arXiv subjects

X. Huang

Publications and source records attributed to X. Huang.

At least 55 records · Page 3Linked to original sources

arXiv2023

Observation of Directed Flow of Hypernuclei $^3_Λ$H and $^4_Λ$H in $\sqrt{s_{\rm NN}}$ = 3 GeV Au+Au Collisions at RHIC

We report here the first observation of directed flow ($v_1$) of the hypernuclei $^3_Λ$H and $^4_Λ$H in mid-central Au+Au collisions at $\sqrt{s_{\rm NN}}$ = 3 GeV at RHIC. These data are taken as part of the beam energy scan program carried out by the STAR experiment. From 165 $\times$ 10$^{6}$ events in 5%-40% centrality, about 8400 $^3_Λ$H and 5200 $^4_Λ$H candidates are reconstructed through two- and three-body decay channels. We observe that these hypernuclei exhibit significant directed flow. Comparing to that of light nuclei, it is found that the midrapidity $v_1$ slopes of $^3_Λ$H and $^4_Λ$H follow baryon number scaling, implying that the coalescence is the dominant mechanism for these hypernuclei production in such collisions.

nucl-ex↗

arXiv2023

Measurements of the elliptic and triangular azimuthal anisotropies in central $^{3}$He+Au, $d$+Au and $p$+Au collisions at $\mbox{$\sqrt{s_{\mathrm{NN}}}$}$ = 200 GeV

The elliptic ($v_2$) and triangular ($v_3$) azimuthal anisotropy coefficients in central $^{3}$He+Au, $d$+Au, and $p$+Au collisions at $\mbox{$\sqrt{s_{\mathrm{NN}}}$}$ = 200 GeV are measured as a function of transverse momentum ($p_{\mathrm{T}}$) at mid-rapidity ($|η|<$0.9), via the azimuthal angular correlation between two particles both at $|η|<$0.9. While the $v_2(p_{\mathrm{T}})$ values depend on the colliding systems, the $v_3(p_{\mathrm{T}})$ values are system-independent within the uncertainties, suggesting an influence on eccentricity from sub-nucleonic fluctuations in these small-sized systems. These results also provide stringent constraints for the hydrodynamic modeling of these systems.

nucl-ex↗

arXiv2023

Beam Energy Dependence of Triton Production and Yield Ratio ($\mathrm{N}_t \times \mathrm{N}_p/\mathrm{N}_d^2$) in Au+Au Collisions at RHIC

We report the triton ($t$) production in mid-rapidity ($|y| <$ 0.5) Au+Au collisions at $\sqrt{s_\mathrm{NN}}$= 7.7--200 GeV measured by the STAR experiment from the first phase of the beam energy scan at the Relativistic Heavy Ion Collider (RHIC). The nuclear compound yield ratio ($\mathrm{N}_t \times \mathrm{N}_p/\mathrm{N}_d^2$), which is predicted to be sensitive to the fluctuation of local neutron density, is observed to decrease monotonically with increasing charged-particle multiplicity ($dN_{ch}/dη$) and follows a scaling behavior. The $dN_{ch}/dη$ dependence of the yield ratio is compared to calculations from coalescence and thermal models. Enhancements in the yield ratios relative to the coalescence baseline are observed in the 0\%-10\% most central collisions at 19.6 and 27 GeV, with a significance of 2.3$σ$ and 3.4$σ$, respectively, giving a combined significance of 4.1$σ$. The enhancements are not observed in peripheral collisions or model calculations without critical fluctuation, and decreases with a smaller $p_{T}$ acceptance. The physics implications of these results on the QCD phase structure and the production mechanism of light nuclei in heavy-ion collisions are discussed.

nucl-ex↗

arXiv2023

Search for the Chiral Magnetic Effect in Au+Au collisions at $\sqrt{s_{_{\rm{NN}}}}=27$ GeV with the STAR forward Event Plane Detectors

A decisive experimental test of the Chiral Magnetic Effect (CME) is considered one of the major scientific goals at the Relativistic Heavy-Ion Collider (RHIC) towards understanding the nontrivial topological fluctuations of the Quantum Chromodynamics vacuum. In heavy-ion collisions, the CME is expected to result in a charge separation phenomenon across the reaction plane, whose strength could be strongly energy dependent. The previous CME searches have been focused on top RHIC energy collisions. In this Letter, we present a low energy search for the CME in Au+Au collisions at $\sqrt{s_{_{\rm{NN}}}}=27$ GeV. We measure elliptic flow scaled charge-dependent correlators relative to the event planes that are defined at both mid-rapidity $|η|<1.0$ and at forward rapidity $2.1 < |η|<5.1$. We compare the results based on the directed flow plane ($Ψ_1$) at forward rapidity and the elliptic flow plane ($Ψ_2$) at both central and forward rapidity. The CME scenario is expected to result in a larger correlation relative to $Ψ_1$ than to $Ψ_2$, while a flow driven background scenario would lead to a consistent result for both event planes. In 10-50\% centrality, results using three different event planes are found to be consistent within experimental uncertainties, suggesting a flow driven background scenario dominating the measurement. We obtain an upper limit on the deviation from a flow driven background scenario at the 95\% confidence level. This work opens up a possible road map towards future CME search with the high statistics data from the RHIC Beam Energy Scan Phase-II.

nucl-ex↗

arXiv2023

Measurement of sequential $Υ$ suppression in Au+Au collisions at $\sqrt{s_{_\mathrm{NN}}}$ = 200 GeV with the STAR experiment

We report on measurements of sequential $Υ$ suppression in Au+Au collisions at $\sqrt{s_{_\mathrm{NN}}}$ = 200 GeV with the STAR detector at the Relativistic Heavy Ion Collider (RHIC) through both the dielectron and dimuon decay channels. In the 0-60% centrality class, the nuclear modification factors ($R_{\mathrm{AA}}$), which quantify the level of yield suppression in heavy-ion collisions compared to $p$+$p$ collisions, for $Υ$(1S) and $Υ$(2S) are $0.40 \pm 0.03~\textrm{(stat.)} \pm 0.03~\textrm{(sys.)} \pm 0.09~\textrm{(norm.)}$ and $0.26 \pm 0.08~\textrm{(stat.)} \pm 0.02~\textrm{(sys.)} \pm 0.06~\textrm{(norm.)}$, respectively, while the upper limit of the $Υ$(3S) $R_{\mathrm{AA}}$ is 0.17 at a 95% confidence level. This provides experimental evidence that the $Υ$(3S) is significantly more suppressed than the $Υ$(1S) at RHIC. The level of suppression for $Υ$(1S) is comparable to that observed at the much higher collision energy at the Large Hadron Collider. These results point to the creation of a medium at RHIC whose temperature is sufficiently high to strongly suppress excited $Υ$ states.

nucl-ex↗

arXiv2023

Dilution induced magnetic localization in Rb(Co$_{1-x}$Ni$_{x}$)$_{2}$Se$_{2}$ single crystals

We report experimental studies on a series of Rb(Co$_{1-x}$Ni$_{x}$)$_{2}$Se$_{2}$ (0.02 $\leq x \leq $ 0.9) powder and single crystal samples using x-ray diffraction, neutron diffraction, magnetic susceptibility, and electronic transport measurements. All compositions are metallic and adopt the body-centered tetragonal structure with $I4/mmm$ space group. Anisotropic magnetic susceptibilities measured on single crystal samples suggest that Rb(Co$_{1-x}$Ni$_{x}$)$_{2}$Se$_{2}$ undergo an evolution from ferromagnetism to antiferromagnetism, and finally to paramagnetism with increasing Ni concentration. Neutron diffraction measurements on the samples with $x$ = 0.1, 0.4, and 0.6 reveal an $A$-type antiferromagnetic order with moments lying in the $ab$ plane. The moment size changes from 0.69 ($x=0.1$) to 2.80$μ_B$ ($x=0.6$) per Co ions. Our results demonstrate that dilution of the magnetic Co ions by substitution of nonmagnetic Ni ions induces magnetic localization and evolution from itinerant to localized magnetism in Rb(Co$_{1-x}$Ni$_{x}$)$_{2}$Se$_{2}$.

cond-mat.str-el↗

arXiv2023

Beam Energy Dependence of Fifth and Sixth-Order Net-proton Number Fluctuations in Au+Au Collisions at RHIC

We report the beam energy and collision centrality dependence of fifth and sixth order cumulants ($C_{5}$, $C_{6}$) and factorial cumulants ($κ_{5}$, $κ_{6}$) of net-proton and proton distributions, from $\sqrt{s_{NN}} = 3 - 200$ GeV Au+Au collisions at RHIC. The net-proton cumulant ratios generally follow the hierarchy expected from QCD thermodynamics, except for the case of collisions at $\sqrt{s_{NN}}$ = 3 GeV. $C_{6}/C_{2}$ for 0-40\% centrality collisions is increasingly negative with decreasing $\sqrt{s_{NN}}$, while it is positive for the lowest $\sqrt{s_{NN}}$ studied. These observed negative signs are consistent with QCD calculations (at baryon chemical potential, $μ_{B} \leq$ 110 MeV) that include a crossover quark-hadron transition. In addition, for $\sqrt{s_{NN}} \geq$ 11.5 GeV, the measured proton $κ_{n}$, within uncertainties, does not support the two-component shape of proton distributions that would be expected from a first-order phase transition. Taken in combination, the hyper-order proton number fluctuations suggest that the structure of QCD matter at high baryon density, $μ_{B}\sim 750$ MeV ($\sqrt{s_{NN}}$ = 3 GeV) is starkly different from those at vanishing $μ_{B}\sim 20$MeV ($\sqrt{s_{NN}}$ = 200 GeV and higher).

nucl-ex↗

arXiv2023

Beam energy dependence of the linear and mode-coupled flow harmonics in Au+Au collisions

The linear and mode-coupled contributions to higher-order anisotropic flow are presented for Au+Au collisions at $\sqrt{s_{\mathrm{NN}}}$ = 27, 39, 54.4, and 200 GeV and compared to similar measurements for Pb+Pb collisions at the Large Hadron Collider (LHC). The coefficients and the flow harmonics' correlations, which characterize the linear and mode-coupled response to the lower-order anisotropies, indicate a beam energy dependence consistent with an influence from the specific shear viscosity ($η/s$). In contrast, the dimensionless coefficients, mode-coupled response coefficients, and normalized symmetric cumulants are approximately beam-energy independent, consistent with a significant role from initial-state effects. These measurements could provide unique supplemental constraints to (i) distinguish between different initial-state models and (ii) delineate the temperature ($T$) and baryon chemical potential ($μ_{B}$) dependence of the specific shear viscosity $\fracη{s} (T, μ_B)$.

nucl-ex↗

arXiv2023

GBT20, a 20.48 Gbps PAM4 Optical Transmitter Module for Particle Physics Experiments

We present a pluggable radiation-tolerant 4-level Pulse-Amplitude-Modulation (PAM4) optical transmitter module called GBT20 (Giga-Bit Transmitter at 20 Gbps) for particle-physics experiments. GBT20 has an OSFP or firefly connector to input 16-bit data each at 1.28 Gbps. The GBT20 drives a VCSEL die with an LC lens or a VCSEL TOSA and interfaces an optical fiber with a standard LC connector. The minimum module, including the host connector, occupies 41 mm x 13 mm x 6 mm. At 20.48 Gbps, the minimum Transmitter Dispersion Eye Closure Quaternary (TDECQ) is around 0.7 dB. The power consumption is around 164 mW in the low-power mode. The SEE cross-section is below 7.5x10^(-14) cm^2. No significant performance degrades after a TID of 5.4 kGy.

physics.ins-det↗

arXiv2023

Pion, kaon, and (anti-)proton production in U+U Collisions at $\sqrt{s_{NN}}$ = 193 GeV measured with the STAR detector

We present the first measurements of transverse momentum spectra of $π^{\pm}$, $K^{\pm}$, $p(\bar{p})$ at midrapidity ($|y| < 0.1$) in U+U collisions at $\sqrt{s_{NN}}$ = 193 GeV with the STAR detector at the Relativistic Heavy Ion Collider (RHIC). The centrality dependence of particle yields, average transverse momenta, particle ratios and kinetic freeze-out parameters are discussed. The results are compared with the published results from Au+Au collisions at $\sqrt{s_{NN}} =$ 200 GeV in STAR. The results are also compared to those from A Multi Phase Transport (AMPT) model.

nucl-ex↗

arXiv2023

An FPGA-based readout chip emulator for the CMS ETL detector upgrade

We present an FPGA-based readout chip emulator board for the CMS Endcap Timing Layer (ETL) detector upgrade. The emulator board uses an Intel Cyclone 10 GX FPGA to emulate the digital functions of four Endcap Layer Readout Chips (ETROCs). Based on the actual ETROC design, the firmware is implemented and verified. The emulator board is being used for the ETROC digital design verification and system development.

physics.ins-det↗

arXiv2023

The design and test results of A Giga-Bit Cable Receiver (GBCR) for the ATLAS Inner Tracker Pixel Detector

This paper presents the design and test results of a Gigabit Cable Receiver ASIC called GBCR for the HL-LHC upgrade of the ATLAS Inner Tracker (ITk) pixel detector. Three prototypes (GBCR1, GBCR2, and GBCR3) have been designed in the CERN-identified 65 nm CMOS technology. GBCR receives seven (GBCR2) or six (GBCR3) channels (RX) each at 1.28 Gbps from the front-end readout chip RD53B via flex cables up to 1 meter and Twinax cables up to 5 meters and sends the equalized and retimed signals to lpGBT. Both GBCR2 and GBCR3 ASICs have two transmitting channels (TX) that pre-emphasize the signals from lpGBT before sending them to RD53B through the same cables. No Single-Event Upset (SEU) is observed in any tested channels of GBCR2 in a 400 MeV proton beam. The extrapolated bit error rate for the future HL-LHC application is below 8*10^(-16), significantly below the specified BER criterion. GBCR3 is designed to improve the immunity to single-event-upset by applying the Triple Modular Redundancy (TMR) technology to all RX channels. The retimed signals from GBCR3 have less total jitter than those from GBCR2 (35 ps versus 79 ps). Each receiver channel of GBCR3 consumes 75% more power than that of GBCR2.

physics.ins-det↗

arXiv2023

A High-resolution Clock Phase Shifter Circuitry for ALTIROC

A high-resolution clock phase shifter is implemented to adjust the phase of multiple clocks at 40 MHz, 80 MHz, or 640 MHz in the ALTIROC chip. The phase shifter has a coarse-phase shifter and a fine-phase shifter to achieve a step size of 97.7 ps and an adjustable range of 25 ns. The fine delay unit is based on a Delay Locked Loop (DLL) operating at 640 MHz. The phase shifter is fabricated in a 130 nm CMOS process. The area of the phase shifter is 725 um x 248 um. The Differential Non-Linearity (DNL) and the Integral Non-Linearity (INL) are +/-0.6 LSB and +/-0.75 LSB, respectively. The jitter from -25 C to 20 C is less than 15.5 ps (RMS), including the contributions from the FPGA clock source and the PLL. The power consumption is 11.2 mW.

physics.ins-det↗

arXiv2022

Characterizing Compact 15-33 GHz Radio Continuum Sources in Local U/LIRGs

We present the analysis of $\sim 100$pc-scale compact radio continuum sources detected in 63 local (Ultra) Luminous Infrared Galaxies (U/LIRGs; $L_{\rm IR} \ge 10^{11} L_\odot$), using FWHM $\lesssim 0''.1 - 0''.2$ resolution 15 and 33 GHz observations with the Karl G. Jansky Very Large Array. We identify a total of 133 compact radio sources with effective radii of 8 - 170pc, which are classified into four main categories -- "AGN" (AGN), "AGN/SBnuc" (AGN-starburst composite nucleus), "SBnuc" (starburst nucleus) and "SF" (star-forming clumps) -- based on ancillary datasets and the literature. We find that "AGN" and "AGN/SBnuc" more frequently occur in late-stage mergers and have up to 3 dex higher 33 GHz luminosities and surface densities compared with "SBnuc" and "SF", which may be attributed to extreme nuclear starburst and/or AGN activity in the former. Star formation rates (SFRs) and surface densities ($Σ_{\rm SFR}$) are measured for "SF" and "SBnuc" using both the total 33 GHz continuum emission (SFR $\sim 0.14 - 13$ M$_\odot$ yr$^{-1}$, $Σ_{\rm SFR} \sim 13 - 1600$ M$_\odot$ yr$^{-1}$ kpc$^{-2}$) and the thermal free-free emission from HII regions (median SFR$_{\rm th} \sim 0.4$ M$_\odot$ yr$^{-1}$, $Σ_{\rm SFR_{th}} \sim 44$ M$_\odot$ yr$^{-1}$ kpc$^{-2}$). These values are 1 - 2 dex higher than those measured for similar-sized clumps in nearby normal (non-U/LIRGs). The latter also have much flatter median 15 - 33 GHz spectral index ($\sim -0.08$) compared with "SBnuc" and "SF" ($\sim -0.46$), which may reflect higher non-thermal contribution from supernovae and/or ISM densities in local U/LIRGs that directly result from and/or lead to their extreme star-forming activities on 100\,pc scales.

astro-ph.GA↗

arXiv2022

Defects Evolution and Mg Segregation in Mg-implanted GaN with Ultra-High-Pressure Annealing

Annealing Mg-implanted homoepitaxial GaN at temperatures at or above 1400 °C eliminates the formation of inversion domains and leads to improved dopant activation efficiency. Extended defects in the form of inversion domains contain electrically inactive Mg after post-implantation annealing at temperatures as high as 1300 °C (one GPa N2 overpressure), which results in a low dopant activation efficiency. Triple axis X-ray data show that the implant-induced strain is fully relieved after annealing at 1300 °C for 10 min, indicating that the strain-inducing point defects formed during implantation have reconfigured. However, annealing at temperatures of 1400 °C to 1500 °C (also one GPa N2 overpressure) eliminates the presence of the inversion domains. Annealing at these higher temperatures and for a longer time does not have any further impact on the strain state. While residual defects, such as dislocation loops, still exist after annealing at and above 1400 °C, chemical analysis at the dislocation loops shows no sign of Mg segregation. Meanwhile, an overall decreasing trend in the dislocation loop size and density is observed after annealing at higher temperatures and longer times. Earlier work [1] addressing electrical measurements of these types of samples showed that annealing at 1400 °C leads to a dopant activation efficiency that is an order of magnitude higher than that observed at 1300 °C. This work complements the earlier work by identifying the microscopic defects (inversion domains) which incorporate Mg, and points to the benefits, in terms of defect density and p-type dopant activation, of using higher temperatures annealing cycles to activate Mg in GaN.

cond-mat.mtrl-sci↗

arXiv2022

Accelerator and Beam Physics: Grand Challenges and Research Opportunities

Accelerator and beam physics (ABP) is the science of the motion, generation, acceleration, manipulation, prediction, observation and use of charged particle beams. It focuses on fundamental long-term accelerator and beam physics research and development. Accelerator and beam physics research has resulted in important advances in accelerator science, yet support for this research is declining. NSF has terminated its program in accelerator Science and funding by DOE through GARD and Accelerator Stewardship has been steady or declining. The declining support for accelerator research will slow advances and threaten student training and work-force development in accelerator science. We propose a robust and scientifically challenging program in accelerator and beam physics, which will position the field of US High Energy Physics to be productive and competitive for decades to come.

physics.acc-ph↗

arXiv2022

A 40 Gbps Optical Transceiver for Particle Physics Experiments

We present the design and the test results of a quad-channel optical transceiver module (QTRx) possibly for future particle physics experiments. The transmitters of QTRx, each at 10 Gbps, are based on a Quad-channel VCSEL Diode array Driver (QLDD) and 1 x 4 VCSEL array. The receivers of QTRx, with data rates of 2.56 Gbps or 10 Gbps per channel, are based on a Quad-channel Trans-Impedance and limiting Amplifier (QTIA) and 1 x 4 photodiode array of GaAs or InGaAs. QTRx is 20 mm x 10 mm x 5 mm and couples to an MT fiber connector. Test results indicate that QTRx achieves the design goals with a power consumption of 124 mW per transmitter channel at 10 Gbps and 120 mW at 2.56 Gbps for the receiver channel with an on-chip charge pump. The sensitivities of QTIA are -17 dBm at 2.56 Gbps and -8 dBm at 10 Gbps, respectively. Further improvements with a gold-finger interface and a more compact optical lens are being designed.

physics.ins-det↗

arXiv2022

A prototype optical link board with redundancy design for the ATLAS liquid argon calorimeter Phase-2 upgrade

A prototype optical-link board has been developed for the ATLAS Liquid Argon Calorimeter Phase-2 upgrade. The board consists of 24 lpGBT chips and 8 VTRx+ modules and demonstrates the full optical link design of the future front-end board. The board has 22 simplex optical links to transmit detector data, which are emulated in FPGAs and injected through 6 FMC connectors, to the off-detector electronics. The board implements 2 duplex optical links for clocks, control, and monitoring with redundant design to improve the system reliability. Data transmission and all redundant designs have been verified. A fiber routing scheme, in which 2 or 3 VTRx+ modules are re-connected to the front panel with an MPO connector, has been prototyped.

physics.ins-det↗