arXiv subjects

X. Cheng

Publications and source records attributed to X. Cheng.

At least 37 records · Page 2Linked to original sources

arXiv2022

Grow-up of a Filament Channel by Intermittent Small-scale Magnetic Reconnection

Filament channel (FC), a plasma volume where the magnetic field is primarily aligned with the polarity inversion line, is believed to be the pre-eruptive configuration of coronal mass ejections. Nevertheless, evidence for how the FC is formed is still elusive. In this paper, we present a detailed study on the build-up of a FC to understand its formation mechanism. The New Vacuum Solar Telescope of Yunnan Observatories and Optical and Near-Infrared Solar Eruption Tracer of Nanjing University, as well as the AIA and HMI on board Solar Dynamics Observatory are used to study the grow-up process of the FC. Furthermore, we reconstruct the non-linear force-free field (NLFFF) of the active region using the regularized Biot-Savart laws (RBSL) and magnetofrictional method to reveal three-dimension (3D) magnetic field properties of the FC. We find that partial filament materials are quickly transferred to longer magnetic field lines formed by small-scale magnetic reconnection, as evidenced by dot-like Hα/EUV brightenings and subsequent bidirectional outflow jets, as well as untwisting motions. The Hα/EUV bursts appear repeatedly at the same location and are closely associated with flux cancellation, which occurs between two small-scale opposite polarities and is driven by shearing and converging motions. The 3D NLFFF model reveals that the reconnection takes place in a hyperbolic flux tube that is located above the flux cancellation site and below the FC. The FC is gradually built up toward a twisted flux rope via series of small-scale reconnection events that occur intermittently prior to the eruption.

astro-ph.SR↗

arXiv2021

Faraday rotation study of plasma bubbles in GeV wakefield accelerators

We visualize plasma bubbles driven by 0.67 PW laser pulses in plasma of density $n_e \approx 5\times10^{17}$ ${\rm cm}^{-3}$ by imaging Faraday rotation patterns imprinted on linearly-polarized probe pulses of wavelength $λ_{pr} = 1.05 μ$m and duration $τ_{pr} = 2$ ps or $1$ ps that cross the bubble's path at right angles. When the bubble captures and accelerates tens to hundreds of pC of electron charge, we observe two parallel streaks of length $cτ_{pr}$ straddling the drive pulse propagation axis, separated by $\sim45$ $μ$m, in which probe polarization rotates by $0.3^\circ$ to more than $5^\circ$ in opposite directions. Accompanying simulations show that they result from Faraday rotation within portions of dense bubble side walls that are pervaded by the azimuthal magnetic field of accelerating electrons during the probe transit across the bubble. Analysis of the width of the streaks shows that quasi-monoenergetic high-energy electrons and trailing lower energy electrons inside the bubble contribute distinguishable portions of the observed signals, and that relativistic flow of sheath electrons suppresses Faraday rotation from the rear of the bubble. The results demonstrate favorable scaling of Faraday rotation diagnostics to $40\times$ lower plasma density than previously demonstrated.

physics.plasm-ph↗

arXiv2021

Thermodynamic Evolution of Solar Flare Supra-arcade Downflows

Solar flares are rapid energy release phenomena that appear as bright ribbons in the chromosphere and high-temperature loops in the corona, respectively. Supra-arcade Downflows (SADs) are plasma voids that first come out above the flare loops and then move quickly towards the flare loop top during the decay phase of the flare. In our work, we study 20 SADs appearing in three flares. By differential emission measure (DEM) analysis, we calculate the DEM weighted average temperature and emission measure (EM) of the front region and the main body of SADs. It is found that the temperatures of the SAD front and body tend to increase during the course of SADs flowing downwards. The relationship between the pressure and temperature fits well with the adiabatic equation for both the SAD front and body, suggesting that the heating of SADs is mainly caused by adiabatic compression. Moreover, we also estimate the velocities of SADs via the Fourier Local Correlation Tracking (FLCT) method and find that increase of the temperature of the SAD front presents a correlation with the decrease of the SAD kinetic energy, while the SAD body does not, implying that the viscous process may also heat the SAD front in spite of a limited role.

astro-ph.SR↗

arXiv2021

Compact Spectral Characterization of 5-500 MeV X-rays from the Texas Petawatt Laser-Driven Plasma Accelerator

We reconstruct spectra of secondary x-rays generated from a 500 MeV - 2 GeV laser plasma electron accelerator. A compact (7.5 $\times$ 7.5 $\times$ 15 cm), modular x-ray calorimeter made of alternating layers of absorbing materials and imaging plates records the single-shot x-ray depth-energy distribution. X-rays range from few-MeV inverse Compton scattered x-rays to $\sim$100 MeV average bremsstrahlung energies and are characterized individually by the same calorimeter detector. Geant4 simulations of energy deposition from mono-energetic x-rays in the stack generate an energy-vs-depth response matrix for the given stack configuration. A fast, iterative reconstruction algorithm based on analytic models of inverse Compton scattering and bremsstrahlung photon energy distributions then unfolds x-ray spectra in $\sim10$ seconds.

physics.acc-ph↗

arXiv2021

From Formation to Disruption: Observing the Multiphase Evolution of a Solar Flare Current Sheet

A current sheet, where magnetic energy is liberated through reconnection and is converted to other forms, is thought to play the central role in solar flares, the most intense explosions in the heliosphere. However, the evolution of a current sheet and its subsequent role in flare-related phenomena such as particle acceleration is poorly understood. Here we report observations obtained with NASA's Solar Dynamics Observatory that reveal a multiphase evolution of a current sheet in the early stages of a solar flare, from its formation to quasi-stable evolution and disruption. Our observations have implications for the understanding of the onset and evolution of reconnection in the early stages of eruptive solar flares.

astro-ph.SR↗

arXiv2020

The Kinematic Evolution of Erupting Structures in Confined Solar Flares

In this Letter, we study the kinematic properties of ascending hot blobs associated with confined flares. Taking advantage of high-cadence extreme-ultraviolet images provided by the Atmospheric Imaging Assembly on board the Solar Dynamics Observatory, we find that for the 26 events selected here, the hot blobs are first impulsively accelerated outward, but then quickly slow down to motionlessness. Their velocity evolution is basically synchronous with the temporal variation of the Geostationary Operational Environmental Satellite soft X-ray flux of the associated flares, except that the velocity peak precedes the soft X-ray peak by minutes. Moreover, the duration of the acceleration phase of the erupting blobs is moderately correlated with that of the flare rise phase. For nine of the 26 cases, the erupting blobs even appear minutes prior to the onset of the associated flares. Our results show that a fraction of confined flares also involve the eruption of a magnetic flux rope, which sometimes is formed and heated prior to the flare onset. We suggest that the initiation and development of these confined flares are similar to that of eruptive ones, and the main difference may lie in the background field constraint, which is stronger for the former than for the latter.

astro-ph.SR↗

arXiv2020

Evolution of the Toroidal Flux of CME Flux Ropes during Eruption

Coronal mass ejections (CMEs) are large-scale explosions of the coronal magnetic field. It is believed that magnetic reconnection significantly builds up the core structure of CMEs, a magnetic flux rope, during the eruption. However, the quantitative evolution of the flux rope, particularly its toroidal flux, is still unclear. In this paper, we study the evolution of the toroidal flux of the CME flux rope for four events. The toroidal flux is estimated as the magnetic flux in the footpoint region of the flux rope, which is identified by a method that simultaneously takes the coronal dimming and the hook of the flare ribbon into account. We find that the toroidal flux of the CME flux rope for all four events shows a two-phase evolution: a rapid increasing phase followed by a decreasing phase. We further compare the evolution of the toroidal flux with that of the Geostationary Operational Environmental Satellites soft X-ray flux and find that they are basically synchronous in time, except that the peak of the former is somewhat delayed. The results suggest that the toroidal flux of the CME flux rope may be first quickly built up by the reconnection mainly taking place in the sheared overlying field and then reduced by the reconnection among the twisted field lines within the flux rope, as enlightened by a recent 3D magnetohydrodynamic simulation of CMEs.

astro-ph.SR↗

arXiv2020

Decoding the Pre-Eruptive Magnetic Field Configurations of Coronal Mass Ejections

A clear understanding of the nature of the pre-eruptive magnetic field configurations of Coronal Mass Ejections (CMEs) is required for understanding and eventually predicting solar eruptions. Only two, but seemingly disparate, magnetic configurations are considered viable; namely, sheared magnetic arcades (SMA) and magnetic flux ropes (MFR). They can form via three physical mechanisms (flux emergence, flux cancellation, helicity condensation) . Whether the CME culprit is an SMA or an MFR, however, has been strongly debated for thirty years. We formed an International Space Science Institute (ISSI) team to address and resolve this issue and report the outcome here. We review the status of the field across modeling and observations, identify the open and closed issues, compile lists of SMA and MFR observables to be tested against observations and outline research activities to close the gaps in our current understanding. We propose that the combination of multi-viewpoint multi-thermal coronal observations and multi-height vector magnetic field measurements is the optimal approach for resolving the issue conclusively. We demonstrate the approach using MHD simulations and synthetic coronal images. Our key conclusion is that the differentiation of pre-eruptive configurations in terms of SMAs and MFRs seems artificial. Both observations and modeling can be made consistent if the pre-eruptive configuration exists in a hybrid state that is continuously evolving from an SMA to an MFR. Thus, the 'dominant' nature of a given configuration will largely depend on its evolutionary stage (SMA-like early-on, MFR-like near the eruption).

astro-ph.SR↗

arXiv2020

Li4-xGe1-xPxO4 a potential solid-state electrolyte for all-oxide microbatteries

Solid-state electrolytes for Li-ion batteries are attracting growing interest as they allow building safer batteries, also using lithium metal anodes. Here we studied a compound in the lithium superionic conductor (LISICON) family, i.e. Li4-xGe1-xPxO4 (LGPO). Thin films were deposited via pulsed laser deposition and their electrical properties were compared with ceramic pellets. A detailed characterization of the micro structure shows that thin films can be deposited fully crystalline at higher temperatures but also partially amorphous at room temperature. The conductivity is not strongly influenced by the presence of grain boundaries, exposure to air or lithium deficiencies. First-principles molecular dynamics simulations were employed to calculate the lithium ion diffusion profile and the conductivity at various temperatures of the ideal LGPO crystal. Simulations gives the upper limit of conductivity for a defect free crystal, which is in the range of 10-2 S cm-1 at 300 deg. The ease of thin film fabrication, the room-temperature Li-ion conductivity in the range of a few microS cm-1 make LGPO a very appealing electrolyte material for thin film all-solid-state all-oxide microbatteries.

cond-mat.mtrl-sci↗

arXiv2020

The Lyman-alpha Emission in Solar Flares. I. a Statistical Study on Its Relationship with the 1--8 Å Soft X-ray Emission

We statistically study the relationship between the Lyman-alpha (\lya) and 1--8 Å soft X-ray (SXR) emissions from 658 M- and X-class solar flares observed by the {\em Geostationary Operational Environmental Satellite} during 2006--2016. Based on the peak times of the two waveband emissions, we divide the flares into three types. Type I (III) has an earlier (a later) peak time in the \lya\ emission than that in the SXR emission, while type II has nearly a same peak time (within the time resolution of 10 s) between the \lya\ and SXR emissions. In these 658 flares, we find that there are 505 (76.8\%) type I flares, 10 (1.5\%) type II flares, and 143 (21.7\%) type III flares, and that the three types appear to have no dependence on the flare duration, flare location, or solar cycle. Besides the main peak, the \lya\ emission of the three type flares also shows sub-peaks which can appear in the impulsive or gradual phase of the flare. It is found that the main-peak (for type I) and sub-peak (for type III) emissions of \lya\ that appear in the impulsive phase follow the Neupert effect in general. This indicates that such \lya\ emissions are related to the nonthermal electron beam heating. While the main-peak (for type III) and sub-peak (for type I) emissions of \lya\ that appear in the gradual phase are supposed to be primarily contributed by the thermal plasma that cools down.

astro-ph.SR↗

arXiv2020

When do solar erupting hot magnetic flux ropes form?

We investigate the formation times of eruptive magnetic flux ropes relative to the onset of solar eruptions, which is important for constraining models of coronal mass ejection (CME) initiation. We inspected uninterrupted sequences of 131 Å images that spanned more than eight hours and were obtained by the Atmospheric Imaging Assembly (AIA) on board the Solar Dynamics Observatory (SDO) to identify the formation times of hot flux ropes that erupted in CMEs from locations close to the limb. The appearance of the flux ropes as well as their evolution toward eruptions were determined using morphological criteria. Two-thirds (20/30) of the flux ropes were formed well before the onset of the eruption (from 51 minutes to more than eight hours), and their formation was associated with the occurrence of a confined flare. We also found four events with preexisting hot flux ropes whose formations occurred a matter of minutes (from three to 39) prior to the eruptions without any association with distinct confined flare activity. Six flux ropes were formed once the eruptions were underway. However, in three of them, prominence material could be seen in 131 Å images, which may indicate the presence of preexisting flux ropes that were not hot. The formation patterns of the last three groups of hot flux ropes did not show significant differences. For the whole population of events, the mean and median values of the time difference between the onset of the eruptive flare and the appearance of the hot flux rope were 151 and 98 minutes, respectively. Our results provide, on average, indirect support for CME models that involve preexisting flux ropes; on the other hand, for a third of the events, models in which the ejected flux rope is formed during the eruption appear more appropriate.

astro-ph.SR↗

arXiv2020

What determine Solar Flares Producing Interplanetary Type III Radio Bursts?

Energetic electrons accelerated by solar flares often give rise to type III radio bursts at a broad waveband and even interplanetary type III bursts (IT3) if the wavelength extends to decameter-kilometer. In this Letter, we investigate the probability of the flares that produce IT3, based on the sample of 2272 flares above M-class observed from 1996 to 2016. It is found that only 49.6% of the flares are detected to be accompanied with IT3. The duration, peak flux, and fluence of the flares with and without IT3 both present power-law distributions in the frequency domain, but the corresponding spectral indices for the former (2.06$\pm$0.17, 2.04$\pm$0.18, and 1.55$\pm$0.09) are obviously smaller than that for the latter (2.82$\pm$0.22, 2.51$\pm$0.19, and 2.40$\pm$0.09), showing that the flares with IT3 have longer durations and higher peak fluxes. We further examine the relevance of coronal mass ejections (CMEs) to the two groups of flares. It is found that 58% (655 of 1127) of the flares with IT3 but only 19% (200 of 1078) of the flares without IT3 are associated with CMEs, and that the associated CMEs for the flares with IT3 are inclined to be wider and faster. This indicates that CMEs may also play a role in producing IT3, speculatively facilitating the escape of accelerated electrons from the low corona to the interplanetary space.

astro-ph.SR↗

arXiv2020

648 Hilbert space dimensionality in a biphoton frequency comb

Qubit entanglement is a valuable resource for quantum information processing, where increasing its dimensionality provides a pathway towards higher capacity and increased error resilience in quantum communications, cluster computation and quantum phase measurements. Time-frequency entanglement, a continuous variable subspace, enables the high-dimensional encoding of multiple qubits per particle, bounded only by the spectral correlation bandwidth and readout timing jitter. Extending from a dimensionality of two in discrete polarization variables, here we demonstrate a hyperentangled, mode-locked, biphoton frequency comb with a time-frequency Hilbert space dimensionality of at least 648. Hong-Ou-Mandel revivals of the biphoton qubits are observed with 61 time-bin recurrences, biphoton joint spectral correlations over 19 frequency-bins, and an overall interference visibility of the high-dimensional qubits up to 98.4%. We describe the Schmidt mode decomposition analysis of the high-dimensional entanglement, in both time- and frequency-bin subspaces, not only verifying the entanglement dimensionality but also examining the time-frequency scaling. We observe a Bell violation of the high-dimensional qubits up to 18.5 standard deviations, with recurrent correlation-fringe Clauser-Horne-Shimony-Holt S-parameter up to 2.771. Our biphoton frequency comb serves as a platform for dense quantum information processing and high-dimensional quantum key distribution.

quant-ph↗

arXiv2020

Initiation and Early Kinematic Evolution of Solar Eruptions

We investigate the initiation and early evolution of 12 solar eruptions, including six active region hot channel and six quiescent filament eruptions, which were well observed by the \textsl{Solar Dynamics Observatory}, as well as by the \textsl{Solar TErrestrial RElations Observatory} for the latter. The sample includes one failed eruption and 11 coronal mass ejections, with velocities ranging from 493 to 2140~km~s$^{-1}$. A detailed analysis of the eruption kinematics yields the following main results. (1) The early evolution of all events consists of a slow-rise phase followed by a main-acceleration phase, the height-time profiles of which differ markedly and can be best fit, respectively, by a linear and an exponential function. This indicates that different physical processes dominate in these phases, which is at variance with models that involve a single process. (2) The kinematic evolution of the eruptions tends to be synchronized with the flare light curve in both phases. The synchronization is often but not always close. A delayed onset of the impulsive flare phase is found in the majority of the filament eruptions (5 out of 6). This delay, and its trend to be larger for slower eruptions, favor ideal MHD instability models. (3) The average decay index at the onset heights of the main acceleration is close to the threshold of the torus instability for both groups of events (although based on a tentative coronal field model for the hot channels), suggesting that this instability initiates and possibly drives the main acceleration.

astro-ph.SR↗

arXiv2019

Quantifying the Toroidal Flux of Pre-existing Flux Ropes of CMEs

In past decades, much progress has been achieved on the origin and evolution of coronal mass ejections (CMEs). In-situ observations of the counterparts of CMEs, especially magnetic clouds (MCs) near the Earth, have provided measurements of the structure and total flux of CME flux ropes. However, it has been difficult to measure these properties in the erupting CME flux rope, in particular in the pre-existing flux rope. In this work, we propose a model to estimate the toroidal flux of the pre-existing flux rope by subtracting the flux contributed by magnetic reconnection during the eruption from the flux measured in the MC. The flux by the reconnection is derived from geometric properties of two-ribbon flares based on a quasi-2D reconnection model. We then apply the model to four CME/flare events and find that the ratio of toroidal flux in the pre-existing flux rope to that of the associated MC lies in the range of 0.40--0.88. It indicates that the toroidal flux of the pre-existing flux rope has an important contribution to that of the CME flux rope and is usually at least as large as the flux arising from the eruption process for the selected events.

astro-ph.SR↗

arXiv2019

Formation and Eruption of a Mini-sigmoid Originating in Coronal Hole

In this paper, we study in detail the evolution of a mini-sigmiod originating in a cross-equatorial coronal hole, where the magnetic field is mostly open and seriously distinct from the closed background field above active-region sigmoids. The source region first appeared as a bipole, which subsequently experienced a rapid emergence followed by a long-term decay. Correspondingly, the coronal structure initially appeared as arc-like loops, then gradually sheared and transformed into continuously sigmoidal loops, mainly owing to flux cancellation near the polarity inversion line. The temperature of J-shaped and sigmoidal loops is estimated to be about $2.0\times10^{6}$ K, greater than that of the background coronal hole. Using the flux-rope insertion method, we further reconstruct the nonlinear force-free fields that well reproduces the transformation of the potential field into a sigmoidal field. The fact that the sheared and sigmoidal loops are mainly concentrated at around the high-Q region implies that the reconnection most likely takes place there to form the sigmoidal field and heat the plasma. Moreover, the twist of sigmoidal field lines is estimated to be around 0.8, less than the values derived for the sigmoids from active regions. However, the sigmoidal flux may quickly enter an unstable regime at the very low corona ($<10\ Mm$) due to the open background field. The results suggest that the mini-sigmoid, at least the one in our study, has the same formation and eruption process as the large-scale one, but is significantly influenced by the overlying flux.

astro-ph.SR↗

arXiv2019

Triggering mechanism and material transfer of a failed solar filament eruption

Soar filament eruptions are often associated with solar flares and coronal mass ejections (CMEs), which are the major impacts on space weather. However, the fine structures and the trigger mechanisms of solar filaments are still unclear. To address these issues, we studied a failed solar active-region filament eruption associated with a C-class flare by using high-resolution H$α$ images from the New Vacuum Solar Telescope (NVST), supplemented by EUV observations of the Solar Dynamical Observatory (SDO). Before the filament eruption, a small bi-pole magnetic field emerged below the filament. And then magnetic reconnection between the filament and the emerging bi-pole magnetic field triggered the filament eruption. During the filament eruption, the untwisting motion of the filament can be clearly traced by the eruptive threads. Moreover, the foot-points of the eruptive threads are determined by tracing the descending filament materials. Note that the filament twisted structure and the right part of the eruptive filament threads cannot be seen before the filament eruption. These eruptive threads at the right part of the filament are found to be rooting in the weak negative polarities near the main negative sunspot. Moreover, a new filament formed in the filament channel due to material injection from the eruptive filament. The above observations and the potential field extrapolations are inclined to support that the filament materials were transferred into the overlying magnetic loops and the nearby filament channel by magnetic reconnection. These observations shed light on better understanding on the complexity of filament eruptions.

astro-ph.SR↗

arXiv2019

Synthesising Solar Radio Images From Atmospheric Imaging Assembly Extreme-Ultraviolet Data

During non-flaring times, the radio flux of the Sun at the wavelength of a few centimeters to several tens of centimeters mostly originates from the thermal bremsstrahlung emission, very similar to the EUV radiation. Owing to such a proximity, it is feasible to investigate the relationship between the EUV emission and radio emission in a quantitative way. In this paper, we reconstruct the radio images of the Sun through the differential emission measure obtained from the multi-wavelength EUV images of the Atmospheric Imaging Assembly on board Solar Dynamic Observatory. Through comparing the synthetic radio images at 6 GHz with those observed by Siberian Radioheliograph, we find that the predicted radio flux is qualitatively consistent with the observed value, confirming thermal origin of the coronal radio emission during non-flaring times. The results further show that the predicted radio flux is closer to the observations in the case of including the contribution of the plasma with temperatures above 3 MK than in the case of only involving the low temperature plasma as was usually done in the era of pre-SDO. We also discuss the applications of the method and uncertainties of the results.

astro-ph.SR↗