arXiv subjects

Xiaogang Xiong

Publications and source records attributed to Xiaogang Xiong.

13 recordsLinked to original sources

arXiv2026

Interacting Multiple Model Proprioceptive Odometry for Legged Robots

State estimation for legged robots remains challenging because legged odometry generally suffers from limited observability and therefore depends critically on measurement constraints to suppress drift. When exteroceptive sensors are unreliable or degraded, such constraints are mainly derived from proprioceptive measurements, particularly contact-related leg kinematics information. However, most existing proprioceptive odometry methods rely on an idealized point-contact assumption, which is often violated during real locomotion. Consequently, the effectiveness of proprioceptive constraints may be significantly reduced, resulting in degraded estimation accuracy. To address these limitations, we propose an interacting multiple model (IMM)-based proprioceptive odometry framework for legged robots. By incorporating multiple contact hypotheses within a unified probabilistic framework, the proposed method enables online mode switching and probabilistic fusion under varying contact conditions. Extensive simulations and real-world experiments demonstrate that the proposed method achieves superior pose estimation accuracy over state-of-the-art methods while maintaining comparable computational efficiency.

cs.RO↗

arXiv2026

Event-RGB Adaptive Tracking for Nighttime Highway Perception

Intelligent Transportation Systems deployed on highways predominantly rely on conventional RGB cameras for traffic perception and vehicle tracking. However, highway environments present unique challenges: the absence of artificial lighting infrastructure, combined with high vehicle velocities, results in severely degraded perception performance under low-light conditions. Specifically, nighttime scenarios suffer from motion blur, insufficient exposure, and poor signal-to-noise ratios, which catastrophically impair the reliability of RGB-based sensing systems. To address these limitations, we propose a novel Joint Event-RGB Adaptive Tracking (JEAT) framework. Unlike existing multi-sensor trackers constrained by rigid, hard-coded prioritization, JEAT merges asynchronous event streams and RGB frames into a unified joint data association optimization. By employing an Adaptive Extended Kalman Filter to continuously estimate measurement noise via NIS statistics, the framework dynamically weights and fuses both modalities, optimally harnessing event streams during dark or high-speed motion while leveraging RGB frames under bright or static conditions. Furthermore, given the absence of publicly available datasets tailored for event-based highway perception with diverse environmental conditions, we present SEHN, a large-scale synthetic dataset generated using the CARLA simulator. Our dataset encompasses diverse environmental conditions (daytime, nighttime, nighttime with out artificial lighting) and varying traffic densities, providing synchronized RGB imagery and event streams to facilitate multi-modal fusion research. Our code and datasets will be available at https://github.com/haidongwang96/SEHN.

cs.CV↗

arXiv2026

PC-SNN: Predictive Coding-based Local Hebbian Plasticity Learning in Spiking Neural Networks

Spiking Neural Networks (SNNs), regarded as the third generation of neural networks, emulate the brain's information processing with unparalleled biological plausibility compared to traditional neural networks. However, their non-linear, event-driven dynamics pose significant challenges for training, and existing methods often deviate from neuroscientific principles of cortical learning. Drawing inspiration from predictive coding theory-a leading model of brain information processing-we propose PC-SNN, a novel learning framework that integrates predictive coding with SNNs to enable biologically plausible, local Hebbian plasticity without reliance on backpropagation. Unlike conventional SNN training approaches, PC-SNN leverages only local computations, aligning with the brain's distributed processing and overcoming the biological implausibility of global error propagation. Our classification model achieves competitive performance on the benchmark datasets, including Caltech Face/Motorbike, MNIST, and CIFAR10, surpassing state-of-the-art multi-layer SNNs. Furthermore, our predictive coding-based regression model outperforms backpropagation-based methods while adhering to local plasticity constraints, offering a scalable and biologically grounded alternative for SNN training. PC-SNN drives progress in neuromorphic computing through validating the adaptability of bio-inspired algorithms within spiking neural architectures, but also unveils novel understandings of neurocognitive learning processes, presenting a conceptual framework distinguished by its theoretical originality and functional efficacy.

cs.NE↗

arXiv2025

Toward generic control for soft robotic systems

Soft robotics has advanced rapidly, yet its control methods remain fragmented: different morphologies and actuation schemes still require task-specific controllers, hindering theoretical integration and large-scale deployment. A generic control framework is therefore essential, and a key obstacle lies in the persistent use of rigid-body control logic, which relies on precise models and strict low-level execution. Such a paradigm is effective for rigid robots but fails for soft robots, where the ability to tolerate and exploit approximate action representations, i.e., control compliance, is the basis of robustness and adaptability rather than a disturbance to be eliminated. Control should thus shift from suppressing compliance to explicitly exploiting it. Human motor control exemplifies this principle: instead of computing exact dynamics or issuing detailed muscle-level commands, it expresses intention through high-level movement tendencies, while reflexes and biomechanical mechanisms autonomously resolve local details. This architecture enables robustness, flexibility, and cross-task generalization. Motivated by this insight, we propose a generic soft-robot control framework grounded in control compliance and validate it across robots with diverse morphologies and actuation mechanisms. The results demonstrate stable, safe, and cross-platform transferable behavior, indicating that embracing control compliance, rather than resisting it, may provide a widely applicable foundation for unified soft-robot control.

cs.RO↗

arXiv2025

Gentle Manipulation Policy Learning via Demonstrations from VLM Planned Atomic Skills

Autonomous execution of long-horizon, contact-rich manipulation tasks traditionally requires extensive real-world data and expert engineering, posing significant cost and scalability challenges. This paper proposes a novel framework integrating hierarchical semantic decomposition, reinforcement learning (RL), visual language models (VLMs), and knowledge distillation to overcome these limitations. Complex tasks are decomposed into atomic skills, with RL-trained policies for each primitive exclusively in simulation. Crucially, our RL formulation incorporates explicit force constraints to prevent object damage during delicate interactions. VLMs perform high-level task decomposition and skill planning, generating diverse expert demonstrations. These are distilled into a unified policy via Visual-Tactile Diffusion Policy for end-to-end execution. We conduct comprehensive ablation studies exploring different VLM-based task planners to identify optimal demonstration generation pipelines, and systematically compare imitation learning algorithms for skill distillation. Extensive simulation experiments and physical deployment validate that our approach achieves policy learning for long-horizon manipulation without costly human demonstrations, while the VLM-guided atomic skill framework enables scalable generalization to diverse tasks.

cs.RO↗

arXiv2024

Implicit Euler Discrete-Time Set-Valued Admittance Control for Impact-Contact Force Control

Admittance control is a commonly used strategy for regulating robotic systems, such as quadruped and humanoid robots, allowing them to respond compliantly to contact forces during interactions with their environments. However, it can lead to instability and unsafe behaviors like snapping back and overshooting due to torque saturation from impacts with unknown stiffness environments. This paper introduces a novel admittance controller that ensures stable force control after impacting unknown stiffness environments by leveraging the differentiability of impact-contact forces. The controller is mathematically represented by a differential algebraic inclusion (DAI) comprising two interdependent set-valued loops. The first loop employs set-valued first-order sliding mode control (SMC) to limit input torque post-impact. The second loop utilizes the multivariable super-twisting algorithm (MSTA) to mitigate unstable motion caused by impact forces when interacting with unknown stiffness environments. Implementing this proposed admittance control in digital settings presents challenges due to the interconnected structure of the two set-valued loops, unlike implicit Euler discretization methods for set-valued SMCs. To facilitate implementation, this paper offers a new algorithm for implicit Euler discretization of the DAI. Simulation and experimental results demonstrate that the proposed admittance controller outperforms state-of-the-art methods.

eess.SY↗

arXiv2024

Robust Dynamic Control Barrier Function Based Trajectory Planning for Mobile Manipulator

High-dimensional robot dynamic trajectory planning poses many challenges for traditional planning algorithms. Existing planning methods suffer from issues such as long computation times, limited capacity to address intricate obstacle models, and lack of consideration for external disturbances and measurement inaccuracies in these high-dimensional systems. To tackle these challenges, this paper proposes a novel trajectory planning approach that combines Dynamic Control Barrier Function (DCBF) with a disturbance observer to create a Robust Dynamic Control Barrier Function (RDCBF) planner. This approach successfully plans trajectories in environments with complex dynamic obstacles while accounting for external disturbances and measurement uncertainties, ensuring system safety and enabling precise obstacle avoidance. Experimental results on a mobile manipulator demonstrate outstanding performance of the proposed approach.

cs.RO↗

arXiv2023

Dynamic Object Tracking for Quadruped Manipulator with Spherical Image-Based Approach

Exactly estimating and tracking the motion of surrounding dynamic objects is one of important tasks for the autonomy of a quadruped manipulator. However, with only an onboard RGB camera, it is still a challenging work for a quadruped manipulator to track the motion of a dynamic object moving with unknown and changing velocities. To address this problem, this manuscript proposes a novel image-based visual servoing (IBVS) approach consisting of three elements: a spherical projection model, a robust super-twisting observer, and a model predictive controller (MPC). The spherical projection model decouples the visual error of the dynamic target into linear and angular ones. Then, with the presence of the visual error, the robustness of the observer is exploited to estimate the unknown and changing velocities of the dynamic target without depth estimation. Finally, the estimated velocity is fed into the model predictive controller (MPC) to generate joint torques for the quadruped manipulator to track the motion of the dynamical target. The proposed approach is validated through hardware experiments and the experimental results illustrate the approach's effectiveness in improving the autonomy of the quadruped manipulator.

cs.RO↗

arXiv2023

Safe Adaptive Multi-Agent Coverage Control

This paper presents a safe adaptive coverage controller for multi-agent systems with actuator faults and time-varying uncertainties. The centroidal Voronoi tessellation (CVT) is applied to generate an optimal configuration of multi-agent systems for covering an area of interest. As a conventional CVT-based controller cannot prevent collisions between agents with non-zero size, a control barrier function (CBF) based controller is developed to ensure collision avoidance with a function approximation technique (FAT) based design to deal with system uncertainties. The proposed controller is verified under simulations.

math.OC↗

arXiv2023

Proxy-based Super Twisting Control Algorithm for Aerial Manipulators

Aerial manipulators are composed of an aerial multi-rotor that is equipped with a 6-DOF servo robot arm. To achieve precise position and attitude control during the arm's motion, it is critical for the system to have high performance control capabilities. However, the coupling effect between the multi-rotor UAVs' movement poses a challenge to the entire system's control capability. We have proposed a new proxy-based super twisting control approach for quadrotor UAVs that mitigates the disturbance caused by moving manipulators. This approach helps improve the stability of the aerial manipulation system when carrying out hovering or trajectory tracking tasks. The controller's effectiveness has been validated through numerical simulation and further tested in the Gazebo simulation environment.

cs.RO↗

arXiv2019

DS-VIO: Robust and Efficient Stereo Visual Inertial Odometry based on Dual Stage EKF

This paper presents a dual stage EKF (Extended Kalman Filter)-based algorithm for the real-time and robust stereo VIO (visual inertial odometry). The first stage of this EKF-based algorithm performs the fusion of accelerometer and gyroscope while the second performs the fusion of stereo camera and IMU. Due to the sufficient complementary characteristics between accelerometer and gyroscope as well as stereo camera and IMU, the dual stage EKF-based algorithm can achieve a high precision of odometry estimations. At the same time, because of the low dimension of state vector in this algorithm, its computational efficiency is comparable to previous filter-based approaches. We call our approach DS-VIO (dual stage EKFbased stereo visual inertial odometry) and evaluate our DSVIO algorithm by comparing it with the state-of-art approaches including OKVIS, ROVIO, VINS-MONO and S-MSCKF on the EuRoC dataset. Results show that our algorithm can achieve comparable or even better performances in terms of the RMS error

cs.CV↗

arXiv2019

Chattering-Free Implementation of Continuous Terminal Algorithm with Implicit Euler Method

This paper proposes an efficient implementation for a continuous terminal algorithm (CTA). Although CTA is a continuous version of the famous twisting algorithm (TA), the conventional implementations of this CTA still suffer from chattering, especially when the gains and the time-step sizes are selected very large. The proposed implementation is based on an implicit Euler method and it totally suppresses the chattering. The proposed implementation is compared with the conventional explicit Euler implementation through simulations. It shows that the proposed implementation is very efficient and the chattering is suppressed both in the control input and output.

eess.SY↗

arXiv2018

Adaptive Gains to Super-Twisting Technique for Sliding Mode Design

This paper studies the super-twisting algorithm (STA) for adaptive sliding mode design. The proposed method tunes the two gains of STA on line simultaneously such that a second order sliding mode can take place with small rectifying gains. The perturbation magnitude is obtained exactly by employing a third-order sliding mode observer in opposition to the conventional approximations by using a first order low pass filter. While driving the sliding variable to the sliding mode surface, one gain of the STA automatically converges to an adjacent area of the perturbation magnitude in finite time. The other gain is adjusted by the above gain to guarantee the robustness of the STA. This method requires only one parameter to be adjusted. The adjustment is straightforward because it just keeps increasing until it fulfills the convergence constraints. For large values of the parameter, chattering in the update law of the two gains is avoided by employing a geometry based backward Euler integration method. The usefulness is illustrated by an example of designing an equivalent control based sliding mode control (ECBC-SMC) with the proposed adaptive STA for a perturbed LTI system.

eess.SY↗