arXiv subjects

Xiaoyu Liao

Publications and source records attributed to Xiaoyu Liao.

5 recordsLinked to original sources

arXiv2022

Broadband Terahertz Quantum Cascade Laser Dual-Comb Sources with Off-Resonant Microwave Injection

Broadband dual-comb spectroscopy has attracted increasing interests due to its unique advantages in high spectral resolution, fast detection, and so on. Although the dual-comb technique is relatively mature in the infrared wavelengths, it is, currently, not commercially capable of practical applications in the terahertz regime due to the lack of high performance broadband terahertz dual-comb sources. In the terahertz frequency range, the electrically pumped quantum cascade laser (QCL) is a suitable candidate for the dual-comb operation. However, free running terahertz QCL dual-comb sources normally show limited optical bandwidths ($\sim$100-200 GHz). Although the resonant microwave injection locking has been widely used to broaden the emission spectra of terahertz QCLs by modulating the laser drive current at the cavity round-trip frequency, it is hard to be employed to broaden the dual-comb bandwidths due to the large phase noise induced by the resonant injection and non-ideal microwave circuits. Therefore, it is challenging to obtain broadband terahertz dual-comb sources that can fully exploits the laser gain bandwidth. Here, we employ an off-resonant microwave injection to significantly broaden the dual-comb bandwidth of a terahertz QCL dual-comb source emitting around 4.2 THz. The measured optical dual-comb bandwidth is broadened from 147 GHz in free running to $>$450 GHz under the off-resonant injection. The broadened dual-comb bandwidth is experimentally proved by the transmission measurements of a filter and a GaAs etalon. By performing a simple numerical analysis based on a rate equation model, we explain that the broadband dual-comb operation under the off-resonant microwave injection could be resulted from a wider lasing bandwidth and a higher degree of phase matching.

physics.optics↗

arXiv2022

Self-Referenced Terahertz Semiconductor Dual-Comb Sources

Employing two frequency combs with a slight difference in repetition frequencies, the dual-comb source shows unique advantages in high precision spectroscopy, imaging, ranging, communications, etc. In the terahertz (THz) frequency range, the electrically pumped quantum cascade laser (QCL) offers the possibility of realizing the compact dual-comb source due to its semiconductor-based chip-scale configuration. Although the active stabilization of a THz QCL dual-comb source was demonstrated by phase locking one of the dual-comb lines, the full stabilization of all dual-comb lines is still challenging. Here, we propose a self-reference method to obtain a fully stabilized dual-comb signal on a pure THz QCL platform. Without using any external locking components, we filter out one dual-comb line and beat it with the whole dual-comb signal, which eliminates the common carrier offset frequency noise and reduces the dual-comb repetition frequency noise. It is experimentally demonstrated that the self-reference technique can significantly improve the long-term stability of the dual-comb signal. A record of the ``maxhold" linewidth of 14.8 kHz (60 s time duration) is obtained by implementing the self-reference technique, while without the self-reference the dual-comb lines show a ``maxhold" linewidth of 2 MHz (15 s time duration). The method provides the simplest way to improve the long-term stability of THz QCL dual-comb sources, which can be further adopted for high precision measurements.

physics.optics↗

arXiv2021

Improved comb and dual-comb operation of terahertz quantum cascade lasers utilizing a symmetric thermal dissipation

In the terahertz frequency range, the quantum cascade laser (QCL) is a suitable platform for the frequency comb and dual-comb operation. Improved comb performances have been always much in demand. In this work, by employing a symmetric thermal dissipation scheme, we report an improved frequency comb and dual-comb operation of terahertz QCLs. Two configurations of cold fingers, i.e., type A and B with asymmetric and symmetric thermal dissipation schemes, respectively, are investigated here. A finite-element thermal analysis is carried out to study the parametric effects on the thermal management of the terahertz QCL. The modeling reveals that the symmetric thermal dissipation (type B) results in a more uniform thermal conduction and lower maximum temperature in the active region of the laser, compared to the traditional asymmetric thermal dissipation scheme (type A). To verify the simulation, experiments are further performed by measuring laser performance and comb characteristics of terahertz QCLs emitting around 4.2 THz mounted on type A and type B cold fingers. The experimental results show that the symmetric thermal dissipation approach (type B) is effective for improving the comb and dual-comb operation of terahertz QCLs, which can be further widely adopted for spectroscopy, imaging, and near-field applications.

physics.optics↗

arXiv2021

Active Stabilization of Terahertz Semiconductor Dual-Comb Laser Sources Employing a Phase Locking Technique

Dual-comb sources with equally spaced and low phase noise frequency lines are of great importance for high resolution spectroscopy and metrology. In the terahertz frequency range, electrically pumped semiconductor quantum cascade lasers (QCLs) are suitable candidates for frequency comb and dual-comb operation. For a single laser frequency comb, the repetition rate can be locked using a microwave injection locking and the carrier frequency can be locked to a highly stable source. However, for the locking of two laser combs, four frequencies (two repetition rates and two carrier offset frequencies) should be simultaneously locked; If one only refers to the dual-comb signal, two relative frequencies, i.e., the offset frequency and repetition frequency of one laser against those of the other laser, should be locked. Although the locking techniques that have been successfully used for a single laser comb can be, in principle, applied to a dual-comb laser source, the complete locking considerably complicates the implementation of such a system. Here, we propose a method to stabilize a terahertz QCL dual-comb source by phase locking one of the dual-comb lines to a radio frequency (RF) synthesizer. This technique forces one of the lasers to follow the tone of the other one (keeping the sum of the carrier offset frequency difference and repetition frequency difference between the two laser combs as a constant) by exploiting a laser self-detection that avoids the use of an external detector. Through the demonstration of this locking technique, we demonstrate that the dual-comb can generate periodic pulses over a 2 us time scale, showing that the terahertz QCL comb without a control of the repetition rate can produce pulsed-type waveforms.

physics.app-ph↗

arXiv2019

Towards Compact and Real-Time Terahertz Dual-Comb Spectroscopy Employing a Self-Detection Scheme

Due to its fast and high resolution characteristics, dual-comb spectroscopy has attracted an increasing amount of interest since its first demonstration. In the terahertz frequency range where abundant absorption lines (finger prints) of molecules are located, multiheterodyne spectroscopy that employs the dual-comb technique shows an advantage in real-time spectral detection over the traditional Fourier transform infrared or time domain spectroscopies. Here, we demonstrate compact terahertz dual-comb spectroscopy based on quantum cascade lasers (QCLs). In our experiment, two free-running QCLs generate approximately 120 GHz wide combs centered at 4.2 THz, with slightly different repetition frequencies. We observe that $\sim$490 nW terahertz power coupling of one laser into the other suffices for laser-self-detecting the dual-comb spectrum that is registered by a microwave spectrum analyzer. Furthermore, we demonstrate practical terahertz transmission dual-comb spectroscopy with our device, by implementing a short air path at room temperature. Spectra are shown of semiconductor samples and of moist air, the latter allowing rapid monitoring of the relative humidity. Our devices should be readily extendable to perform imaging, microscopy and near-field microscopy in the terahertz regime.

physics.optics↗