SearcharxivSearch

arXiv subjects

Xiaojia Wang

Publications and source records attributed to Xiaojia Wang.

At least 19 recordsLinked to original sources

Enhancing wall-to-wall heat transport with unsteady flow perturbations

We determine unsteady flow perturbations that are optimal for enhancing the rate of heat transfer between hot and cold walls (i.e. the Nusselt number Nu), under the constraint of fixed flow power (Pe$^2$, where Pe is the Péclet number). The unsteady flows are perturbations of previously computed optimal steady flows and are given by eigenmodes of the Hessian matrix of Nu, the matrix of second derivatives with respect to amplitudes of flow mode coefficients. Positive eigenvalues of the Hessian correspond to increases in Nu by unsteady flows, and occur at Pe $\geq 10^{3.5}$ and within a band of flow periods $τ\sim$ Pe$^{-1}$. For $τ$Pe $\leq 10^{0.5}$, the optimal flows are chains of vortices that move along the walls or along eddies enclosed by flow branches near the walls. At larger $τ$Pe the vorticity distributions are often more complex and extend farther from the walls. The heat flux is enhanced at locations on the walls near the unsteady vorticity. We construct an iterative time-spectral solver for the unsteady temperature field and find increases in Nu of up to 7% at moderate-to-large perturbation amplitudes.

physics.flu-dyn

Optimizing Time-resolved Magneto-optical Kerr Effect for High-fidelity Magnetic Characterization

Spintronics has emerged as a key technology for fast and non-volatile memory with great CMOS compatibility. As the building blocks for these cutting-edge devices, magnetic materials require precise characterization of their critical properties, such as the effective anisotropy field ($H_{\rm{k,eff}}$, related to magnetic stability) and damping ($α$ key factor in device energy efficiency). Accurate measurements of these properties are essential for designing and fabricating high-performance spintronic devices. Among advanced metrology techniques, Time-resolved Magneto-Optical Kerr Effect (TR-MOKE) stands out for its superb temporal and spatial resolutions, surpassing traditional methods like ferromagnetic resonance (FMR). However, the full potential of TR-MOKE has not yet been fully pledged due to the lack of systematic optimization and robust operational guidelines. In this study, we address this gap by developing experimentally validated guidelines for optimizing TR-MOKE metrology across materials with perpendicular magnetic anisotropy (PMA) and in-plane magnetic anisotropy (IMA). Our work identifies the optimal ranges of the field angle to simultaneously achieve high signal amplitudes and improve measurement sensitivities to $H_{\rm{k,eff}}$ and $α$. By suppressing the influence of inhomogeneities and boosting sensitivity, our work significantly enhances TR-MOKE capability to extract magnetic properties with high accuracy and reliability. This optimization framework positions TR-MOKE as an indispensable tool for advancing spintronics, paving the way for energy-efficient and high-speed devices that will redefine the landscape of modern computing and memory technologies.

cond-mat.mes-hall

Fast spin precession and strong perpendicular magnetic anisotropy in ferrimagnetic Mn4N thin films improved by Pd buffer layer

Ferrimagnets take the advantages of both ferromagnets and antiferromagnets making them promise for spintronic applications. Here we prepared ferrimagnetic Mn4N thin films with high Curie temperature and investigated the crystalline structure and magnetic properties affected by the Pd buffer layer. We demonstrated that both crystalline quality and perpendicular magnetic anisotropy (PMA) of Mn4N thin films are enhanced significantly due to the relaxation of tensile stress induced by the Pd buffer layer. We also demonstrated a fast spin precession at room temperature, almost 100 GHz, in Mn4N thin films. With the characteristics of high thermal stability, enhanced PMA by buffer layer and fast spin precession, Mn4N thin film is a promising material for spintronic applications.

cond-mat.mtrl-sci

How vortices enhance heat transfer from an oscillating plate

Oscillations of a heated solid surface in an oncoming fluid flow can increase heat transfer from the solid to the fluid. Previous studies have investigated the resulting heat transfer enhancement for the case of a circular cylinder undergoing translational or rotational motions. Another common geometry, the flat plate, has not been studied as thoroughly. The flat plate sheds larger and stronger vortices that are sensitive to the plate's direction of oscillation. To study the effect of these vortices on heat transfer enhancement, we compute the heat transfer from a flat plate with different orientations and oscillation directions in an oncoming flow with Reynolds number 100. We consider plates with fixed temperature and fixed heat flux, and find large heat transfer enhancement in both cases. We investigate the effects of the plate orientation angle and the plate oscillation direction, velocity, amplitude, and frequency, and find that the plate oscillation velocity and direction have the strongest effects on global heat transfer. The other parameters mainly affect the local heat transfer distributions through shed vorticity distributions. We also discuss the input power needed for the oscillating plate system and the resulting Pareto optimal cases.

physics.flu-dyn

Oscillatory flows in compliant conduits at arbitrary Womersley number

We develop a theory of fluid--structure interaction (FSI) between an oscillatory Newtonian fluid flow and a compliant conduit. We consider the canonical geometries of a 2D channel with a deformable top wall and an axisymmetric deformable tube. Focusing on the hydrodynamics, we employ a linear relationship between wall displacement and hydrodynamic pressure, which has been shown to be suitable for a leading-order-in-slenderness theory. The slenderness assumption also allows the use of lubrication theory, and the flow rate is related to the pressure gradient (and the tube/wall deformation) via the classical solutions for oscillatory flow in a channel and in a tube (attributed to Womersley). Then, by two-way coupling the oscillatory flow and the wall deformation via the continuity equation, a one-dimensional nonlinear partial differential equation (PDE) governing the instantaneous pressure distribution along the conduit is obtained, without \textit{a priori} assumptions on the magnitude of the oscillation frequency (\textit{i.e.}, at arbitrary Womersley number). We find that the cycle-averaged pressure (for harmonic pressure-controlled conditions) deviates from the expected steady pressure distribution, suggesting the presence of a streaming flow. An analytical perturbative solution for a weakly deformable conduit is obtained to rationalize how FSI induces such streaming. In the case of a compliant tube, the results obtained from the proposed reduced-order PDE and its perturbative solutions are validated against three-dimensional, two-way-coupled direct numerical simulations. We find good agreement between theory and simulations for a range of dimensionless parameters characterizing the oscillatory flow and the FSI, demonstrating the validity of the proposed theory of oscillatory flows in compliant conduits at arbitrary Womersley number.

physics.flu-dyn

Capacity Analysis and Throughput Maximization of NOMA with Nonlinear Power Amplifier Distortion

In future B5G/6G broadband communication systems, non-linear signal distortion caused by the impairment of transmit power amplifier (PA) can severely degrade the communication performance, especially when uplink users share the wireless medium using non-orthogonal multiple access (NOMA) schemes. This is because the successive interference cancellation (SIC) decoding technique, used in NOMA, is incapable of eliminating the interference caused by PA distortion. Consequently, each user's decoding process suffers from the cumulative distortion noise of all uplink users. In this paper, we establish a new and tractable PA distortion signal model based on real-world measurements, where the distortion noise power is a polynomial function of PA transmit power diverging from the oversimplified linear function commonly employed in existing studies. Applying the proposed signal model, we characterize the capacity rate region of multi-user uplink NOMA by optimizing the user transmit power. Our findings reveal a significant contraction in the capacity region of NOMA, attributable to polynomial distortion noise power. For practical engineering applications, we formulate a general weighted sum rate maximization (WSRMax) problem under individual user rate constraints. We further propose an efficient power control algorithm to attain the optimal performance. Numerical results show that the optimal power control policy under the proposed non-linear PA model achieves on average 13\% higher throughput compared to the policies assuming an ideal linear PA model. Overall, our findings demonstrate the importance of accurate PA distortion modeling to the performance of NOMA and provide efficient optimal power control method accordingly.

cs.NI

Magnetization Dynamics in Synthetic Antiferromagnets with Perpendicular Magnetic Anisotropy

Understanding the rich physics of magnetization dynamics in perpendicular synthetic antiferromagnets (p-SAFs) is crucial for developing next-generation spintronic devices. In this work, we systematically investigate the magnetization dynamics in p-SAFs combining time-resolved magneto-optical Kerr effect (TR-MOKE) measurements with theoretical modeling. These model analyses, based on a Landau-Lifshitz-Gilbert approach incorporating exchange coupling, provide details about the magnetization dynamic characteristics including the amplitudes, directions, and phases of the precession of p-SAFs under varying magnetic fields. These model-predicted characteristics are in excellent quantitative agreement with TR-MOKE measurements on an asymmetric p-SAF. We further reveal the damping mechanisms of two procession modes co-existing in the p-SAF and successfully identify individual contributions from different sources, including Gilbert damping of each ferromagnetic layer, spin pumping, and inhomogeneous broadening. Such a comprehensive understanding of magnetization dynamics in p-SAFs, obtained by integrating high-fidelity TR-MOKE measurements and theoretical modeling, can guide the design of p-SAF-based architectures for spintronic applications.

cond-mat.mes-hall

Wide-range continuous tuning of the thermal conductivity of $\rm La_{0.5}Sr_{0.5}CoO_{3-δ}$ films via room-temperature ion-gel gating

Solid-state control of the thermal conductivity of materials is of exceptional interest for novel devices such as thermal diodes and switches. Here, we demonstrate the ability to continuously tune the thermal conductivity of nanoscale films of $\rm La_{0.5}Sr_{0.5}CoO_{3-δ}$ (LSCO) by a factor of over 5, via a room-temperature electrolyte-gate-induced non-volatile topotactic phase transformation from perovskite (with $δ\approx 0.1$) to an oxygen-vacancy-ordered brownmillerite phase (with $δ=0.5$), accompanied by a metal-insulator transition. Combining time-domain thermoreflectance and electronic transport measurements, model analyses based on molecular dynamics and Boltzmann transport, and structural characterization by X-ray diffraction, we uncover and deconvolve the effects of these transitions on heat carriers, including electrons and lattice vibrations. The wide-range continuous tunability of LSCO thermal conductivity enabled by low-voltage (below 4 V) room-temperature electrolyte gating opens the door to non-volatile dynamic control of thermal transport in perovskite-based functional materials, for thermal regulation and management in device applications.

cond-mat.mtrl-sci

Flow rate--pressure drop relations for new configurations of slender compliant tubes arising in microfluidics experiments

We investigate the steady-state fluid--structure interaction between a Newtonian fluid flow and a deformable microtube in two novel geometric configurations arising in recent microfluidics experiments. The first configuration is a cylindrical fluidic channel surrounded by an annulus of soft material with a rigid outer wall, while the second one is a cylindrical fluidic channel extruded from a soft rectangular slab of material. In each configuration, we derive a mathematical theory for the nonlinear flow rate--pressure drop relation by coupling lubrication theory for the flow with linear elasticity for the inner tube wall's deformation. Using the flow conduit's axial slenderness and its axisymmetry, we obtain an analytical expression for the radial displacement in each configuration from a plane-strain configuration. The predicted displacement field, and the resulting closed-form flow rate--pressure drop relation, are each validated against three-dimensional direct numerical simulations via SimVascular's two-way-coupled fluid--structure interaction solver, svFSI, showing good agreement. We also show that weak flow inertia can be easily incorporated in the derivation, further improving the agreement between theory and simulations for larger imposed flow rates.

physics.flu-dyn

Reduced modelling and global instability of finite-Reynolds-number flow in compliant rectangular channels

Experiments have shown that flow in compliant microchannels can become unstable at a much lower Reynolds number than the corresponding flow in a rigid conduit. Therefore, it has been suggested that the wall's elastic compliance can be exploited towards new modalities of microscale mixing. While previous studies mainly focused on the local instability induced by the fluid--structure interactions (FSIs) in the system, we derive a one-dimensional (1D) model to study the FSI's effect on the global instability. The proposed 1D FSI model is tailored to long, shallow rectangular microchannels with a deformable top wall, similar to the experiments. Going beyond the usual lubrication flows analyzed in these geometries, we include finite fluid inertia and couple the reduced flow equations to a novel reduced 1D wall deformation equation. Although a quantitative comparison to previous experiments is difficult, the behaviors of the proposed model show qualitative agreement with the experimental observations, and capture several key effects. Specifically, we find the critical conditions under which the inflated base state of the 1D FSI model is linearly unstable to infinitesimal perturbations. The critical Reynolds numbers predicted are in agreement with experimental observations. The unstable modes are highly oscillatory, with frequencies close to the natural frequency of the wall, suggesting that the observed instabilities are resonance phenomena. Furthermore, during the start-up from an undeformed initial state, self-sustained oscillations can be triggered by FSI. Our modeling framework can be applied to other microfluidic systems with similar geometric scale separation under different operating conditions.

physics.flu-dyn

Reduced models of unidirectional flows in compliant rectangular ducts at finite Reynolds number

Soft hydraulics, which addresses the interaction between an internal flow and a compliant conduit, is a central problem in microfluidics. We analyze Newtonian fluid flow in a rectangular duct with a soft top wall at steady state. The resulting fluid--structure interaction (FSI) is formulated for both vanishing and finite flow inertia. At the leading-order in the small aspect ratio, the lubrication approximation implies that the pressure only varies in the streamwise direction. Meanwhile, the compliant wall's slenderness makes the fluid--solid interface behave like a Winkler foundation, with the displacement fully determined by the local pressure. Coupling flow and deformation and averaging across the cross-section leads to a one-dimensional reduced model. In the case of vanishing flow inertia, an effective deformed channel height is defined rigorously to eliminate the spanwise dependence of the deformation. It is shown that a previously-used averaged height concept is an acceptable approximation. From the one-dimensional model, a friction factor and the corresponding Poiseuille number are derived. Unlike the rigid duct case, the Poiseuille number for a compliant duct is not constant but varies in the streamwise direction. Compliance can increase the Poiseuille number by a factor of up to four. The model for finite flow inertia is obtained by assuming a parabolic vertical variation of the streamwise velocity. To satisfy the displacement constraints along the edges of the channel, weak tension is introduced in the streamwise direction to regularize the Winkler-foundation-like model. Matched asymptotic solutions of the regularized model are derived.

physics.flu-dyn

Ultra-high frequency magnetic resonance through strain-spin coupling in perpendicular magnetic multi-layers

The interaction between strain and spin has received intensive attention in the scientific community due to its abundant physical phenomena and huge technological impact. Until now, there is no experimental report on ultra-high frequency magnetic resonance through the strain-spin coupling for any technologically relevant perpendicular magnetic material. Here we report the experimental detection of the acoustic strain waves that have a response time on the order of 10 picoseconds in perpendicular magnetic [Co/Pd]n multilayers via a femtosecond laser pulse excitation. Through direct measurements of acoustic strain waves, we observe an ultra-high frequency magnetic resonance up to 60 GHz in [Co/Pd]n multilayers. We further report a theoretical model of the strain-spin interaction. Our model reveals that the energy could be transferred efficiently from the strain to the spins and well explains the existence of a steady resonance state through exciting the spin system. The physical origins of the resonance between strain waves and magnetic precession and the requested conditions for obtaining magnetic resonance within thin magnetic films have also been discussed after thorough analysis. These combined results point out a potential pathway to enable an extremely high frequency (EHF) magnetic resonance through the strain-spin coupling.

cond-mat.mtrl-sci

Soft Hydraulics in Channels with Thick Walls: The Finite-Reynolds-Number Base State and Its Stability

We analyze the linear stability of the base state of the problem of coupled flow and deformation in a long and shallow rectangular soft hydraulic conduit with a thick top wall. Specifically, the steady base state is computed at low but finite Reynolds number. Then, we show that with the upstream flux fixed and the outlet pressure set to gauge, the flow is linearly stable to infinitesimal flow-wise perturbations. Multiple oscillatory but stable eigenmodes are computed in a range of the reduced Reynolds number, $\hat{Re}$, and the so-called fluid--structure interaction (FSI) parameter, $λ$, indicating the stiffness of this FSI system. These results provide a framework to address, in future work, the individual effects of various aspects of two-way FSI coupling on instability and flow transition in soft hydraulic conduits.

physics.flu-dyn

Unsteady fluid--structure interactions in a soft-walled microchannel: A one-dimensional lubrication model for finite Reynolds number

We develop a one-dimensional model for the unsteady fluid--structure interaction (FSI) between a soft-walled microchannel and viscous fluid flow within it. A beam equation, which accounts for both transverse bending rigidity and nonlinear axial tension, is coupled to a one-dimensional fluid model obtained from depth-averaging the two-dimensional incompressible Navier--Stokes equations across the channel height. Specifically, the Navier--Stokes equations are scaled in the viscous lubrication limit relevant to microfluidics. The resulting set of coupled nonlinear partial differential equations is solved numerically through a segregated approach employing fully-implicit time stepping. We explore both the static and dynamic FSI behavior of this example microchannel system by varying a reduced Reynolds number $Re$, which necessarily changes the Strouhal number $St$, while we keep the geometry and a modified dimensionless Young's modulus $Σ$ fixed. At steady state, an order-of-magnitude analysis (balancing argument) shows that the axially-averaged pressure in the flow, $\langle P\rangle$, exhibits two different scaling regimes, while the maximum deformation of the top wall of the channel, $H_{\mathrm{max}}$, can fall into four different regimes, depending on the magnitudes of $Re$ and $Σ$. These regimes are physically explained as resulting from the competition between the inertial and viscous forces in the fluid flow as well as the bending resistance and tension in the elastic wall. Finally, the linear stability of the steady inflated microchannel shape is assessed via a modal analysis, showing the existence of many highly oscillatory but stable modes, which further highlights the computational challenge of simulating unsteady FSIs.

physics.flu-dyn

Theory of the flow-induced deformation of shallow compliant microchannels with thick walls

Long, shallow microchannels embedded in thick soft materials are widely used in microfluidic devices for lab-on-a-chip applications. However, the bulging effect caused by fluid--structure interactions between the internal viscous flow and the soft walls has not been completely understood. Previous models either contain a fitting parameter or are specialized to channels with plate-like walls. This work is a theoretical study of the steady-state response of a compliant microchannel with a thick wall. Using lubrication theory for low-Reynolds-number flows and the theory for linearly elastic isotropic solids, we obtain perturbative solutions for the flow and deformation. Specifically, only the channel's top wall deformation is considered, and the ratio between its thickness $t$ and width $w$ is assumed to be $(t/w)^2 \gg 1$. We show that the deformation at each stream-wise cross-section can be considered independently, and that the top wall can be regarded as a simply supported rectangle subject to uniform pressure at its bottom. The stress and displacement fields are found using Fourier series, based on which the channel shape and the hydrodynamic resistance are calculated, yielding a new flow rate--pressure drop relation without fitting parameters. Our results agree favorably with, and thus rationalize, previous experiments.

physics.flu-dyn

Optimization of Time-Resolved Magneto-optical Kerr Effect Signals for Magnetization Dynamics Measurements

Recently magnetic storage and magnetic memory have shifted towards the use of magnetic thin films with perpendicular magnetic anisotropy (PMA). Understanding the magnetic damping in these materials is crucial, but normal Ferromagnetic Resonance (FMR) measurements face some limitations. The desire to quantify the damping in materials with PMA has resulted in the adoption of Time-Resolved Magneto-optical Kerr Effect (TR-MOKE) measurements. In this paper, we discuss the angle and field dependent signals in TR-MOKE, and utilize a numerical algorithm based on the Landau-Lifshitz-Gilbert (LLG) equation to provide information on the optimal conditions to run TR-MOKE measurements.

cond-mat.mes-hall

Direct Investigation of the Birefringent Optical Properties of Black Phosphorus with Picosecond Interferometry

Black phosphorus (BP) is an emerging two-dimensional semiconducting material with great potential for nanoelectronic and nanophotonic applications, especially owing to its unique anisotropic electrical and optical properties. Many theoretical studies have predicted the anisotropic optical properties of BP, but the direct experimental quantification remains challenging. The difficulties stem from the ease of BP's degradation when exposed to air in ambient conditions, and from the indirect nature of conventional approaches that are subject to large measurement uncertainties. This work reports a direct investigation of the birefringent optical constants of micrometer-thick BP samples with picosecond (ps) interferometry, over the wavelength range from 780 to 890 nm. In this ps-interferometry approach, an ultrathin (5 nm) platinum layer for launching acoustic waves naturally protects the BP flake from degradation. The birefringent optical constants of BP for light polarization along the two primary crystalline orientations, zigzag and armchair, are directly obtained via fitting the attenuated Brillouin scattering signals. A bi-exponential model is further proposed to analyze the BS signals for a random incident light polarization. The BP experimental results and the associated measurement sensitivity analysis demonstrate the reliability and accuracy of the ps-interferometry approach for capturing the polarization-dependent optical properties of birefringent materials.

physics.optics

Low Gilbert Damping Constant in Perpendicularly Magnetized W/CoFeB/MgO Films with High Thermal Stability

Perpendicular magnetic materials with low damping constant and high thermal stability have great potential for realizing high-density, non-volatile, and low-power consumption spintronic devices, which can sustain operation reliability for high processing temperatures. In this work, we study the Gilbert damping constant (α) of perpendicularly magnetized W/CoFeB/MgO films with a high perpendicular magnetic anisotropy (PMA) and superb thermal stability. The α of these PMA films annealed at different temperatures is determined via an all-optical Time-Resolved Magneto-Optical Kerr Effect method. We find that α of these W/CoFeB/MgO PMA films decreases with increasing annealing temperature, reaches a minimum of α = 0.016 at an annealing temperature of 350 °C, and then increases to 0.024 after post-annealing at 400 °C. The minimum α observed at 350 °C is rationalized by two competing effects as the annealing temperature becomes higher: the enhanced crystallization of CoFeB and dead-layer growth occurring at the two interfaces of the CoFeB layer. We further demonstrate that α of the 400 °C-annealed W/CoFeB/MgO film is comparable to that of a reference Ta/CoFeB/MgO PMA film annealed at 300 °C, justifying the enhanced thermal stability of the W-seeded CoFeB films.

cond-mat.mes-hall