arXiv subjects

Xiaoxing Xia

Publications and source records attributed to Xiaoxing Xia.

7 recordsLinked to original sources

arXiv2026

Design and fabrication of a micro-ion trap with a 3D-printed loading zone for improved hot-ion capture

We leverage recent advances in 3D-printing technology to design and fabricate a micro-ion trap with a spatially distinct loading zone for more efficient loading of ions from effusive thermal ovens. The design reduces the Mathieu-$q$ parameter in the loading zone by increasing the ion-electrode separation $r_0$, thereby potentially facilitating more effective laser cooling of hot ions. This circumvents the temporary thermal instability that arises when the rf potential is reduced during ion loading, a common practice to enable efficient laser cooling of hot ions. Simulations predict that expanding $r_0$ maintains a high trapped ion fraction from a simulated thermal source across a wide range of Mathieu-$q$ parameters. We demonstrate the manufacturability of this design by 3D-printing the rf rails of a four-rod ion trap and discuss the limitations imposed by state-of-the-art additive manufacturing techniques. We briefly compare hot-ion capture in the three-dimensional design presented here with that in a representative planar trap, illustrating one instance in which the former may be better for loading. The article concludes with an outlook for how this design may be incorporated into a quantum-CCD architecture to enhance ion loading and reduce associated experimental overheads.

physics.atom-ph↗

arXiv2025

Feasibility Study of 3D-Printed Micro Junction Array for Ion Trap Quantum Processor

We introduce an ion trap platform based on a 3D-printed micro-junction array, designed to implement quantum charge-coupled device (QCCD) architectures for large-scale quantum information processing (QIP). The integration of three-dimensionally structured micro Radio-Frequency (RF) electrodes above a surface-electrode trap enables flexible control of electric field profiles across both linear and junction regions. Through simulations, we demonstrate that the linear region exhibits deeper and more harmonic ion confinement with reduced RF drive power compared to conventional planar traps. Crucially, we identify a junction geometry that maintains uniform ion confinement during transport while substantially reducing the pseudopotential barrier. This reduction facilitates low-heating, high-fidelity transport of single- and multi-species ion crystals. Our results establish a viable route toward fault-tolerant quantum computing by enabling modular and scalable QCCD systems based on the state-of-the-art 3D-printing technologies.

quant-ph↗

arXiv2025

Optically Detected Magnetic Resonance Imaging and Sensing Within Functionalized Additively Manufactured Microporous Structures

Quantum sensing with nitrogen-vacancy centers in diamond has emerged as a powerful tool for measuring diverse physical parameters, yet the versatility of these measurement approaches is often limited by the achievable layout and dimensionality of bulk-crystal platforms. Here, we demonstrate a versatile approach to creating designer quantum sensors by surface-functionalizing multiphoton lithography microstructures with NV-containing nanodiamonds. We showcase this capability by fabricating a 150 $μ$m x 150 $μ$m x 150 $μ$m triply periodic minimal surface gyroid structure with millions of attached nanodiamonds. We demonstrate a means to volumetrically image these structures using a refractive index matching confocal imaging technique, and extract ODMR spectra from 1.86 $μ$m x 1.86 $μ$m areas of highly concentrated nanodiamonds across a cross section of the gyroid. Furthermore, the high density of sensing elements enables ensemble temperature measurements with sensitivity of 0.548 °K/$\sqrt{Hz}$ at 5 mW excitation power. This approach to creating quantum-enabled microarchitectures opens new possibilities for multimodal sensing in complex three-dimensional environments.

physics.optics↗

arXiv2024

Polycatenated Architected Materials

Architected materials derive their properties from the geometric arrangement of their internal structural elements. Their designs rely on continuous networks of members to control the global mechanical behavior of the bulk. Here, we introduce a class of materials that consist of discrete concatenated rings or cage particles interlocked in three-dimensional networks, forming polycatenated architected materials (PAMs). We propose a general design framework that translates arbitrary crystalline networks into particles' concatenations and geometries. In response to small external loads, PAMs behave like non-Newtonian fluids, showing both shear-thinning and shear-thickening responses. At larger strains, PAMs behave like lattices and foams, with a nonlinear stress-strain relation. At microscale, we demonstrate that PAMs can change their shapes in response to applied electrostatic charges. PAM's unique properties pave the path for developing stimuli-responsive materials, energy-absorbing systems and morphing architectures.

cond-mat.soft↗

arXiv2024

The Focal-plane Actualized Shifted Technique Realized for a Shack Hartmann Wavefront Sensor (fastrSHWFS)

Astronomical adaptive optics (AO) is a critical approach to enable ground-based diffraction-limited imaging and high contrast science, with the potential to enable habitable exoplanet imaging on future extremely large telescopes. However, AO systems must improve significantly to enable habitable exoplanet imaging. Time lag between the end of an exposure and end of deformable mirror commands being applied in an AO loop is now the dominant error term in many extreme AO systems (e.g., Poyneer et al. 2016), and within that lag component detector read time is becoming non-negligible (e.g., Cetre et al. 2018). This term will decrease as faster detector readout capabilities are developed by vendors. In complement, we have developed a modified Shack Hartmann Wavefront Sensor (SHWFS) to address this problem called the Focal-plane Actualized Shifted Technique Realized for a SHWFS (fastrSHWFS). The novelty of this design is to replace the usual lenslet array with a bespoke pupil-plane phase mask that redistributes the spot pattern on the detector into a rectangular array with a custom aspect ratio (in an extreme case, if the detector size can accommodate it, the array can be a single line). We present the fastrSHWFS concept and preliminary laboratory tests. For some detectors and AO systems, the fastrSHWFS technique can decrease the read time per frame compared to a regular SHWFS by up to 30x, supporting the goal of reduced AO lag needed to eventually enable habitable exoplanet imaging.

astro-ph.IM↗

arXiv2023

3D-Printed Micro Ion Trap Technology for Scalable Quantum Information Processing

Trapped-ion applications, such as in quantum information, precision measurements, optical clocks, and mass spectrometry, rely on specialized high-performance ion traps. The latter applications typically employ traditional machining to customize macroscopic 3D Paul traps, while quantum information processing experiments usually rely on photo-lithographic techniques to miniaturize the traps and meet scalability requirements. Using photolithography, however, it is challenging to fabricate the complex three-dimensional electrode structures required for optimal confinement. Here we address these limitations by adopting a high-resolution 3D printing technology based on two-photon polymerization supporting fabrication of large arrays of high-performance miniaturized 3D traps. We show that 3D-printed ion traps combine the advantages of traditionally machined 3D traps with the miniaturization provided by photolithography by confining single calcium ions in a small 3D-printed ion trap with radial trap frequencies ranging from 2 MHz to 24 MHz. The tight confinement eases ion cooling requirements and allows us to demonstrate high-fidelity coherent operations on an optical qubit after only Doppler cooling. With 3D printing technology, the design freedom is drastically expanded without sacrificing scalability and precision so that ion trap geometries can be optimized for higher performance and better functionality.

quant-ph↗

arXiv2021

Systematic design and experimental demonstration of transmission-type multiplexed acoustic meta-holograms

Acoustic holograms have promising applications in sound-field reconstruction, particle manipulation, ultrasonic haptics and therapy. This paper reports on the theoretical, numerical, and experimental investigation of multiplexed acoustic holograms at both audio and ultrasonic frequencies via a rationally designed transmission-type acoustic metamaterial. The proposed meta-hologram is composed of two Fabry-Perot resonant channels per unit cell, which enables the simultaneous modulation of the transmitted amplitude and phase at two desired frequencies. In contrast to conventional acoustic metamaterial-based holograms, the design strategy proposed here, provides a new degree of freedom (frequency) that can actively tailor holograms that are otherwise completely passive and hence significantly enhances the information encoded in acoustic metamaterials. To demonstrate the multiplexed acoustic metamaterial, we first show the projection of two different high-quality meta-holograms at 14 kHz and 17 kHz, with the patterns of the letters, N and S. We then demonstrate two-channel ultrasound focusing and annular beams generation for the incident ultrasonic frequencies of 35 kHz and 42.5 kHz. These multiplexed acoustic meta-holograms offer a technical advance to tackle the rising challenges in the fields of acoustic metamaterials, architectural acoustics, and medical ultrasound.

physics.app-ph↗