arXiv subjects

X. Zou

Publications and source records attributed to X. Zou.

11 recordsLinked to original sources

arXiv2026

Nebular Phase Evolution of SN 2023ixf (I): From Circumstellar Infrared Echo to the onset of in-situ Dust Formation in a Type II Supernova

We present optical and near-infrared (NIR) photometric and spectroscopic observations of the Type II supernova SN 2023ixf spanning 150 to 750 days, combined with published early-time optical and infrared photometry, and JWST NIRSpec and MIRI spectroscopy, to disentangle circumstellar echo emission from newly formed internal dust. The combined dataset reveals an early infrared excess by 1.8 days, a broad secondary NIR rebrightening over about 89 to 175 days, progressive attenuation of the red wing of H-alpha from about 132 days, and CO emission detected by about 217 days. We identify the onset of H-alpha asymmetry as the first direct signature for internal dust formation, and modeling of the H-alpha profile over 140 to 418 days yields an internal silicate-equivalent dust mass of about 1.5e-6 to 6e-5 solar masses. By contrast, the early infrared evolution is best interpreted as echo-dominated: the 1.8 to 33.6 day excess is consistent with a radiative-flash infrared echo from pre-existing circumstellar dust, while the 89 to 175 day rebrightening is more naturally explained by a more extended echo arising from structured wind material. JWST spectral energy distribution modeling further reveals a multi-component infrared continuum in which a cold graphite component traces lingering echo emission, while a colder silicate-bearing component grows to about 2e-3 solar masses, providing the strongest late-time spectral energy distribution evidence that internal CDS/ejecta dust becomes substantial. SN 2023ixf therefore provides one of the clearest time-resolved case studies of dust signatures in a Type II supernova, linking early circumstellar reprocessing with increasingly important in situ dust formation.

astro-ph.SR↗

arXiv2024

Modified Axelrod Model Showing Opinion Convergence And Polarization In Realistic Scale-Free Networks

Axelrod model is an opinion dynamics model such that each agent on a square lattice has a finite number of possible nominal opinions on a finite number of issues that are usually called features in the field. Moreover, its dynamics between two agents is assimilative in the sense that the number of agreeing features between them never decreases upon interaction. Here we modify this model to study opinion convergence, polarization and more importantly to find ways to reduce opinion polarization in an already polarized population. We do so by changing or adding several elements from complex network and continuous opinion dynamics research. First, we put agents in a scale-free network. Second, we adopt the bounded confidence model by representing our agent's opinions by numbers in $[-1,1]$ those distances follow the standard Euclidean metric. Third, our rules allow both convergence and divergence of their resultant opinions after a pair of agents interacts. As a result, our modified model offers a more comprehensive exploration of opinion dynamics. Computer simulation results of our model show scaling behavior and a notable trend in opinion polarization on all features in the majority of reasonable simulation parameters. To mitigate this polarization, we introduce empathetic agents that work actively to reduce opinion differences. However, our findings indicate limited success in the approach for the most effective way is to change the behavior of a significant portion of highly connected agents. This research contributes to the understanding of opinion dynamics within society and highlights the nuanced complexities that arise when considering factors such as network structure and continuous opinion values. Our results prompt further exploration and open avenues for future investigations into effective methods of reducing opinion polarization.

physics.soc-ph↗

arXiv2022

Realization of a quantum neural network using repeat-until-success circuits in a superconducting quantum processor

Artificial neural networks are becoming an integral part of digital solutions to complex problems. However, employing neural networks on quantum processors faces challenges related to the implementation of non-linear functions using quantum circuits. In this paper, we use repeat-until-success circuits enabled by real-time control-flow feedback to realize quantum neurons with non-linear activation functions. These neurons constitute elementary building blocks that can be arranged in a variety of layouts to carry out deep learning tasks quantum coherently. As an example, we construct a minimal feedforward quantum neural network capable of learning all 2-to-1-bit Boolean functions by optimization of network activation parameters within the supervised-learning paradigm. This model is shown to perform non-linear classification and effectively learns from multiple copies of a single training state consisting of the maximal superposition of all inputs.

quant-ph↗

arXiv2022

A gravity antenna based on quantum technologies: MIGA

We report the realization of a large scale gravity antenna based on matter-wave interferometry, the MIGA project. This experiment consists in an array of cold Rb sources correlated by a 150 m long optical cavity. MIGA is in construction at the LSBB underground laboratory, a site that benefits from a low background noise and is an ideal premise to carry out precision gravity measurements. The MIGA facility will be a demonstrator for a new generation of GW detector based on atom interferometry that could open the infrasound window for the observation of GWs. We describe here the status of the instrument construction, focusing on the infrastructure works at LSBB and the realization of the vacuum vessel of the antenna.

physics.atom-ph↗

arXiv2022

Multi-photon Atom Interferometry via cavity-enhanced Bragg Diffraction

We present a novel atom interferometer configuration that combines large momentum transfer with the enhancement of an optical resonator for the purpose of measuring gravitational strain in the horizontal directions. Using Bragg diffraction and taking advantage of the optical gain provided by the resonator, we achieve momentum transfer up to $8\hbar k$ with mW level optical power in a cm-sized resonating waist. Importantly, our experiment uses an original resonator design that allows for a large resonating beam waist and eliminates the need to trap atoms in cavity modes. We demonstrate inertial sensitivity in the horizontal direction by measuring the change in tilt of our resonator. This result paves the way for future hybrid atom/optical gravitational wave detectors. Furthermore, the versatility of our method extends to a wide range of measurement geometries and atomic sources, opening up new avenues for the realization of highly sensitive inertial atom sensors.

physics.atom-ph↗

arXiv2020

Variational preparation of finite-temperature states on a quantum computer

The preparation of thermal equilibrium states is important for the simulation of condensed-matter and cosmology systems using a quantum computer. We present a method to prepare such mixed states with unitary operators, and demonstrate this technique experimentally using a gate-based quantum processor. Our method targets the generation of thermofield double states using a hybrid quantum-classical variational approach motivated by quantum-approximate optimization algorithms, without prior calculation of optimal variational parameters by numerical simulation. The fidelity of generated states to the thermal-equilibrium state smoothly varies from 99 to 75% between infinite and near-zero simulated temperature, in quantitative agreement with numerical simulations of the noisy quantum processor with error parameters drawn from experiment.

quant-ph↗

arXiv2020

A control hardware based on a field programmable gate array for experiments in atomic physics

Experiments in Atomic, Molecular, and Optical (AMO) physics require precise and accurate control of digital, analog, and radio frequency (RF) signals. We present a control hardware based on a field programmable gate array (FPGA) core which drives various modules via a simple interface bus. The system supports an operating frequency of 10 MHz and a memory depth of 8 M (2$^{23}$) instructions, both easily scalable. Successive experimental sequences can be stacked with no dead time and synchronized with external events at any instructions. Two or more units can be cascaded and synchronized to a common clock, a feature useful to operate large experimental setups in a modular way.

physics.atom-ph↗

arXiv2020

Technologies for the ELGAR large scale atom interferometer array

We proposed the European Laboratory for Gravitation and Atom-interferometric Research (ELGAR), an array of atom gradiometers aimed at studying space-time and gravitation with the primary goal of observing gravitational waves (GWs) in the infrasound band with a peak strain sensitivity of $3.3 \times 10^{-22}/\sqrt{\text{Hz}}$ at 1.7 Hz. In this paper we detail the main technological bricks of this large scale detector and emphasis the research pathways to be conducted for its realization. We discuss the site options, atom optics, and source requirements needed to reach the target sensitivity. We then discuss required seismic isolation techniques, Gravity Gradient Noise reduction strategies, and the metrology of various noise couplings to the detector.

physics.atom-ph↗

arXiv2019

A fibered laser system for the MIGA large scale atom interferometer

We describe the realization and characterization of a compact, autonomous fiber laser system that produces the optical frequencies required for laser cooling, trapping, manipulation, and detection of $^{87}$Rb atoms - a typical atomic species for emerging quantum technologies. This device, a customized laser system from the Muquans company, is designed for use in the challenging operating environment of the Laboratoire Souterrain à Bas Bruit (LSBB) in France, where a new large scale atom interferometer is being constructed underground - the MIGA antenna. The mobile bench comprises four frequency-agile C-band Telecom diode lasers that are frequency doubled to 780 nm after passing through high-power fiber amplifiers. The first laser is frequency stabilized on a saturated absorption signal via lock-in amplification, which serves as an optical frequency reference for the other three lasers via optical phase-locked loops. Power and polarization stability are maintained through a series of custom, flexible micro-optic splitter/combiners that contain polarization optics, acousto-optic modulators, and shutters. Here, we show how the laser system is designed, showcasing qualities such as reliability, stability, remote control, and flexibility, while maintaining the qualities of laboratory equipment. We characterize the laser system by measuring the power, polarization, and frequency stability. We conclude with a demonstration using a cold atom source from the MIGA project and show that this laser system fulfills all requirements for the realization of the antenna.

physics.atom-ph↗

arXiv2019

ELGAR -- a European Laboratory for Gravitation and Atom-interferometric Research

Gravitational Waves (GWs) were observed for the first time in 2015, one century after Einstein predicted their existence. There is now growing interest to extend the detection bandwidth to low frequency. The scientific potential of multi-frequency GW astronomy is enormous as it would enable to obtain a more complete picture of cosmic events and mechanisms. This is a unique and entirely new opportunity for the future of astronomy, the success of which depends upon the decisions being made on existing and new infrastructures. The prospect of combining observations from the future space-based instrument LISA together with third generation ground based detectors will open the way towards multi-band GW astronomy, but will leave the infrasound (0.1 Hz to 10 Hz) band uncovered. GW detectors based on matter wave interferometry promise to fill such a sensitivity gap. We propose the European Laboratory for Gravitation and Atom-interferometric Research (ELGAR), an underground infrastructure based on the latest progress in atomic physics, to study space-time and gravitation with the primary goal of detecting GWs in the infrasound band. ELGAR will directly inherit from large research facilities now being built in Europe for the study of large scale atom interferometry and will drive new pan-European synergies from top research centers developing quantum sensors. ELGAR will measure GW radiation in the infrasound band with a peak strain sensitivity of $4.1 \times 10^{-22}/\sqrt{\text{Hz}}$ at 1.7 Hz. The antenna will have an impact on diverse fundamental and applied research fields beyond GW astronomy, including gravitation, general relativity, and geology.

physics.atom-ph↗

arXiv2019

Characterizing Earth gravity field fluctuations with the MIGA antenna for future Gravitational Wave detectors

Fluctuations of the earth's gravity field are a major noise source for ground-based experiments investigating general relativity phenomena such as Gravitational Waves (GWs). Mass density variations caused by local seismic or atmospheric perturbations determine spurious differential displacements of the free falling test masses, what is called Gravity Gradient Noise (GGN); it mimics GW effects. This GGN is expected to become dominant in the infrasound domain and must be tackled for the future realization of observatories exploring GWs at low frequency. GGN will be studied with the MIGA experiment, a demonstrator for low frequency GW detection based on atom interferometry - now in construction at the low noise underground laboratory LSBB in France. MIGA will provide precise measurements of local gravity, probed by a network of three free-falling atom test masses separated up to 150~m. We model the effect of GGN for MIGA and use seismic and atmospheric data recorded at LSBB to characterize their impact on the future measurements. We show that the antenna will be able to characterize GGN using dedicated data analysis methods.

physics.atom-ph↗