arXiv subjects

Xiaodan Shao

Publications and source records attributed to Xiaodan Shao.

At least 55 records · Page 3Linked to original sources

arXiv2024

6DMA Enhanced Wireless Network with Flexible Antenna Position and Rotation: Opportunities and Challenges

6DMA (six-dimensional movable antenna) is a new and revolutionizing technology that fully exploits the wireless channel spatial variation at the transmitter/receiver by flexibly adjusting the three-dimensional (3D) positions and 3D rotations of distributed antennas/antenna surfaces (arrays). In this article, we provide an overview of 6DMA for unveiling its great potential in wireless networks, including its motivation and competitive advantages over existing technologies, system/channel modeling, and practical implementation. In particular, we present a variety of 6DMA-enabled performance enhancement in terms of array gain, spatial multiplexing, interference suppression, and geometric gain. Furthermore, we illustrate the main applications of 6DMA in wireless communication and sensing, and elaborate their design challenges as well as promising solutions. Finally, numerical results are provided to demonstrate the significant capacity improvement of 6DMA-aided communication in wireless network.

cs.IT↗

arXiv2024

Networked Integrated Sensing and Communications for 6G Wireless Systems

Integrated sensing and communication (ISAC) is envisioned as a key pillar for enabling the upcoming sixth generation (6G) communication systems, requiring not only reliable communication functionalities but also highly accurate environmental sensing capabilities. In this paper, we design a novel networked ISAC framework to explore the collaboration among multiple users for environmental sensing. Specifically, multiple users can serve as powerful sensors, capturing back scattered signals from a target at various angles to facilitate reliable computational imaging. Centralized sensing approaches are extremely sensitive to the capability of the leader node because it requires the leader node to process the signals sent by all the users. To this end, we propose a two-step distributed cooperative sensing algorithm that allows low-dimensional intermediate estimate exchange among neighboring users, thus eliminating the reliance on the centralized leader node and improving the robustness of sensing. This way, multiple users can cooperatively sense a target by exploiting the block-wise environment sparsity and the interference cancellation technique. Furthermore, we analyze the mean square error of the proposed distributed algorithm as a networked sensing performance metric and propose a beamforming design for the proposed network ISAC scheme to maximize the networked sensing accuracy and communication performance subject to a transmit power constraint. Simulation results validate the effectiveness of the proposed algorithm compared with the state-of-the-art algorithms.

eess.SP↗

arXiv2024

Capacity Maximization for Base Station with Hybrid Fixed and Movable Antennas

Six-dimensional movable antenna (6DMA) is an effective solution for enhancing wireless network capacity through the adjustment of both 3D positions and 3D rotations of distributed antennas/antenna surfaces. Although freely positioning/rotating 6DMA surfaces offers the greatest flexibility and thus highest capacity improvement, its implementation may be challenging in practice due to the drastic architecture change required for existing base stations (BSs), which predominantly adopt fixed-position antenna (FPA) arrays (e.g., sector antenna arrays). Thus, we introduce in this letter a new BS architecture called hybrid fixed and movable antennas (HFMA), which consists of both conventional FPA arrays and position/rotation-adjustable 6DMA surfaces. For ease of implementation, we consider that all 6DMA surfaces can rotate along a circular track above the FPA arrays. We aim to maximize the network capacity via optimizing the rotation angles of all 6DMA surfaces based on the users' spatial distribution. Since this problem is combinatorial and its optimal solution requires prohibitively high computational complexity via exhaustive search, we propose an alternative adaptive Markov Chain Monte Carlo based method to solve it more efficiently. Finally, we present simulation results that show significant performance gains achieved by our proposed design over various benchmark schemes.

cs.IT↗

arXiv2024

Intelligent Reflecting Surface-Aided Radar Spoofing

Electronic countermeasure (ECM) technology plays a critical role in modern electronic warfare, which can interfere with enemy radar detection systems by noise or deceptive signals. However, the conventional active jamming strategy incurs additional hardware and power costs and has the potential threat of exposing the target itself. To tackle the above challenges, we propose a new intelligent reflecting surface (IRS)-aided radar spoofing strategy in this letter, where IRS is deployed on the surface of a target to help eliminate the signals reflected towards the hostile radar to shield the target, while simultaneously redirecting its reflected signal towards a surrounding clutter to generate deceptive angle-of-arrival (AoA) sensing information for the radar. We optimize the IRS's reflection to maximize the received signal power at the radar from the direction of the selected clutter subject to the constraint that its received power from the direction of the target is lower than a given detection threshold. We first solve this non-convex optimization problem using the semidefinite relaxation (SDR) method and further propose a lower-complexity solution for real-time implementation. Simulation results validate the efficacy of our proposed IRS-aided spoofing system as compared to various benchmark schemes.

cs.IT↗

arXiv2024

6D Movable Antenna Based on User Distribution: Modeling and Optimization

In this paper, we propose a new six-dimensional (6D) movable antenna (6DMA) system for future wireless networks to improve the communication performance. Unlike the traditional fixed-position antenna (FPA) and existing fluid antenna/two-dimensional (2D) movable antenna (FA/2DMA) systems that adjust the positions of antennas only, the proposed 6DMA system consists of distributed antenna surfaces with independently adjustable three-dimensional (3D) positions as well as 3D rotations within a given space. In particular, this paper applies the 6DMA to the base station (BS) in wireless networks to provide full degrees of freedom (DoFs) for the BS to adapt to the dynamic user spatial distribution in the network. However, a challenging new problem arises on how to optimally control the 6D positions and rotations of all 6DMA surfaces at the BS to maximize the network capacity based on the user spatial distribution, subject to the practical constraints on 6D antennas' movement. To tackle this problem, we first model the 6DMA-enabled BS and the user channels with the BS in terms of 6D positions and rotations of all 6DMA surfaces. Next, we propose an efficient alternating optimization algorithm to search for the best 6D positions and rotations of all 6DMA surfaces by leveraging the Monte Carlo simulation technique. Specifically, we sequentially optimize the 3D position/3D rotation of each 6DMA surface with those of the other surfaces fixed in an iterative manner. Numerical results show that our proposed 6DMA-BS can significantly improve the network capacity as compared to the benchmark BS architectures with FPAs or 6DMAs with limited/partial movability, especially when the user distribution is more spatially non-uniform.

cs.IT↗

arXiv2024

6D Movable Antenna Enhanced Wireless Network Via Discrete Position and Rotation Optimization

Six-dimensional movable antenna (6DMA) is an effective approach to improve wireless network capacity by adjusting the 3D positions and 3D rotations of distributed antenna surfaces based on the users' spatial distribution and statistical channel information. Although continuously positioning/rotating 6DMA surfaces can achieve the greatest flexibility and thus the highest capacity improvement, it is difficult to implement due to the discrete movement constraints of practical stepper motors. Thus, in this paper, we consider a 6DMA-aided base station (BS) with only a finite number of possible discrete positions and rotations for the 6DMA surfaces. We aim to maximize the average network capacity for random numbers of users at random locations by jointly optimizing the 3D positions and 3D rotations of multiple 6DMA surfaces at the BS subject to discrete movement constraints. In particular, we consider the practical cases with and without statistical channel knowledge of the users, and propose corresponding offline and online optimization algorithms, by leveraging the Monte Carlo and conditional sample mean (CSM) methods, respectively. Simulation results verify the effectiveness of our proposed offline and online algorithms for discrete position/rotation optimization of 6DMA surfaces as compared to various benchmark schemes with fixed-position antennas (FPAs) and 6DMAs with limited movability. It is shown that 6DMA-BS can significantly enhance wireless network capacity, even under discrete position/rotation constraints, by exploiting the spatial distribution characteristics of the users.

cs.IT↗

arXiv2024

Intelligent Surfaces Empowered Wireless Network: Recent Advances and The Road to 6G

Intelligent surfaces (ISs) have emerged as a key technology to empower a wide range of appealing applications for wireless networks, due to their low cost, high energy efficiency, flexibility of deployment and capability of constructing favorable wireless channels/radio environments. Moreover, the recent advent of several new IS architectures further expanded their electromagnetic functionalities from passive reflection to active amplification, simultaneous reflection and refraction, as well as holographic beamforming. However, the research on ISs is still in rapid progress and there have been recent technological advances in ISs and their emerging applications that are worthy of a timely review. Thus, we provide in this paper a comprehensive survey on the recent development and advances of ISs aided wireless networks. Specifically, we start with an overview on the anticipated use cases of ISs in future wireless networks such as 6G, followed by a summary of the recent standardization activities related to ISs. Then, the main design issues of the commonly adopted reflection-based IS and their state-of-the-art solutions are presented in detail, including reflection optimization, deployment, signal modulation, wireless sensing, and integrated sensing and communications. Finally, recent progress and new challenges in advanced IS architectures are discussed to inspire futrue research.

cs.IT↗

arXiv2024

IRS Aided Millimeter-Wave Sensing and Communication: Beam Scanning, Beam Splitting, and Performance Analysis

Integrated sensing and communication (ISAC) has attracted growing interests for enabling the future 6G wireless networks, due to its capability of sharing spectrum and hardware resources between communication and sensing systems. However, existing works on ISAC usually need to modify the communication protocol to cater for the new sensing performance requirement, which may be difficult to implement in practice. In this paper, we study a new intelligent reflecting surface (IRS) aided millimeter-wave (mmWave) ISAC system by exploiting the distinct beam scanning operation in mmWave communications to achieve efficient sensing at the same time. First, we propose a two-phase ISAC protocol aided by a semi-passive IRS, consisting of beam scanning and data transmission. Specifically, in the beam scanning phase, the IRS finds the optimal beam for reflecting signals from the base station to a communication user via its passive elements. Meanwhile, the IRS directly estimates the angle of a nearby target based on echo signals from the target using its equipped active sensing element. Then, in the data transmission phase, the sensing accuracy is further improved by leveraging the data signals via possible IRS beam splitting. Next, we derive the achievable rate of the communication user as well as the Cramér-Rao bound and the approximate mean square error of the target angle estimation Finally, extensive simulation results are provided to verify our analysis as well as the effectiveness of the proposed scheme.

cs.IT↗

arXiv2023

Target-Mounted Intelligent Reflecting Surface for Secure Wireless Sensing

In this paper, we consider a challenging secure wireless sensing scenario where a legitimate radar station (LRS) intends to detect a target at unknown location in the presence of an unauthorized radar station (URS). We aim to enhance the sensing performance of the LRS and in the meanwhile prevent the detection of the same target by the URS. Under this setup, conventional stealth-based approaches such as wrapping the target with electromagnetic wave absorbing materials are not applicable, since they will disable the target detection by not only the URS, but the LRS as well. To tackle this challenge, we propose in this paper a new target-mounted IRS approach, where intelligent reflecting surface (IRS) is mounted on the outer/echo surface of the target and by tuning the IRS reflection, the strength of its reflected radar signal in any angle of departure (AoD) can be adjusted based on the signal's angle of arrival (AoA), thereby enhancing/suppressing the signal power towards the LRS/URS, respectively. To this end, we propose a practical protocol for the target-mounted IRS to estimate the LRS/URS channel and waveform parameters based on its sensed signals and control the IRS reflection for/against the LRS/URS accordingly. Specifically, we formulate new optimization problems to design the reflecting phase shifts at IRS for maximizing the received signal power at the LRS while keeping that at the URS below a certain level, for both the cases of short-term and long-term IRS operations with different dynamic reflection capabilities. To solve these non-convex problems, we apply the penalty dual decomposition method to obtain high-quality suboptimal solutions for them efficiently. Finally, simulation results are presented that verify the effectiveness of the proposed protocol and algorithms for the target-mounted IRS to achieve secure wireless sensing, as compared with various benchmark schemes.

cs.IT↗

arXiv2023

Beam Scanning for Integrated Sensing and Communication in IRS-aided mmWave Systems

This paper investigates an intelligent reflecting surface (IRS) aided millimeter-wave integrated sensing and communication (ISAC) system. Specifically, based on the passive beam scanning in the downlink, the IRS finds the optimal beam for reflecting the signals from the base station to a communication user. Meanwhile, the IRS estimates the angle of a nearby target based on its echo signal received by the sensing elements mounted on the IRS (i.e., semi-passive IRS). We propose an ISAC protocol for achieving the above objective via simultaneous (beam) training and sensing (STAS). Then, we derive the achievable rate of the communication user and the Cramer-Rao bound (CRB) of the angle estimation for the sensing target in closed-form. The achievable rate and CRB exhibit different performance against the duration of beam scanning. Specifically, the average achievable rate initially rises and subsequently declines, while the CRB monotonically decreases. Consequently, the duration of beam scanning should be carefully selected to balance communication and sensing performance. Simulation results have verified our analytical findings and shown that, thanks to the efficient use of downlink beam scanning signal for simultaneous communication and target sensing, the STAS protocol outperforms the benchmark protocol with orthogonal beam training and sensing.

cs.IT↗

arXiv2023

Intelligent Reflecting Surface Aided Wireless Sensing: Applications and Design Issues

Intelligent reflecting surface (IRS) is an emerging technology that is able to significantly improve the performance of wireless communications, by smartly tuning signal reflections at a large number of passive reflecting elements. On the other hand, with ubiquitous wireless devices and ambient radio-frequency signals, wireless sensing has become a promising new application for the next-generation/6G wireless networks. By synergizing low-cost IRS and fertile wireless sensing applications, this article proposes a new IRS-aided sensing paradigm for enhancing the performance of wireless sensing cost-effectively. First, we provide an overview of wireless sensing applications and the new opportunities of utilizing IRS for overcoming their performance limitations in practical scenarios. Next, we discuss IRS-aided sensing schemes based on three approaches, namely, passive sensing, semi-passive sensing, and active sensing. We compare their pros and cons in terms of performance, hardware cost and implementation complexity, and outline their main design issues including IRS deployment, channel acquisition and reflection design, as well as sensing algorithms. Finally, numerical results are presented to demonstrate the great potential of IRS for improving wireless sensing accuracy and the superior performance of IRS active sensing compared to other schemes.

eess.SP↗

arXiv2022

Exploiting Tensor-based Bayesian Learning for Massive Grant-Free Random Access in LEO Satellite Internet of Things

With the rapid development of Internet of Things (IoT), low earth orbit (LEO) satellite IoT is expected to provide low power, massive connectivity and wide coverage IoT applications. In this context, this paper provides a massive grant-free random access (GF-RA) scheme for LEO satellite IoT. This scheme does not need to change the transceiver, but transforms the received signal to a tensor decomposition form. By exploiting the characteristics of the tensor structure, a Bayesian learning algorithm for joint active device detection and channel estimation during massive GF-RA is designed. Theoretical analysis shows that the proposed algorithm has fast convergence and low complexity. Finally, extensive simulation results confirm its better performance in terms of error probability for active device detection and normalized mean square error for channel estimation over baseline algorithms in LEO satellite IoT. Especially, it is found that the proposed algorithm requires short preamble sequences and support massive connectivity with a low power, which is appealing to LEO satellite IoT.

cs.IT↗

arXiv2022

Reconfigurable Intelligent Surface-Aided 6G Massive Access: Coupled Tensor Modeling and Sparse Bayesian Learning

This paper investigates a reconfigurable intelligent surface (RIS)-aided unsourced random access (URA) scheme for the sixth-generation (6G) wireless networks with massive sporadic traffic devices. First of all, this paper proposes a novel joint active device separation (the message recovery of active device) and channel estimation architecture for the RIS-aided URA. Specifically, the RIS passive reflection is optimized before the successful device separation. Then, by associating the data sequences to multiple rank-one tensors and exploiting the angular sparsity of the RIS-BS channel, the detection problem is cast as a high-order coupled tensor decomposition problem without the need of exploiting pilot sequences. However, the inherent coupling among multiple sparse device-RIS channels, together with the unknown number of active devices make the detection problem at hand deviate from the widely-used coupled tensor decomposition format. To overcome this challenge, this paper judiciously devises a probabilistic model that captures both the element-wise sparsity from the angular channel model and the low-rank property due to the sporadic nature of URA. Then, based on such a probabilistic model, a iterative detection algorithm is developed under the framework of sparse variational inference, where each update iteration is obtained in a closed-form and the number of active devices can be automatically estimated for effectively avoiding the overfitting of noise. Extensive simulation results confirm the excellence of the proposed URA algorithm, especially for the case of a large number of reflecting elements for accommodating a significantly large number of devices.

eess.SP↗

arXiv2022

Target Sensing with Intelligent Reflecting Surface: Architecture and Performance

Intelligent reflecting surface (IRS) has emerged as a promising technology to reconfigure the radio propagation environment by dynamically controlling wireless signal's amplitude and/or phase via a large number of reflecting elements. In contrast to the vast literature on studying IRS's performance gains in wireless communications, we study in this paper a new application of IRS for sensing/localizing targets in wireless networks. Specifically, we propose a new self-sensing IRS architecture where the IRS controller is capable of transmitting probing signals that are not only directly reflected by the target (referred to as the direct echo link), but also consecutively reflected by the IRS and then the target (referred to as the IRS-reflected echo link). Moreover, dedicated sensors are installed at the IRS for receiving both the direct and IRS-reflected echo signals from the target, such that the IRS can sense the direction of its nearby target by applying a customized multiple signal classification (MUSIC) algorithm. However, since the angle estimation mean square error (MSE) by the MUSIC algorithm is intractable, we propose to optimize the IRS passive reflection for maximizing the average echo signals' total power at the IRS sensors and derive the resultant Cramer-Rao bound (CRB) of the angle estimation MSE. Last, numerical results are presented to show the effectiveness of the proposed new IRS sensing architecture and algorithm, as compared to other benchmark sensing systems/algorithms.

eess.SP↗

arXiv2021

Exploiting Simultaneous Low-Rank and Sparsity in Delay-Angular Domain for Millimeter-Wave/Terahertz Wideband Massive Access

Millimeter-wave (mmW)/Terahertz (THz) wideband communication employing a large-scale antenna array is a promising technique of the sixth-generation (6G) wireless network for realizing massive machine-type communications (mMTC). To reduce the access latency and the signaling overhead, we design a grant-free random access scheme based on joint active device detection and channel estimation (JADCE) for mmW/THz wideband massive access. In particular, by exploiting the simultaneously sparse and low-rank structure of mmW/THz channels with spreads in the delay-angular domain, we propose two multi-rank aware JADCE algorithms via applying the quotient geometry of product of complex rank-$L$ matrices with the number of clusters $L$. It is proved that the proposed algorithms require a smaller number of measurements than the currently known bounds on measurements of conventional simultaneously sparse and low-rank recovery algorithms. Statistical analysis also shows that the proposed algorithms can linearly converge to the ground truth with low computational complexity. Finally, extensive simulation results confirm the superiority of the proposed algorithms in terms of the accuracy of both activity detection and channel estimation.

cs.IT↗

arXiv2021

A Bayesian Tensor Approach to Enable RIS for 6G Massive Unsourced Random Access

This paper investigates the problem of joint massive devices separation and channel estimation for a reconfigurable intelligent surface (RIS)-aided unsourced random access (URA) scheme in the sixth-generation (6G) wireless networks. In particular, by associating the data sequences to a rank-one tensor and exploiting the angular sparsity of the channel, the detection problem is cast as a high-order coupled tensor decomposition problem. However, the coupling among multiple devices to RIS (device-RIS) channels together with their sparse structure make the problem intractable. By devising novel priors to incorporate problem structures, we design a novel probabilistic model to capture both the element-wise sparsity from the angular channel model and the low rank property due to the sporadic nature of URA. Based on the this probabilistic model, we develop a coupled tensor-based automatic detection (CTAD) algorithm under the framework of variational inference with fast convergence and low computational complexity. Moreover, the proposed algorithm can automatically learn the number of active devices and thus effectively avoid noise overfitting. Extensive simulation results confirm the effectiveness and improvements of the proposed URA algorithm in large-scale RIS regime.

cs.IT↗

arXiv2020

Feature-Aided Adaptive-Tuning Deep Learning for Massive Device Detection

With the increasing development of Internet of Things (IoT), the upcoming sixth-generation (6G) wireless network is required to support grant-free random access of a massive number of sporadic traffic devices. In particular, at the beginning of each time slot, the base station (BS) performs joint activity detection and channel estimation (JADCE) based on the received pilot sequences sent from active devices. Due to the deployment of a large-scale antenna array and the existence of a massive number of IoT devices, conventional JADCE approaches usually have high computational complexity and need long pilot sequences. To solve these challenges, this paper proposes a novel deep learning framework for JADCE in 6G wireless networks, which contains a dimension reduction module, a deep learning network module, an active device detection module, and a channel estimation module. Then, prior-feature learning followed by an adaptive-tuning strategy is proposed, where an inner network composed of the Expectation-maximization (EM) and back-propagation is introduced to jointly tune the precision and learn the distribution parameters of the device state matrix. Finally, by designing the inner layer-by-layer and outer layer-by-layer training method, a feature-aided adaptive-tuning deep learning network is built. Both theoretical analysis and simulation results confirm that the proposed deep learning framework has low computational complexity and needs short pilot sequences in practical scenarios.

cs.IT↗

arXiv2020

Cooperative Activity Detection: Sourced and Unsourced Massive Random Access Paradigms

This paper investigates the issue of cooperative activity detection for grant-free random access in the sixth-generation (6G) cell-free wireless networks with sourced and unsourced paradigms. First, we propose a cooperative framework for solving the problem of device activity detection in sourced random access. In particular, multiple access points (APs) cooperatively detect the device activity via exchanging low-dimensional intermediate information with their neighbors. This is enabled by the proposed covariance-based algorithm via exploiting both the sparsity-promoting and similarity-promoting terms of the device state vectors among neighboring APs. A decentralized approximate separating approach is introduced based on the forward-backward splitting strategy for addressing the formulated problem. Then, the proposed activity detection algorithm is adopted as a decoder of cooperative unsourced random access, where the multiple APs cooperatively detect the list of transmitted messages regardless of the identity of the transmitting devices. Finally, we provide sufficient conditions on the step sizes that ensure the convergence of the proposed algorithm in the sense of Bregman divergence. Simulation results show that the proposed algorithm is efficient for addressing both sourced and unsourced massive random access problems, while requires a shorter signature sequence and accommodates a significantly larger number of active devices with a reasonable antenna array size, compared with the state-of-art algorithms.

cs.IT↗