arXiv subjects

X. J. Zhu

Publications and source records attributed to X. J. Zhu.

7 recordsLinked to original sources

arXiv2021

On the evidence for a common-spectrum process in the search for the nanohertz gravitational-wave background with the Parkes Pulsar Timing Array

A nanohertz-frequency stochastic gravitational-wave background can potentially be detected through the precise timing of an array of millisecond pulsars. This background produces low-frequency noise in the pulse arrival times that would have a characteristic spectrum common to all pulsars and a well-defined spatial correlation. Recently the North American Nanohertz Observatory for Gravitational Waves collaboration (NANOGrav) found evidence for the common-spectrum component in their 12.5-year data set. Here we report on a search for the background using the second data release of the Parkes Pulsar Timing Array. If we are forced to choose between the two NANOGrav models $\unicode{x2014}$ one with a common-spectrum process and one without $\unicode{x2014}$ we find strong support for the common-spectrum process. However, in this paper, we consider the possibility that the analysis suffers from model misspecification. In particular, we present simulated data sets that contain noise with distinctive spectra but show strong evidence for a common-spectrum process under the standard assumptions. The Parkes data show no significant evidence for, or against, the spatially correlated Hellings-Downs signature of the gravitational-wave background. Assuming we did observe the process underlying the spatially uncorrelated component of the background, we infer its amplitude to be $A = 2.2^{+0.4}_{-0.3} \times 10^{-15}$ in units of gravitational-wave strain at a frequency of $1\, \text{yr}^{-1}$. Extensions and combinations of existing and new data sets will improve the prospects of identifying spatial correlations that are necessary to claim a detection of the gravitational-wave background.

astro-ph.HE↗

arXiv2021

The Parkes pulsar timing array second data release: Timing analysis

The main goal of pulsar timing array experiments is to detect correlated signals such as nanohertz-frequency gravitational waves. Pulsar timing data collected in dense monitoring campaigns can also be used to study the stars themselves, their binary companions, and the intervening ionised interstellar medium. Timing observations are extraordinarily sensitive to changes in path length between the pulsar and the Earth, enabling precise measurements of the pulsar positions, distances and velocities, and the shapes of their orbits. Here we present a timing analysis of 25 pulsars observed as part of the Parkes Pulsar Timing Array (PPTA) project over time spans of up to 24 yr. The data are from the second data release of the PPTA, which we have extended by including legacy data. We make the first detection of Shapiro delay in four Southern pulsars (PSRs J1017$-$7156, J1125$-$6014, J1545$-$4550, and J1732$-$5049), and of parallax in six pulsars. The prominent Shapiro delay of PSR J1125$-$6014 implies a neutron star mass of $M_p = 1.5 \pm 0.2 M_\odot$ (68% credibility interval). Measurements of both Shapiro delay and relativistic periastron advance in PSR J1600$-$3053 yield a large but uncertain pulsar mass of $M_p = 2.06^{+0.44}_{-0.41}$ M$_\odot$ (68% credibility interval). We measure the distance to PSR J1909$-$3744 to a precision of 10 lyr, indicating that for gravitational wave periods over a decade, the pulsar provides a coherent baseline for pulsar timing array experiments.

astro-ph.HE↗

arXiv2019

A pulsar-based timescale from the International Pulsar Timing Array

We have constructed a new timescale, TT(IPTA16), based on observations of radio pulsars presented in the first data release from the International Pulsar Timing Array (IPTA). We used two analysis techniques with independent estimates of the noise models for the pulsar observations and different algorithms for obtaining the pulsar timescale. The two analyses agree within the estimated uncertainties and both agree with TT(BIPM17), a post-corrected timescale produced by the Bureau International des Poids et Mesures (BIPM). We show that both methods could detect significant errors in TT(BIPM17) if they were present. We estimate the stability of the atomic clocks from which TT(BIPM17) is derived using observations of four rubidium fountain clocks at the US Naval Observatory. Comparing the power spectrum of TT(IPTA16) with that of these fountain clocks suggests that pulsar-based timescales are unlikely to contribute to the stability of the best timescales over the next decade, but they will remain a valuable independent check on atomic timescales. We also find that the stability of the pulsar-based timescale is likely to be limited by our knowledge of solar-system dynamics, and that errors in TT(BIPM17) will not be a limiting factor for the primary goal of the IPTA, which is to search for the signatures of nano-Hertz gravitational waves.

astro-ph.IM↗

arXiv2019

The International Pulsar Timing Array: Second data release

In this paper, we describe the International Pulsar Timing Array second data release, which includes recent pulsar timing data obtained by three regional consortia: the European Pulsar Timing Array, the North American Nanohertz Observatory for Gravitational Waves, and the Parkes Pulsar Timing Array. We analyse and where possible combine high-precision timing data for 65 millisecond pulsars which are regularly observed by these groups. A basic noise analysis, including the processes which are both correlated and uncorrelated in time, provides noise models and timing ephemerides for the pulsars. We find that the timing precisions of pulsars are generally improved compared to the previous data release, mainly due to the addition of new data in the combination. The main purpose of this work is to create the most up-to-date IPTA data release. These data are publicly available for searches for low-frequency gravitational waves and other pulsar science.

astro-ph.HE↗

arXiv2018

Studying the solar system with the International Pulsar Timing Array

Pulsar-timing analyses are sensitive to errors in the solar-system ephemerides (SSEs) that timing models utilise to estimate the location of the solar-system barycentre, the quasi-inertial reference frame to which all recorded pulse times-of-arrival are referred. Any error in the SSE will affect all pulsars, therefore pulsar timing arrays (PTAs) are a suitable tool to search for such errors and impose independent constraints on relevant physical parameters. We employ the first data release of the International Pulsar Timing Array to constrain the masses of the planet-moons systems and to search for possible unmodelled objects (UMOs) in the solar system. We employ ten SSEs from two independent research groups, derive and compare mass constraints of planetary systems, and derive the first PTA mass constraints on asteroid-belt objects. Constraints on planetary-system masses have been improved by factors of up to 20 from the previous relevant study using the same assumptions, with the mass of the Jovian system measured at 9.5479189(3)$\times10^{-4}$ $M_{\odot}$. The mass of the dwarf planet Ceres is measured at 4.7(4)$\times10^{-10}$ $M_{\odot}$. We also present the first sensitivity curves using real data that place generic limits on the masses of UMOs, which can also be used as upper limits on the mass of putative exotic objects. For example, upper limits on dark-matter clumps are comparable to published limits using independent methods. While the constraints on planetary masses derived with all employed SSEs are consistent, we note and discuss differences in the associated timing residuals and UMO sensitivity curves.

astro-ph.EP↗

arXiv2015

Pulsar Observations of Extreme Scattering Events

Extreme scattering events (ESEs) in the interstellar medium (ISM) were first observed in regular flux measurements of compact extragalactic sources. They are characterized by a flux variation over a period of weeks, suggesting the passage of a "diverging plasma lens" across the line of sight. Modeling the refraction of such a lens indicates that the structure size must be of order AU and the electron density of order 10s of cm^{-3}. Similar structures have been observed in measurements of pulsar intensity scintillation and group delay. Here we report observations of two ESEs showing increases in both intensity scintillation and dispersion made with the Parkes Pulsar Timing Array (PPTA). These allow us to make more complete models of the ESE, including an estimate of the "outer-scale" of the turbulence in the plasma lens. These observations show clearly that the ESE structure is fully turbulent on an AU scale. They provide some support for the idea that the structures are extended along the line of sight, such as would be the case for a scattering shell. The dispersion measurements also show a variety of AU scale structures which would not be called ESEs, yet involve electron density variations typical of ESEs and likely have the same origin.

astro-ph.SR↗

arXiv2014

Searching for gravitational wave memory bursts with the Parkes Pulsar Timing Array

Anisotropic bursts of gravitational radiation produced by events such as super-massive black hole mergers leave permanent imprints on space. Such gravitational wave "memory" (GWM) signals are, in principle, detectable through pulsar timing as sudden changes in the apparent pulse frequency of a pulsar. If an array of pulsars is monitored as a GWM signal passes over the Earth, the pulsars would simultaneously appear to change pulse frequency by an amount that varies with their sky position in a quadrupolar fashion. Here we describe a search algorithm for such events and apply the algorithm to approximately six years of data from the Parkes Pulsar Timing Array. We find no GWM events and set an upper bound on the rate for events which could have been detected. We show, using simple models of black hole coalescence rates, that this non-detection is not unexpected.

astro-ph.GA↗