arXiv subjects

Xianmin Zhang

Publications and source records attributed to Xianmin Zhang.

At least 19 recordsLinked to original sources

arXiv2025

Quantum fluctuations associated with first-order magnetic transition in a frustrated kagome lattice antiferromagnet

Intense quantum fluctuations arising from geometrical frustrations in kagome-lattice magnets provide a feasible approach to exotic quantum states. Here, we document an unexpected isosymmetric first-order magnetic transition in the recently synthesized frustrated kagome-lattice antiferromagnet Nd3ScBi5, which is characterized by significant latent heat and a pronounced magnetocaloric effect, as well as discontinuous Raman shifts and negligible hysteresis. Employing the magnetocaloric effect as a detection method, in conjunction with systematical field-dependent physical properties, we uncover a distinctive 1/2 magnetization plateau phase with significant quantum fluctuations. Our study unveils Nd3ScBi5 as a prototypical model with an emerging phase of enhanced quantum fluctuations triggered by first-order magnetic transitions.

cond-mat.str-el↗

arXiv2025

Quasi-linear magnetoresistance and paramagnetic singularity in Hypervalent Bismuthide

Materials featuring hypervalent bismuth motifs have generated immense interest due to their extraordinary electronic structure and exotic quantum transport. In this study, we synthesized high-quality single crystals of La3ScBi5 characterized by one-dimensional hypervalent bismuth chains and performed a systematic investigation of the magnetoresistive behavior and quantum oscillations. The metallic La3ScBi5 exhibits a low-temperature plateau of electrical resistivity and quasi-linear positive magnetoresistance, with anisotropic magnetoresistive behaviors suggesting the presence of anisotropic Fermi surfaces. This distinctive transport phenomenon is perfectly elucidated by first-principles calculations utilizing the semiclassical Boltzmann transport theory. Furthermore, the nonlinear Hall resistivity pointed towards a multiband electronic structure, characterized by the coexistence of electron and hole carriers, which is further supported by our first-principles calculations. Angle-dependent de Haas-van Alphen oscillations are crucial for further elucidating its Fermiology and topological characteristics. Intriguingly, magnetization measurements unveiled a notable paramagnetic singularity at low fields, which might suggest the nontrivial nature of the surface states. Our findings underscore the interplay between transport phenomena and the unique electronic structure of hypervalent bismuthide La3ScBi5, opening avenues for exploring novel electronic applications.

cond-mat.mtrl-sci↗

arXiv2025

Stability Frontiers and Mixed-dimensional physics in the Kagome Intermetallics Ln3ScBi5 (Ln = La-Nd, Sm)

Low-dimensional physics provides profound insights into strongly correlated interactions, leading to enhanced quantum effects and the emergence of exotic quantum states. The Ln3ScBi5 family stands out as a chemically versatile kagome platform with mixed low-dimensional structural framework and tunable physical properties. Our research initiates with a comprehensive evaluation of the currently known Ln3ScBi5 (Ln = La-Nd, Sm) materials, providing a robust methodology for assessing their stability frontiers within this system. Focusing on Pr3ScBi5, we investigate the influence of the zigzag chains of quasi-one-dimensional (Q1D) motifs and the distorted kagome layers of quasi-two-dimensional (Q2D) networks in the mixed-dimensional structure on the intricate magnetic ground states and unique spin fluctuations. Our study reveals that the noncollinear antiferromagnetic (AFM) moments of Pr3+ ions are confined within the Q2D kagome planes, displaying minimal in-plane anisotropy. In contrast, a strong AFM coupling is observed within the Q1D zigzag chains, significantly constraining spin motion. Notably, the magnetic frustration is partially the consequence of coupling to conduction electrons via the Ruderman-Kittel-Kasuya Yosida (RKKY) interaction, highlighting a promising framework for future investigations into mixed-dimensional frustration in Ln3ScBi5 systems.

cond-mat.str-el↗

arXiv2025

Magnetization plateau and anisotropic magnetoresistance in the frustrated Kondo-lattice compound Ce3ScBi5

Kondo metals with geometric frustration offer fertile ground for exploring exotic states of matter with a field-induced fractional magnetization platform and nonsaturating magnetoresistance. Herein, a Ce3ScBi5 single crystal with anti-Hf5Sn3Cu hexagonal structure was successfully synthesized via the bismuth self-flux method, leading to the formation of cerium cations arranged in a frustrated structure within a distorted kagome lattice. Magnetic measurements exhibit two distinct antiferromagnetic transitions at 4.1 and 5.9 K. Specifically, the occurrence of multiple metamagnetic transitions between magnetization plateaus is evidenced upon applying magnetic fields perpendicular to the c axis. Transport measurements highlight remarkable Kondo-lattice characteristics and anisotropic magnetoresistance in Ce3ScBi5. The anomalous Hall contributions are observed at low temperatures under critical fields, suggesting Fermi surface reconstruction in a subset of the metamagnetic transitions. We have constructed a temperature-field phase diagram to provide comprehensive information on the complex magnetic structures arising from competitive interactions. Our work establishes Ce3ScBi5 and related materials as a unique platform for exploring low-dimensional quantum fluctuations in bulk crystals, and analyzes the critical role of geometric frustration in Kondo and Ruderman-Kittel-Kasuya-Yosida physical frameworks.

cond-mat.str-el↗

arXiv2025

Femtosecond signatures of optically induced magnons before ultrafast demagnetization

Optically induced demagnetization of 3d metallic ferromagnets proceeds as fast as ~100 fs and is a crucial prerequisite for spintronic applications, such as ultrafast magnetization switching and spin transport. On the 100 fs time scale, the magnetization dynamics is widely understood in the context of temperature models considering energy transfers between conduction electrons, magnons and crystal lattice. However, on even faster time scales, the flow of both angular momentum and energy between these subsystems has so far not been studied. Here, we measure ultrafast demagnetization by ultrabroadband THz-emission spectroscopy. We find that the rate of change of the magnetization does not rise instantaneously, but on a time scale as short as 10 fs. This rise is a signature that a transfer of angular momentum from the magnons to conduction electrons proceeds in less than 10 fs, before substantial demagnetization has happened. We further conclude that most of the spin dissipated by the lattice is transferred via magnon-lattice rather than electron-lattice interaction. These results show that the limiting speed of magnetization dynamics is not demagnetization, as generally believed, and harnessing the earliest magnon dynamics could be a new route towards an even faster spintronics.

cond-mat.mes-hall↗

arXiv2025

Femtosecond photocurrents by the Dresselhaus bulk spin-galvanic effect in an inversion-asymmetric ferromagnet

We study ultrafast photocurrents in thin films of a model ferromagnetic metal with broken bulk inversion symmetry, the half-metallic Heusler compound NiMnSb, following excitation with an optical pump pulse with photon energy 1.55 eV. Remarkably, in terms of the direction of the sample magnetization M, all photocurrents are found to be a superposition of a component with Rashba- and Dresselhaus-type symmetry. We explain the Dresselhaus bulk photocurrent as follows: Pump-induced electron heating induces an excess of spin μ_s||M, which transfers spin angular momentum into states with Dresselhaus-type spin-momentum locking. The resulting charge current relaxes on a time scale of 10 fs by momentum relaxation and, thus, follows μ_s quasi-instantaneously. The relaxation of μ_s is governed by the cooling of the electrons and not by the significantly slower spin-lattice relaxation of half-metals. Our findings add the Dresselhaus spin-galvanic effect (SGE) to the set of ultrafast spin-charge-conversion phenomena. They indicate a route to more efficient spintronic terahertz emitters and detectors based on the volume scaling of the bulk SGE.

cond-mat.mtrl-sci↗

arXiv2024

Enhancing Management of Large-Scale Optical Networks through RFID Technology Integration

Managing large-scale optical distribution networks is a daunting task. This paper introduces a novel solution using radio frequency identification (RFID) technology to transform the procedure we monitor and manage the complex optical network dumb resources (ONDR). By implementing and deploying removable RFID tag pairing based on the serial peripheral interface (SPI) communication protocol, the system identifies 30 pairs of tags within one second, even at densities of up to 5.1 tagged components per square inch of patch panel surface area. The integration of light-emitting diode (LED) navigation aids in indicating correctly matched interfaces, effectively addressing the complexities associated with large-scale fiber matching.

cs.NI↗

arXiv2024

Breaking the Degrees-of-Freedom Limit of Holographic MIMO Communications: A 3-D Antenna Array Topology

The performance of holographic multiple-input multiple-output (MIMO) communications, employing two-dimensional (2-D) planar antenna arrays, is typically compromised by finite degrees-of-freedom (DOF) stemming from limited array size. The DOF constraint becomes significant when the element spacing approaches approximately half a wavelength, thereby restricting the overall performance of MIMO systems. To break this inherent limitation, we propose a novel three-dimensional (3-D) antenna array that strategically explores the untapped vertical dimension. We investigate the performance of MIMO systems utilizing 3-D arrays across different multi-path scenarios, encompassing Rayleigh channels with varying angular spreads and the 3rd generation partnership project (3GPP) channels. We subsequently showcase the advantages of these 3-D arrays over their 2-D counterparts with the same aperture sizes. As a proof of concept, a practical dipole-based 3-D array, facilitated by an electromagnetic band-gap (EBG) reflecting surface, is conceived, constructed, and evaluated. The experimental results align closely with full-wave simulations, and channel simulations substantiate that the DOF and capacity constraints of traditional holographic MIMO systems can be surpassed by adopting such a 3-D array configuration.

cs.IT↗

arXiv2022

Approaching the Fundamental Limit of Orbital Angular Momentum Multiplexing Through a Hologram Metasurface

Establishing and approaching the fundamental limit of orbital angular momentum (OAM) multiplexing are necessary and increasingly urgent for current multiple-input multiple-output research. In this work, we elaborate the fundamental limit in terms of independent scattering channels (or degrees of freedom of scattered fields) through angular-spectral analysis, in conjunction with a rigorous Green function method. The scattering channel limit is universal for arbitrary spatial mode multiplexing, which is launched by a planar electromagnetic device, such as antenna, metasurface, etc, with a predefined physical size. As a proof of concept, we demonstrate both theoretically and experimentally the limit by a metasurface hologram that transforms orthogonal OAM modes to plane-wave modes scattered at critically separated angular-spectral regions. Particularly, a minimax optimization algorithm is applied to suppress angular spectrum aliasing, achieving good performances in both full-wave simulation and experimental measurement at microwave frequencies. This work offers a theoretical upper bound and corresponding approach route for engineering designs of OAM multiplexing.

physics.app-ph↗

arXiv2021

Plane Spiral OAM Mode-Group Based MIMO Communications: An Experimental Study

Spatial division multiplexing using conventional orbital angular momentum (OAM) has become a well-known physical layer transmission method over the past decade. The mode-group (MG) superposed by specific single mode plane spiral OAM (PSOAM) waves has been proved to be a flexible beamforming method to achieve the azimuthal pattern diversity, which inherits the spiral phase distribution of conventional OAM wave. Thus, it possesses both the beam directionality and vorticity. In this paper, it's the first time to show and verify novel PSOAM MG based multiple-in-multiple-out (MIMO) communication link (MG-MIMO) experimentally in a line-of-sight (LoS) scenario. A compact multi-mode PSOAM antenna is demonstrated experimentally to generate multiple independent controllable PSOAM waves, which can be used for constructing MGs. After several proof-of-principle tests, it has been verified that the beam directionality gain of MG can improve the receiving signal-to-noise (SNR) level in an actual system, meanwhile, the vorticity can provide another degree of freedom (DoF) to reduce the spatial correlation of MIMO system. Furthermore, a tentative long-distance transmission experiment operated at 10.2 GHz has been performed successfully at a distance of 50 m with a single-way spectrum efficiency of 3.7 bits/s/Hz/stream. The proposed MG-MIMO may have potential in the long-distance LoS back-haul scenario.

eess.SP↗

arXiv2020

Theoretical analysis of the non-uniform OAM source based on an equivalent source transformation

Orbital angular momentum (OAM) has gradually become a research hotspot in radar, communication and other fields because of its phase distribution. However it encounters some problems in the real practice owing to its inherent characteristics. Recently OAM mode group has been proposed to solve these problems. In this paper, a non-uniform OAM source is used to generate the OAM mode-group (MG) directly. The radiation field is analyzed based on an equivalent source transformation. Taking the partial arc transmitting (PAT) scheme as an example, the non-uniform source is equivalenced as a group of uniform OAM sources by calculated its Fourier transform. This work provides theoretical guidance for the design of non-uniform OAM antenna in the RF domain.

physics.class-ph↗

arXiv2020

A Compact Pattern Reconfigurable Antenna Based on Multimode Plane Spiral OAM

Orbital angular momentum (OAM) has attracted great interest in the past few decades due to its helical phase characteristics. It has been proved that Plane spiral OAM (PSOAM) has potential in pattern reconfiguration of azimuthal domain because it solves the difficulty of mode superposition caused by different main lobe directions of different modes. However, the absence of a compact high-purity multimode PSOAM antenna hinders the development of PSOAM applications. In this paper, a compact high-purity 8-mode PSOAM antenna consisting of a coaxial resonator group (CRG) and a rotating parabolic reflector (RPR) is designed. It works in the X-band with the bandwidth of 140 MHz, and its efficiency is greater than 90$\%$. Amplitude and phase of each PSOAM beam generated by this antenna can be controlled independently owing to its feed network and separate resonators design, hence any target pattern in azimuthal domain can be approximately reconfigured by modes weighting. The simulation and experiment results show that this antenna can make the PSOAM based pattern configuration possible, which will have potential in the OAM based applications.

physics.class-ph↗

arXiv2020

OAM Mode-Group Generation Method: Partial Arc Transmitting Scheme

A partial slotted curved waveguide leaky-wave antenna which can generate orbital angular momentum (OAM) mode-groups (MG) with high equivalent OAM order negative and positive 40 at 60 GHz is proposed in this paper. The proposed antenna with partial slotting is designed according to the circular traveling-wave antenna which can generate single conventional OAM wave, so it can be regarded as partial arc transmitting (PAT) scheme compared with the full 2pi aperture slotting of the circular traveling-wave antenna. The full-wave simulation results show that the generated OAM MGs present a high gain beam with a helical phase distribution. This method may lead to novel applications for next generation communication and radar system.

eess.SP↗

arXiv2020

Broadband Enhancement of On-chip Single Photon Extraction via Tilted Hyperbolic Metamaterials

A fundamental building block for on-chip quantum photonics is a single-photon source with high repetition rates, which can enable many applications such as high-speed quantum communication and quantum information processing. Ideally, such single photon sources would then require a large on-chip photon extraction decay rate, namely the rate of excited photons coupled into nanofibers or waveguides, over a broad spectral range. However, this goal has remained elusive till date. Here we propose a feasible scheme to enhance the on-chip photon extraction decay rate of quantum emitters, through the tilting of the optical axis of hyperbolic metamaterials with respect to the end-facet of nanofibers. Importantly, the revealed scheme is applicable to arbitrarily orientated quantum emitters over a broad spectral range, e.g., up to ~80 nm for visible light. The underlying physics relies on the emerging unique feature of hyperbolic metamaterials if their optical axis is judiciously tilted. That is, their supported high-k (i.e., wavevector) hyperbolic eigenmodes, which are intrinsically confined inside them if their optical axis is un-tilted, can now become momentum-matched with the guided modes of nanofibers, and more importantly, they can safely couple into nanofibers almost without reflection.

physics.optics↗

arXiv2018

Three-dimensional visible-light invisibility cloak

The concept of an invisibility cloak is a fixture of science fiction, fantasy, and the collective imagination. However, a real device that could hide an object from sight in visible light from absolutely any viewpoint would be extremely challenging to build. The main obstacle to creating such a cloak is the coupling of the electromagnetic components of light, which would necessitate the use of complex materials with specific permittivity and permeability tensors. Previous cloaking solutions have involved circumventing this obstacle by functioning either in static (or quasi-static) fields where these electromagnetic components are uncoupled or in diffusive light scattering media where complex materials are not required. In this paper, we report concealing a large-scale spherical object from human sight from three orthogonal directions. We achieve this result by developing a three-dimensional (3D) homogeneous polyhedral transformation and a spatially invariant refractive index discretization that considerably reduce the coupling of the electromagnetic components of visible light. This approach allows for a major simplification in the design of 3D invisibility cloaks, which can now be created at a large scale using homogeneous and isotropic materials.

physics.optics↗

arXiv2016

Graphene induced mode bifurcation at low input power

We study analytically the plasmonic modes in the graphene-coated dielectric nanowire, based on the explicit form of nonlinear surface conductivity of graphene. The propagation constants of different plasmonic modes can be tuned by the input power at the order of a few tenths of mW. The lower and upper mode bifurcation branches are connected at the limitation value of the input power. Moreover, due to the nonlinearity of graphene, the dispersion curves of plasmonic modes at different input powers form an energy band, which is in sharp contrast with the single dispersion curve in the limit of zero input power.

physics.optics↗

arXiv2015

Concealing arbitrary objects remotely with multi-folded transformation optics

An invisibility cloak that can hide an arbitrary object external to the cloak itself has not been devised before. In this Letter, we introduce a novel way to design a remote cloaking device that makes any object located at a certain distance invisible. This is accomplished using multi-folded transformation optics to remotely generate a hidden region around the object that no field can penetrate and that does not disturb the far-field scattering electromagnetic field. As a result, any object in the hidden region can stay in position or move freely within that region and remain invisible. Our idea is further extended in order to design a remote illusion optics that can transform any arbitrary object into another one. Unlike other cloaking methods, this method would require no knowledge of the details of the object itself. The proposed multi-folded transformation optics will be crucial in the design of remote devices in a variety of contexts.

physics.optics↗

arXiv2015

Local topological charge analysis of electromagnetic vortex beam based on empirical mode decomposition

The topological charge of an electromagnetic vortex beam depends on its wavefront helicity. For mixed vortex beams composed of several different coaxial vortices, the topological charge spectrum can be obtained by Fourier transform. However, the vortex beam is generally divergent and imperfect. It makes it significant to investigate the local topological charges, especially in radio frequency regime. Fourier transform based methods are restrained by the uncertainty principle and cannot achieve high angular resolution and mode resolution simultaneously. In this letter, an analysis method for local topological charges of vortex beams is presented based on the empirical mode decomposition (EMD). From EMD, the intrinsic mode functions (IMFs) can be obtained to construct the bases of the electromagnetic wave, and each local topological charge can be respectively defined. With this method the local value achieves both high resolution of azimuth angle and topological charge, meanwhile the amplitudes of each OAM modes are presented as well. The simulation and experimental results confirm the validity of the EMD based method.

physics.data-an↗