SearcharxivSearch

arXiv subjects

X. F. Han

Publications and source records attributed to X. F. Han.

At least 19 recordsLinked to original sources

Quantum-well resonances caused by partial confinement in MgO-based magnetic tunnel junctions

Quantum-well resonance is achieved through partial confinement in magnetic tunnel junctions (MTJs), which provides an additional operable degree of freedom to regulate quantum-well levels. Using Al/Fe/MgO/Fe/Al and Ag/Al/Fe/MgO/Fe/Al/Ag MTJs as examples, via first-principles calculations, we demonstrate that the partial confinement of $Δ_1$ electron at Al/Fe interface and the full confinement at Fe/MgO interface combine to produce quantum-well resonances in Fe. The quantum-well levels of Fe can be periodically adjusted by two degrees of freedom: Fe and Al thickness. The oscillation period obtained from conductance $G_{\uparrow\uparrow}$ is 2.13 ML Fe (9 ML Al), close to 2.25 ML Fe (8.33 ML Al) calculated by bcc-Fe (fcc-Al) band. The combination of long and short periods enables quantum-well levels to be finely adjusted. An ultrahigh optimistic TMR effect of $3.05\times10$$^5$\% is achieved. Our results provides a new path for designing and applying quantum-well resonances in spintronics devices.

cond-mat.mtrl-sci

Stochastic p-Bits Based on Spin-Orbit Torque Magnetic Tunnel Junctions

Stochastic p-Bit devices play a pivotal role in solving NP-hard problems, neural network computing, and hardware accelerators for algorithms such as the simulated annealing. In this work, we focus on Stochastic p-Bits based on high-barrier magnetic tunnel junctions (HB-MTJs) with identical stack structure and cell geometry, but employing different spin-orbit torque (SOT) switching schemes. We conducted a comparative study of their switching probability as a function of pulse amplitude and width of the applied voltage. Through experimental and theoretical investigations, we have observed that the Y-type SOT-MTJs exhibit the gentlest dependence of the switching probability on the external voltage. This characteristic indicates superior tunability in randomness and enhanced robustness against external disturbances when Y-type SOT-MTJs are employed as stochastic p-Bits. Furthermore, the random numbers generated by these Y-type SOT-MTJs, following XOR pretreatment, have successfully passed the National Institute of Standards and Technology (NIST) SP800-22 test. This comprehensive study demonstrates the high performance and immense potential of Y-type SOT-MTJs for the implementation of stochastic p-Bits.

cond-mat.mes-hall

Comparison of spin-wave transmission in parallel and antiparallel magnetic configurations

Parallel (P) and antiparallel (AP) configurations are widely applied in magnetic heterostructures and have significant impacts on the spin-wave transmission in magnonic devices. In the present study, a theoretical investigation was conducted into the transmission of exchange-dominated spin waves with nanoscale wavelengths in a type of heterostructure including two magnetic media, of which the magnetization state can be set to the P (AP) configuration by ferromagnetic (antiferromagnetic) interfacial exchange coupling (IEC). The boundary conditions in P and AP cases were derived, by which the transmission and reflection coefficients of spin waves were analytically given and numerically calculated. In the P configuration, a critical angle $θ_{\textrm{c}}$ always exists and has a significant influence on the transmission. Spin waves are refracted and reflected when the incident angle $θ_{\textrm{i}}$ is smaller than the critical angle ($θ_{\textrm{i}} < θ_{\textrm{c}}$), while total reflection occurs as $θ_{\textrm{i}} \geq θ_{\textrm{c}}$. In the AP configuration, the spin-wave polarizations of medium 1 and 2 are inverse, that is, right-handed (RH) and left-handed (LH), leading to the total reflection being independent of $θ_{\textrm{i}}$. As demonstrated by the difference in spin-wave transmission properties between the P ($θ_{\textrm{i}} < θ_{\textrm{c}}$) and AP cases, there is a polarization-dependent scattering. However, as $θ_{\textrm{i}}$ exceeds $θ_{\textrm{c}}$, the P ($θ_{\textrm{i}} > θ_{\textrm{c}}$) case exhibits similarities with the AP case, where the transmitted waves are found to be evanescent in medium 2 and their decay lengths are investigated.

cond-mat.mes-hall

Continuous nucleation switching driven by spin-orbit torques

Continuous switching driven by spin-orbit torque (SOT) is preferred to realize neuromorphic computing in a spintronic manner. Here we have applied focused ion beam (FIB) to selectively illuminate patterned regions in a Pt/Co/MgO strip with perpendicular magnetic anisotropy (PMA), soften the illuminated areas and realize the continuous switching by a SOT-driven nucleation process. It is found that a large in-plane field is a benefit to reduce the nucleation barrier, increase the number of nucleated domains and intermediate states during the switching progress, and finally flatten the switching curve. We proposed a phenomenological model for descripting the current dependence of magnetization and the dependence of the number of nucleation domains on the applied current and magnetic field. This study can thus promote the birth of SOT devices, which are promising in neuromorphic computing architectures.

physics.app-ph

Electrical spin injection into InGaAs/GaAs quantum wells: a comparison between MgO tunnel barriers grown by sputtering and molecular beam epitaxy methods

An efficient electrical spin injection into an InGaAs/GaAs quantum well light emitting diode is demonstrated thanks to a CoFeB/MgO spin injector. The textured MgO tunnel barrier is fabricated by two different techniques: sputtering and molecular beam epitaxy (MBE). The maximal spin injection efficiency is comparable for both methods. Additionally, the effect of annealing is also investigated for the two types of samples. Both samples show the same trend: an increase of the electroluminescence circular polarization (Pc) with the increase of annealing temperature, followed by a saturation of Pc beyond 350°C annealing. Since the increase of Pc starts well below the crystallization temperature of the full CoFeB bulk layer, this trend could be mainly due to an improvement of chemical structure at the top CoFeB/MgO interface. This study reveals that the control of CoFeB/MgO interface is essential important for an optimal spin injection into semiconductor.

cond-mat.mtrl-sci

Evidence of Pure Spin-Current Generated by Spin Pumping in Interface Localized States in Hybrid Metal-Silicon-Metal Vertical Structures

Due to the difficulty to grow high quality semiconductors on ferromagnetic metals, the study of spin diffusion transport in Si was only limited to lateral geometry devices. In this work, by using ultra-high vacuum wafer-bonding technique, we have successfully fabricated metal semiconductor metal CoFeB/MgO/Si/Pt vertical structures. We hereby demonstrate pure spin-current injection and transport in the perpendicular current flow geometry over a distance larger than 2μm in n-type Si at room temperature. In those experiments, a pure propagating spin-current is generated via ferromagnetic resonance spin-pumping and converted into a measurable voltage by using the inverse spin-Hall effect occurring in the top Pt layer. A systematic study by varying both Si and MgO thicknesses reveals the important role played by the localized states at the MgO/Si interface for the spin-current generation. Proximity effects involving indirect exchange interactions between the ferromagnet and the MgO/Si interface states appears to be a prerequisite to establish the necessary out-of-equilibrium spin-population in Si under the spin-pumping action.

cond-mat.mtrl-sci

Magnon Valves Based on YIG/NiO/YIG All-Insulating Magnon Junctions

As an alternative angular momentum carrier, magnons or spin waves can be utilized to encode information and breed magnon-based circuits with ultralow power consumption and non-Boolean data processing capability. In order to construct such a circuit, it is indispensable to design some electronic components with both long magnon decay and coherence length and effective control over magnon transport. Here we show that an all-insulating magnon junctions composed by a magnetic insulator (MI1)/antiferromagnetic insulator (AFI)/magnetic insulator (MI2) sandwich (Y3Fe5O12/NiO/Y3Fe5O12) can completely turn a thermogradient-induced magnon current on or off as the two Y3Fe5O12 layers are aligned parallel or anti-parallel. The magnon decay length in NiO is about 3.5~4.5 nm between 100 K and 200 K for thermally activated magnons. The insulating magnon valve (magnon junction), as a basic building block, possibly shed light on the naissance of efficient magnon-based circuits, including non-Boolean logic, memory, diode, transistors, magnon waveguide and switches with sizable on-off ratios.

physics.app-ph

Electrical initialization of electron and nuclear spins in a single quantum dot at zero magnetic field

The emission of circularly polarized light from a single quantum dot relies on the injection of carriers with well-defined spin polarization. Here we demonstrate single dot electroluminescence (EL) with a circular polarization degree up to 35% at zero applied magnetic field. The injection of spin polarized electrons is achieved by combining ultrathin CoFeB electrodes on top of a spin-LED device with p-type InGaAs quantum dots in the active region. We measure an Overhauser shift of several $μ$eV at zero magnetic field for the positively charged exciton (trion X$^+$) EL emission, which changes sign as we reverse the injected electron spin orientation. This is a signature of dynamic polarization of the nuclear spins in the quantum dot induced by the hyperfine interaction with the electrically injected electron spin. This study paves the way for electrical control of nuclear spin polarization in a single quantum dot without any external magnetic field.

cond-mat.mes-hall

Magnon Valve Effect Between Two Magnetic Insulators

The key physics of the spin valve involves spin-polarized conduction electrons propagating between two magnetic layers such that the device conductance is controlled by the relative magnetization orientation of two magnetic layers. Here, we report the effect of a magnon valve which is made of two ferromagnetic insulators (YIG) separated by a nonmagnetic spacer layer (Au). When a thermal gradient is applied perpendicular to the layers, the inverse spin Hall voltage output detected by a Pt bar placed on top of the magnon valve depends on the relative orientation of the magnetization of two YIG layers, indicating the magnon current induced by spin Seebeck effect at one layer affects the magnon current in the other layer separated by Au. We interpret the magnon valve effect by the angular momentum conversion and propagation between magnons in two YIG layers and conduction electrons in the Au layer. The temperature dependence of magnon valve ratio shows approximately a power law, supporting the above magnon-electron spin conversion mechanism. This work opens a new class of valve structures beyond the conventional spin valves.

cond-mat.mes-hall

Tunneling anisotropic magnetoresistance driven by magnetic phase transition

The independent control of two magnetic electrodes and spin-coherent transport in magnetic tunnel junctions are strictly required for tunneling magnetoresistance, while junctions with only one ferromagnetic electrode exhibit tunneling anisotropic magnetoresistance dependent on the anisotropic density of states with no room temperature performance so far. Here we report an alternative approach to obtaining tunneling anisotropic magnetoresistance in alfa-FeRh-based junctions driven by the magnetic phase transition of alfa-FeRh and resultantly large variation of the density of states in the vicinity of MgO tunneling barrier, referred to as phase transition tunneling anisotropic magnetoresistance. The junctions with only one alfa-FeRh magnetic electrode show a magnetoresistance ratio up to 20% at room temperature. Both the polarity and magnitude of the phase transition tunneling anisotropic magnetoresistance can be modulated by interfacial engineering at the alfa-FeRh/MgO interface. Besides the fundamental significance, our finding might add a different dimension to magnetic random access memory and antiferromagnet spintronics.

cond-mat.mtrl-sci

Determination of spin relaxation times in heavy metals via 2nd harmonic spin injection magnetoresistance

In tunnel junctions between ferromagnets and heavy elements with strong spin orbit coupling the magnetoresistance is often dominated by tunneling anisotropic magnetoresistance (TAMR). This makes conventional DC spin injection techniques impractical for determining the spin relaxation time ($τ_s$). Here, we show that this obstacle for measurements of $τ_s$ can be overcome by 2nd harmonic spin-injection-magnetoresistance (SIMR). In the 2nd harmonic signal the SIMR is comparable in magnitude to TAMR, thus enabling Hanle-induced SIMR as a powerful tool to directly determine $τ_s$. Using this approach we determined the spin relaxation time of Pt and Ta and their temperature dependences. The spin relaxation in Pt seems to be governed by Elliott-Yafet mechanism due to a constant resistivity $\times$spin relaxation time product over a wide temperature range.

cond-mat.mtrl-sci

Spin-orbit torque in MgO/CoFeB/Ta/CoFeB/MgO symmetric structure with interlayer antiferromagnetic coupling

Spin current generated by spin Hall effect in the heavy metal would diffuse up and down to adjacent ferromagnetic layers and exert torque on their magnetization, called spin-orbit torque. Antiferromagnetically coupled trilayers, namely the so-called synthetic antiferromagnets (SAF), are usually employed to serve as the pinned layer of spintronic devices based on spin valves and magnetic tunnel junctions to reduce the stray field and/or increase the pinning field. Here we investigate the spin-orbit torque in MgO/CoFeB/Ta/CoFeB/MgO perpendicularly magnetized multilayer with interlayer antiferromagnetic coupling. It is found that the magnetization of two CoFeB layers can be switched between two antiparallel states simultaneously. This observation is replicated by the theoretical calculations by solving Stoner-Wohlfarth model and Landau-Lifshitz-Gilbert equation. Our findings combine spin-orbit torque and interlayer coupling, which might advance the magnetic memories with low stray field and low power consumption.

cond-mat.mtrl-sci

Electrical control over perpendicular magnetization switching driven by spin-orbit torques

Flexible control of magnetization switching by electrical manners is crucial for applications of spin-orbitronics. Besides of a switching current that is parallel to an applied field, a bias current that is normal to the switching current is introduced to tune the magnitude of effective damping-like and field-like torques and further to electrically control magnetization switching. Symmetrical and asymmetrical control over the critical switching current by the bias current with opposite polarities is both realized in Pt/Co/MgO and $α$-Ta/CoFeB/MgO systems, respectively. This research not only identifies the influences of field-like and damping-like torques on switching process but also demonstrates an electrical method to control it.

cond-mat.mtrl-sci

Gap state charge induced spin-dependent negative differential resistance in tunnel junctions

We propose and demonstrate through first-principles calculation a new spin-dependent negative differential resistance (NDR) mechanism in magnetic tunnel junctions (MTJ) with cubic cation disordered crystals (CCDC) AlO$_x$ or Mg$_{1-x}$Al$_x$O as barrier materials. The CCDC is a class of insulators whose band gap can be changed by cation doping. The gap becomes arched in an ultrathin layer due to the space charge formed from metal-induced gap states. With an appropriate combination of an arched gap and a bias voltage, NDR can be produced in either spin channel. This mechanism is applicable to 2D and 3D ultrathin junctions with a sufficiently small band gap that forms a large space charge. It provides a new way of controlling the spin-dependent transport in spintronic devices by an electric field. A generalized Simmons formula for tunneling current through junction with an arched gap is derived to show the general conditions under which ultrathin junctions may exhibit NDR.

cond-mat.mtrl-sci

Spin-flip noise due to nonequilibrium spin accumulation

When current flows through a magnetic tunnel junction (MTJ), there is spin accumulation at the electrode-barrier interfaces if the magnetic moments of the two ferromagnetic electrodes are not aligned. Here we report that such nonequilibrium spin accumulation generates its own characteristic low frequency noise (LFN). Past work viewed the LFN in MTJs as an equilibrium effect arising from resistance fluctuations ($S_R$) which a passively applied current ($I$) converts to measurable voltage fluctuations ($S_{V}=I^{2}S_{R}$). We treat the LFN associated with spin accumulation as a nonequilibrium effect, and find that the noise power can be fitted in terms of the spin-polarized current by $S_{I}f=aI\coth(\frac{I}{b})-ab$, resembling the form of the shot noise for a tunnel junction, but with current now taking the role of the bias voltage, and spin-flip probability taking the role of tunneling probability.

cond-mat.mes-hall

Long range phase coherencein double barrier magnetic tunnel junctions with large thick metallic quantum well

Double barrier heterostructures are model systems for the study of electron tunneling and discrete energy levels in a quantum well (QW). Until now resonant tunneling phenomena in metallicQW have been observed for limited thicknesses (1-2 nm) under which electron phase coherence is conserved. In the present study we show evidence of QW resonance states in Fe QW up to12 nmthick and at room temperature in fully epitaxial doubleMgAlOxbarrier magnetic tunnel junctions. The electron phase coherence displayed in this QWis of unprecedented quality because ofa homogenous interface phase shift due to the small lattice mismatch at the Fe/MgAlOx interface. The physical understanding of the critical role of interface strain on QW phase coherence will greatly promote the development of the spin-dependent quantum resonant tunneling applications.

cond-mat.mes-hall

Observation of pure inverse spin Hall effect in ferromagnetic metals by FM/AFM exchange bias structures

We report that the spin current generated by spin Seebeck effect (SSE) in yttrium iron garnet (YIG) can be detected by a ferromagnetic metal (NiFe). By using the FM/AFM exchange bias structure (NiFe/IrMn), inverse spin Hall effect (ISHE) and planar Nernst effect (PNE) of NiFe can be unambiguously separated, allowing us to observe a pure ISHE signal. After eliminating the in plane temperature gradient in NiFe, we can even observe a pure ISHE signal without PNE from NiFe itself. It is worth noting that a large spin Hall angle (0.098) of NiFe is obtained, which is comparable with Pt. This work provides a kind of FM/AFM exchange bias structures to detect the spin current by charge signals, and highlights ISHE in ferromagnetic metals can be used in spintronic research and applications.

cond-mat.mtrl-sci

Giant Magneto-Seebeck Effect in Spin Valves

Giant magneto-Seebeck (GMS) effect was observed in Co/Cu/Co and NiFe/Cu/Co spin valves. Their Seebeck coefficients in parallel state was larger than that in antiparallel state, and GMS ratio defined as (SAP-SP)/SP could reach -9% in our case. The GMS originated not only from trivial giant magnetoresistance but also from spin current generated due to spin polarized thermoelectric conductivity in ferromagnetic materials and subsequent modulation of the spin current by spin configurations in spin valves. Simple Mott two-channel model reproduced a -11% GMS for the Co/Cu/Co spin valves, qualitatively consistent with our observations. The GMS effect could be applied simultaneously sensing temperature gradient and magnetic field and also be possibly applied to determine spin polarization of thermoelectric conductivity and Seebeck coefficient in ferromagnetic thin films.

cond-mat.mtrl-sci