arXiv subjects

Woo Seok Choi

Publications and source records attributed to Woo Seok Choi.

At least 19 recordsLinked to original sources

arXiv2026

Emergence of unconventional magnetic order in strain-engineered RuO2/TiO2 superlattices

The spin ordering in RuO2 remains a highly debated topic, owing to its elusive nature, with reports ranging from a nonmagnetic ground state to signatures of unconventional magnetic order. Here we provide the first unambiguous, and direct evidence of unconventional magnetism in epitaxial, fully strained RuO2/TiO2 superlattices on TiO2 (110) substrate grown by hybrid molecular beam epitaxy. Polarized neutron reflectometry reveals a finite magnetic moment localized within the compressively strained RuO2 layers, consistent with predictions obtained from first-principles calculations. Complementary density functional theory and X-ray photoemission spectroscopy show that epitaxial strain drives the Ru 4d states toward the Fermi level, triggering a Stoner-type instability that stabilizes non-compensated magnetic order. These unique results reveal that RuO2 exhibits unconventional magnetic states under epitaxial strain, which are not accessible in bulk and establish strain engineering as a powerful route to uncover and control magnetic phases in RuO2 and related oxides.

cond-mat.mtrl-sci↗

arXiv2025

Electrically Tunable Spin Exchange Splitting in Graphene Hybrid Heterostructure

Graphene, with spin and valley degrees of freedom, fosters unexpected physical and chemical properties for the realization of next-generation quantum devices. However, the spin symmetry of graphene is rather robustly protected, hampering manipulation of the spin degrees of freedom for the application of spintronic devices such as electric gate tunable spin filters. We demonstrate that a hybrid heterostructure composed of graphene and LaCoO3 epitaxial thin film exhibits an electrically tunable spin exchange splitting. The large and adjustable spin exchange splitting of 155.9 - 306.5 meV was obtained by the characteristic shifts in both the spin symmetry broken quantum Hall states and the Shubnikov-de-Haas oscillations. Strong hybridization induced charge transfer across the hybrid heterointerface has been identified for the observed spin exchange splitting. The substantial and facile controllability of the spin exchange splitting provides an opportunity for spintronics applications with the electrically-tunable spin polarization in hybrid heterostructures.

cond-mat.str-el↗

arXiv2025

Awakening catalytically active surface of BaRuO3 thin film for alkaline hydrogen evolution

The dynamic reconstruction of surfaces during electrochemical reactions plays a crucial role in determining the performance of electrocatalysts. However, because reconstructions occur at the atomic level, direct observation and elucidation of the underlying mechanism are challenging for conventional powder type catalysts with ill defined lattices. In this study, the catalytically active surface of 3C BaRuO3 (BRO) epitaxial thin films emerges upon the dynamic introduction of surface Ru clusters, for the alkaline hydrogen evolution reaction (HER). Based on the mass activity at overpotential 100 mV, the intrinsic HER performance increases dramatically from 0.11 to 7.72 A/mg immediately after the initial HER cycle and eventually saturates at 1.05 A/mg after continuous operation. The formation of Ru clusters on the catalyst surface, driven by selective Ba leaching under alkaline HER conditions, is observed experimentally. Density functional theory calculations demonstrate that HER activity increased with enhanced H* adsorption owing to the dynamic Ru6 cluster formation. A strategy for stabilizing the 'awakened' active surface of BRO is further proposed by validating that the atomic-scale control of the film thickness can effectively maintain the highly active state. This study offers fundamental insights into the design and stabilization of the highly active Ru-based electrocatalysts for the alkaline HER.

cond-mat.mtrl-sci↗

arXiv2025

Improving 2D-ness to enhance thermopower in oxide superlattices

The transport dynamics of itinerant charge carriers and their interactions with the environment. For two-dimensional oxide thermoelectrics, predominantly represented by doped SrTiO3-based superlattices, reduced spatial dimensions and increased effective mass are known to enhance thermopower (S). However, because of their large effective Bohr radius resulting from their high dielectric constant, SrTiO3-based systems have limitations in exhibiting the 2D characteristic. Here, we focus on EuTiO3 as an alternative perovskite platform in which fractional LaxEu1-xTiO3/EuTiO3 artificial superlattices demonstrate the improvement in 2D nature for the dimensionality-induced improvement of S. We observed a quasi-2D thermopower S2D of -950 uV K-1 and S2D/S3D of ~20 resulting from the improved 2D confinement. Thermopower measurements, combined with hybrid density functional theory calculations, show the enhanced S originates from the confinement of Ti 3dxy-states within the LaxEu1-xTiO3 layers and the associated increase in the 2D density of states. In detail, a smaller effective Bohr radius and modified electronic band structures, in conjunction with the presence of the Eu 4f-states in EuTiO3 which modified the local electronic potential and strengthened the spatial confinement of Ti 3d-states. This approach to improving the dimensional confinement establishes a small effective Bohr radius and Eu 4f-state assisted 2D confinement provides valuable insights into the design of high-performance applications in artificial oxide superlattices.

cond-mat.mtrl-sci↗

arXiv2025

Universal Fabrication of Graphene/Perovskite Oxide Hybrid Heterostructures

Hybrid heterostructures composed of graphene and perovskite oxides provide a promising platform for exploiting synergetic interfacial functionalities. Conventional fabrication methods of the hybrid heterostructures rely on transferring graphene grown on metallic substrates-- a process that is time-consuming, labor-intensive, and prone to introducing numerous defects. In this study, we present a universal, catalyst-free method for the direct growth of graphene on insulating substrates by employing three different perovskite oxide substrates (SrTiO$_3$, LaAlO$_3$, and (La$_{0.18}$Sr$_{0.82}$)(Al$_{0.59}$Ta$_{0.41}$)O$_3$) using atmospheric chemical vapor deposition. Comprehensive characterization via Raman spectroscopy, X-ray spectroscopy, scanning probe microscopy, and electron microscopy confirmed the formation of a uniform, continuous monolayer graphene on all substrates. We identified that growth temperature critically governs graphene quality, as excessive active species may lead to secondary nucleation and the formation of multilayer graphene. Notably, all substrates shared the same optimal growth conditions. Low-temperature Raman spectroscopy and scanning tunneling microscopy of the graphene/SrTiO$_3$ hybrid heterostructure revealed cooperative phenomena, including substrate-induced lattice-phonon and electron-phonon coupling. Our work establishes a reproducible, transfer-free fabrication route for graphene/perovskite oxide hybrid heterostructures and provides empirical support for the universal growth of graphene on insulating substrates.

cond-mat.mtrl-sci↗

arXiv2025

Strain Engineering of van Hove Singularity and Coupled Itinerant Ferromagnetism in Quasi-2D Oxide Superlattices

Engineering van Hove singularities (vHss) near the Fermi level, if feasible, offers a powerful route to control exotic quantum phases in electronic and magnetic behaviors. However, conventional approaches, which rely primarily on chemical and electrical doping, focus mainly on local electrical or optical measurements, limiting their applicability to coupled functionalities. In this study, a vHs-induced insulator-metal transition coupled with a ferromagnetic phase transition was empirically achieved in atomically designed quasi-2D SrRuO3 (SRO) superlattices via epitaxial strain engineering, which has not been observed in conventional 3D SRO systems. Theoretical calculations revealed that epitaxial strain effectively modulates the strength and energy positions of vHs of specific Ru orbitals, driving correlated phase transitions in the electronic and magnetic ground states. X-ray absorption spectroscopy confirmed the anisotropic electronic structure of quasi-2D SRO modulated by epitaxial strain. Magneto-optic Kerr effect and electrical transport measurements demonstrated modulated magnetic and electronic phases. Furthermore, magneto-electrical measurements detected significant anomalous Hall effect signals and ferromagnetic magnetoresistance, indicating the presence of magnetically coupled charge carriers in the 2D metallic regime. This study establishes strain engineering as a promising platform for tuning vHss and resultant itinerant ferromagnetism of low-dimensional correlated quantum systems.

cond-mat.mtrl-sci↗

arXiv2025

Effect of C additives with 0.5% in weight on structural, optical and superconducting properties of Ta-Nb-Hf-Zr-Ti high entropy alloy films

We investigated the superconducting (SC) properties of Ta-Nb-Hf-Zr-Ti high-entropy alloy (HEA) thin films with 0.5% weight C additives. The C additives stabilize the structural properties and enhance the SC critical properties, including $μ_0$Hc$_2$ (13.45 T) and Tc (7.5 K). The reflectance of the C-added HEA film is enhanced in the low-energy region, resulting in a higher optical conductivity, which is consistent with the lower electrical resistivity. In addition, we observed SC vortices in the C-added HEA film using magnetic force microscopy. The magnetic penetration depths ($λ$) of the pure HEA and C-added HEA films were estimated from their Meissner force curves by comparing them with those of a reference Nb film. At 4.2 K, the λ of the C-added film is 360 nm, shorter than that of the pure HEA film (560 nm), indicating stronger superconductivity against an applied magnetic field.

cond-mat.supr-con↗

arXiv2025

Altermagnetic Polar Metallic phase in Ultra-Thin Epitaxially-Strained RuO2 Films

Altermagnetism refers to a wide class of magnetic orders featuring magnetic sublattices with opposite spins related by rotational symmetries, resulting in non-trivial spin splitting and magnetic multipoles. However, the direct observation of the altermagnetic order parameter remains elusive. Here, by combining theoretical analysis, electrical transport, X-ray and optical spectroscopies, we establish a phase diagram in hybrid molecular beam epitaxy-grown RuO2/TiO2 (110) films, mapping symmetries along with altermagnetic/electronic/structural phase transitions as functions of film thickness and temperature. This features a novel altermagnetic metallic polar phase in epitaxially-strained 2 nm films, extending the concept of multiferroicity to altermagnets. Such a clear signature of a magnetic phase transition at ~500 K is observed exclusively in ultrathin strained films, unlike in bulk RuO2 single crystals. These results demonstrate the potential of epitaxial heterostructure design to induce altermagnetism, paving the way for emergent novel phases with multifunctional properties.

cond-mat.mtrl-sci↗

arXiv2025

Metallicity and Anomalous Hall Effect in Epitaxially-Strained, Atomically-thin RuO2 Films

The anomalous Hall effect (AHE), a hallmark of time-reversal symmetry breaking, has been reported in rutile RuO2, a debated metallic altermagnetic candidate. Previously, AHE in RuO2 was observed only in strain-relaxed thick films under extremely high magnetic fields (~50 T). Yet, in ultrathin strained films with distinctive anisotropic electronic structures, there are no reports, likely due to disorder and defects suppressing metallicity thus hindering its detection. Here, we demonstrate that ultrathin, fully-strained 2 nm TiO2/t nm RuO2/TiO2 (110) heterostructures, grown by hybrid molecular beam epitaxy, retain metallicity and exhibit a sizeable AHE at a significantly lower magnetic field (< 9 T). Density functional theory calculations reveal that epitaxial strain stabilizes a non-compensated magnetic ground state and reconfigures magnetic ordering in RuO2 (110) thin films. These findings establish ultrathin RuO2 as a platform for strain-engineered magnetism and underscore the transformative potential of epitaxial design in advancing spintronic technologies.

cond-mat.mtrl-sci↗

arXiv2024

Dimensionality Engineering of Magnetic Anisotropy from Anomalous Hall Effect in Synthetic SrRuO3 Crystals

Magnetic anisotropy in atomically thin correlated heterostructures is essential for exploring quantum magnetic phases for next-generation spintronics. Whereas previous studies have mostly focused on van der Waals systems, here, we investigate the impact of dimensionality of epitaxially-grown correlated oxides down to the monolayer limit on structural, magnetic, and orbital anisotropies. By designing oxide superlattices with a correlated ferromagnetic SrRuO3 and nonmagnetic SrTiO3 layers, we observed modulated ferromagnetic behavior with the change of the SrRuO3 thickness. Especially, for three-unit-cell-thick layers, we observe a significant 1,500% improvement of coercive field in the anomalous Hall effect, which cannot be solely attributed to the dimensional crossover in ferromagnetism. The atomic-scale heterostructures further reveal the systematic modulation of anisotropy for the lattice structure and orbital hybridization, explaining the enhanced magnetic anisotropy. Our findings provide valuable insights into engineering the anisotropic hybridization of synthetic magnetic crystals, offering a tunable spin order for various applications.

cond-mat.mtrl-sci↗

arXiv2024

Tunable electron scattering mechanism in plasmonic SrMoO$_3$ thin films

4d transition metal perovskite oxides serve as suitable testbeds for the study of strongly correlated metallic properties. Among these, $SrMoO_{3}$ (SMO) exhibits remarkable electrical conductivity at room temperature. The temperature-dependent resistivity $(ρ(T))$ exhibits a Fermi-liquid behavior below the transition temperature $T^{*}$, reflecting the dominant electron-electron interaction. Above $T^{*}$, electron-phonon interaction becomes more appreciable. In this study, we employed the power-law scaling of $ρ(T)$ to rigorously determine the $T^{*}$. We further demonstrate that the $T^{*}$ can be modified substantially by ~40 K in epitaxial thin films. It turns out that the structural quality determines $T^{*}$. Whereas the plasma frequency could be tuned by the change in the electron-electron interaction via the effective mass enhancement, we show that the plasmonic properties are more directly governed by the electron-impurity scattering. The facile control of the electron scattering mechanism through structural quality modulation can be useful for plasmonic sensing applications in the visible region.

cond-mat.str-el↗

arXiv2023

Correlated Quantum Phenomena of Spin-Orbit Coupled Perovskite Oxide Heterostructures: Cases of SrRuO3 and SrIrO3-Based Artificial Superlattices

Unexpected, yet useful functionalities emerge when two or more materials merge coherently. Artificial oxide superlattices realize atomic and crystal structures that are not available in nature, thus providing controllable correlated quantum phenomena. This review focuses on 4d and 5d oxide superlattices, in which the spin-orbit coupling plays a significant role compared with conventional 3d oxide superlattices. Modulations in crystal structures with octahedral distortion, phonon engineering, electronic structures, spin orderings, and dimensionality control are discussed for 4d oxide superlattices. Atomic and magnetic structures, Jeff = 1/2 pseudospin and charge fluctuations, and the integration of topology and correlation are discussed for 5d oxide superlattices. This review provides insights into how correlated quantum phenomena arise from the deliberate design of superlattice structures that give birth to novel functionalities.

cond-mat.str-el↗

arXiv2023

Exotic magnetic anisotropy near digitized dimensional Mott boundary

The magnetic anisotropy of low-dimensional Mott systems exhibits unexpected magnetotransport behavior useful for spin-based quantum electronics. Yet, the anisotropy of natural materials is inherently determined by the crystal structure, highly limiting its engineering. We demonstrate the magnetic anisotropy modulation near a digitized dimensional Mott boundary in artificial superlattices composed of a correlated magnetic monolayer SrRuO3 and nonmagnetic SrTiO3. The magnetic anisotropy is initially engineered by modulating the interlayer coupling strength between the magnetic monolayers. Interestingly, when the interlayer coupling strength is maximized, a nearly degenerate state is realized, in which the anisotropic magnetotransport is strongly influenced by both the thermal and magnetic energy scales. Our results offer a new digitized control for magnetic anisotropy in low-dimensional Mott systems, inspiring promising integration of Mottronics and spintronics.

cond-mat.str-el↗

arXiv2023

Application of Machine Learning to Sporadic Experimental Data for Understanding Epitaxial Strain Relaxation

Understanding epitaxial strain relaxation is one of the key challenges in functional thin films with strong structure-property relation. Herein, we employ an emerging data analytics approach to quantitatively evaluate the underlying relationships between critical thickness (hc) of strain relaxation and various physical and chemical features, despite the sporadic experimental data points available. First, we have collected and refined reported hc of perovskite oxide thin film/substrate system to construct a consistent sub-dataset which captures a common trend among the varying experimental details. Then, we employ correlation analyses and feature engineering to find the most relevant feature set which include Poisson's ratio and lattice mismatch. With the insight offered by correlation analyses and feature engineering, machine learning (ML) models have been trained to deduce a decent accuracy, which has been further validated experimentally. the demonstrated framework is expected to be efficiently extended to the other classes of thin films in understanding hc.

cond-mat.mtrl-sci↗

arXiv2023

Atomic-scale Modulation of Synthetic Magnetic Order in Oxide Superlattices

Atomic-scale precision control of magnetic interactions facilitates a synthetic spin order useful for spintronics, including advanced memory and quantum logic devices. Conventional modulation of synthetic spin order has been limited to metallic heterostructures that exploit RKKY interaction through a nonmagnetic metallic spacer; however, they face problems arising from Joule heating and/or electric breakdown. The practical realization and observation of a synthetic spin order across a nonmagnetic insulating spacer would lead to the development of spin-related devices with a completely different concept. Herein, we report the atomic-scale modulation of the synthetic spiral spin order in oxide superlattices composed of ferromagnetic metal and nonmagnetic insulator layers. The atomically controlled superlattice exhibit an oscillatory magnetic behavior, representing the existence of a spiral spin structure. Depth-sensitive polarized neutron reflectometry evidences modulated spiral spin structures as a function of the nonmagnetic insulator layer thickness. Atomic-scale customization of the spin state could lead the field one step further to actual spintronic applications.

cond-mat.str-el↗

arXiv2023

Atomic and Electronic Structures of Correlated SrRuO3/SrTiO3 Superlattices

Atomic-scale precision epitaxy of perovskite oxide superlattices provides unique opportunities for controlling the correlated electronic structures, activating effective control knobs for intriguing functionalities including electromagnetic, thermoelectric, and electrocatalytic behaviors. In this study, we investigated the close interplay between the atomic and electronic structures of correlated superlattices synthesized by atomic-scale precision epitaxy. In particular, we employ superlattices composed of correlated magnetic SrRuO3 (SRO) and quantum paraelectric SrTiO3 (STO) layers. In those superlattices, RuO6 octahedral distortion is systematically controlled from 167 to 175 degrees depending on the thickness of the STO layers, also affecting the TiO6 octahedral distortion within the STO layer. Customized octahedral distortion within SRO/STO superlattices in turn modifies the electronic structures of both the Ti and Ru compounds, observed by X-ray absorption spectroscopy. Our results identify the close correlation between atomic lattice and electronic structures enabled by the facile controllability of atomic-scale epitaxy, which would be useful for designing future correlated oxide devices.

cond-mat.mtrl-sci↗

arXiv2022

Tunable Ferromagnetism in LaCoO3 Epitaxial Thin Films

Ferromagnetic insulators play a crucial role in the development of low-dissipation quantum magnetic devices for spintronics. Epitaxial LaCoO3 thin film is a prominent ferromagnetic insulator, in which the robust ferromagnetic ordering emerges owing to epitaxial strain. Whereas it is evident that strong spin-lattice coupling induces ferromagnetism, the reported ferromagnetic properties of epitaxially strained LaCoO3 thin films were highly consistent. For example, even under largely modulated degree of strain, the reported Curie temperatures of epitaxially strained LaCoO3 thin films lie within 80-85 K, without much deviation. In this study, substantial enhancement (~18%) in the Curie temperature of epitaxial LaCoO3 thin films is demonstrated via crystallographic orientation dependence. By changing the crystallographic orientation of the films from (111) to (110), the crystal-field energy was reduced and the charge transfer between the Co and O orbitals was enhanced. These modifications led to a considerable enhancement of the ferromagnetic properties (including the Curie temperature and magnetization), despite the identical nominal degree of epitaxial strain. The findings of this study provide insights into facile tunability of ferromagnetic properties via structural symmetry control in LaCoO3.

cond-mat.mtrl-sci↗

arXiv2022

Atomistic Engineering of Phonons in Functional Oxide Heterostructures

Engineering of phonons, i.e., collective lattice vibrations in crystals, is essential for manipulating physical properties of materials such as thermal transport, electron-phonon interaction, confinement of lattice vibration, and optical polarization. Most approaches to phonon-engineering have been largely limited to the high-quality heterostructures of typical semiconductors. Yet, artificial engineering of phonons in a variety of materials with functional properties, such as complex oxides, will yield unprecedented applications of coherent tunable phonons in future quantum acoustic devices. In this study, we demonstrate artificial engineering of phonons in the atomic-scale SrRuO3/SrTiO3 superlattices, wherein tunable phonon modes were observed via confocal Raman spectroscopy. In particular, the coherent superlattices led to the backfolding of acoustic phonon dispersion, resulting in zone-folded acoustic phonons in the THz frequency domain. We could further fine-tune the frequencies from 1 to 2 THz via atomic-scale precision thickness control. In addition, we observed a polar optical phonon originating from the local inversion symmetry breaking in the artificial oxide superlattices, exhibiting emergent functionality. Our approach of atomic-scale heterostructuring of complex oxides will vastly expand material systems for quantum acoustic devices, especially with the viability of functionality integration.

cond-mat.mtrl-sci↗