arXiv subjects

Xavier Pelorson

Publications and source records attributed to Xavier Pelorson.

8 recordsLinked to original sources

arXiv2008

Modelling the human pharyngeal airway: validation of numerical simulations using in vitro experiments

In the presented study, a numerical model which predicts the flow-induced collapse within the pharyngeal airway is validated using in vitro measurements. Theoretical simplifications were considered to limit the computation time. Systematic comparisons between simulations and measurements were performed on an in vitro replica, which reflects asymmetries of the geometry and of the tissue properties at the base of the tongue and in pathological conditions (strong initial obstruction). First, partial obstruction is observed and predicted. Moreover, the prediction accuracy of the numerical model is of 4.2% concerning the deformation (mean quadratic error on the constriction area). It shows the ability of the assumptions and method to predict accurately and quickly a fluid-structure interaction.

physics.med-ph↗

arXiv2008

Experimental Validation of Simplified Free Jet Turbulence Models Applied to the Vocal Tract

Sound production due to turbulence is widely shown to be an important phenomenon involved in a.o. fricatives, singing, whispering and speech pathologies. In spite of its relevance turbulent flow is not considered in classical physical speech production models mostly dealing with voiced sound production. The current study presents preliminary results of an experimental validation of simplified turbulence models in order to estimate the time-mean velocity distribution in a free jet downstream of a tube outlet. Aiming a future application in speech production the influence of typical vocal tract shape parameters on the velocity distribution is experimentally and theoretically explored: the tube shape, length and the degree and geometry of the constriction. Simplified theoretical predictions are obtained by applying similarity solutions of the bidimensional boundary layer theory to a plane and circular free jet in still air. The orifice velocity and shape are the main model input quantities. Results are discussed with respect to the upper airways and human sound production.

physics.class-ph↗

arXiv2007

A preliminary study of asymmetric vocal fold vibrations: modeling and "in-vitro" validation

This paper deals with some of aspects of the influence of asymmetry on vocal folds vibrations. A theoretical model of vocal fold asymmetry is presented. The influence of asymmetry is quantitatively examined in terms of oscillation frequency and pressure threshold. The theoretical model is compared to "in-vitro" experiment on a deformable replica of vocal folds. It is found that asymmetry strongly influences the oscillation subglottal pressure threshold. Moreover, the vocal fold with the highest mechanical resonance frequency imposes the oscillation fundamental frequency. The influence of geometrical asymmetry instead of purely mechanical asymmetry is shown

physics.class-ph↗

arXiv2007

Experimental validation and physical modelling of vocal folds pathologies

Voiced sounds involve self-sustained vocal folds oscillations due to the interaction between the airflow and the vocal folds. Common vocal folds pathologies like polyps and anatomical asymmetry degrade the mechanical vocal fold properties and consequently disturb the normal oscillation pattern resulting in an abnormal sound production. Treatment of voice abnormalities would benefit from an improved understanding between the pathology and the resulting oscillation pattern which motivates physical vocal folds modelling. The current study applies a theoretical vocal folds model to vocal folds pathologies. The theoretical vocal folds model is validated using an experimental set-up simulating the human phonatory apparatus. It consists in a pressure reservoir, a self-oscillating latex replica of the vocal folds and an acoustical resonator. The effects of pathologies are simulated by modifying the replica's geometry, elasticity, and homogeneity under controlled experimental conditions. In general, we observed a close match between measurements and theoretical predictions, which is all the more surprising considering the crudeness of the theoretical model

physics.class-ph↗

arXiv2007

A mechanical experimental setup to simulate vocal folds vibrations. Preliminary results

This paper contributes to the understanding of vocal folds oscillation during phonation. In order to test theoretical models of phonation, a new experimental set-up using a deformable vocal folds replica is presented. The replica is shown to be able to produce self sustained oscillations under controlled experimental conditions. Therefore different parameters, such as those related to elasticity, to acoustical coupling or to the subglottal pressure can be quantitatively studied. In this work we focused on the oscillation fundamental frequency and the upstream pressure in order to start (on-set threshold) either end (off-set threshold) oscillations in presence of a downstream acoustical resonator. As an example, it is shown how this data can be used in order to test the theoretical predictions of a simple one-mass model.

physics.class-ph↗

arXiv2006

Reproduction of hypopnea phenomenon using a physical and numerical model

Obstructive sleep apnea syndrome is now considered as a major health care topic. An in-vitro setup which reproduces and simplifies upper airway geometry has been the basis to study the fluid/walls interaction that leads to an apnea. It consists of a rigid pipe (the pharynx) in contact with a deformable latex cylinder filled with water (the tongue). Air flows out of the rigid pipe and induces pressure forces on the cylinder. We present a numerical model of this setup: a finite element model of the latex cylinder is in interaction with a fluid model. Simulation of an hypopnea (partial collapsus of the airway) has been possible and in agreement with observations from the in-vitro setup. The same phenomenon has been simulated on a soft palate model obtained from a patient sagittal radiography. These first results encourage us to improve the model so as it could reproduce the complete apnea phenomenon, and be used for a planification purpose in sleep apnea surgery.

physics.med-ph↗

arXiv2006

Physical modelling of the airflow-walls interactions to understand the sleep apnea syndrome

Sleep Apnea Syndrome (SAS) is defined as a partial or total closure of the patient upper airways during sleep. The term "collapsus" (or collapse) is used to describe this closure. From a fluid mechanical point of view, this collapse can be understood as a spectacular example of fluid-walls interaction. Indeed, the upper airways are delimited in their largest part by soft tissues having different geometrical and mechanical properties: velum, tongue and pharyngeal walls. Airway closure during SAS comes from the interaction between these soft tissues and the inspiratory flow. The aim of this work is to understand the physical phenomena at the origin of the collapsus and the metamorphosis in inspiratory flow pattern that has been reported during SAS. Indeed, a full comprehension of the physical conditions allowing this phenomenon is a prerequisite to be able to help in the planning of the surgical gesture that can be prescribed for the patients. The work presented here focuses on a simple model of fluid-walls interactions. The equations governing the airflow inside a constriction are coupled with a Finite Element (FE) biomechanical model of the velum. The geometries of this model is extracted from a single midsagittal radiography of a patient. The velar deformations induced by airflow interactions are computed, presented, discussed and compared to measurements collected onto an experimental setup.

physics.med-ph↗

arXiv2006

Biomechanical models to simulate consequences of maxillofacial surgery

This paper presents the biomechanical finite element models that have been developed in the framework of the computer-assisted maxillofacial surgery. After a brief overview of the continuous elastic modelling method, two models are introduced and their use for computer-assisted applications discussed. The first model deals with orthognathic surgery and aims at predicting the facial consequences of maxillary and mandibular osteotomies. For this, a generic three-dimensional model of the face is automatically adapted to the morphology of the patient by the mean of elastic registration. Qualitative simulations of the consequences of an osteotomy of the mandible can thus be provided. The second model addresses the Sleep Apnoea Syndrome. Its aim is to develop a complete modelling of the interaction between airflow and upper airways walls during respiration. Dynamical simulations of the interaction during a respiratory cycle are computed and compared with observed phenomena.

physics.med-ph↗