arXiv subjects

Xiaocong Li

Publications and source records attributed to Xiaocong Li.

17 recordsLinked to original sources

arXiv2026

Plug, Play, and Comply: A Modular Framework for Online Variable Impedance with Arbitrarily Oriented Compliance Axes

The paper proposes a robot-agnostic compliant-control framework that extends the ROS control ecosystem with standardized joint and Cartesian command interfaces. It addresses a key limitation of existing control software: no reusable infrastructure for implementing compliant-control algorithms across different manipulators while preserving a common interface to higher-level applications. A plugin-based architecture separates controller infrastructure from control-law implementation. Generic wrappers use existing hardware abstractions to interface with different manipulators, while runtime-loaded plugins implement only the control law. Command interfaces support joint- and Cartesian-space references, stiffness and damping gains, nullspace targets, and feedforward terms, enabling variable impedance and diverse compliant-control formulations. Robot kinematics and dynamics are computed from URDF models using Pinocchio. The architecture facilitates the development of compliant-control strategies and enables the same implementation to be deployed across platforms unchanged. The complete framework, including reference controllers, high-level task interfaces, and example configurations for various manipulators, is open-sourced. The reference Cartesian impedance controller supports task-dependent compliance by rotating translational and rotational stiffness and damping, allowing the principal compliance directions to be updated online according to local task geometry rather than remaining fixed in the robot base or TCP frame. This is particularly important in contact-rich manipulation, where the desired directions of motion, constraints, and compliance directions may vary throughout task execution. Real-robot experiments demonstrate task-dependent compliance in contact-rich manipulation, while simulations show portability across manipulators with distinct kinematic and dynamic characteristics.

cs.RO↗

arXiv2026

CoRDE: Concept-Prior Routed Diffusion Experts for Structural Generalization in Robot Manipulation

Diffusion models excel at capturing multi-modal action distributions in robot imitation learning. However, in multi-task and long-horizon scenarios, monolithic architectures lack structural generalization capabilities, suffering from gradient conflicts between distinct semantic sub-stages. While pure data-driven Mixture-of-Experts (MoE) methods introduce labor division, they frequently trigger routing collapse, and instantiating full-scale experts causes parameter explosion and high expansion costs. To address these issues, we propose Concept-prior Routed Diffusion Experts (CoRDE), a structure-guided variational distillation framework. CoRDE extracts semantic distributions from a frozen concept encoder to guide the variational posterior responsibility via a learnable soft mapping matrix. This mechanism introduces an entropy-controlled responsibility inference process that encourages confident routing under reliable semantic predictions while preserving the stochastic diffusion term for behavioral diversity. To overcome parameter inflation, CoRDE employs a parameter-efficient expert pool using Low-Rank Adaptation (LoRA) on a shared frozen backbone. Theoretical analysis shows that the mixture score discrepancy is bounded by responsibility-weighted local expert errors, supporting high-fidelity generation under low-rank expert adaptation. Empirical evaluations confirm that, compared to existing baselines, CoRDE systematically reduces routing collapse, forming robust, semantically aligned expert allocations while achieving superior action quality and incremental learning efficiency.

cs.RO↗

arXiv2026

Safe Bayesian Optimization for Complex Control Systems via Additive Gaussian Processes

Automatic controller tuning is attractive for robotics and mechatronic systems whose dynamics are difficult to model accurately, but direct black-box optimization can be unsafe because each query is executed on the physical plant. Existing safe Bayesian optimization (BO) methods provide high-probability safety guarantees, yet their practical use in multi-loop control is limited by two coupled difficulties: the controller parameter space is often moderately high-dimensional, and hardware evaluations are too expensive to allow hundreds or thousands of exploratory trials. This paper proposes \textsc{SafeCtrlBO}, a safe BO method for simultaneously tuning multiple coupled controllers. The method uses additive Gaussian-process kernels to encode low-order structure across controller gains and reduce the sample complexity associated with dense full-dimensional kernels. It also replaces the expensive potential-expander computation used in \textsc{SafeOpt}-style exploration with a boundary-based expansion rule that preserves the intended safe-set expansion behavior under explicit geometric conditions and is validated empirically. Experiments on synthetic benchmarks and on a permanent magnet synchronous motor (PMSM) speed-control platform show that \textsc{SafeCtrlBO} reaches high-performing controller parameters with fewer hardware evaluations than representative safe BO baselines, while maintaining the prescribed high-probability safety criterion and avoiding violations of the hard signal-safety constraint in the hardware study. The code implementation is publicly available at https://github.com/hxwangnus/SafeCtrlBO.

cs.RO↗

arXiv2026

FD-VLA: Force-Distilled Vision-Language-Action Model for Contact-Rich Manipulation

Force sensing is a crucial modality for Vision-Language-Action (VLA) frameworks, as it enables fine-grained perception and dexterous manipulation in contact-rich tasks. We present Force-Distilled VLA (FD-VLA), a novel framework that integrates force awareness into contact-rich manipulation without relying on physical force sensors. The core of our approach is a Force Distillation Module (FDM), which distills force by mapping a learnable query token, conditioned on visual observations and robot states, into a predicted force token aligned with the latent representation of actual force signals. During inference, this distilled force token is injected into the pretrained VLM, enabling force-aware reasoning while preserving the integrity of its vision-language semantics. This design provides two key benefits: first, it allows practical deployment across a wide range of robots that lack expensive or fragile force-torque sensors, thereby reducing hardware cost and complexity; second, the FDM introduces an additional force-vision-state fusion prior to the VLM, which improves cross-modal alignment and enhances perception-action robustness in contact-rich scenarios. Surprisingly, our physical experiments show that the distilled force token outperforms direct sensor force measurements as well as other baselines, which highlights the effectiveness of this force-distilled VLA approach.

cs.RO↗

arXiv2025

Opinion: Towards Unified Expressive Policy Optimization for Robust Robot Learning

Offline-to-online reinforcement learning (O2O-RL) has emerged as a promising paradigm for safe and efficient robotic policy deployment but suffers from two fundamental challenges: limited coverage of multimodal behaviors and distributional shifts during online adaptation. We propose UEPO, a unified generative framework inspired by large language model pretraining and fine-tuning strategies. Our contributions are threefold: (1) a multi-seed dynamics-aware diffusion policy that efficiently captures diverse modalities without training multiple models; (2) a dynamic divergence regularization mechanism that enforces physically meaningful policy diversity; and (3) a diffusion-based data augmentation module that enhances dynamics model generalization. On the D4RL benchmark, UEPO achieves +5.9\% absolute improvement over Uni-O4 on locomotion tasks and +12.4\% on dexterous manipulation, demonstrating strong generalization and scalability.

cs.RO↗

arXiv2025

A Dual Large Language Models Architecture with Herald Guided Prompts for Parallel Fine Grained Traffic Signal Control

Leveraging large language models (LLMs) in traffic signal control (TSC) improves optimization efficiency and interpretability compared to traditional reinforcement learning (RL) methods. However, existing LLM-based approaches are limited by fixed time signal durations and are prone to hallucination errors, while RL methods lack robustness in signal timing decisions and suffer from poor generalization. To address these challenges, this paper proposes HeraldLight, a dual LLMs architecture enhanced by Herald guided prompts. The Herald Module extracts contextual information and forecasts queue lengths for each traffic phase based on real-time conditions. The first LLM, LLM-Agent, uses these forecasts to make fine grained traffic signal control, while the second LLM, LLM-Critic, refines LLM-Agent's outputs, correcting errors and hallucinations. These refined outputs are used for score-based fine-tuning to improve accuracy and robustness. Simulation experiments using CityFlow on real world datasets covering 224 intersections in Jinan (12), Hangzhou (16), and New York (196) demonstrate that HeraldLight outperforms state of the art baselines, achieving a 20.03% reduction in average travel time across all scenarios and a 10.74% reduction in average queue length on the Jinan and Hangzhou scenarios. The source code is available on GitHub: https://github.com/BUPT-ANTlab/HeraldLight.

cs.LG↗

arXiv2025

Semantic-LiDAR-Inertial-Wheel Odometry Fusion for Robust Localization in Large-Scale Dynamic Environments

Reliable, drift-free global localization presents significant challenges yet remains crucial for autonomous navigation in large-scale dynamic environments. In this paper, we introduce a tightly-coupled Semantic-LiDAR-Inertial-Wheel Odometry fusion framework, which is specifically designed to provide high-precision state estimation and robust localization in large-scale dynamic environments. Our framework leverages an efficient semantic-voxel map representation and employs an improved scan matching algorithm, which utilizes global semantic information to significantly reduce long-term trajectory drift. Furthermore, it seamlessly fuses data from LiDAR, IMU, and wheel odometry using a tightly-coupled multi-sensor fusion Iterative Error-State Kalman Filter (iESKF). This ensures reliable localization without experiencing abnormal drift. Moreover, to tackle the challenges posed by terrain variations and dynamic movements, we introduce a 3D adaptive scaling strategy that allows for flexible adjustments to wheel odometry measurement weights, thereby enhancing localization precision. This study presents extensive real-world experiments conducted in a one-million-square-meter automated port, encompassing 3,575 hours of operational data from 35 Intelligent Guided Vehicles (IGVs). The results consistently demonstrate that our system outperforms state-of-the-art LiDAR-based localization methods in large-scale dynamic environments, highlighting the framework's reliability and practical value.

cs.RO↗

arXiv2025

DuLoc: Life-Long Dual-Layer Localization in Changing and Dynamic Expansive Scenarios

LiDAR-based localization serves as a critical component in autonomous systems, yet existing approaches face persistent challenges in balancing repeatability, accuracy, and environmental adaptability. Traditional point cloud registration methods relying solely on offline maps often exhibit limited robustness against long-term environmental changes, leading to localization drift and reliability degradation in dynamic real-world scenarios. To address these challenges, this paper proposes DuLoc, a robust and accurate localization method that tightly couples LiDAR-inertial odometry with offline map-based localization, incorporating a constant-velocity motion model to mitigate outlier noise in real-world scenarios. Specifically, we develop a LiDAR-based localization framework that seamlessly integrates a prior global map with dynamic real-time local maps, enabling robust localization in unbounded and changing environments. Extensive real-world experiments in ultra unbounded port that involve 2,856 hours of operational data across 32 Intelligent Guided Vehicles (IGVs) are conducted and reported in this study. The results attained demonstrate that our system outperforms other state-of-the-art LiDAR localization systems in large-scale changing outdoor environments.

cs.RO↗

arXiv2024

Robotic Control Optimization Through Kernel Selection in Safe Bayesian Optimization

Control system optimization has long been a fundamental challenge in robotics. While recent advancements have led to the development of control algorithms that leverage learning-based approaches, such as SafeOpt, to optimize single feedback controllers, scaling these methods to high-dimensional complex systems with multiple controllers remains an open problem. In this paper, we propose a novel learning-based control optimization method, which enhances the additive Gaussian process-based Safe Bayesian Optimization algorithm to efficiently tackle high-dimensional problems through kernel selection. We use PID controller optimization in drones as a representative example and test the method on Safe Control Gym, a benchmark designed for evaluating safe control techniques. We show that the proposed method provides a more efficient and optimal solution for high-dimensional control optimization problems, demonstrating significant improvements over existing techniques.

cs.RO↗

arXiv2023

Data-Driven Linear Quadratic Optimization for Controller Synthesis with Structural Constraints

For various typical cases and situations where the formulation results in an optimal control problem, the Linear Quadratic Regulator (LQR) approach and its variants continue to be highly attractive. In certain scenarios, it can happen that some prescribed structural constraints on the gain matrix would arise. Consequently then, the Algebraic Riccati Equation (ARE) is no longer applicable in a straightforward way to obtain the optimal solution. This work presents a rather effective alternative optimization approach based on gradient projection. The utilized gradient is obtained through a data-driven methodology, and then projected onto applicable constrained hyperplanes. Essentially, this projection gradient determines a direction of progression and computation for the gain matrix update with a decreasing functional cost; and then the gain matrix is further refined in an iterative framework. With this formulation, a data-driven optimization algorithm is summarized for controller synthesis with structural constraints. This data-driven approach has the key advantage that it avoids the necessity of precise modeling which is always required in the classical model-based counterpart; and thus the approach can additionally accommodate various model uncertainties. Illustrative examples are also provided in the work to validate the theoretical results.

math.OC↗

arXiv2022

Robust Fixed-Order Controller Design for Uncertain Systems with Generalized Common Lyapunov Strictly Positive Realness Characterization

This paper investigates the design of a robust fixed-order controller for single-input-single-output (SISO) polytopic systems with interval uncertainties, with the aim that the closed-loop stability is appropriately ensured and the performance specifications on sensitivity shaping are conformed in a specific finite frequency range. Utilizing the notion of generalized common Lyapunov strictly positive realness (CL-SPRness), the equivalence between strictly positive realness (SPRness) and strictly bounded realness (SBRness) is established; and then the specifications on robust stability and performance are transformed into the SPRness of newly constructed systems and further characterized in the framework of linear matrix inequality (LMI) conditions. The proposed methodology avoids the tedious yet mandatory evaluations of the specifications on all vertices of the uncertain polytopic system in an explicit form. Instead, solving five LMIs exclusively suffices for ensuring the robust stability and performance regardless of the number of vertices, and thus the typically heavy computational burden is considerably alleviated. It is also noteworthy that the proposed methodology additionally provides the necessary and sufficient conditions for this robust controller design with the consideration of a prescribed finite frequency range, and therefore significantly less conservatism is attained in the system performance.

eess.SY↗

arXiv2022

Second-Order Non-Convex Optimization for Constrained Fixed-Structure Static Output Feedback Controller Synthesis

For linear time-invariant (LTI) systems, the design of an optimal controller is a commonly encountered problem in many applications. Among all the optimization approaches available, the linear quadratic regulator (LQR) methodology certainly garners much attention and interest. As is well-known, standard numerical tools in linear algebra are readily available which enable the determination of the optimal static LQR feedback gain matrix when all the system state variables are measurable. However, in various certain scenarios where some of the system state variables are not measurable, and consequent prescribed structural constraints on the controller structure arise, the optimization problem can become intractable due to the non-convexity characteristics that can then be present. In such cases, there have been some first-order methods proposed to cater to these problems, but all of these first-order optimization methods, if at all successful, are limited to only linear convergence. To speed up the convergence, a second-order approach in the matrix space is essential, with appropriate methodology to solve the linear equality constrained static output feedback (SOF) problem with a suitably defined linear quadratic cost function. Thus along this line, in this work, an efficient method is proposed in the matrix space to calculate the Hessian matrix by solving several Lyapunov equations. Then a new optimization technique is applied to deal with the indefiniteness of the Hessian matrix. Subsequently, through Newton's method with linear equality constraints, a second-order optimization algorithm is developed to effectively solve the constrained SOF LQR problem. Finally, two numerical examples are described which demonstrate the applicability and effectiveness of the proposed method.

math.OC↗

arXiv2021

Convex Parameterization and Optimization for Robust Tracking of a Magnetically Levitated Planar Positioning System

Magnetic levitation positioning technology has attracted considerable research efforts and dedicated attention due to its extremely attractive features. The technology offers high-precision, contactless, dust/lubricant-free, multi-axis, and large-stroke positioning. In this work, we focus on the accurate and smooth tracking problem of a multi-axis magnetically levitated (maglev) planar positioning system for a specific S-curve reference trajectory. The floating characteristics and the multi-axis coupling make accurate identification of the system dynamics difficult, which lead to a challenge to design a high performance control system. Here, the tracking task is achieved by a 2-Degree of Freedom (DoF) controller consisting of a feedforward controller and a robust stabilizing feedback controller with a prescribed sparsity pattern. The approach proposed in this paper utilizes the basis of an H-infinity controller formulation and a suitably established convex inner approximation. Particularly, a subset of robust stabilizable controllers with prescribed structural constraints is characterized in the parameter space, and so thus the re-formulated convex optimization problem can be easily solved by several powerful numerical algorithms and solvers. With this approach, the robust stability of the overall system is ensured with a satisfactory system performance despite the presence of parametric uncertainties. Furthermore, experimental results clearly demonstrate the effectiveness of the proposed approach.

eess.SY↗

arXiv2021

Global Iterative Sliding Mode Control of an Industrial Biaxial Gantry System for Contouring Motion Tasks

This paper proposes a global iterative sliding mode control approach for high-precision contouring tasks of a flexure-linked biaxial gantry system. For such high-precision contouring tasks, it is the typical situation that the involved multi-axis cooperation is one of the most challenging problems. As also would be inevitably encountered, various factors render the multi-axis cooperation rather difficult; such as the strong coupling (which naturally brings nonlinearity) between different axes due to its mechanical structure, the backlash and deadzone caused by the friction, and the difficulties in system identification, etc. To overcome the above-mentioned issues, this work investigates an intelligent model-free contouring control method for such a multi-axis motion stage. Essentially in the methodology developed here, it is firstly ensured that all the coupling, friction, nonlinearity, and disturbance (regarded as uncertain dynamics in each axis) are suitably posed as `uncertainties'. Then, a varying-gain sliding mode control method is proposed to adaptively compensate for the matched unknown dynamics in the time domain, while an iterative learning law is applied to suppress the undesirable effects (arising from the repetitive matched and unmatched uncertainties in the iteration domain). With this approach, the chattering that typically results from the overestimated control gains in the sliding mode control is thus suppressed during the iterations. To analyze the contouring performance and show the improved outcomes, rigorous proof is furnished on both the stability in the time domain and the convergence in the iteration domain; and the real-time experiments also illustrate that the requirements of precision motion control towards high-speed and complex-curvature references can be satisfied using the proposed method, without prior knowledge of the boundary to the unknown dynamics.

eess.SY↗

arXiv2021

Generalized Iterative Super-Twisting Sliding Mode Control: A Case Study on Flexure-Joint Dual-Drive H-Gantry Stage

Mechatronic systems are commonly used in the industry, where fast and accurate motion performance is always required to guarantee manufacturing precision and efficiency. Nevertheless, the system model and parameters are difficult to be obtained accurately. Moreover, the high-order modes, strong coupling in the multi-axis systems, or unmodeled frictions will bring uncertain dynamics to the system. To overcome the above-mentioned issues and enhance the motion performance, this paper introduces a novel intelligent and totally model-free control method for mechatronic systems with unknown dynamics. In detail, a 2-degree-of-freedom (DOF) architecture is designed, which organically merges a generalized super-twisting algorithm with a unique iterative learning law. The controller solely utilizes the input-output data collected in iterations such that it works without any knowledge of the system parameters. The rigorous proof of convergence ability is given and a case study on flexture-joint dual-drive H-gantry stage is shown to validate the effectiveness of the proposed method.

eess.SY↗

arXiv2020

Grasping Detection Network with Uncertainty Estimation for Confidence-Driven Semi-Supervised Domain Adaptation

Data-efficient domain adaptation with only a few labelled data is desired for many robotic applications, e.g., in grasping detection, the inference skill learned from a grasping dataset is not universal enough to directly apply on various other daily/industrial applications. This paper presents an approach enabling the easy domain adaptation through a novel grasping detection network with confidence-driven semi-supervised learning, where these two components deeply interact with each other. The proposed grasping detection network specially provides a prediction uncertainty estimation mechanism by leveraging on Feature Pyramid Network (FPN), and the mean-teacher semi-supervised learning utilizes such uncertainty information to emphasizing the consistency loss only for those unlabelled data with high confidence, which we referred it as the confidence-driven mean teacher. This approach largely prevents the student model to learn the incorrect/harmful information from the consistency loss, which speeds up the learning progress and improves the model accuracy. Our results show that the proposed network can achieve high success rate on the Cornell grasping dataset, and for domain adaptation with very limited data, the confidence-driven mean teacher outperforms the original mean teacher and direct training by more than 10% in evaluation loss especially for avoiding the overfitting and model diverging.

cs.CV↗

arXiv2020

Data-Driven Multi-Objective Controller Optimization for a Magnetically-Levitated Nanopositioning System

The performance achieved with traditional model-based control system design approaches typically relies heavily upon accurate modeling of the motion dynamics. However, modeling the true dynamics of present-day increasingly complex systems can be an extremely challenging task; and the usually necessary practical approximations often render the automation system to operate in a non-optimal condition. This problem can be greatly aggravated in the case of a multi-axis magnetically-levitated nanopositioning system where the fully floating behavior and multi-axis coupling make extremely accurate identification of the motion dynamics largely impossible. On the other hand, in many related industrial automation applications, e.g., the scanning process with the maglev system, repetitive motions are involved which could generate a large amount of motion data under non-optimal conditions. These motion data essentially contain rich information; therefore, the possibility exists to develop an intelligent automation system to learn from these motion data and to drive the system to operate towards optimality in a data-driven manner. Along this line then, this paper proposes a data-driven controller optimization approach that learns from the past non-optimal motion data to iteratively improve the motion control performance. Specifically, a novel data-driven multi-objective optimization approach is proposed that is able to automatically estimate the gradient and Hessian purely based on the measured motion data; the multi-objective cost function is suitably designed to take into account both smooth and accurate trajectory tracking. Experiments are then conducted on the maglev nanopositioning system to demonstrate the effectiveness of the proposed method, and the results show rather clearly the practical appeal of our methodology for related complex robotic systems with no accurate model available.

eess.SY↗