arXiv subjects

Xiaojun Jing

Publications and source records attributed to Xiaojun Jing.

14 recordsLinked to original sources

arXiv2026

RFCheck: Synthetic RF Sensing Data Can Fail Measurement Consistency

Synthetic radio-frequency (RF) sensing data are widely used to augment wireless sensing tasks, yet their measurement consistency with real data is rarely evaluated under matched acquisition conditions. This paper identifies a measurement-consistency failure mode: synthetic samples may pass task-facing checks while deviating from the measurement behavior of real samples collected and processed by the same sensing pipeline, potentially introducing synthetic shortcuts and biasing downstream model selection. We propose RFCheck, a calibrated measurement audit that uses held-out real data from the same acquisition and preprocessing pipeline as the reference. RFCheck calibrates representation-specific tests on real samples and flags synthetic samples whose responses exceed the calibrated real-data range. We use the audit for candidate screening and residual repair. We validate RFCheck primarily on Wi-Fi channel state information (CSI), where the audit examines delay-domain and local frequency-domain structures. Experiments show that aggregate statistics and label-based screening can miss measurement failures detected by RFCheck. Under the same label acceptance rule, low-risk and high-risk synthetic candidates exhibit different downstream behavior. A repair reference reduces the flagged ratio to 10.83% while preserving mean task performance. In a held-out proposal study, correction followed by calibrated selection produces a class-balanced set with no flagged samples under a fixed training budget. We further apply the same calibration principle to frequency-modulated continuous-wave (FMCW) millimeter-wave radar gesture sensing. The results show that synthetic RF sensing data can violate measurement consistency even when conventional task checks are satisfied, motivating measurement-aware diagnosis and mitigation before augmentation.

eess.SP↗

arXiv2026

Low-Altitude Wireless Networks: A Comprehensive Survey

The rapid development of the low-altitude economy has imposed unprecedented demands on wireless infrastructure to accommodate large-scale drone deployments and facilitate intelligent services in dynamic airspace environments. However, unlocking its full potential in practical applications presents significant challenges. Traditional aerial systems predominantly focus on air-ground communication services, often neglecting the integration of sensing, computation, control, and energy-delivering functions, which hinders the ability to meet diverse mission-critical demands. Besides, the absence of systematic low-altitude airspace planning and management exacerbates issues regarding dynamic interference in three-dimensional space, coverage instability, and scalability. To overcome these challenges, a comprehensive framework, termed low-altitude wireless network (LAWN), has emerged to seamlessly integrate communication, sensing, computation, control, and air traffic management into a unified design. This article provides a comprehensive overview of LAWN systems, introducing LAWN system fundamentals and the evolution of functional designs. Subsequently, we delve into performance evaluation metrics and review critical concerns surrounding privacy and security in the open-air network environment. Finally, we present the cutting-edge developments in airspace structuring and air traffic management, providing insights to facilitate the practical deployment of LAWNs.

eess.SP↗

arXiv2026

Integrated Sensing and Communications Over the Years: An Evolution Perspective

Integrated Sensing and Communications (ISAC) enables efficient spectrum utilization and reduces hardware costs for beyond 5G (B5G) and 6G networks, facilitating intelligent applications that require both high-performance communication and precise sensing capabilities. This survey provides a comprehensive review of the evolution of ISAC over the years. We examine the expansion of the spectrum across RF and optical ISAC, highlighting the role of advanced technologies, along with key challenges and synergies. We further discuss the advancements in network architecture from single-cell to multi-cell systems, emphasizing the integration of collaborative sensing and interference mitigation strategies. Moreover, we analyze the progress from single-modal to multi-modal sensing, with a focus on the integration of edge intelligence to enable real-time data processing, reduce latency, and enhance decision-making. Finally, we extensively review standardization efforts by 3GPP, IEEE, and ITU, examining the transition of ISAC-related technologies and their implications for the deployment of 6G networks.

eess.SP↗

arXiv2026

SDP: A Unified Protocol and Benchmarking Framework for Reproducible Wireless Sensing

Learning-based wireless sensing has made rapid progress, yet the field still lacks a unified and reproducible experimental foundation. Unlike computer vision, wireless sensing relies on hardware-dependent channel measurements whose representations, preprocessing pipelines, and evaluation protocols vary significantly across devices and datasets, hindering fair comparison and reproducibility. This paper proposes the Sensing Data Protocol (SDP), a protocol-level abstraction and unified benchmark for scalable wireless sensing. SDP acts as a standardization layer that decouples learning tasks from hardware heterogeneity. To this end, SDP enforces deterministic physical-layer sanitization, canonical tensor construction, and standardized training and evaluation procedures, decoupling learning performance from hardware-specific artifacts. Rather than introducing task-specific models, SDP establishes a principled protocol foundation for fair evaluation across diverse sensing tasks and platforms. Extensive experiments demonstrate that SDP achieves competitive accuracy while substantially improving stability, reducing inter-seed performance variance by orders of magnitude on complex activity recognition tasks. A real-world experiment using commercial off-the-shelf Wi-Fi hardware further illustrating the protocol's interoperability across heterogeneous hardware. By providing a unified protocol and benchmark, SDP enables reproducible and comparable wireless sensing research and supports the transition from ad hoc experimentation toward reliable engineering practice.

eess.SP↗

arXiv2025

A Sensing Dataset Protocol for Benchmarking and Multi-Task Wireless Sensing

Wireless sensing has become a fundamental enabler for intelligent environments, supporting applications such as human detection, activity recognition, localization, and vital sign monitoring. Despite rapid advances, existing datasets and pipelines remain fragmented across sensing modalities, hindering fair comparison, transfer, and reproducibility. We propose the Sensing Dataset Protocol (SDP), a protocol-level specification and benchmark framework for large-scale wireless sensing. SDP defines how heterogeneous wireless signals are mapped into a unified perception data-block schema through lightweight synchronization, frequency-time alignment, and resampling, while a Canonical Polyadic-Alternating Least Squares (CP-ALS) pooling stage provides a task-agnostic representation that preserves multipath, spectral, and temporal structures. Built upon this protocol, a unified benchmark is established for detection, recognition, and vital-sign estimation with consistent preprocessing, training, and evaluation. Experiments under the cross-user split demonstrate that SDP significantly reduces variance (approximately 88%) across seeds while maintaining competitive accuracy and latency, confirming its value as a reproducible foundation for multi-modal and multitask sensing research.

eess.SP↗

arXiv2025

Bruxism Recognition via Wireless Signal

Bruxism is an oromandibular movement disorder involving teeth grinding and clenching, which severely impairs sleep quality and dental health. However, its diagnosis remains challenging, as existing methods often cause discomfort or compromise user privacy. To address these limitations, we establish a contactless bruxism recognition system based on millimeter-wave radar. First, we analyzed the potential impact of the movement patterns of teeth grinding on radar echo signals. Based on this analysis, 11 features were extracted. Subsequently, using these features, we performed classification with a Random Forest model on the dataset constructed via millimeter-wave radar. Experimental results demonstrate that the proposed method achieves an accuracy of 96.1% on the test set, with precision, recall, and F1-score all remaining at a relatively high level. This study validates the effectiveness of millimeter-wave radar for SB recognition, providing a non-invasive and privacy-friendly alternative to existing recognition techniques. Future research will focus on enhancing the robustness of the method across diverse populations and environments, as well as striving to mitigate the interference of other facial micro-movements on teeth grinding recognition.

eess.SP↗

arXiv2025

Integrated Sensing and Communication: Towards Multifunctional Perceptive Network

The capacity-maximization design philosophy has driven the growth of wireless networks for decades. However, with the slowdown in recent data traffic demand, the mobile industry can no longer rely solely on communication services to sustain development. In response, Integrated Sensing and Communications (ISAC) has emerged as a transformative solution, embedding sensing capabilities into communication networks to enable multifunctional wireless systems. This paradigm shift expands the role of networks from sole data transmission to versatile platforms supporting diverse applications. In this review, we provide a bird's-eye view of ISAC for new researchers, highlighting key challenges, opportunities, and application scenarios to guide future exploration in this field.

eess.SP↗

arXiv2024

Near-field Beam training for Extremely Large-scale MIMO Based on Deep Learning

Extremely Large-scale Array (ELAA) is considered a frontier technology for future communication systems, pivotal in improving wireless systems' rate and spectral efficiency. As ELAA employs a multitude of antennas operating at higher frequencies, users are typically situated in the near-field region where the spherical wavefront propagates. The near-field beam training in ELAA requires both angle and distance information, which inevitably leads to a significant increase in the beam training overhead. To address this problem, we propose a near-field beam training method based on deep learning. We use a convolutional neural network (CNN) to efficiently learn channel characteristics from historical data by strategically selecting padding and kernel sizes. The negative value of the user average achievable rate is utilized as the loss function to optimize the beamformer. This method maximizes multi-user networks' achievable rate without predefined beam codebooks. Upon deployment, the model requires solely the pre-estimated channel state information (CSI) to derive the optimal beamforming vector. The simulation results demonstrate that the proposed scheme achieves a more stable beamforming gain and significantly improves performance compared to the traditional beam training method. Furthermore, owing to the inherent traits of deep learning methodologies, this approach substantially diminishes the near-field beam training overhead.

cs.LG↗

arXiv2023

Efficient Spectrum Sharing Between Coexisting OFDM Radar and Downlink Multiuser Communication Systems

This paper investigates the problem of joint subcarrier and power allocation in the coexistence of radar and multi-user communication systems. Specifically, in our research scenario, the base station (BS) provides information transmission services for multiple users while ensuring that its interference to a separate radar system will not affect the radar's normal function. To this end, we propose a subcarrier and power allocation scheme based on orthogonal frequency division multiple access (OFDM). The original problem consisting involving multivariate fractional programming and binary variables is highly non-convex. Due to its complexity, we relax the binary constraint by introducing a penalty term, provided that the optimal solution is not affected. Then, by integrating multiple power variables into one matrix, the original problem is reformulated as a multi-ratio fractional programming (FP) problem, and finally a quadratic transform is employed to make the non-convex problem a sequence of convex problems. The numerical results indicate the performance trade-off between the multi-user communication system and the radar system, and notably that the performance of the communication system is not improved with power increase in the presence of radar interference beyond a certain threshold. This provides a useful insight for the energy-efficient design of the system.

cs.IT↗

arXiv2023

Hybrid Driven Learning for Channel Estimation in Intelligent Reflecting Surface Aided Millimeter Wave Communications

Intelligent reflecting surfaces (IRS) have been proposed in millimeter wave (mmWave) and terahertz (THz) systems to achieve both coverage and capacity enhancement, where the design of hybrid precoders, combiners, and the IRS typically relies on channel state information. In this paper, we address the problem of uplink wideband channel estimation for IRS aided multiuser multiple-input single-output (MISO) systems with hybrid architectures. Combining the structure of model driven and data driven deep learning approaches, a hybrid driven learning architecture is devised for joint estimation and learning the properties of the channels. For a passive IRS aided system, we propose a residual learned approximate message passing as a model driven network. A denoising and attention network in the data driven network is used to jointly learn spatial and frequency features. Furthermore, we design a flexible hybrid driven network in a hybrid passive and active IRS aided system. Specifically, the depthwise separable convolution is applied to the data driven network, leading to less network complexity and fewer parameters at the IRS side. Numerical results indicate that in both systems, the proposed hybrid driven channel estimation methods significantly outperform existing deep learning-based schemes and effectively reduce the pilot overhead by about 60% in IRS aided systems.

cs.IT↗

arXiv2022

Precoder and Decoder Co-Designs for Radar and Communication Spectrum Sharing

Radar and modern communication systems are both evaluating towards higher frequency bands and massive antenna arrays, thus increasing their similarities in terms of hardware structure, channel characteristics, and signal processing pipelines. To suppress the cross-system interference caused by communications and radar systems with shared spectral and hardware resources, the co-design philosophy, wherein the communications and radar/sensing systems can operate in parallel with jointly optimized performance, has drawn substantial attention from both academia and industry. In this paper, we propose a nullspace-based joint precoder-decoder design for spectrum sharing between multicarrier radar and multiuser multicarrier communication systems, by employing the maximizing signal interference noise ratio (max-SINR) criterion and interference alignment (IA) constraints. By projecting the cross-system interference to the designed null spaces, a maximum degree of freedom upper bound for the $K+1$-radar-communication-user interference channel can be achieved. Our simulation studies demonstrate that interference can be practically fully canceled in both communication and radar systems. This leads to improved detection performance in radar and a higher rate in communication subsystems. A significant performance gain over a nullspace-based precoder-only design is also obtained.

eess.SP↗

arXiv2022

Optimal Precoding Design for Monostatic ISAC Systems: MSE Lower Bound and DoF Completion

In this letter, we study the parameter estimation performance for monostatic downlink integrated sensing and communications (ISAC) systems. In particular, we analyze the mean squared error (MSE) lower bound for target sensing in the downlink ISAC system that reveals the suboptimality in re-using the conventional communication waveform for sensing. To realize a practical dual-functional waveform, we propose a waveform augmentation strategy that imposes an extra signal structure, namely the degrees-of-freedom (DoF) completion method. The proposed approach is capable of improving the parameter estimation performance of the ISAC system and achieving the derived MSE lower bound. To improve the performance of the proposed strategy, we formulate an MSE minimization problem to design the ISAC precoder, subject to the communication users' signal-interference-plus-noise-ratio (SINR) constraints. Despite the non-convexity of the waveform design problem, we obtain its globally optimal solution via semi-definite relaxation (SDR) and the proposed constructive method. Simulation results validate the proposed DoF completion technology could achieve the derived MSE lower bound and the effectiveness of the MSE-based ISAC waveform design.

cs.IT↗

arXiv2021

Integrating Sensing and Communications for Ubiquitous IoT: Applications, Trends and Challenges

Recent advances in wireless communication and solid-state circuits together with the enormous demands of sensing ability have given rise to a new enabling technology, integrated sensing and communications (ISAC). The ISAC captures two main advantages over dedicated sensing and communication functionalities: 1) Integration gain to efficiently utilize congested resources, and even, 2) Coordination gain to balance dual-functional performance or/and perform mutual assistance. Meanwhile, triggered by ISAC, we are also witnessing a paradigm shift in the ubiquitous IoT architecture, in which the sensing and communication layers are tending to converge into a new layer, namely, the signaling layer. In this paper, we first attempt to introduce a definition of ISAC, analyze the various influencing forces, and present several novel use cases. Then, we complement the understanding of the signaling layer by presenting several key benefits in the IoT era. We classify existing dominant ISAC solutions based on the layers in which integration is applied. Finally, several challenges and opportunities are discussed. We hope that this overview article will serve as a primary starting point for new researchers and offer a bird's-eye view of the existing ISAC-related advances from academia and industry, ranging from solid-state circuitry, signal processing, and wireless communication to mobile computing.

eess.SP↗

arXiv2019

Fixed Region Beamforming using Frequency Diverse Subarray for Secure Mmwave Wireless Communications

Millimeter-wave (mmWave) using conventional phased array (CPA) enables highly directional and fixed angular beamforming (FAB), therefore enhancing physical layer security (PLS) in the angular domain. However, as the eavesdropper is located in the direction pointed by the mainlobe of the information-carrying beam, information leakage is inevitable and FAB cannot guarantee PLS performance. To address this threat, we propose a novel fixed region beamforming (FRB) by employing a frequency diverse subarray (FDSA) architecture to enhance the PLS performance for mmWave directional communications. In particular, we carefully introduce multiple frequency offset increments (FOIs) across subarrays to achieve a sophisticated beampattern synthesis that ensures a confined information transmission only within the desired angle-range region (DARR) in close vicinity of the target user. More specifically, we formulate the secrecy rate maximization problem with FRB over possible subarray FOIs, and consider two cases of interests, i.e., without/with the location information of eavesdropping, both turn out to be NP-hard. For the unknown eavesdropping location case, we propose a seeker optimization algorithm to minimize the maximum sidelobe peak of the beampattern outside the DARR. As for the known eavesdropping location case, a block coordinate descend linear approximation algorithm is proposed to minimize the sidelobe level in the eavesdropping region. By using the proposed FRB, the mainlobes of all subarrays are constructively superimposed in the DARR while the sidelobes are destructively overlayed outside the DARR. Therefore, FRB takes prominent effect on confining information transmission within the DARR. Numerical simulations demonstrate that the proposed FDSA-based FRB can provide superior PLS performance over the CPA-based FAB.

cs.IT↗