arXiv subjects

Xiaohan Lu

Publications and source records attributed to Xiaohan Lu.

9 recordsLinked to original sources

arXiv2026

Booster-based beam recycling for swap-out injection at the High Energy Photon Source

Fourth-generation synchrotron light sources employ ultralow-emittance storage rings with stringent injection requirements. On-axis swap-out injection alleviates the dependence on storage-ring dynamic aperture, but high-charge operation requires an efficient injector architecture capable of producing high-charge replacement bunches. This paper presents the accelerator physics design and performance analysis of a booster-based beam-recycling swap-out injection scheme implemented at the High Energy Photon Source (HEPS). In this approach, the full-energy booster serves as both an injector and a high-energy accumulator. An extracted storage-ring bunch is returned to the booster, merged with a low-charge bunch previously injected from the linac and accelerated to full energy. Following high-energy damping, the merged bunch is reinjected into the original storage-ring bucket. The scheme avoids the need for a dedicated accumulator ring while enabling high-charge bunch replacement. The recycling scheme was commissioned through staged machine studies. Full recycling-chain simulations, commissioning studies, and measured performance analysis are presented. The measured results characterize the recycling operation and quantify the transmission efficiency and performance limitations of the complete recycling loop. These results demonstrate the feasibility of the booster-based beam-recycling architecture and establish its operational basis for high-charge swap-out injection in future fourth-generation synchrotron light sources.

physics.acc-ph↗

arXiv2026

OptArgus: A Multi-Agent System to Detect Hallucinations in LLM-based Optimization Modeling

Large language models (LLMs) are increasingly used to translate natural-language optimization problems into mathematical formulations and solver code, but matching the reference objective value is not a reliable test of correctness: an artifact may agree numerically while still changing the underlying optimization semantics. We formulate this issue as \emph{optimization-modeling hallucination detection}, namely structural consistency auditing over the problem description, symbolic model, and solver implementation. We develop, to our knowledge, the first fine-grained hallucination taxonomy specifically for optimization modeling, spanning objective, variable, constraint, and implementation failures. We use this taxonomy to design OptArgus, a multi-agent detector with conductor routing, specialist auditors, and evidence consolidation. To evaluate this setting, we introduce a three-part benchmark suite with $484$ clean artifacts, $1266$ controlled injected artifacts, and $6292$ natural LLM-generated artifacts. Against a matched single-agent baseline, OptArgus produces fewer false alarms on clean artifacts, more accurate top-ranked localization on controlled single-error cases, and stronger detection on natural model outputs. Together, these contributions turn optimization-modeling hallucination detection into a concrete empirical problem and suggest that modular, taxonomy-grounded auditing is a practical route to more reliable optimization modeling.

cs.AI↗

arXiv2026

Design and implementation of a high-density sub-nanosecond timing system for a C-band photocathode electron gun test platform

This paper presents the design and implementation of a high-density, deterministic trigger distribution system tailored for the C-band photocathode electron gun test platform at the Southern Advanced Photon Source (SAPS). Implemented within a scalable 6U VME modular architecture, the system achieves high-density integration by consolidating a master controller, clock distribution network, and 80 heterogeneous output channels into a single chassis. This design leverages a high-performance FPGA core combined with custom backplane interconnections to establish a master-slave topology, significantly reducing the system footprint compared to stacked standalone generators. To guarantee timing determinism in high-noise environments, precise placement and timing constraints are applied to the FPGA logic, while optical isolation is employed to mitigate electromagnetic interference. Furthermore, a dual-channel SFP optical signaling architecture enables seamless expansion to 160 synchronized channels. A remote control framework based on a serial server and a virtual machine Input/Output Controller (IOC) facilitates flexible configuration. Performance tests demonstrate adjustable trigger frequencies from 1 Hz to 100 Hz, with delays and pulse widths tunable from 0 to 10 ms at a resolution of 10 ns (or the RF period). The local electrical output exhibits an ultra-low RMS jitter of 6.55 ps (60 ps peak-to-peak). For remote optical distribution, the system maintains a sub-nanosecond RMS jitter of 119.5 ps, with peak-to-peak variation confined to 1 ns due to the combined effects of transceiver optoelectronic conversion (utilizing HFBR-1414T/2412T modules) and fiber transmission. The system has been successfully commissioned and is currently in reliable routine operation, verifying the architecture as a robust, highly integrated, and cost-effective solution for compact accelerator facilities.

physics.acc-ph↗

arXiv2025

TinySplat: Feedforward Approach for Generating Compact 3D Scene Representation

The recent development of feedforward 3D Gaussian Splatting (3DGS) presents a new paradigm to reconstruct 3D scenes. Using neural networks trained on large-scale multi-view datasets, it can directly infer 3DGS representations from sparse input views. Although the feedforward approach achieves high reconstruction speed, it still suffers from the substantial storage cost of 3D Gaussians. Existing 3DGS compression methods relying on scene-wise optimization are not applicable due to architectural incompatibilities. To overcome this limitation, we propose TinySplat, a complete feedforward approach for generating compact 3D scene representations. Built upon standard feedforward 3DGS methods, TinySplat integrates a training-free compression framework that systematically eliminates key sources of redundancy. Specifically, we introduce View-Projection Transformation (VPT) to reduce geometric redundancy by projecting geometric parameters into a more compact space. We further present Visibility-Aware Basis Reduction (VABR), which mitigates perceptual redundancy by aligning feature energy along dominant viewing directions via basis transformation. Lastly, spatial redundancy is addressed through an off-the-shelf video codec. Comprehensive experimental results on multiple benchmark datasets demonstrate that TinySplat achieves over 100x compression for 3D Gaussian data generated by feedforward methods. Compared to the state-of-the-art compression approach, we achieve comparable quality with only 6% of the storage size. Meanwhile, our compression framework requires only 25% of the encoding time and 1% of the decoding time.

cs.CV↗

arXiv2025

ProSplat: Improved Feed-Forward 3D Gaussian Splatting for Wide-Baseline Sparse Views

Feed-forward 3D Gaussian Splatting (3DGS) has recently demonstrated promising results for novel view synthesis (NVS) from sparse input views, particularly under narrow-baseline conditions. However, its performance significantly degrades in wide-baseline scenarios due to limited texture details and geometric inconsistencies across views. To address these challenges, in this paper, we propose ProSplat, a two-stage feed-forward framework designed for high-fidelity rendering under wide-baseline conditions. The first stage involves generating 3D Gaussian primitives via a 3DGS generator. In the second stage, rendered views from these primitives are enhanced through an improvement model. Specifically, this improvement model is based on a one-step diffusion model, further optimized by our proposed Maximum Overlap Reference view Injection (MORI) and Distance-Weighted Epipolar Attention (DWEA). MORI supplements missing texture and color by strategically selecting a reference view with maximum viewpoint overlap, while DWEA enforces geometric consistency using epipolar constraints. Additionally, we introduce a divide-and-conquer training strategy that aligns data distributions between the two stages through joint optimization. We evaluate ProSplat on the RealEstate10K and DL3DV-10K datasets under wide-baseline settings. Experimental results demonstrate that ProSplat achieves an average improvement of 1 dB in PSNR compared to recent SOTA methods.

cs.CV↗

arXiv2024

Development of high-level applications for High Energy Photon Source booster

The High Energy Photon Source (HEPS), is the first fourth-generation storage ring light source being built in the suburb of Beijing, China. The storage ring was designed with the emittance lower than 60 pm.rad with a circumference of 1.36 km and beam energy of 6 GeV. Its injector contains a 500 MeV S-band Linac and a 454 m booster which was designed as an accumulator at the extraction energy. In the energy ramping control design of HEPS booster, the ramping process was programed to be able to stop and stay at any energy between the injection energy and the extraction energy. This feature enables us to conduct energy-dependent machine studies and ramping curve optimization. The beam commissioning of HEPS Linac finished in June, 2023. And the beam commissioning of booster started in the end of July, 2023. In November 17, main target values proposed in the preliminary design report has been reached. The high-level applications (HLAs) are essential tools for beam commissioning. The development of HLAs, which are based on the framework named Python accelerator physics application set (Pyapas), started in the end of 2021. The HEPS physics team spent more than one year to develop and test the HLAs to meet the requirements of beam commissioning of the booster. Thanks to the modular design, the principle based on physical quantities, and the ability of running simulation models online from the Pyapas, the development efficiency and reliability of the HLAs have been greatly improved. In particular, the principle based on physical quantities allows us to control the beam more intuitively.

physics.acc-ph↗

arXiv2020

Study on the anti-correlated painting injection scheme for the Rapid Cycling Synchrotron of the China Spallation Neutron Source

In the rapid cycling synchrotron of the China Spallation Neutron Source, the anti-correlated painting was adopted for the design scheme of the injection system. In the beam commissioning, with the optimization of the anti-correlated painting,the injection beam loss has been well controlled and the injection efficiency has exceeded 99%. Combined with other aspects of adjustments, the beam power on the target has reached 50 kW smoothly. In this paper, we have studied the injection optimization in the beam commissioning. Compared to the simulation results of the design scheme, the transverse beam distribution, transverse coupling effect and beam loss of the anti-correlated painting in the beam commissioning are somewhat different. Through the machine studies, we have carefully analyzed these differences and studied their reasons.

physics.acc-ph↗

arXiv2018

The compensation for the edge focusing of chicane bump magnets by harmonic injection in CSNS/RCS

In the Rapid Cycling Synchrotron(RCS) of China Spallation Neutron Source(CSNS), transverse painting injection is employed to suppress the space-charge effects. The beta-beating caused by edge focusing of the injection bump magnets leads to tune shift and shrinkage of the acceptance, which may result in additional beam loss. In RCS, the main quadrupoles are excited by White resonant power supplies, and the exciting current cannot be arbitrarily programed. Generally, this kind of perturbation could be corrected by trim-quadrupole, however, we don't have trim-quadrupole in CSNS/RCS. A new method based on the harmonic injection is firstly introduced to compensate the beta-beating caused by edge focusing of the chicane bump magnets at RCS. In this paper, the principle and feasibility of compensation scheme were presented. The simulation study was done on the application of the new method to the CSNS/RCS, and the results show the validity and effectiveness of the method.

physics.acc-ph↗

arXiv2018

Injection orbit matching for CSNS/RCS

The Rapid Cycling Synchrotron(RCS) of China Spallation Neutron Source(CSNS) employs painting injection to achieve uniform beam distribution and suppress space-charge effects. In the painting injection, the mismatch between the injection beam orbit and circulating orbit could make the non-uniformity of beam distribution and emittance growth, which may lead to beam loss. To match the injection beam orbit and the circulating beam orbit, it is necessary to identify the orbit of injection beam relative to the circulating orbit in the injection point. However, it's hard to measure this relative injection orbit directly. Theoretically, the relative injection beam orbit can be deduced by measuring the turn-by-turn beam position of a single turn injection beam. However, the intensity of single turn injected beam is too low to be measured with sufficient signal-noise ratio by using beam position monitor(BPM). In this paper, two effective methods based on multi-turn injection and turn-by-turn BPM are given to perform the match between the injection and the circulating beam orbit. The simulation results and application in the beam commissioning of CSNS/RCS show the validity of the methods.

physics.acc-ph↗