arXiv subjects

Xiangyun Zhou

Publications and source records attributed to Xiangyun Zhou.

At least 55 records · Page 3Linked to original sources

arXiv2020

Performance Characterization of Relaying Using Backscatter Devices

In this paper, we examine the error performance of backscatter communication in the presence of ambient interference, where the backscatter device acts as a relay. Specifically, the performance comparison of amplify-and-forward (AF) and decode-and-forward (DF) backscatter relaying is considered for the first time. Considering energy-based detection for on-off keying (OOK) modulation, we derive the statistics of the received signal power, from which the detection thresholds and corresponding bit error rates (BER) are obtained analytically. For the DF scheme, we allow the source node to transmit continuous-wave signals during the relay-to-destination transmission phase to power the backscatter relay. Under a total power budget constraint at the source, we optimize the power allocation for the transmissions in the source-to-relay and relay-to-destination phases. Numerical analysis shows that the DF scheme with optimal power allocation performs similarly compared to the AF scheme, despite the added complexity of the decoding operation. On the other hand, the AF scheme significantly outperforms the DF scheme when the reflection coefficients at the backscatter device do not correspond to perfect OOK. These results provide valuable insights into the design and deployment of backscatter nodes with the goal of improving coverage.

cs.IT↗

arXiv2020

A Retrodirective Wireless Power Transfer Scheme for Ambient Backscatter Systems

One of the key challenges of the Internet of Things (IoT) is to sustainably power the large number of IoT devices in real-time. In this paper, we consider a wireless power transfer (WPT) scenario between an energy transmitter (ET) capable of retrodirective WPT and an energy receiver (ER) capable of ambient backscatter in the presence of an ambient source (AS). The ER requests WPT by backscattering signals from an AS towards the ET, which then retrodirectively beamforms an energy signal towards the ER. To remove the inherent direct-link ambient interference, we propose a scheme of ambient backscatter training. Specifically, the ER varies the reflection coefficient multiple times while backscattering each ambient symbol according to a certain pattern called the training sequence, whose design criterion we also present. To evaluate the system performance, we derive an analytical expression for the average harvested power at the ER. Our numerical results show that with the proposed scheme, the ER harvests tens of $μ$W of power, without any CSI estimation or active transmission from the ER, which is a significant improvement for low-power and low-cost ambient backscatter devices.

cs.IT↗

arXiv2020

On the Performance of Splitting Receiver with Joint Coherent and Non-Coherent Processing

In this paper, we revisit a recently proposed receiver design, named the splitting receiver, which jointly uses coherent and non-coherent processing for signal detection. By considering an improved signal model for the splitting receiver as compared to the original study in the literature, we conduct a performance analysis on the achievable data rate under Gaussian signaling and obtain a fundamentally different result on the performance gain of the splitting receiver over traditional receiver designs that use either coherent or non-coherent processing alone. Specifically, the original study ignored the antenna noise and concluded on a 50% gain in achievable data rate in the high signal-to-noise ratio (SNR) regime. In contrast, we include the antenna noise in the signal model and show that the splitting receiver improves the achievable data rate by a constant gap in the high SNR regime. This represents an important correction of the theoretical understanding on the performance of the splitting receiver. In addition, we examine the maximum-likelihood detection and derive a low-complexity detection rule for the splitting receiver for practical modulation schemes. Our numerical results give further insights into the conditions under which the splitting receiver achieves significant gains in terms of either achievable data rate or detection error probability.

cs.IT↗

arXiv2019

SWIPT with Practical Modulation and RF Energy Harvesting Sensitivity

In this paper, we investigate the performance of simultaneous wireless information and power transfer (SWIPT) in a point-to-point system, adopting practical $M$-ary modulation. We take into account the fact that the receiver's radio-frequency (RF) energy harvesting circuit can only harvest energy when the received signal power is greater than a certain sensitivity level. For both power-splitting (PS) and time-switching (TS) schemes, we derive the energy harvesting performance as well as the information decoding performance for the Nakagami-$m$ fading channel. We also analyze the performance tradeoff between energy harvesting and information decoding by studying an optimization problem, which maximizes the information decoding performance and satisfies a constraint on the minimum harvested energy. Our analysis shows that (i) for the PS scheme, modulations with high peak-to-average power ratio achieve better energy harvesting performance, (ii) for the TS scheme, it is desirable to concentrate the power for wireless power transfer in order to minimize the non-harvested energy caused by the RF energy harvesting sensitivity level, and (iii) channel fading is beneficial for energy harvesting in both PS and TS schemes.

cs.IT↗

arXiv2019

Uplink NOMA for Cellular-Connected UAV: Impact of UAV Trajectories and Altitude

This paper considers an emerging cellular-connected unmanned aerial vehicle (UAV) architecture for surveillance or monitoring applications. We consider a scenario where a cellular-connected aerial user equipment (AUE) periodically transmits in uplink, with a given data rate requirement, while moving along a given trajectory. For efficient spectrum usage, we enable the concurrent uplink transmission of the AUE and a terrestrial user equipment (TUE) by employing power-domain aerial-terrestrial non-orthogonal multiple access (NOMA), while accounting for the AUE's known trajectory. To characterize the system performance, we develop an analytical framework to compute the rate coverage probability, i.e., the probability that the achievable data rate of both the AUE and TUE exceeds the respective target rates. We use our analytical results to numerically determine the minimum height that the AUE needs to fly, at each transmission point along a given trajectory, in order to satisfy a certain quality of service (QoS) constraint for various AUE target data rates and different built-up environments. Specifically, the results show that the minimum height of the AUE depends on its distance from the BS as the AUE moves along the given trajectory. Our results highlight the importance of modeling AUE trajectory in cellular-connected UAV systems.

cs.IT↗

arXiv2019

Covert Wireless Communication in Presence of a Multi-Antenna Adversary and Delay Constraints

Covert communication hides the transmission of a message from a watchful adversary while ensuring reliable information decoding at the receiver, providing enhanced security in wireless communications. In this letter, covert communication in the presence of a multi-antenna adversary and under delay constraints is considered. Under the assumption of quasi-static wireless fading channels, we analyze the effect of increasing the number of antennas employed at the adversary on the achievable throughput of covert communication. It is shown that in contrast to a single-antenna adversary, a slight increase in the number of adversary's antennas drastically reduces the covert throughput, even for relaxed covertness requirements.

cs.IT↗

arXiv2019

Sequencing and Scheduling for Multi-User Machine-Type Communication

In this paper, we propose joint sequencing and scheduling optimization for uplink machine-type communication (MTC). We consider multiple energy-constrained MTC devices that transmit data to a base station following the time division multiple access (TDMA) protocol. Conventionally, the energy efficiency performance in TDMA is optimized through multi-user scheduling, i.e., changing the transmission block length allocated to different devices. In such a system, the sequence of devices for transmission, i.e., who transmits first and who transmits second, etc., has not been considered as it does not have any impact on the energy efficiency. In this work, we consider that data compression is performed before transmission and show that the multi-user sequencing is indeed important. We apply three popular energy-minimization system objectives, which differ in terms of the overall system performance and fairness among the devices. We jointly optimize both multi-user sequencing and scheduling along with the compression and transmission rate control. Our results show that multi-user sequence optimization significantly improves the energy efficiency performance of the system. Notably, it makes the TDMA-based multi-user transmissions more likely to be feasible in the lower latency regime, and the performance gain is larger when the delay bound is stringent.

cs.IT↗

arXiv2019

One-Way URLLC with Truncated Channel Inversion Power Control

In this work, we consider one-way ultra-reliable and low-latency communication (URLLC), where only the transmission in one direction requires URLLC and the transmission in the opposite direction does not. In order to meet the low-latency requirement of the one-way URLLC, we propose to use a truncated channel inversion power control (CIPC) to eliminate the requirement and the associated overhead of the training-based channel estimation at the receiver, while utilizing the multi-antenna technique at the transmitter to enhance the communication reliability. We first derive the transmission outage probability achieved by the truncated CIPC by considering the impact of a finite blocklength and a maximum transmit power constraint. Then, we determine the optimal constant power of the received signals in the truncated CIPC, which minimizes the transmission outage probability. Our examination shows that the proposed truncated CIPC is an effective means to achieve the one-way URLLC, where the tradeoff among reliability, latency, and required resources (e.g., the required number of transmit antennas, or the required maximum transmit power) is revealed.

cs.IT↗

arXiv2019

Low Probability of Detection Communication: Opportunities and Challenges

Low probability of detection (LPD) communication has recently emerged as a new transmission technology to address privacy and security in wireless networks. Recent studies have established the fundamental limits of LPD communication in terms of the amount of information bits that can be conveyed from a transmitter to a receiver subject to a constraint on a warden's detection error probability. The established information-theoretic metric enables analytical studies on the design and performance of LPD communication under various channel conditions. In this article, we present the key features of LPD communication and discuss various important design considerations. Firstly, we clarify the differences between LPD communication and the well-known physical-layer security. Then, from an information-theoretic point of view, we discuss the optimal signalling strategies for transmitting the message-carrying signal and artificial-noise signal for LPD communication. Finally, we identify the key challenges in the design of practical LPD communication systems and point out future research directions in this context. This article provides guidelines for designing practical LPD communication strategies in wireless systems and networks.

cs.IT↗

arXiv2019

Gaussian Signalling for Covert Communications

In this work, we examine the optimality of Gaussian signalling for covert communications with an upper bound on $\mathcal{D}(p_{_1}||p_{_0})$ or $\mathcal{D}(p_{_0}||p_{_1})$ as the covertness constraint, where $\mathcal{D}(p_{_1}||p_{_0})$ and $\mathcal{D}(p_{_0}||p_{_1})$ are different due to the asymmetry of Kullback-Leibler divergence, $p_{_0}(y)$ and $p_{_1}(y)$ are the likelihood functions of the observation ${y}$ at the warden under the null hypothesis (no covert transmission) and alternative hypothesis (a covert transmission occurs), respectively. Considering additive white Gaussian noise at both the receiver and the warden, we prove that Gaussian signalling is optimal in terms of maximizing the mutual information of transmitted and received signals for covert communications with an upper bound on $\mathcal{D}(p_{_1}||p_{_0})$ as the constraint. More interestingly, we also prove that Gaussian signalling is not optimal for covert communications with an upper bound on $\mathcal{D}(p_{_0}||p_{_1})$ as the constraint, for which as we explicitly show skew-normal signalling can outperform Gaussian signalling in terms of achieving higher mutual information. Finally, we prove that, for Gaussian signalling, an upper bound on $\mathcal{D}(p_{_1}||p_{_0})$ is a tighter covertness constraint in terms of leading to lower mutual information than the same upper bound on $\mathcal{D}(p_{_0}||p_{_1})$, by proving $\mathcal{D}(p_{_0}||p_{_1}) \leq \mathcal{D}(p_{_1}||p_{_0})$.

cs.IT↗

arXiv2019

Next Generation Backscatter Communication: Systems, Techniques and Applications

The rapid growth of IoT driven by recent advancements in consumer electronics, 5G communication technologies, and cloud-computing enabled big-data analytics, has recently attracted tremendous attention from both the industry and academia. One of the major open challenges for IoT is the limited network lifetime due to massive IoT devices being powered by batteries with finite capacities. The low-power and low-complexity backscatter communications (BackCom), which simply relies on passive reflection and modulation of an incident radio-frequency (RF) wave, has emerged to be a promising technology for tackling this challenge. However, the contemporary BackCom has several major limitations, such as short transmission range, low data rate, and uni-directional information transmission. The article aims at introducing the recent advances in the active area of BackCom. Specifically, we provide a systematic introduction of the next generation BackCom covering basic principles, systems, techniques besides IoT applications. Lastly, we describe the IoT application scenarios with the next generation BackCom.

cs.IT↗

arXiv2019

Optimal Online Transmission Policy for Energy-Constrained Wireless-Powered Communication Networks

This work considers the design of online transmission policy in a wireless-powered communication system with a given energy budget. The system design objective is to maximize the long-term throughput of the system exploiting the energy storage capability at the wireless-powered node. We formulate the design problem as a constrained Markov decision process (CMDP) problem and obtain the optimal policy of transmit power and time allocation in each fading block via the Lagrangian approach. To investigate the system performance in different scenarios, numerical simulations are conducted with various system parameters. Our simulation results show that the optimal policy significantly outperforms a myopic policy which only maximizes the throughput in the current fading block. Moreover, the optimal allocation of transmit power and time is shown to be insensitive to the change of modulation and coding schemes, which facilitates its practical implementation.

cs.IT↗

arXiv2018

Covert Wireless Communications with Channel Inversion Power Control in Rayleigh Fading

In this work, we adopt channel inversion power control (CIPC) to achieve covert communications aided by a full-duplex receiver. Specifically, the transmitter varies the power and phase of transmitted signals as per the channel to the receiver, such that the receiver can decode these signals without knowing the channel state information. This eliminates the required feedback from the transmitter to the receiver, which aids hiding the transmitter from a warden. The truncated CIPC and conventional CIPC schemes are proposed and examined, where for truncated CIPC covert transmission ceases when the channel quality from the transmitter to the receiver is low, while for conventional CIPC covert transmission always occurs regardless of this channel quality. We examine their performance in terms of the achieved effective covert throughput (ECT), which quantifies the amount of information that the transmitter can reliably convey to the receiver, subject to the constraint that the warden's detection error probability is no less than some specific value. Our examination shows that the truncated CIPC scheme can outperform the conventional CIPC scheme due to this constraint.

cs.IT↗

arXiv2018

Achieving Covert Wireless Communications Using a Full-Duplex Receiver

Covert communications hide the transmission of a message from a watchful adversary while ensuring a certain decoding performance at the receiver. In this work, a wireless communication system under fading channels is considered where covertness is achieved by using a full-duplex (FD) receiver. More precisely, the receiver of covert information generates artificial noise with a varying power causing uncertainty at the adversary, Willie, regarding the statistics of the received signals. Given that Willie's optimal detector is a threshold test on the received power, we derive a closed-form expression for the optimal detection performance of Willie averaged over the fading channel realizations. Furthermore, we provide guidelines for the optimal choice of artificial noise power range, and the optimal transmission probability of covert information to maximize the detection errors at Willie. Our analysis shows that the transmission of artificial noise, although causes self-interference, provides the opportunity of achieving covertness but its transmit power levels need to be managed carefully. We also demonstrate that the prior transmission probability of 0.5 is not always the best choice for achieving the maximum possible covertness, when the covert transmission probability and artificial noise power can be jointly optimized.

cs.IT↗

arXiv2018

Optimal Compression and Transmission Rate Control for Node-Lifetime Maximization

We consider a system that is composed of an energy constrained sensor node and a sink node, and devise optimal data compression and transmission policies with an objective to prolong the lifetime of the sensor node. While applying compression before transmission reduces the energy consumption of transmitting the sensed data, blindly applying too much compression may even exceed the cost of transmitting raw data, thereby losing its purpose. Hence, it is important to investigate the trade-off between data compression and transmission energy costs. In this paper, we study the joint optimal compression-transmission design in three scenarios which differ in terms of the available channel information at the sensor node, and cover a wide range of practical situations. We formulate and solve joint optimization problems aiming to maximize the lifetime of the sensor node whilst satisfying specific delay and bit error rate (BER) constraints. Our results show that a jointly optimized compression-transmission policy achieves significantly longer lifetime (90% to 2000%) as compared to optimizing transmission only without compression. Importantly, this performance advantage is most profound when the delay constraint is stringent, which demonstrates its suitability for low latency communication in future wireless networks.

cs.IT↗

arXiv2018

Covert Communication Achieved by A Greedy Relay in Wireless Networks

Covert communication aims to hide the very existence of wireless transmissions in order to guarantee a strong security in wireless networks. In this work, we examine the possibility and achievable performance of covert communication in one-way relay networks. Specifically, the relay is greedy and opportunistically transmits its own information to the destination covertly on top of forwarding the source's message, while the source tries to detect this covert transmission to discover the illegitimate usage of the resource (e.g., power, spectrum) allocated only for the purpose of forwarding source's information. We propose two strategies for the relay to transmit its covert information, namely fixed-rate and fixed-power transmission schemes, for which the source's detection limits are analysed in terms of the false alarm and miss detection rates and the achievable effective covert rates from the relay to destination are derived. Our examination determines the conditions under which the fixed-rate transmission scheme outperforms the fixed-power transmission scheme, and vice versa, which enables the relay to achieve the maximum effective covert rate. Our analysis indicates that the relay has to forward the source's message to shield its covert transmission and the effective covert rate increases with its forwarding ability (e.g., its maximum transmit power).

cs.IT↗

arXiv2018

Covert Wireless Communication with a Poisson Field of Interferers

In this paper, we study covert communication in wireless networks consisting of a transmitter, Alice, an intended receiver, Bob, a warden, Willie, and a Poisson field of interferers. Bob and Willie are subject to uncertain shot noise due to the ambient signals from interferers in the network. With the aid of stochastic geometry, we analyze the throughput of the covert communication between Alice and Bob subject to given requirements on the covertness against Willie and the reliability of decoding at Bob. We consider non-fading and fading channels. We analytically obtain interesting findings on the impacts of the density and the transmit power of the concurrent interferers on the covert throughput. That is, the density and the transmit power of the interferers have no impact on the covert throughput as long as the network stays in the interference-limited regime, for both the non-fading and the fading cases. When the interference is sufficiently small and comparable with the receiver noise, the covert throughput increases as the density or the transmit power of the concurrent interferers increases.

cs.IT↗

arXiv2018

Error Bounds for Uplink and Downlink 3D Localization in 5G mmWave Systems

Location-aware communication systems are expected to play a pivotal part in the next generation of mobile communication networks. Therefore, there is a need to understand the localization limits in these networks, particularly, using millimeter-wave technology (mmWave). Towards that, we address the uplink and downlink localization limits in terms of 3D position and orientation error bounds for mmWave multipath channels. We also carry out a detailed analysis of the dependence of the bounds of different systems parameters. Our key findings indicate that the uplink and downlink behave differently in two distinct ways. First of all, the error bounds have different scaling factors with respect to the number of antennas in the uplink and downlink. Secondly, uplink localization is sensitive to the orientation angle of the user equipment (UE), whereas downlink is not. Moreover, in the considered outdoor scenarios, the non-line-of-sight paths generally improve localization when a line-of-sight path exists. Finally, our numerical results show that mmWave systems are capable of localizing a UE with sub-meter position error, and sub-degree orientation error.

cs.IT↗