arXiv subjects

Xiayu Linpeng

Publications and source records attributed to Xiayu Linpeng.

At least 19 recordsLinked to original sources

arXiv2026

Real-time Surface-Code Error Correction Using an FPGA-based Neural-Network Decoder

Quantum error correction (QEC) is essential for achieving low error rates required for fault-tolerant quantum computation. In stabilizer-based codes such as the surface code, errors are inferred from repeated syndrome measurements and corrected by a classical decoder. To prevent error accumulation, decoding must be performed with both high throughput and low latency to keep pace with the QEC cycle and enable real-time feedback for universal logical operations. Here we report a hardware-integrated control architecture featuring an FPGA-based neural-network (NN) decoder and experimentally demonstrate real-time surface-code (distance-3) QEC on a superconducting quantum processor. The system achieves a deterministic closed-loop latency of 550 ns, including 124 ns for NN decoding, enabling feedback corrections within a 1.25 us QEC cycle. We show that real-time decoding and feedback correction achieve logical performance comparable to offline decoding while maintaining robustness against varying error conditions. We further demonstrate mid-circuit feedback correction in non-Clifford logical circuits, where Pauli-frame updating alone becomes insufficient. Our results establish a low-latency hardware architecture for embedded QEC control and provide a pathway towards scalable fault-tolerant quantum computing systems.

quant-ph↗

arXiv2026

Quantum Charging Advantage in Superconducting Solid-State Batteries

Quantum battery, as a novel energy storage device, offers the potential for unprecedented efficiency and performance beyond the capabilities of classical systems, with broad implications for future quantum technologies. Here, we experimentally \RefC{demonstrate quantum charging advantage (QCA)} in a scalable solid-state quantum battery. More specifically, we show how double-excitation Hamiltonians for two-level systems promote scalable QCA \RefB{with standard methods.} We effectively implement the collective evolution of quantum systems with 2 up to 12 battery cells in a superconducting quantum processor, and study the performance of quantum charging compared to its uncorrelated classical counterpart. The model considered is a linear chain of superconducting transmon qubits with only \textit{nearest-neighbor} and \textit{pairwise} interactions, which constitute the simplest model of a multi-cell quantum battery. Our results empirically realize substantial QCA without the necessity of adopting long-range and many-body interactions \RefB{ and showcase the quantum features of the QB charging processes with measurements of non-zero coherent ergotropy, incoherent ergotropy and entanglement,} revealing a promising prospect for further developments of efficient and experimentally feasible protocols for QCA.

quant-ph↗

arXiv2025

High-performance multiplexed readout of superconducting qubits with a tunable broadband Purcell filter

Fast, high-fidelity, and low back-action readout plays a crucial role in the advancement of quantum error correction (QEC). Here, we demonstrate high-performance multiplexed readout of superconducting qubits using a tunable broadband Purcell filter, effectively resolving the fundamental trade-off between measurement speed and photon-noise-induced dephasing. By dynamically tuning the filter parameters, we suppress photon-noise-induced dephasing by a factor of 7 in idle status, while enabling rapid, high-fidelity readout in measurement status. We achieve 99.6\% single-shot readout fidelity with 100~ns readout pulse, limited primarily by relaxation errors during readout. Using a multilevel readout protocol, we further attain 99.9\% fidelity in 50~ns. Simultaneous readout of three qubits using 100~ns pulses achieves an average fidelity of 99.5\% with low crosstalk. Additionally, the readout exhibits high quantum-nondemolition (QND) performance: 99.4\% fidelity over repeated measurements and a low leakage rate below 0.1\%. Building on the tunable broadband filter, we further propose a scalable readout scheme for surface code QEC with enhanced multiplexing capability, offering a promising solution for fast and scalable QEC.

quant-ph↗

arXiv2025

State Similarity in Modular Superconducting Quantum Processors with Classical Communications

As quantum devices continue to scale, distributed quantum computing emerges as a promising strategy for executing large-scale tasks across modular quantum processors. A central challenge in this paradigm is verifying the correctness of computational outcomes when subcircuits are executed independently following circuit cutting. Here we propose a cross-platform fidelity estimation algorithm tailored for modular architectures. Our method achieves substantial reductions in sample complexity compared to previous approaches designed for single-processor systems. We experimentally implement the protocol on modular superconducting quantum processors with up to 6 qubits to verify the similarity of two 11-qubit GHZ states. Beyond verification, we show that our algorithm enables a federated quantum kernel method that preserves data privacy. As a proof of concept, we apply it to a 5-qubit quantum phase learning task using six 3-qubit modules, successfully extracting phase information with just eight training samples. These results establish a practical path for scalable verification and trustworthy quantum machine learning of modular quantum processors.

quant-ph↗

arXiv2025

A Low-Noise and High-Stability DC Source for Superconducting Quantum Circuits

With the rapid scaling of superconducting quantum processors, electronic control systems relying on commercial off-the-shelf instruments face critical bottlenecks in signal density, power consumption, and crosstalk mitigation. Here we present a custom dual-channel direct current (DC) source module (QPower) dedicated for large-scale superconducting quantum processors. The module delivers a voltage range of $\pm$7 V with 200 mA maximum current per channel, while achieving the following key performance benchmarks: noise spectral density of 20 nV/$\sqrt{\mathrm{Hz}}$ at 10 kHz, output ripple $<$500 $\mu$V$_{\mathrm{pp}}$ within 20 MHz bandwidth, and long-term voltage drift $<$5 $\mu$V$_{\mathrm{pp}}$ over 12 hours. Integrated into the control electronics of a 66-qubit quantum processor, QPower enables qubit coherence times of $T_1 = 87.6~\mu\mathrm{s}$ and Ramsey $T_2 = 5.1~\mu\mathrm{s}$, with qubit resonance frequency drift constrained to $\pm$40 kHz during 12-hour operation. This modular design is compact in size and efficient in energy consumption, providing a scalable DC source solution for intermediate-scale quantum processors with stringent noise and stability requirements, with potential extensions to other quantum hardware platforms and precision measurement.

quant-ph↗

arXiv2025

Logical multi-qubit entanglement with dual-rail superconducting qubits

Recent advances in quantum error correction (QEC) across hardware platforms have demonstrated operation near and beyond the fault-tolerance threshold, yet achieving exponential suppression of logical errors through code scaling remains a critical challenge. Erasure qubits, which enable hardware-level detection of dominant error types, offer a promising path toward resource-efficient QEC by exploiting error bias. Single erasure qubits with dual-rail encoding in superconducting cavities and transmons have demonstrated high coherence and low single-qubit gate errors with mid-circuit erasure detection, but the generation of multi-qubit entanglement--a fundamental requirement for quantum computation and error correction--has remained an outstanding milestone. Here, we demonstrate a superconducting processor integrating four dual-rail erasure qubits that achieves the logical multi-qubit entanglement with error-biased protection. Each dual-rail qubit, encoded in pairs of tunable transmons, preserves millisecond-scale coherence times and single-qubit gate errors at the level of $10^{-5}$. By engineering tunable couplings between logical qubits, we generate high-fidelity entangled states resilient to physical qubit noise, including logical Bell states (98.8% fidelity) and a three-logical-qubit Greenberger-Horne-Zeilinger (GHZ) state (93.5% fidelity). A universal gate set is realized through a calibrated logical controlled-NOT (CNOT) gate with 96.2% process fidelity, enabled by coupler-activated $XX$ interactions in the protected logical subspace. This work advances dual-rail architectures beyond single-qubit demonstrations, providing a blueprint for concatenated quantum error correction with erasure qubits.

quant-ph↗

arXiv2025

Logical operations with a dynamical qubit in Floquet-Bacon-Shor code

Quantum error correction (QEC) protects quantum systems against inevitable noises and control inaccuracies, providing a pathway towards fault-tolerant (FT) quantum computation. Stabilizer codes, including surface code and color code, have long been the focus of research and have seen significant experimental progress in recent years. Recently proposed time-dynamical QEC, including Floquet codes and generalized time-dynamical code implementations, opens up new opportunities for FT quantum computation. By employing a periodic schedule of low-weight parity checks, Floquet codes can generate additional dynamical logical qubits, offering enhanced error correction capabilities and potentially higher code performance. Here, we experimentally implement the Floquet-Bacon-Shor code on a superconducting quantum processor. We encode a dynamical logical qubit within a $3\times 3$ lattice of data qubits, alongside a conventional static logical qubit. We demonstrate FT encoding and measurement of the two-qubit logical states, and stabilize these states using repeated error detection. We showcase universal single-qubit logical gates on the dynamical qubit. Furthermore, by implementing a logical CNOT gate, we entangle the dynamical and static logical qubits, generating an error-detected logical Bell state with a fidelity of 75.9\%. Our results highlight the potential of Floquet codes for resource-efficient FT quantum computation.

quant-ph↗

arXiv2025

A thermal-noise-resilient microwave quantum network traversing 4 K

Quantum communication at microwave frequencies has been fundamentally constrained by the susceptibility of microwave photons to thermal noise, hindering their application in scalable quantum networks. Here we demonstrate a thermal-noise-resilient microwave quantum network that establishes coherent coupling between two superconducting qubits through a 4 K thermalized niobium-titanium transmission line. By overcoupling the communication channel to a cold load at 10 mK, we suppress the effective thermal occupancy of the channel to 0.06 photons through radiative cooling -- a two-order-of-magnitude reduction below ambient thermal noise. We then decouple the cold load and rapidly transfer microwave quantum states through the channel while it rethermalizes, achieving a 58.5% state transfer fidelity and a 52.3% Bell entanglement fidelity, both exceeding the classical communication threshold. Our architecture overcomes the temperature-compatibility barrier for microwave quantum systems, providing a scalable framework for distributed quantum computing and enabling hybrid quantum networks with higher-temperature semiconductor or photonic platforms.

quant-ph↗

arXiv2025

Experimental observation of exact quantum critical states

Anderson localization physics features three fundamental types of eigenstates: extended, localized, and critical, with the third one exhibiting the exotic properties in-between the former two. Confirming the presence of critical states is challenging, as it typically necessitates either advancing the analysis to the thermodynamic limit or identifying a universal mechanism which can rigorously determine these states. Here we report the unambiguous experimental realization of critical states, governed by a rigorous mechanism for exact quantum critical states, and further observe a generalized mechanism that quasiperiodic zeros in hopping couplings protect the critical states. We implement a programmable quasiperiodic mosaic model with tunable couplings and on-site potentials through a multiple superconducting qubit quantum system. By measuring the time-evolving observables, we identify the coexisting delocalized dynamics and incommensurately distributed zeros in the couplings, which are the defining features of the critical states. We map the localized-to-critical phase transition and demonstrate that critical states persist until quasiperiodic zeros are removed by strong long-range couplings, highlighting a novel generalized mechanism discovered in this experiment and shown with rigorous theory. Finally, we resolve the energy-dependent transition between localized and critical states, revealing the presence of anomalous mobility edges.

quant-ph↗

arXiv2025

Improving Quantum Optimization to Achieve Quadratic Time Complexity

Quantum Approximate Optimization Algorithm (QAOA) is a promising candidate for achieving quantum advantage in combinatorial optimization. However, its variational framework presents a long-standing challenge in selecting circuit parameters. In this work, we prove that the energy expectation produced by QAOA can be expressed as a trigonometric function of the final-level mixer parameter. Leveraging this insight, we introduce Penta-O, a level-wise parameter-setting strategy that eliminates the classical outer loop, maintains minimal sampling overhead, and ensures non-decreasing performance. This method is broadly applicable to the generic quadratic unconstrained binary optimization formulated as the Ising model. For a $p$-level QAOA, Penta-O achieves an unprecedented quadratic time complexity of $\mathcal{O}(p^2)$ and a sampling overhead proportional to $5p+1$. Through experiments and simulations, we demonstrate that QAOA enhanced by Penta-O achieves near-optimal performance with exceptional circuit depth efficiency. Our work provides a versatile tool for advancing variational quantum algorithms.

quant-ph↗

arXiv2025

Synthetic $\pi$-flux system in 2D superconducting qubit array with tunable coupling

Flat-band systems provide an ideal platform for exploring exotic quantum phenomena, where the strongly suppressed kinetic energy in these flat energy bands suggests the potential for exotic phases driven by geometric structure, disorder, and interactions. While intriguing phenomena and physical mechanisms have been unveiled in theoretical models, synthesizing such systems within scalable quantum platforms remains challenging. Here, we present the experimental realization of a $\pi$-flux rhombic system using a two-dimensional superconducting qubit array with tunable coupling. We experimentally observe characteristic dynamics, e.g., $\pi$-flux driven destructive interference, and demonstrate the protocol for eigenstate preparation in this rhombic array with coupler-assisted flux. Our results provide future possibilities for exploring the interplay of geometry, interactions, and quantum information encoding in such degenerate systems.

quant-ph↗

arXiv2024

A C-Band Cryogenic GaAs MMIC Low-Noise Amplifier for Quantum Applications

Large-scale superconducting quantum computers require massive numbers of high-performance cryogenic low-noise amplifiers (cryo-LNA) for qubit readout. Here we present a C-Band monolithic microwave integrated circuit (MMIC) cryo-LNA for this purpose. This cryo-LNA is based on 150 nm GaAs pseudomorphic high electron mobility transistor (pHEMT) process and implemented with a three-stage cascaded architecture, where the first stage adopts careful impedance match to optimize the noise and return loss. The integration of negative feedback loops adopted in the second and third-stage enhances the overall stability. Moreover, the pHEMT-self bias and current multiplexing circuitry structure facilitate the reduction of power consumption and require only single bias line. Operating at an ambient temperature of 3.6 K and consuming 15 mW, the cryo-LNA demonstrates good performance in the C-band, reaching a 5 K equivalent noise temperature and an average gain of 40 dB. We further benchmark this cryo-LNA with superconducting qubits, achieving an average single-shot dispersive readout fidelity of 98.3% without assistance from a quantum-limited parametric amplifier. The development of GaAs cryo-LNA diversifies technical support necessary for large-scale quantum applications.

quant-ph↗

arXiv2024

Distributed multi-parameter quantum metrology with a superconducting quantum network

Quantum metrology has emerged as a powerful tool for timekeeping, field sensing, and precision measurements in fundamental physics. With the advent of distributed quantum metrology, its capabilities have extended to probing spatially distributed parameters across networked quantum systems. However, scalable implementations of distributed quantum metrology with multi-parameter estimation remain limited, particularly due to the challenges of generating and distributing entanglement across a quantum network and dealing with incompatibilities in multi-parameter quantum metrology. Here we demonstrate distributed multi-parameter quantum metrology on a modular superconducting quantum network with low-loss microwave interconnects, a platform that uniquely combines fast gate operations, adaptive control, and deterministic non-local entanglement generation. Using a control-enhanced sequential protocol, we estimate all three components of a remote vector field, achieving up to 13.72 dB improvement in precision over the individual strategy. We further perform direct estimation of vector field gradients along two directions across spatially separated nodes, realizing a 3.44 dB gain over local entanglement strategies. These results establish superconducting quantum networks as a competitive and reconfigurable platform for scalable multi-parameter distributed quantum metrology.

quant-ph↗

arXiv2024

Dephasing-assisted diffusive dynamics in superconducting quantum circuits

Random fluctuations caused by environmental noise can lead to decoherence in quantum systems. Exploring and controlling such dissipative processes is both fundamentally intriguing and essential for harnessing quantum systems to gain practical advantages and deeper insights. In this work, we first demonstrate the diffusive dynamics assisted by controlled dephasing noise in superconducting quantum circuits, contrasting with coherent evolution. We show that dephasing can give distinct dynamical behavior in a superconducting qubit array with quasiperiodic order. Furthermore, by preparing different excitation distributions in the qubit array, we observe that a more localized initial state relaxes to a uniformly distributed mixed state faster with dephasing noise, illustrating another counterintuitive phenomenon called Mpemba-effect-like quantum dynamics, i.e., a far-from-equilibrium state can relax toward the equilibrium faster. These results deepen our understanding of diffusive dynamics at the microscopic level, and demonstrate controlled dissipative processes as a valuable tool for investigating Markovian open quantum systems.

quant-ph↗

arXiv2024

M2CS: A Microwave Measurement and Control System for Large-scale Superconducting Quantum Processors

As superconducting quantum computing continues to advance at an unprecedented pace, there is a compelling demand for the innovation of specialized electronic instruments that act as crucial conduits between quantum processors and host computers. Here, we introduce a Microwave Measurement and Control System (M2CS) dedicated for large-scale superconducting quantum processors. M2CS features a compact modular design that balances overall performance, scalability, and flexibility. Electronic tests of M2CS show key metrics comparable to commercial instruments. Benchmark tests on transmon superconducting qubits further show qubit coherence and gate fidelities comparable to state-of-the-art results, confirming M2CS's capability to meet the stringent requirements of quantum experiments run on intermediate-scale quantum processors. The system's compact and scalable design offers significant room for further enhancements that could accommodate the measurement and control requirements of over 1000 qubits, and can also be adopted to other quantum computing platforms such as trapped ions and silicon quantum dots. The M2CS architecture may also be applied to wider range of scenarios, such as microwave kinetic inductance detectors, as well as phased array radar systems.

quant-ph↗

arXiv2024

In situ mixer calibration for superconducting quantum circuits

Mixers play a crucial role in superconducting quantum computing, primarily by facilitating frequency conversion of signals to enable precise control and readout of quantum states. However, imperfections, particularly carrier leakage and unwanted sideband signal, can significantly compromise control fidelity. To mitigate these defects, regular and precise mixer calibrations are indispensable, yet they pose a formidable challenge in large-scale quantum control. Here, we introduce an in situ calibration technique and outcome-focused mixer calibration scheme using superconducting qubits. Our method leverages the qubit's response to imperfect signals, allowing for calibration without modifying the wiring configuration. We experimentally validate the efficacy of this technique by benchmarking single-qubit gate fidelity and qubit coherence time.

quant-ph↗

arXiv2024

Coupler-Assisted Leakage Reduction for Scalable Quantum Error Correction with Superconducting Qubits

Superconducting qubits are a promising platform for building fault-tolerant quantum computers, with recent achievement showing the suppression of logical error with increasing code size. However, leakage into non-computational states, a common issue in practical quantum systems including superconducting circuits, introduces correlated errors that undermine QEC scalability. Here, we propose and demonstrate a leakage reduction scheme utilizing tunable couplers, a widely adopted ingredient in large-scale superconducting quantum processors. Leveraging the strong frequency tunability of the couplers and stray interaction between the couplers and readout resonators, we eliminate state leakage on the couplers, thus suppressing space-correlated errors caused by population propagation among the couplers. Assisted by the couplers, we further reduce leakage to higher qubit levels with high efficiency (98.1%) and low error rate on the computational subspace (0.58%), suppressing time-correlated errors during QEC cycles. The performance of our scheme demonstrates its potential as an indispensable building block for scalable QEC with superconducting qubits.

quant-ph↗

arXiv2023

Quantum energetics of a non-commuting measurement

When a measurement observable does not commute with a quantum system's Hamiltonian, the energy of the measured system is typically not conserved during the measurement. Instead, energy can be transferred between the measured system and the meter. In this work, we experimentally investigate the energetics of non-commuting measurements in a circuit quantum electrodynamics system containing a transmon qubit embedded in a 3D microwave cavity. We show through spectral analysis of the cavity photons that a frequency shift is imparted on the probe, in balance with the associated energy changes of the qubit. Our experiment provides new insights into foundations of quantum measurement, as well as a better understanding of the key mechanisms at play in quantum energetics.

quant-ph↗