-linear element. We operate the fluxonium in magnetic fields up to 1T and use it to observe the $φ_0$-Josephson effect. This combination of gate-tunability and field-compatibility opens avenues for the exploration and control of spin-polarized phenomena using superconducting circuits and enables the use of the fluxonium as a readout device for topological qubits.

quant-ph↗

arXiv2019

Revealing charge-tunneling processes between a quantum dot and a superconducting island through gate sensing

We report direct detection of charge-tunneling between a quantum dot and a superconducting island through radio-frequency gate sensing. We are able to resolve spin-dependent quasiparticle tunneling as well as two-particle tunneling involving Cooper pairs. The quantum dot can act as an RF-only sensor to characterize the superconductor addition spectrum, enabling us to access subgap states without transport. Our results provide guidance for future dispersive parity measurements of Majorana modes, which can be realized by detecting the parity-dependent tunneling between dots and islands.

cond-mat.mes-hall↗

arXiv2018

Rapid detection of coherent tunneling in an InAs nanowire quantum dot through dispersive gate sensing

Dispersive sensing is a powerful technique that enables scalable and high-fidelity readout of solid-state quantum bits. In particular, gate-based dispersive sensing has been proposed as the readout mechanism for future topological qubits, which can be measured by single electrons tunneling through zero-energy modes. The development of such a readout requires resolving the coherent charge tunneling amplitude from a quantum dot in a Majorana-zero-mode host system faithfully on short time scales. Here, we demonstrate rapid single-shot detection of a coherent single-electron tunneling amplitude between InAs nanowire quantum dots. We have realized a sensitive dispersive detection circuit by connecting a sub-GHz, lumped element microwave resonator to a high-lever arm gate on one of dots. The resulting large dot-resonator coupling leads to an observed dispersive shift that is of the order of the resonator linewidth at charge degeneracy. This shift enables us to differentiate between Coulomb blockade and resonance, corresponding to the scenarios expected for qubit state readout, with a signal to noise ratio exceeding 2 for an integration time of 1 microsecond. Our result paves the way for single shot measurements of fermion parity on microsecond timescales in topological qubits.

cond-mat.mes-hall↗