arXiv subjects

X. Zhang

Publications and source records attributed to X. Zhang.

At least 91 records · Page 5Linked to original sources

arXiv2024

Bright unintended electromagnetic radiation from second-generation Starlink satellites

We report on the detection of unintended electromagnetic radiation (UEMR) from the second-generation of Starlink satellites. Observations with the LOFAR radio telescope between 10 to 88MHz and 110 to 188MHz show broadband emission covering the frequency ranges from 40 to 70MHz and 110 to 188MHz from the v2-Mini and v2-Mini Direct-to-Cell Starlink satellites. The spectral power flux density of this broadband UEMR varies from satellite to satellite, with values ranging from 15Jy to 1300Jy, between 56 and 66MHz, and from 2 to 100Jy over two distinct 8MHz frequency ranges centered at 120 and 161MHz. We compared the detected power flux densities of this UEMR to that emitted by the first generation v1.0 and v1.5 Starlink satellites. When correcting for the observed satellite distances, we find that the second-generation satellites emit UEMR that is up to a factor of 32 stronger compared to the first generation. The calculated electric field strengths of the detected UEMR exceed typical electromagnetic compatibility standards used for commercial electronic devices as well as recommended emission thresholds from the Radiocommunication Sector of the International Telecommunications Union (ITU-R) aimed at protecting the 150.05-153MHz frequency range allocated to radio astronomy. We characterize the properties of the detected UEMR with the aim of assisting the satellite operator with the identification of the cause of the UEMR.

astro-ph.IM↗

arXiv2024

The SRG/eROSITA all-sky survey. X-ray emission from the warm-hot phase gas in long cosmic filaments

The properties of the warm-hot intergalactic medium (WHIM) in cosmic filaments are among the least quantified units in modern astrophysics. The Spectrum Roentgen Gamma/eROSITA All Sky Survey ((SRG/eRASS) provides a unique opportunity to study the X-ray emission of the WHIM. We applied both imaging and spectroscopic stacking techniques to the data of the first four eRASS scans to inspect the X-ray emissions from 7817 cosmic filaments identified from Sloan Digital Sky Survey (SDSS) optical galaxy samples. We obtained a $9σ$ significant detection of the total X-ray signal from filaments in the 0.3--1.2~keV band. Here, we introduce a novel method to estimate the contamination fraction from unmasked X-ray halos, active galactic nuclei, and X-ray binaries associated with filament galaxies. We found an approximately 40\% contamination fraction for these unmasked sources, suggesting that the remaining 60\% of the signal could be coming from the WHIM and a $5.4σ$ detection significance of the WHIM. Moreover, we modeled the temperature and baryon density contrast of the detected WHIM by fitting the stacked spectrum and surface brightness profile. The best-fit temperature $\log(T/\mathrm{K})=6.84\pm0.07$, obtained by using a single temperature model, is marginally higher than in the simulation results. This could be due to the fitting of a single temperature model on a multi-temperature spectrum. Assuming a 0.2 solar abundance, the best-fit baryon density contrast $\logΔ_\mathrm{b}=1.88\pm0.18$ is in general agreement with the X-ray emitting phases in the IllustrisTNG simulation. This result suggests that the broadband X-ray emission traces the high end of the temperature and density values that characterize the entire WHIM population.

astro-ph.HE↗

arXiv2024

The SRG/eROSITA All-Sky Survey. Optical identification and properties of galaxy clusters and groups in the western galactic hemisphere

The first SRG/eROSITA All-Sky Survey (eRASS1) provides the largest intracluster medium-selected galaxy cluster and group catalog covering the western galactic hemisphere. Compared to samples selected purely on X-ray extent, the sample purity can be enhanced by identifying cluster candidates using optical and near-infrared data from the DESI Legacy Imaging Surveys. Using the red-sequence-based cluster finder eROMaPPer, we measured individual photometric properties (redshift $z_λ$, richness $λ$, optical center, and BCG position) for 12,000 eRASS1 clusters over a sky area of 13,116 deg$^2$, augmented by 247 cases identified by matching the candidates with known clusters from the literature. The median redshift of the identified eRASS1 sample is $z=0.31$, with 10% of the clusters at $z>0.72$. The photometric redshifts have an accuracy of $δz/(1+z)<0.005$ for $0.05 95% for $z>0.05$. For these and further quality assessments of the eRASS1 identified catalog, we applied our identification method to a collection of galaxy cluster catalogs in the literature, as well as blindly on the full Legacy Surveys covering 24,069 deg$^2$. Using a combination of these cluster samples, we investigated the velocity dispersion-richness relation, finding $\log(λ)=2.401\times\log(σ)-5.074$ with an intrinsic scatter of $0.10\pm0.01$ dex. Our main result is the identified eRASS1 cluster catalog with a high purity and a well-defined X-ray selection process, enabling precise cosmological analyses presented in companion papers.

astro-ph.CO↗

arXiv2024

Cosmic dance in the Shapley Concentration Core II. The uGMRT-MeerKAT view of filaments in the brightest cluster galaxies and tailed radio galaxies in the A3528 cluster complex

Superclusters are the largest-scale environments where a number of galaxy clusters interact with each other through minor/major mergers and grow via accretion along cosmic filaments. We focus on the A3528 complex in the core of the Shapley Supercluster. This system includes three clusters, A3528 (composed itself by two sub-clusters, namely A3528N and A3528S), A3532 and A3530, and presents a mildly active dynamical state. We study how minor mergers affect the evolution of radio galaxies and whether they are able to re-accelerate relativistic electrons in the ICM. We used observations from the uGMRT (Band 3, 4 and 5) and MeerKAT (L-band) telescopes to obtain images and spectral index maps over a wide frequency band and spatial resolutions. We compare these data with those from the SRG/eROSITA X-ray telescope. We detect faint diffuse radio emission associated with the radio galaxies. The BCGs in A3528S and A3532 show filaments of diffuse radio emission which extend for $\sim200-400$ kpc out of the radio galaxy. The spectral index of these filaments is extremely steep and almost constant ($α\sim -2, -2.5$). Contrary to the radio tails in A3528N, the spectral properties of these radio filaments are not consistent with standard models of plasma ageing. We also detect roundish diffuse radio emission around the BCG in A3528S which could be classified as a radio mini-halo. The radio tail in this cluster appears longer that in earlier detections, being $\sim300$ kpc long at all frequencies. We linked the presence of extended radio emission in the form of filaments and threads in the A3528 complex with the effect of minor mergers. This is reinforced by the increasing X-ray fluctuations in correspondence with the radio extended emission in A3528S. Despite the less energy involved, our findings support the hypothesis that these events can re-energise plasma originating from radio galaxies.

astro-ph.CO↗

arXiv2024

Application of the Scrape-Off-Layer Fast Ion (SOLFI) code to assess particle motion in mirrors and tokamaks

This paper introduces the Scrape-Off-Layer Fast Ion (SOLFI) code, which is a new and versatile full-orbit Monte Carlo particle tracer developed to follow fast ion orbits inside and outside the separatrix in tokamaks. SOLFI is benchmarked in a simple straight mirror geometry, showing that the code conserves particle energy and magnetic moment, obtains the correct passing boundary for particles moving in the magnetic mirror field with an imposed electrostatic field, and correctly observes equal ion and electron current at the ambipolar potential predicted from analytical theory. This result has consequences for collisionless scrape-off-layers in spherical tokamaks. We then utilize SOLFI for fundamental physics studies in novel tokamak geometries, exploring the effect of shaping on the trapped particle fraction and bounce locations in tokamaks and demonstrating that negative triangularity can be used to maximize the fraction of particles bouncing in the good-curvature region, potentially leading to enhanced confinement.

physics.plasm-ph↗

arXiv2024

Giant interfacial Dzyaloshinskii-Moriya Interaction in perovskite La_{0.7}Sr_{0.3}MnO_{3} films

The Dzyaloshinskii-Moriya interaction (DMI) plays a critical role in stabilizing topological spin textures, a key area of growing interest in oxide-based spintronics. While most of reported topological phenomena found in manganites are related to the bulk-like DMI, the understanding of interfacial DMI and its origin in oxide interfaces remain limited. Here we experimentally investigate the interfacial DMI of La_{0.7}Sr_{0.3}MnO_{3} (LSMO) films grown on various substrates by employing spin-wave propagation with drift velocities at room temperature. Our findings reveal a giant interfacial DMI coefficient (\mathit{D} _{s}) of 1.96 pJ/m in LSMO/NdGaO_{3}(110) system, exceeding previously reported values in oxides by one to two orders of magnitude. First-principles calculations further show that with the aid of 6\mathit{s} electrons, the 4\mathit{f} electrons from Nd play a key role in enhancing the spin-orbit coupling of the 3\mathit{d} electrons in Mn, ultimately leading to the observed giant interfacial DMI. This discovery of giant interfacial DMI through engineering the interface of oxides provides valuable insights for advancing functional chiral magnonics and spintronics.

cond-mat.mtrl-sci↗

arXiv2024

Exotic thermoelectric properties of coronene-cyclobutadienoid graphene nanoribbons

Thermoelectric materials traditionally incorporate heavy metals to achieve low lattice thermal conductivity. However, elements such as Te, Bi, and Pb are costly and pose environmental hazards. In this study, we introduce a novel design strategy for thermoelectric materials, focusing on room-temperature, light-element, and high-ZT materials such as coronene-cyclobutadienoid graphene nanoribbons (cor4GNRs). This material demonstrates a ZT value exceeding 2.1, attributed to its exceptionally low phonon thermal conductivity resulting from its unique edge structure. Importantly, its electrical conductance and Seebeck coefficient remain relatively high and nearly unaffected by the edge structure. This distinct behavior in phonon and electronic transport properties leads to a remarkably high ZT value. Additionally, we discover that applying strain can significantly reduce phonon thermal conductivity, potentially increasing the ZT value to over 3.0. Our findings provide innovative insights for the design and application of advanced thermoelectric materials.

cond-mat.mtrl-sci↗

arXiv2024

The SRG/eROSITA all-sky survey: Cosmology constraints from cluster abundances in the western Galactic hemisphere

The cluster mass function traces the growth of linear density perturbations and provides valuable insights into the growth of structures, the nature of dark matter, and the cosmological parameters governing the Universe. The primary science goal of eROSITA, on board the {\it Spectrum Roentgen Gamma (SRG)} mission, launched in 2019, is to constrain cosmology through the evolution of cluster mass function. In this paper, we present the cosmological constraints obtained from 5259 clusters of galaxies detected over an area of 12791~deg$^2$ in the Western Galactic Hemisphere of the eROSITA's first All-Sky Survey (eRASS1). The common footprint region between the eROSITA Survey and DES, KiDS, and HSC surveys is used for calibration of the scaling between X-ray count rate and their total mass through measurements of their weak gravitational lensing signal. eRASS1 cluster abundances constrain the $Λ$CDM parameters, which are the energy density of the total matter to $Ω_{\mathrm{m}}=0.29^{+0.01}_{-0.02}$, and the normalization of the density fluctuations to $σ_8=0.88\pm0.02$ and their combination yields $S_8=σ_8 (Ω_\mathrm{m} / 0.3)^{0.5}=0.86\pm0.01$, consistent and at a similar precision with the state-of-the-art CMB measurements. eRASS1 cosmological experiment places a most stringent upper limit on the summed masses of left-handed light neutrinos to $\sum m_ν< 0.22\mathrm{~eV}$ (95\% confidence interval). Combining eRASS1 cluster abundance measurements with CMB and ground-based neutrino oscillation experiments, we measure the summed neutrino masses to be $\sum m_ν=0.08_{-0.02}^{+0.03}\mathrm{~eV}$ or $\sum m_ν=0.12_{-0.01}^{+0.03}\mathrm{~eV}$ depending on the mass hierarchy scenario for neutrino eigenstates. eRASS1 cluster abundances significantly improve the constraints on the dark energy equation of state parameter to $w=-1.12\pm0.12$. (ABRIDGED)

astro-ph.CO↗

arXiv2024

A Benchmark JWST Near-Infrared Spectrum for the Exoplanet WASP-39b

Observing exoplanets through transmission spectroscopy supplies detailed information on their atmospheric composition, physics, and chemistry. Prior to JWST, these observations were limited to a narrow wavelength range across the near-ultraviolet to near-infrared, alongside broadband photometry at longer wavelengths. To understand more complex properties of exoplanet atmospheres, improved wavelength coverage and resolution are necessary to robustly quantify the influence of a broader range of absorbing molecular species. Here we present a combined analysis of JWST transmission spectroscopy across four different instrumental modes spanning 0.5-5.2 micron using Early Release Science observations of the Saturn-mass exoplanet WASP-39b. Our uniform analysis constrains the orbital and stellar parameters within sub-percent precision, including matching the precision obtained by the most precise asteroseismology measurements of stellar density to-date, and further confirms the presence of Na, K, H$_2$O, CO, CO$_2$, and SO$_2$ atmospheric absorbers. Through this process, we also improve the agreement between the transmission spectra of all modes, except for the NIRSpec PRISM, which is affected by partial saturation of the detector. This work provides strong evidence that uniform light curve analysis is an important aspect to ensuring reliability when comparing the high-precision transmission spectra provided by JWST.

astro-ph.EP↗

arXiv2024

Nontrivial impact of interlayer coupling on thermal conductivity: opposing trends in in-plane and out-of-plane phonons

The study of heat transport in two-dimensional (2D) materials reveals novel behaviors due to quantum confinement effects, where in-plane and out-of-plane phonons play crucial roles. In 2D materials like graphene, it is widely recognized that the out-of-plane vibrational mode is the primary contributor to thermal conductivity owing to the mirror symmetry. Based on this perspective, the introduction of interlayer coupling, which breaks this symmetry, is expected to induce a significant reduction in thermal conductivity within 2D materials. Nevertheless, recent studies have presented unexpected findings, indicating that interlayer coupling can actually increase thermal conductivity of 2D materials. This controversial result suggests a nontrivial underlying mechanism governing the effects of interlayer coupling on thermal conductivity in 2D materials, necessitating further exploration. In our work, we investigate the modulation of thermal conductivity through interlayer coupling in a sandwich structure composed of hexagonal boron nitride (h-BN) and bilayer graphene (BG), specifically a h- BN/BG/h-BN system. Through molecular dynamics simulations, we find that the thermal conductivity from out-of-plane phonons can be significantly reduced, while that from in-plane phonons can be significantly increased, as the interlayer coupling strength increases. This results in a nontrivial, coupling-strength-dependent overall thermal conductivity. The phonon spectrum analysis conducted using our modified package reveals that the upshift and flattening of the out-of-plane (ZA and ZO) phonon modes are mainly responsible for these variations, and the extent of the upshift and flattening is proportional to the strength of interlayer coupling. This work offers new insights into manipulating the thermal conductivity of 2D materials.

cond-mat.mes-hall↗

arXiv2024

Decay Energy Spectrometry for Improved Nuclear Material Analysis at the IAEA NML

Decay energy spectrometry (DES) is a novel radiometric technique for high-precision analysis of nuclear materials. DES employs the unique thermal detection physics of cryogenic microcalorimeters with ultra-high energy resolution and 100$\%$ detection efficiency to accomplish high precision decay energy measurements. Low-activity nuclear samples of 1 Bq or less, and without chemical separation, are used to provide elemental and isotopic compositions in a single measurement. Isotopic ratio precisions of 1 ppm - 1,000 ppm (isotope dependent), which is close to that of the mass spectrometry, have been demonstrated in 12-hour DES measurements of ~5 Bq samples of certified reference materials of uranium (U) and plutonium (Pu). DES has very different systematic biases and uncertainties, as well as different sensitivities to nuclides, compared to mass-spectrometry techniques. Therefore, the accuracy and confidence of nuclear material assays can be improved by combining this new technique with existing mass-spectrometry techniques. Commercial-level DES techniques and equipment are being developed for the implementation of DES at the Nuclear Material Laboratory (NML) of International Atomic Energy Agency (IAEA) to provide complementary measurements to the existing technologies. The paper describes details of DES measurement methods, as well as DES precision and accuracy to U and Pu standard sources to discuss its capability in analysis of nuclear safeguards samples.

physics.ins-det↗

arXiv2024

Reactor Antineutrino Directionality Measurement with the PROSPECT-I Detector

The PROSPECT-I detector has several features that enable measurement of the direction of a compact neutrino source. In this paper, a detailed report on the directional measurements made on electron antineutrinos emitted from the High Flux Isotope Reactor is presented. With an estimated true neutrino (reactor to detector) direction of $ϕ= 40.8\unicode{xB0} \pm 0.7\unicode{xB0}$ and $θ= 98.6\unicode{xB0} \pm 0.4\unicode{xB0}$, the PROSPECT-I detector is able to reconstruct an average neutrino direction of $ϕ= 39.4\unicode{xB0} \pm 2.9\unicode{xB0}$ and $θ= 97.6\unicode{xB0} \pm 1.6\unicode{xB0}$. This measurement is made with approximately 48000 Inverse Beta Decay signal events and is the most precise directional reconstruction of reactor antineutrinos to date.

nucl-ex↗

arXiv2024

Separable integer partition classes and partitions with congruence conditions

In this article, we first investigate the partitions whose parts are congruent to $a$ or $b$ modulo $k$ with the aid of separable integer partition classes with modulus $k$ introduced by Andrews. Then, we introduce the $(k,r)$-overpartitions in which only parts equivalent to $r$ modulo $k$ may be overlined and we will show that the number of $(k,k)$-overpartitions of $n$ equals the number of partitions of $n$ such that the $k$-th occurrence of a part may be overlined. Finally, we extend separable integer partition classes with modulus $k$ to overpartitions and then give the generating function for $(k,r)$-modulo overpartitions, which are the $(k,r)$-overpartitions satisfying certain congruence conditions.

math.CO↗

arXiv2024

Inferring the scrape-off layer heat flux width in a divertor with a low degree of axisymmetry

Plasma facing components (PFCs) in the next generation of tokamak devices will operate in challenging environments, with heat loads predicted to exceed 10 MWm$^{-2}$. The magnitude of these heat loads is set by the width of the channel, the "scrape-off layer" (SOL), into which heat is exhausted, and can be characterised by an e-folding length scale for the decay of heat flux across the channel. It is expected this channel will narrow as tokamaks move towards reactor relevant conditions. Understanding the processes involved in setting the SOL heat flux width is imperative to be able to predict the heat loads PFCs must handle in future devices. Measurements of the SOL width are performed on the high-field spherical tokamak, ST40, using a newly commissioned infrared thermography system. With its high on-axis toroidal magnetic field ($\geq$1.5 T) ST40 is uniquely positioned to investigate the influence of toroidal field on the heat flux width in spherical tokamaks, whilst also extending measurements of the SOL width in spherical tokamaks to increased poloidal field ($\geq$0.3 T). Due to the divertor on ST40 having a low degree of axisymmetry, it is necessary for a set of radial measurements of the heat flux to be taken across the divertor, made possible using an automated toolchain that fully incorporates its 3D geometry. These radial profiles are combined with the magnetic topology of the plasma to infer the width of the SOL, with both single and double exponential profiles of heat flux observed. A reduction in the heat flux is observed toroidally across part of the divertor, with preliminary investigations indicating that partial shadowing occurs, resulting from the separation between magnetic field lines and trailing edges upstream of the observed region becoming comparable to the ion gyro-radius.

physics.plasm-ph↗

arXiv2024

Iterative assembly of $^{171}$Yb atom arrays with cavity-enhanced optical lattices

Assembling and maintaining large arrays of individually addressable atoms is a key requirement for continued scaling of neutral-atom-based quantum computers and simulators. In this work, we demonstrate a new paradigm for assembly of atomic arrays, based on a synergistic combination of optical tweezers and cavity-enhanced optical lattices, and the incremental filling of a target array from a repetitively filled reservoir. In this protocol, the tweezers provide microscopic rearrangement of atoms, while the cavity-enhanced lattices enable the creation of large numbers of optical traps with sufficient depth for rapid low-loss imaging of atoms. We apply this protocol to demonstrate near-deterministic filling (99% per-site occupancy) of 1225-site arrays of optical traps. Because the reservoir is repeatedly filled with fresh atoms, the array can be maintained in a filled state indefinitely. We anticipate that this protocol will be compatible with mid-circuit reloading of atoms into a quantum processor, which will be a key capability for running large-scale error-corrected quantum computations whose durations exceed the lifetime of a single atom in the system.

quant-ph↗

arXiv2024

Coherent amplitude modulation of continuous-wave light in cesium vapor

We report on observations of coherent, sustained oscillations in the absorption of continuous-wave light at 388 nm that excites the $6S_{1/2}\rightarrow 8P_{3/2}$ transition in cesium vapor. The oscillation frequency is close to the spacing of hyperfine levels of the $8P_{3/2}$ level that are excited simultaneously by the 388 nm field. We observe threshold behavior of the oscillation amplitude with pump power, and suggest that the effect is associated with infrared directional emission due to amplified spontaneous emission from the $8P_{3/2}\rightarrow 8S_{1/2}$ transition, that is assisted by retro-reflections from the cell windows. The effect may be used to probe a lasing process in an atomic vapor, by checking the temporal properties of the pump field transmitted through the vapor.

physics.atom-ph↗

arXiv2024

The SRG/eROSITA All-Sky Survey: SRG/eROSITA cross-calibration with Chandra and XMM-Newton using galaxy cluster gas temperatures

Galaxy cluster gas temperatures ($T$) play a crucial role in many cosmological and astrophysical studies. However, it has been shown that $T$ measurements can vary between different X-ray telescopes. These $T$ biases can propagate to several cluster applications for which $T$ can be used. Thus, it is important to accurately cross-calibrate X-ray instruments to account for systematic biases. In this work, we present the cross-calibration between SRG/eROSITA and Chandra/ACIS, and between SRG/eROSITA and XMM-Newton/EPIC, using for the first time a large sample of galaxy cluster $T$. To do so, we use the first eROSITA All-Sky Survey data and a large X-ray flux-limited cluster catalog. We measure X-ray $T$ for 186 independent cluster regions with both SRG/eROSITA and Chandra/ACIS in a self-consistent way, for three energy bands; 0.7-7 keV (full), 0.5-4 keV (soft), and 1.5-7 keV (hard). We do the same with SRG/eROSITA and XMM-Newton/EPIC for 71 different cluster regions and all three bands. We find that SRG/eROSITA measures systematically lower $T$ than the other two instruments. For the full band, SRG/eROSITA returns 20$\%$ and 14$\%$ lower $T$ than Chandra/ACIS and XMM-Newton/EPIC respectively, when the two latter instruments measure $k_{\text{B}}T\approx 3$ keV each. The discrepancy increases to 38\% and 32\% when Chandra/ACIS and XMM-Newton/EPIC measure $k_{\text{B}}T\approx 10$ keV respectively. For low-$T$ galaxy groups, the discrepancy becomes milder. The soft band shows a marginally lower discrepancy than the full band. In the hard band, the cross-calibration of SRG/eROSITA and the other instruments show stronger differences. We could not identify any possible systematic biases that significantly alleviated the tension. Finally, we provide conversion factors between SRG/eROSITA, Chandra/ACIS, and XMM-Newton/EPIC $T$ which will be beneficial for future cluster studies.

astro-ph.CO↗

arXiv2024

First high peak and average power single-pass THz FEL based on high brightness photoinjector

Advanced experiments using THz pump and X-ray probe pulses at modern free-electron lasers (FELs) like the European X-ray FEL require a frequency-tunable, high-power, narrow-band THz source maintaining the repetition rate and pulse structure of the X-ray pulses. This paper reports the first results from a THz source, that is based on a single-pass high-gain THz FEL operating with a central wavelength of 100 micrometers. The THz FEL prototype is currently in operation at the Photo Injector Test facility at DESY in Zeuthen (PITZ) and uses the same type of electron source as the European XFEL photo injector. A self-amplified spontaneous emission (SASE) FEL was envisioned as the main mechanism for generating the THz pulses. Although the THz FEL at PITZ is supposed to use the same mechanism as at X-ray facilities, it cannot be considered as a simple scaling of the radiation wavelength because there is a large difference in the number of electrons per radiation wavelength, which is five orders of magnitude higher for the THz case. The bunching factor arising from the electron beam current profile contributes strongly to the initial spontaneous emission starting the FEL process. Proof-of-principle experiments were done at PITZ using an LCLS-I undulator to generate the first high-power, high-repetition-rate single-pass THz FEL radiation. Electron bunches with a beam energy of ~17 MeV and a bunch charge of up to several nC are used to generate THz pulses with a pulse energy of several tens of microjoules. For example, for an electron beam with a charge of ~2.4 nC, more than 100 microjoules were generated at a central wavelength of 100 micrometers. The narrowband spectrum was also demonstrated by spectral measurements. These proof-of-principle experiments pave the way for a tunable, high-repetition-rate THz source providing pulses with energies in the millijoule range.

physics.acc-ph↗