arXiv subjects

Xiang Cai

Publications and source records attributed to Xiang Cai.

9 recordsLinked to original sources

arXiv2026

Conjugate phase-noise cancellation enables submicrometre dual-comb ranging with free-running megahertz-linewidth lasers

Frequency-domain dual-comb ranging combines rapid acquisition with interferometric sensitivity, but high-performance implementations often rely on mutually coherent or actively stabilised comb sources. Free-running sources can reduce this hardware burden, but their phase noise and drift of the optical frequency offset can blur radio-frequency (RF) comb teeth and weaken probe-reference phase correlation. Previous phase-slope implementations have therefore relied on sufficiently resolved RF teeth, within-coherence-length probe-reference paths or explicit digital tracking of these fluctuations. Here we demonstrate a low-cost frequency-domain dual-comb ranging architecture that combines independent free-running distributed-feedback (DFB) lasers with conjugate phase-noise cancellation (CPNC). By forming a self-conjugate signal before the phases of individual RF-comb teeth are extracted, CPNC cancels the common laser phase factor and drifting optical-frequency-offset term while retaining the distance-dependent phase slope. Using electro-optic combs seeded by DFB lasers with linewidths of 12 MHz and 9 MHz, we achieve an Allan deviation of $219~\mathrm{nm}$ at $246~\mu\mathrm{s}$ and reduce the single-frame distance standard deviation from $558~\mu\mathrm{m}$ to $9.31~\mu\mathrm{m}$ with CPNC. Across the tested megahertz-linewidth configurations, CPNC delivered minimum Allan deviations below $250~\mathrm{nm}$. These results show that CPNC enables submicrometre ranging in a low-cost frequency-domain dual-comb architecture with reduced source-stabilisation and phase-management complexity.

physics.optics↗

arXiv2026

Anatomy Aware Cascade Network: Bridging Epistemic Uncertainty and Geometric Manifold for 3D Tooth Segmentation

Accurate three-dimensional (3D) tooth segmentation from Cone-Beam Computed Tomography (CBCT) is a prerequisite for digital dental workflows. However, achieving high-fidelity segmentation remains challenging due to adhesion artifacts in naturally occluded scans, which are caused by low contrast and indistinct inter-arch boundaries. To address these limitations, we propose the Anatomy Aware Cascade Network (AACNet), a coarse-to-fine framework designed to resolve boundary ambiguity while maintaining global structural consistency. Specifically, we introduce two mechanisms: the Ambiguity Gated Boundary Refiner (AGBR) and the Signed Distance Map guided Anatomical Attention (SDMAA). The AGBR employs an entropy based gating mechanism to perform targeted feature rectification in high uncertainty transition zones. Meanwhile, the SDMAA integrates implicit geometric constraints via signed distance map to enforce topological consistency, preventing the loss of spatial details associated with standard pooling. Experimental results on a dataset of 125 CBCT volumes demonstrate that AACNet achieves a Dice Similarity Coefficient of 90.17 \% and a 95\% Hausdorff Distance of 3.63 mm, significantly outperforming state-of-the-art methods. Furthermore, the model exhibits strong generalization on an external dataset with an HD95 of 2.19 mm, validating its reliability for downstream clinical applications such as surgical planning. Code for AACNet is available at https://github.com/shiliu0114/AACNet.

cs.CV↗

arXiv2025

Investigation of Tunable Structured Light Using Bilayer Parity-Time Symmetry Dammann Grating Metasurfaces

In the current technological landscape, structured light technology holds a critically important position. However, traditional structured light optical components often require complex systems and extensive resources for application, and they function in a fixed manner. This study takes this challenge as an opportunity to design a novel dynamically tunable double-layer Dammann grating (DG) metasurface. During the research, we developed a double-layer DG metasurface structure using silica as the substrate and lithium niobate (LiNbO3, LN) as the nanocolumn material. By specifically introducing parity-time (PT) symmetry, we designed three distinct states, combined with rotational transformations leveraging the Moir\'e effect. Further investigations revealed that for metasurfaces with different radius combinations, changes in rotation and PT symmetry states resulted in significant variations in the shape, position, and intensity of the diffraction spots, alongside changes in conversion efficiency and contrast ratio. This study thoroughly and comprehensively unveils the significant impacts of rotational transformations, PT symmetry, and radius combination on the optical characteristics of double-layer DG metasurfaces, providing a new method for the design of dynamic tunable optical components with structured light.

physics.optics↗

arXiv2024

MOSS: Motion-based 3D Clothed Human Synthesis from Monocular Video

Single-view clothed human reconstruction holds a central position in virtual reality applications, especially in contexts involving intricate human motions. It presents notable challenges in achieving realistic clothing deformation. Current methodologies often overlook the influence of motion on surface deformation, resulting in surfaces lacking the constraints imposed by global motion. To overcome these limitations, we introduce an innovative framework, Motion-Based 3D Clo}thed Humans Synthesis (MOSS), which employs kinematic information to achieve motion-aware Gaussian split on the human surface. Our framework consists of two modules: Kinematic Gaussian Locating Splatting (KGAS) and Surface Deformation Detector (UID). KGAS incorporates matrix-Fisher distribution to propagate global motion across the body surface. The density and rotation factors of this distribution explicitly control the Gaussians, thereby enhancing the realism of the reconstructed surface. Additionally, to address local occlusions in single-view, based on KGAS, UID identifies significant surfaces, and geometric reconstruction is performed to compensate for these deformations. Experimental results demonstrate that MOSS achieves state-of-the-art visual quality in 3D clothed human synthesis from monocular videos. Notably, we improve the Human NeRF and the Gaussian Splatting by 33.94% and 16.75% in LPIPS* respectively. Codes are available at https://wanghongsheng01.github.io/MOSS/.

cs.CV↗

arXiv2022

Ultrafast carbon nanotube photodetectors with bandwidth over 60 GHz

The future interconnect links in intra- and inter-chip require the photodetector with high bandwidth, ultra-wide waveband, compact footprint, low-cost, and compatible integration process with silicon complementary metal-oxide-semiconductor (CMOS) technology. Here, we demonstrate a CMOS-compatible carbon nanotube (CNT) photodetector that exhibits high responsivity, high bandwidth and broad spectral operation over all optical telecommunication band based on high-purity CNT arrays. The ultrafast CNT photodetector demonstrates the 100 Gbit/s Nyquist-shaped on-off-keying (OOK) signal transmission, which can address the demand for high-speed optical interconnects in and between data centers. Furthermore, the photodetector exhibits a bandwidth over 60 GHz by scaling down the active area to 20 μm2. As the CNT photodetectors are fabricated by doping-free process, it also provides a cost-effective solution to integrate CNT photonic devices with CNT-based CMOS integrated circuits. Our work paves a way for future CNT-based high-speed optical interconnects and optoelectronic integrated circuits (OEICs).

physics.optics↗

arXiv2022

Using Frequency Attention to Make Adversarial Patch Powerful Against Person Detector

Deep neural networks (DNNs) are vulnerable to adversarial attacks. In particular, object detectors may be attacked by applying a particular adversarial patch to the image. However, because the patch shrinks during preprocessing, most existing approaches that employ adversarial patches to attack object detectors would diminish the attack success rate on small and medium targets. This paper proposes a Frequency Module(FRAN), a frequency-domain attention module for guiding patch generation. This is the first study to introduce frequency domain attention to optimize the attack capabilities of adversarial patches. Our method increases the attack success rates of small and medium targets by 4.18% and 3.89%, respectively, over the state-of-the-art attack method for fooling the human detector while assaulting YOLOv3 without reducing the attack success rate of big targets.

cs.CV↗

arXiv2020

A Statistical Estimation of the Occurrence of Extraterrestrial Intelligence in the Milky Way Galaxy

In the field of Astrobiology, the precise location, prevalence and age of potential extraterrestrial intelligence (ETI) have not been explicitly explored. Here, we address these inquiries using an empirical galactic simulation model to analyze the spatial-temporal variations and the prevalence of potential ETI within the Galaxy. This model estimates the occurrence of ETI, providing guidance on where to look for intelligent life in the Search for ETI (SETI) with a set of criteria, including well-established astrophysical properties of the Milky Way. Further, typically overlooked factors such as the process of abiogenesis, different evolutionary timescales and potential self-annihilation are incorporated to explore the growth propensity of ETI. We examine three major parameters: 1) the likelihood rate of abiogenesis (λA); 2) evolutionary timescales (Tevo); and 3) probability of self-annihilation of complex life (Pann). We found Pann to be the most influential parameter determining the quantity and age of galactic intelligent life. Our model simulation also identified a peak location for ETI at an annular region approximately 4 kpc from the Galactic center around 8 billion years (Gyrs), with complex life decreasing temporally and spatially from the peak point, asserting a high likelihood of intelligent life in the galactic inner disk. The simulated age distributions also suggest that most of the intelligent life in our galaxy are young, thus making observation or detection difficult.

astro-ph.GA↗

arXiv2018

Enhanced thermoelectric performance of twisted bilayer graphene nanoribbons junction

We investigate the electron transport and thermoelectric property of twisted bilayer graphene nanoribbon junction (TBGNRJ) in $0^o$, $21.8^o$, $38.2^o$ and $60^o$ rotation angles by first principles calculation with Landauer-Buttiker and Boltzmann theories. It is found that TBGNRJs exhibit negative differential resistance (NDR) in $21.8^o$ and $38.2^o$ rotation angles under $\pm$ 0.2 V bias voltage. More importantly, three peak ZT values of 2.0, 2.7 and 6.1 can be achieved in the $21.8^o$ rotation angle at 300K. The outstanding ZT values of TBGNRJs are interpreted as the combination of the reduced thermal conductivity and enhanced electrical conductivity at optimized angles.

cond-mat.mes-hall↗

arXiv2014

New Approaches to Website Fingerprinting Defenses

Website fingerprinting attacks enable an adversary to infer which website a victim is visiting, even if the victim uses an encrypting proxy, such as Tor. Previous work has shown that all proposed defenses against website fingerprinting attacks are ineffective. This paper advances the study of website fingerprinting attacks and defenses in two ways. First, we develop bounds on the trade-off between security and bandwidth overhead that any fingerprinting defense scheme can achieve. This enables us to compare schemes with different security/overhead trade-offs by comparing how close they are to the lower bound. We then refine, implement, and evaluate the Congestion Sensitive BuFLO scheme outlined by Cai, et al. CS-BuFLO, which is based on the provably-secure BuFLO defense proposed by Dyer, et al., was not fully-specified by Cai, et al, but has nonetheless attracted the attention of the Tor developers. Our experiments find that CS-BuFLO has high overhead (around 2.3-2.8x) but can get 6x closer to the bandwidth/security trade-off lower bound than Tor or plain SSH.

cs.CR↗