arXiv subjects

Xiao Lu

Publications and source records attributed to Xiao Lu.

70 records · Page 4Linked to original sources

arXiv2017

Cyber Insurance for Heterogeneous Wireless Networks

Heterogeneous wireless networks (HWNs) composed of densely deployed base stations of different types with various radio access technologies have become a prevailing trend to accommodate ever-increasing traffic demand in enormous volume. Nowadays, users rely heavily on HWNs for ubiquitous network access that contains valuable and critical information such as financial transactions, e-health, and public safety. Cyber risks, representing one of the most significant threats to network security and reliability, are increasing in severity. To address this problem, this article introduces the concept of cyber insurance to transfer the cyber risk (i.e., service outage, as a consequence of cyber risks in HWNs) to a third party insurer. Firstly, a review of the enabling technologies for HWNs and their vulnerabilities to cyber risks is presented. Then, the fundamentals of cyber insurance are introduced, and subsequently, a cyber insurance framework for HWNs is presented. Finally, open issues are discussed and the challenges are highlighted for integrating cyber insurance as a service of next generation HWNs.

cs.NI↗

arXiv2017

PMU Assisted Power System Parameter Calibration at Jiangsu Electric Power Company

An online PMU-assisted Power System Parameter Calibration System (PSPCS) was recently developed and implemented at State Grid Jiangsu Electric Power Company (JEPC). PSPCS leverages high-resolution PMU data and data mining techniques to perform online screening of the EMS and Production Management System (PMS) databases for data cleaning, model validation, and parameter calibration. PSPCS calculates transmission line and generator parameters on a regular real-time basis and compares the results with databases to identify record(s) with significant discrepancy, if any. Once consistent discrepancy is observed, the system will raise a flag and further investigation will be initiated, including a novel density-based spatial clustering procedure for parameter/data calibration. A novel metric is proposed to quantify the credibility of PMU-based parameter identification. This paper discusses the proposed methodologies, challenges, as well as implementation issues identified during the development and deployment of PSPCS.

eess.SY↗

arXiv2015

Wireless Charging Technologies: Fundamentals, Standards, and Network Applications

Wireless charging is a technology of transmitting power through an air gap to electrical devices for the purpose of energy replenishment. The recent progress in wireless charging techniques and development of commercial products have provided a promising alternative way to address the energy bottleneck of conventionally portable battery-powered devices. However, the incorporation of wireless charging into the existing wireless communication systems also brings along a series of challenging issues with regard to implementation, scheduling, and power management. In this article, we present a comprehensive overview of wireless charging techniques, the developments in technical standards, and their recent advances in network applications. In particular, with regard to network applications, we review the mobile charger dispatch strategies, static charger scheduling strategies and wireless charger deployment strategies. Additionally, we discuss open issues and challenges in implementing wireless charging technologies. Finally, we envision some practical future network applications of wireless charging.

cs.NI↗

arXiv2015

Performance Analysis of Ambient RF Energy Harvesting with Repulsive Point Process Modeling

Ambient RF (Radio Frequency) energy harvesting technique has recently been proposed as a potential solution to provide proactive energy replenishment for wireless devices. This paper aims to analyze the performance of a battery-free wireless sensor powered by ambient RF energy harvesting using a stochastic geometry approach. Specifically, we consider the point-to-point uplink transmission of a wireless sensor in a stochastic geometry network, where ambient RF sources, such as mobile transmit devices, access points and base stations, are distributed as a Ginibre alpha-determinantal point process (DPP). The DPP is able to capture repulsion among points, and hence, it is more general than the Poisson point process (PPP). We analyze two common receiver architectures: separated receiver and time-switching architectures. For each architecture, we consider the scenarios with and without co-channel interference for information transmission. We derive the expectation of the RF energy harvesting rate in closed form and also compute its variance. Moreover, we perform a worst-case study which derives the upper bound of both power and transmission outage probabilities. Additionally, we provide guidelines on the setting of optimal time-switching coefficient in the case of the time-switching architecture. Numerical results verify the correctness of the analysis and show various tradeoffs between parameter setting. Lastly, we prove that the sensor is more efficient when the distribution of the ambient sources exhibits stronger repulsion.

cs.NI↗

arXiv2015

Applications of Repeated Games in Wireless Networks: A Survey

A repeated game is an effective tool to model interactions and conflicts for players aiming to achieve their objectives in a long-term basis. Contrary to static noncooperative games that model an interaction among players in only one period, in repeated games, interactions of players repeat for multiple periods; and thus the players become aware of other players' past behaviors and their future benefits, and will adapt their behavior accordingly. In wireless networks, conflicts among wireless nodes can lead to selfish behaviors, resulting in poor network performances and detrimental individual payoffs. In this paper, we survey the applications of repeated games in different wireless networks. The main goal is to demonstrate the use of repeated games to encourage wireless nodes to cooperate, thereby improving network performances and avoiding network disruption due to selfish behaviors. Furthermore, various problems in wireless networks and variations of repeated game models together with the corresponding solutions are discussed in this survey. Finally, we outline some open issues and future research directions.

cs.GT↗

arXiv2015

Hierarchical Cooperation for Operator-Controlled Device-to-Device Communications: A Layered Coalitional Game Approach

Device-to-Device (D2D) communications, which allow direct communication among mobile devices, have been proposed as an enabler of local services in 3GPP LTE-Advanced (LTE-A) cellular networks. This work investigates a hierarchical LTE-A network framework consisting of multiple D2D operators at the upper layer and a group of devices at the lower layer. We propose a cooperative model that allows the operators to improve their utility in terms of revenue by sharing their devices, and the devices to improve their payoff in terms of end-to-end throughput by collaboratively performing multi-path routing. To help understanding the interaction among operators and devices, we present a game-theoretic framework to model the cooperation behavior, and further, we propose a layered coalitional game (LCG) to address the decision making problems among them. Specifically, the cooperation of operators is modeled as an overlapping coalition formation game (CFG) in a partition form, in which operators should form a stable coalitional structure. Moreover, the cooperation of devices is modeled as a coalitional graphical game (CGG), in which devices establish links among each other to form a stable network structure for multi-path routing.We adopt the extended recursive core, and Nash network, as the stability concept for the proposed CFG and CGG, respectively. Numerical results demonstrate that the proposed LCG yields notable gains compared to both the non-cooperative case and a LCG variant and achieves good convergence speed.

cs.NI↗

arXiv2015

Performance Analysis of Simultaneous Wireless Information and Power Transfer with Ambient RF Energy Harvesting

The advance in RF energy transfer and harvesting technique over the past decade has enabled wireless energy replenishment for electronic devices, which is deemed as a promising alternative to address the energy bottleneck of conventional battery-powered devices. In this paper, by using a stochastic geometry approach, we aim to analyze the performance of an RF-powered wireless sensor in a downlink simultaneous wireless information and power transfer (SWIPT) system with ambient RF transmitters. Specifically, we consider the point-to-point downlink SWIPT transmission from an access point to a wireless sensor in a network, where ambient RF transmitters are distributed as a Ginibre ?$α$-determinantal point process (DPP), which becomes the Poisson point process when $α$? approaches zero. In the considered network, we focus on analyzing the performance of a sensor equipped with the power-splitting architecture. Under this architecture, we characterize the expected RF energy harvesting rate of the sensor. Moreover, we derive the upper bound of both power and transmission outage probabilities. Numerical results show that our upper bounds are accurate for different value of ?$α$.

cs.IT↗

arXiv2014

Wireless Charger Networking for Mobile Devices: Fundamentals, Standards, and Applications

Wireless charging is a technique of transmitting power through an air gap to an electrical device for the purpose of energy replenishment. Recently, the wireless charging technology has been significantly advanced in terms of efficiency and functionality. This article first presents an overview and fundamentals of wireless charging. We then provide the review of standards, i.e., Qi and Alliance for Wireless Power (A4WP), and highlight on their communication protocols. Next, we propose a novel concept of wireless charger networking which allows chargers to be connected to facilitate information collection and control. We demonstrate the application of the wireless charger network in user-charger assignment, which clearly shows the benefit in terms of reduced cost for users to identify the best chargers to replenish energy for their mobile devices.

cs.NI↗

arXiv2014

Wireless Networks with RF Energy Harvesting: A Contemporary Survey

Radio frequency (RF) energy transfer and harvesting techniques have recently become alternative methods to power the next generation wireless networks. As this emerging technology enables proactive energy replenishment of wireless devices, it is advantageous in supporting applications with quality of service (QoS) requirement. In this paper, we present an extensive literature review on the research progresses in wireless networks with RF energy harvesting capability, referred to as RF energy harvesting networks (RF-EHNs). First, we present an overview of the RF-EHNs including system architecture, RF energy harvesting techniques and existing applications. Then, we present the background in circuit design as well as the state-of-the-art circuitry implementations, and review the communication protocols specially designed for RF-EHNs. We also explore various key design issues in the development of RF-EHNs according to the network types, i.e., single-hop network, multi-antenna network, relay network and cognitive radio network. Finally, we envision some open research directions.

cs.NI↗

arXiv2014

Performance Analysis of Ambient RF Energy Harvesting: A Stochastic Geometry Approach

cs.IT↗

arXiv2014

Resource Allocation in Wireless Networks with RF Energy Harvesting and Transfer

Radio frequency (RF) energy harvesting and transfer techniques have recently become alternative methods to power the next generation of wireless networks. As this emerging technology enables proactive replenishment of wireless devices, it is advantageous in supporting applications with quality-of-service (QoS) requirement. This article focuses on the resource allocation issues in wireless networks with RF energy harvesting capability, referred to as RF energy harvesting networks (RF-EHNs). First, we present an overview of the RF-EHNs, followed by a review of a variety of issues regarding resource allocation. Then, we present a case study of designing in the receiver operation policy, which is of paramount importance in the RF-EHNs. We focus on QoS support and service differentiation, which have not been addressed by previous literatures. Furthermore, we outline some open research directions.

cs.NI↗

arXiv2014

Dynamic Spectrum Access in Cognitive Radio Networks with RF Energy Harvesting

Spectrum efficiency and energy efficiency are two critical issues in designing wireless networks. Through dynamic spectrum access, cognitive radios can improve the spectrum efficiency and capacity of wireless networks. On the other hand, radio frequency (RF) energy harvesting has emerged as a promising technique to supply energy to wireless networks and thereby increase their energy efficiency. Therefore, to achieve both spectrum and energy efficiencies, the secondary users in a cognitive radio network (CRN) can be equipped with the RF energy harvesting capability and such a network can be referred to as an RF-powered cognitive radio network. In this article, we provide an overview of the RF-powered CRNs and discuss the challenges that arise for dynamic spectrum access in these networks. Focusing on the tradeoff among spectrum sensing, data transmission, and RF energy harvesting, then we discuss the dynamic channel selection problem in a multi-channel RF-powered CRN. In the RF-powered CRN, a secondary user can adaptively select a channel to transmit data when the channel is not occupied by any primary user. Alternatively, the secondary user can harvest RF energy for data transmission if the channel is occupied. The optimal channel selection policy of the secondary user can be obtained by formulating a Markov decision process (MDP) problem. We present some numerical results obtained by solving this MDP problem.

cs.NI↗

arXiv2014

SSthreshless Start: A Sender-Side TCP Intelligence for Long Fat Network

Measurement shows that 85% of TCP flows in the internet are short-lived flows that stay most of their operation in the TCP startup phase. However, many previous studies indicate that the traditional TCP Slow Start algorithm does not perform well, especially in long fat networks. Two obvious problems are known to impact the Slow Start performance, which are the blind initial setting of the Slow Start threshold and the aggressive increase of the probing rate during the startup phase regardless of the buffer sizes along the path. Current efforts focusing on tuning the Slow Start threshold and/or probing rate during the startup phase have not been considered very effective, which has prompted an investigation with a different approach. In this paper, we present a novel TCP startup method, called threshold-less slow start or SSthreshless Start, which does not need the Slow Start threshold to operate. Instead, SSthreshless Start uses the backlog status at bottleneck buffer to adaptively adjust probing rate which allows better seizing of the available bandwidth. Comparing to the traditional and other major modified startup methods, our simulation results show that SSthreshless Start achieves significant performance improvement during the startup phase. Moreover, SSthreshless Start scales well with a wide range of buffer size, propagation delay and network bandwidth. Besides, it shows excellent friendliness when operating simultaneously with the currently popular TCP NewReno connections.

cs.NI↗

arXiv2014

Adaptive Power Management for Wireless Base Station in Smart Grid Environment

The growing concerns of a global environmental change raises a revolution on the way of utilizing energy. In wireless industry, green wireless communications has recently gained increasing attention and is expected to play a major role in reduction of electrical power consumption. In particular, actions to promote energy saving of wireless communications with regard to environmental protection are becoming imperative. To this purpose, we study a green communication system model where wireless base station is provisioned with a combination of renewable power source and electrical grid to minimize power consumption as well as meeting the users' demand. More specifically, we focus on an adaptive power management for wireless base station to minimize power consumption under various uncertainties including renewable power generation, power price, and wireless traffic load. We believe that demand side power management solution based on the studied communication architecture is a major step towards green wireless communications.

cs.NI↗

arXiv2014

Payoff Allocation of Service Coalition in Wireless Mesh Network: A Cooperative Game Perspective

In wireless mesh network (WMN), multiple service providers (SPs) can cooperate to share resources (e.g., relay nodes and spectrum), to serve their collective subscribed customers for better service. As a reward, SPs are able to achieve more individual benefits, i.e., increased revenue or decreased cost, through efficient utilization of shared network resources. However, this cooperation can be realized only if fair allocation of aggregated payoff, which is the sum of the payoff of all the cooperative SPs, can be achieved. We first formulate such cooperation as a coalitional game with transferable utility, specifically, a linear programming game, in which, each SP should obtain the fair share of the aggregated payoff. Then we study the problem of allocating aggregated payoff which leads to stable service coalition of SPs in WMN based on the concepts of dual payoff and Shapley value.

cs.GT↗

arXiv2014

A Layered Coalitional Game Framework of Wireless Relay Network

A wireless relay network (WRN) has recently emerged as an effective way to increase communication capacity and extend a coverage area with a low cost. In the WRN, multiple service providers (SPs) can cooperate to share their resources (e.g., relay nodes and spectrum), to achieve higher utility in terms of revenue. Such cooperation can improve the capacity of the WRN, and thus throughput for terminal devices (TDs). However, this cooperation can be realized only if fair allocation of aggregated utility, which is the sum of the utility of all the cooperative SPs, can be achieved. In this paper, we investigate the WRN consisting of SPs at the upper layer and TDs at the lower layer and present a game theoretic framework to address the cooperation decision making problem in the WRN. Specifically, the cooperation of SPs is modeled as an overlapping coalition formation game, in which SPs should form a stable coalitional structure and obtain a fair share of the aggregated utility. We also study the problem of allocating aggregated utility based on the concept of Shapley value, which stabilizes the cooperation of SPs in the WRN. The cooperation of TDs is modeled as a network formation game, in which TDs establish links among each other to form a stable network structure. Numerical results demonstrate that the proposed distributed algorithm obtains the aggregated utility approximating the optimal solutions and achieves good convergence speed.

cs.NI↗