arXiv subjects

Xavier Le Roux

Publications and source records attributed to Xavier Le Roux.

At least 19 recordsLinked to original sources

arXiv2023

Genetic optimization of Brillouin scattering gain in subwavelength-structured silicon membrane waveguides

On-chip Brillouin optomechanics has great potential for applications in communications, sensing, and quantum technologies. Tight confinement of near-infrared photons and gigahertz phonons in integrated waveguides remains a key challenge to achieving strong on-chip Brillouin gain. Here, we propose a new strategy to harness Brillouin gain in silicon waveguides, based on the combination of genetic algorithm optimization and periodic subwavelength structuration to engineer photonic and phononic modes simultaneously. The proposed geometry is composed of a waveguide core and a lattice of anchoring arms with a subwavelength period requiring a single etch step. The waveguide geometry is optimized to maximize the Brillouin gain using a multi-physics genetic algorithm. Our simulation results predict a remarkable Brillouin gain exceeding 3300 1/(W m), for a mechanical frequency near 15 GHz.

physics.optics↗

arXiv2022

Spatial and polarization division multiplexing harnessing on-chip optical beam forming

On-chip spatial and polarization multiplexing have emerged as a powerful strategy to boost the bandwidth of integrated optical transceivers. State-of-the-art multiplexers require accurate control of the relative phase or the spatial distribution among different guided optical modes, seriously compromising the bandwidth and performance of the devices. To overcome this limitation, we propose a new approach based on the coupling between guided modes in integrated waveguides and optical beams free-propagating on the chip plane. The engineering of the evanescent coupling between the guided modes and free-propagating beams allows spatial and polarization multiplexing with state-of-the-art performance. To demonstrate the potential and versatility of this approach, we have developed a two-polarization multiplexed link and a three-mode multiplexed link using standard 220-nm-thick silicon-on-insulator technology. The two-polarization link shows a measured -35 dB crosstalk bandwidth of 180 nm, while the three-mode link exhibits a -20 dB crosstalk bandwidth of 195 nm. These bandwidths cover the S, C, L, and U communication bands. We used these links to demonstrate error-free transmission (bit-error-rate < 10-9) of two and three non-return-to-zero signals at 40 Gbps each, with power penalties below 0.08 dB and 1.5 dB for the two-polarization and three-mode links respectively. The approach demonstrated here for two polarizations and three modes is also applicable to future implementation of more complex multiplexing schemes.

physics.optics↗

arXiv2022

Broadband behavior of quadratic metalenses with a wide field of view

Metalenses are attracting a large interest for the implementation of complex optical functionalities in planar and compact devices. However, chromatic and off-axis aberrations remain standing challenges. Here, we experimentally investigate the broadband behavior of metalenses based on quadratic phase profiles. We show that these metalenses do not only guarantee an arbitrarily large field of view but are also inherently tolerant to longitudinal and transverse chromatic aberrations. As such, we demonstrate a single-layer, silicon metalens with a field of view of 86° and a bandwidth up to 140 nm operating at both 1300 nm and 1550 nm telecommunication wavelength bands.

physics.optics↗

arXiv2021

Mid-infrared Fourier-transform spectrometer based on metamaterial lateral cladding suspended silicon waveguides

Integrated mid-infrared micro-spectrometers have a great potential for applications in environmental monitoring and space exploration. Silicon-on-insulator (SOI) is a promising platform to tackle this integration challenge, due to its unique capability for large volume and low-cost production of ultra-compact photonic circuits. However, the use of SOI in the mid-infrared is restricted by the strong absorption of the buried oxide layer for wavelengths beyond 4 μm. Here, we overcome this limitation by utilizing metamaterial-cladded suspended silicon waveguides to implement a spatial heterodyne Fourier-transform (SHFT) spectrometer operating near 5.5μm wavelength. The metamaterial-cladded geometry allows removal of the buried oxide layer, yielding measured propagation loss below 2 dB/cm between 5.3μm and 5.7μm wavelengths. The SHFT spectrometer comprises 19 Mach-Zehnder interferometers with a maximum arm length imbalance of 200 μm, achieving a measured spectral resolution of 13cm-1 and a free-spectral range of 100 cm-1 near 5.5μm wavelength.

physics.optics↗

arXiv2021

Generating 10-GHz phonons in nanostructured silicon membrane optomechanical cavity

Flexible control of photons and phonons in silicon nanophotonic waveguides is a key feature for emerging applications in communications, sensing and quantum technologies. Strong phonon leakage towards the silica under-cladding hampers optomechanical interactions in silicon-on-insulator. This limitation has been circumvented by totally or partially removing the silica under-cladding to form pedestal or silicon membrane waveguides. Remarkable optomechanical interactions have been demonstrated in silicon using pedestal strips, membrane ribs, and photonic/phononic crystal membrane waveguides. Still, the mechanical frequencies are limited to the 1-5 GHz range. Here, we exploit the periodic nanostructuration in Si membrane gratings to shape GHz phononic modes and near-infrared photonic modes, achieving ultrahigh mechanical frequency (10 GHz) and strong photon-phonon overlap (61.5%) simultaneously. Based on this concept, we experimentally demonstrate a one-dimension optomechanical micro-resonator with a high mechanical frequency of 10 GHz and a quality factor of 1000. These results were obtained at room temperature and ambient conditions with an intracavity optical power below 1 mW, illustrating the efficient optical driving of the mechanical mode enabled by the proposed approach.

physics.optics↗

arXiv2021

Silicon-on-insulator optomechanical microresonator with tight photon and phonon confinement

The implementation of optomechanical devices in silicon-on-insulator (SOI), the canonical silicon photonics technology is seriously hampered by the strong phonon leakage into the silica under-cladding. This limitation has been partially circumvented by total or partial removal of the silica under-cladding to form Si membranes or pedestal waveguides. However, this approach complicates integration with standard silicon optoelectronics circuitry, limiting the versatility and application of the strategy. Here, we propose and demonstrate a new strategy to confine photons and phonons in SOI without removing the silica under-cladding. Inspired by end-fire antenna arrays, we implement a periodic nanostructuration of silicon that simultaneously enables cancelling phonon leakage by destructive interference and guiding of photons by metamaterial index confinement. Based on this concept, we implement SOI optomechanical micro-resonators yielding remarkable optomechanical coupling (go=49 kHz) between 0.66 GHz mechanical modes and near-infrared optical modes. The mechanical mode exhibits a measured quality factor of Qm = 730, the largest reported for SOI optomechanical resonators, without silica removal. This value compares favorably with state-of-the-art Si membrane waveguides recently used to demonstrate remarkable Brillouin interactions in silicon (Qm ~ 700). These results open a new path for developing optomechanics in SOI without the need for silica removal, allowing seamless co-integration with current Si optoelectronics circuits, with a great potential for applications in communications, sensing, metrology, and quantum technologies.

physics.optics↗

arXiv2020

Stress measurements in silicon photonics by integrated Raman spectroscopy

Complex 3D integration of photonic and electronic integrated circuits is of particular interest to carry the photonics roadmap and to address challenges but involves mechanical stress, often detrimental for the behavior of optical components. Existing experiments failed to carefully analyze the stress in such integrated optical devices due to the requirement in terms of feature sizes, few hundreds of nanometers, and 3D-stacked integration. We present for the first time the characterization of the stress tensor of a silicon waveguide using Integrated Raman Spectroscopy (IRS). This experimental technique is directly sensitive to the effective stress, which involves changes in optical properties of the guided mode, at the working wavelength and polarization state of the photonic component. The experimental stress tensor is in good agreement with simulations.

physics.app-ph↗

arXiv2020

High-quality photonic entanglement based on a silicon chip

The fruitful association of quantum and integrated photonics holds the promise to produce, manipulate, and detect quantum states of light using compact and scalable systems. Integrating all the building-blocks necessary to produce high-quality photonic entanglement in the telecom wavelength range out of a single chip remains a major challenge, mainly due to the limited performance of on-chip light rejection filters. We report a stand-alone, telecom-compliant, device that integrates, on a single substrate, a nonlinear photon-pair generator and a passive pump rejection filter. Using standard channel-grid fiber demultiplexers, we demonstrate the first entanglement quantification of such a integrated circuit, showing the highest raw quantum interference visibility for energy-time entangled photons over two telecom-wavelength bands. Genuinely pure maximally entangled states can therefore be generated thanks to the high-level of noise suppression obtained with the pump filter. These results will certainly further promote the development of more advanced and scalable photonic-integrated quantum systems compliant with telecommunication standards.

quant-ph↗

arXiv2019

Optical modulation in Ge-rich SiGe waveguides in the mid-IR wavelength range up to 11 um

Waveguide integrated optical modulators in the mid-infrared (mid-IR) wavelength range are of significant interest for molecular spectroscopy in one hand, as on-chip synchronous detection can improve the performance of detection systems, and for free-space communications on the other hand, where optical modulators working in the atmospheric transparency windows are crucially missing. Here we report for the first time the demonstration of optical modulation in mid-IR photonic circuit reaching wavelengths larger than 8 um. Moreover, optical modulation in an unprecedented wavelength range, from 5.5 to 11 um wavelength is shown, relying on a broadband Ge-rich graded-SiGe platform. This first demonstration is used as a proof of concept, to experimentally confirm the free-carrier absorption effect modeling. These results pave the way towards efficient high-performance electrically-driven integrated optical modulators in the mid-IR wavelength range.

physics.optics↗

arXiv2019

Wideband tunable microwave signal generation in a silicon-based optoelectronic oscillator

Si photonics has an immense potential for the development of compact and low-loss opto-electronic oscillators (OEO), with applications in radar and wireless communications. However, current Si OEO have shown a limited performance. Si OEO relying on direct conversion of intensity modulated signals into the microwave domain yield a limited tunability. Wider tunability has been shown by indirect phase-modulation to intensity-modulation conversion, requiring precise control of the phase-modulation. Here, we propose a new approach enabling Si OEOs with wide tunability and direct intensity-modulation to microwave conversion. The microwave signal is created by the beating between an optical source and single sideband modulation signal, selected by an add-drop ring resonator working as an optical bandpass filter. The tunability is achieved by changing the wavelength spacing between the optical source and resonance peak of the resonator. Based on this concept, we experimentally demonstrate microwave signal generation between 6 GHz and 18 GHz, the widest range for a Si-based OEO. Moreover, preliminary results indicate that the proposed Si OEO provides precise refractive index monitoring, with a sensitivity of 94350 GHz RIU and a potential limit of detection of only 10-8 RIU, opening a new route for the implementation of high-performance Si photonic sensors.

physics.app-ph↗

arXiv2018

Generating Fano Resonances in a single-waveguide nanobeam cavity for efficient electro-optical modulation

We propose a method for generating Fano resonance in a standalone silicon nanobeam cavity which eliminates the inconvenience from the unexpected side-coupled bus waveguide and unlocks new opportunities to develop ultra-compact and ultra-fast electro-optical modulators.. Taking advantage from a spatial-division multiplexing principle of operation between transverse electric modes, a sharp resonant mode and an efficient flat background mode are simultaneously generated in the same silicon channel for the realization of efficient Fano resonances. Unambiguous asymmetric spectrum lineshapes are thoroughly investigated using numerical and analytical methods and experimentally demonstrated in the near infra-red around lambda=1.55μm, presenting an extinction ratio of about 17dB for a delta lambda =56 pm wavelength detuning for the 1st cavity mode (Q-factor Q=34000), and higher than 23 dB extinction ratio for a delta lambda=366 pm detuning for the 2nd cavity mode (Q=5600). These extinction ratios are 10~15 dB larger than their Lorentzian counterparts exhibiting similar Q factors. Silicon Fano modulation based on plasma dispersion effect is proposed, for which an energy consumption as low as few fJ/bit is estimated. Fano cavity scheme addressed in this paper presents a great potential for low power consumption silicon optical modulators and provides anew insight to the advantages of Fano resonances for optical modulation schemes.

physics.optics↗

arXiv2018

Polarization and wavelength agnostic nanophotonic beam splitter

High-performance optical beam splitters are of fundamental importance for the development of advanced silicon photonics integrated circuits. However, due to the high refractive index contrast of the silicon-on-insulator platform, state of the art Si splitters are hampered by trade-offs in bandwidth, polarization dependence and sensitivity to fabrication errors. Here, we present a new strategy that exploits modal engineering in slotted waveguides to overcome these limitations, enabling ultra-wideband polarization-insensitive optical power splitters, with relaxed fabrication tolerances. The proposed splitter relies on a single-mode slot waveguide which is transformed into two strip waveguides by a symmetric taper, yielding equal power splitting. Based on this concept, we experimentally demonstrate -3$\pm$0.5 dB polarization-independent transmission in an unprecedented 390 nm bandwidth (1260 - 1650 nm), even in the presence of waveguide width deviations as large as $\pm$25 nm.

physics.app-ph↗

arXiv2017

Optical pump-rejection filter based on silicon sub-wavelength engineered photonic structures

The high index contrast of the silicon-on-insulator (SOI) platform allows the realization of ultra-compact photonic circuits. However, this high contrast hinders the implementation of narrow-band Bragg filters. These typically require corrugations widths of a few nanometers or double-etch geometries, hampering device fabrication. Here we report, for the first time, on the realization of SOI Bragg filters based on sub-wavelength index engineering in a differential corrugation width configuration. The proposed double periodicity structure allows narrow-band rejection with a single etch step and relaxed width constraints. Based on this concept, we experimentally demonstrate a single-etch, $\mathbf{220\,nm}$ thick, Si Bragg filter featuring a corrugation width of $\mathbf{150\,nm}$, a rejection bandwidth of $\mathbf{1.1\,nm}$ and an extinction ratio exceeding $\mathbf{40\,dB}$. This represents a ten-fold width increase compared to conventional single-periodicity, single-etch counterparts with similar bandwidths.

physics.optics↗

arXiv2017

High-quality photonic entanglement for wavelength-multiplexed quantum communication based on a silicon chip

We report an efficient energy-time entangled photon-pair source based on four-wave mixing in a CMOS-compatible silicon photonics ring resonator. Thanks to suitable optimization, the source shows a large spectral brightness of 400\,pairs of entangled photons /s/MHz for $\rm 500\,μW$ pump power. Additionally, the resonator has been engineered so as to generate a frequency comb structure compatible with standard telecom dense wavelength division multiplexers. We demonstrate high-purity energy-time entanglement, i.e., free of photonic noise, with near perfect raw visibilities ($>$~98\%) between various channel pairs in the telecom C-band. Such a compact source stands as a path towards more complex quantum photonic circuits dedicated to quantum communication systems.

quant-ph↗

arXiv2016

Long-period suspended silicon Bragg grating filter for hybrid near- and mid-infrared operation

The large transparency window of silicon, covering the 1.1 um 8 um wavelength range, makes it a promising platform for the implementation of photothermal-based absorption spectrometers. These devices indirectly sense absorption in the mid-infrared (MIR) by using near-infrared (NIR) wavelengths, thereby enabling the realization of MIR absorption spectrometers without the need for MIR photodetectors. Nevertheless, due to their comparatively large index contrast and cross-sections, MIR Si strip waveguides are multi-mode at NIR wavelengths, hindering device implementation. Here we present, for the first time, an integrated Bragg grating waveguide filter for hybrid near- and mid-infrared operation. Specifically, the filter is implemented in a single-etch suspended silicon corrugated waveguide with an effectively single-mode operation in NIR region for a waveguide cross-section as large as 0.5 um x 1.1 um. At the same time, the waveguide supports single-mode propagation in MIR region. We demonstrate a long-period waveguide Bragg grating yielding a sharp third-order Bragg resonance for the fundamental waveguide mode and radiating the higher order modes. We experimentally demonstrate a notch filter with a 4nm bandwidth and 40 dB extinction ratio with a temperature-dependent Bragg wavelength shift of 70pm/K.

physics.optics↗

arXiv2015

Light Emission in Silicon from Carbon Nanotubes

The use of optics in microelectronic circuits to overcome the limitation of metallic interconnects is more and more considered as a viable solution. Among future silicon compatible materials, carbon nanotubes are promising candidates thanks to their ability to emit, modulate and detect light in the wavelength range of silicon transparency. We report the first integration of carbon nanotubes with silicon waveguides, successfully coupling their emission and absorption properties. A complete study of this coupling between carbon nanotubes and silicon waveguides was carried out, which led to the demonstration of the temperature-independent emission from carbon nanotubes in silicon at a wavelength of 1.3 μm. This represents the first milestone in the development of photonics based on carbon nanotubes on silicon.

physics.optics↗

arXiv2015

Electroabsorption study of index-defined semiconducting carbon nanotubes

Electroabsorption spectroscopy of well-identified index-defined semiconducting carbon nanotubes is reported. The measurement of high definition electroabsorption spectra allows direct indexation with unique nanotube chirality. Results show that at least for a limited range of diameters, electroabsorption is directly proportional to the exciton binding energy of nanotubes. Electroabsorption is a powerful technique which directly probes into carbon nanotube excitonic states, and may become a useful tool for in situ study of excitons in future nanotube-based photonic devices such as electroabsorption modulators.

cond-mat.mtrl-sci↗

arXiv2015

Controlling carbon nanotube photoluminescence using silicon microring resonators

We report on coupling between semiconducting single-wall carbon nanotubes (s-SWNT) photoluminescence and silicon microring resonators. Polyfluorene extracted s-SWNT deposited on such resonators exhibit sharp emission peaks, due to interaction with the cavity modes of the microring resonators. Ring resonators with radius of 5 μm and 10 μm were used, reaching quality factors up to 4000 in emission. These are among the highest values reported for carbon nanotubes coupled with an integrated cavity on silicon platform, which open up the possibility to build s-SWNT based efficient light source on silicon.

physics.optics↗