arXiv subjects

Xifan Wu

Publications and source records attributed to Xifan Wu.

At least 19 recordsLinked to original sources

arXiv2026

Understanding the Density Maximum of Water with Machine Learned Potentials

After melting, at ambient pressure, the density of water continues to increase with temperature until it reaches a maximum around 4 °C. For nearly a century, this phenomenon has been qualitatively attributed to a mixture of ordered and disordered structures. Herein, we employ a deep neural network to train a machine learned (ML) interatomic potential for water using electronic structure data from advanced density functional theory. Notably, molecular dynamics simulations with the ML potential reproduce both the experimental water density anomaly and the thermal expansion coefficient. Detailed structural analysis of the computed hydrogen-bond network reveals that the density anomaly arises from an emergent liquid structure that retains nearly ideal tetrahedral coordination at short range but collapses at intermediate range. Our findings point to a more delicate mechanism causing the density maximum than the conventional picture, emphasizing the collective roles of structural orderings at different length scales.

physics.chem-ph↗

arXiv2026

Ab initio electronic conductivity of Fe-bearing post-perovskite

The electrical conductivity of high-pressure silicates profoundly influences the interior dynamics of rocky planets. Employing the Kubo-Greenwood formalism, we perform ab initio calculations of electronic conductivity in Fe-bearing post-perovskite under super-Earth mantle conditions, up to 4000 K and 500 GPa. Electronic structures are obtained via many-body perturbation theory, incorporating dynamical screening and correlations among localized Fe-3d orbitals. In contrast to (Fe,Mg)O, for which metallization has been reported at comparable conditions, our results indicate that post-perovskite with Earth-like Fe contents is unlikely to metallize in super-Earth mantles via band-gap closure, yielding negligible low-frequency conductivity. Any substantial conductivity would require non-electronic mechanisms, such as thermally activated small-polaron hopping, which fall beyond the scope of band conduction.

cond-mat.mtrl-sci↗

arXiv2025

Simulations of dielectric permittivity of water by Machine Learned Potentials with long-range Coulombic interactions

The dielectric permittivity of liquid water is a fundamental property that underlies its distinctive behaviors in numerious physical, biological, and chemical processes. Within a machine learning framework, we present a unified approach to compute the dielectric permittivity of water, systematically incorporating various electric boundary conditions. Our method employs a long-range-inclusive deep potential trained on data from hybrid density functional theory calculations. Dielectric response is evaluated using an auxiliary deep neural network that predicts the centers of maximally localized Wannier functions. We investigate three types of electric boundary conditions--metallic, insulating, and Kirkwood-Frohlich--to assess their influence on correlated dipole fluctuations and dielectric relaxation dynamics. In particular, we demonstrate a consistent methodology for computing the Kirkwood correlation factor, correlation length, and dielectric permittivity under each boundary condition, where long-range electrostatics play a critical role. This work establishes a robust and generalizable machine-learning framework for modeling the dielectric properties of polar liquids under diverse electrostatic environments.

cond-mat.soft↗

arXiv2025

Pressure-Induced Structural and Dielectric Changes in Liquid Water at Room Temperature

Understanding the pressure-dependent dielectric properties of water is crucial for a wide range of scientific and practical applications. In this study, we employ a deep neural network trained on density functional theory data to investigate the dielectric properties of liquid water at room temperature across a pressure range of 0.1 MPa to 1000 MPa. We observe a nonlinear increase in the static dielectric constant $ε_0$ with increasing pressure, a trend that is qualitatively consistent with experimental observations. This increase in $ε_0$ is primarily attributed to the increase in water density under compression, which enhances collective dipole fluctuations within the hydrogen-bonding network as well as the dielectric response. Despite the increase in $ε_0$, our results reveal a decrease in the Kirkwood correlation factor $G_K$ with increasing pressure. This decrease in $G_K$ is attributed to pressure-induced structural distortions in the hydrogen-bonding network, which weaken dipolar correlations by disrupting the ideal tetrahedral arrangement of water molecules.

cond-mat.mtrl-sci↗

arXiv2024

Optical absorption spectroscopy probes water wire and its ordering in a hydrogen-bond network

Water wires, quasi-one-dimensional chains composed of hydrogen-bonded (H-bonded) water molecules, play a fundamental role in numerous chemical, physical, and physiological processes. Yet direct experimental detection of water wires has been elusive so far. Based on advanced $ab$ $initio$ many-body theory that includes electron-hole interactions, we report that optical absorption spectroscopy can serve as a sensitive probe of water wires and their ordering. In both liquid and solid water, the main peak of the spectrum is discovered to be a charge transfer exciton. In water, the charge transfer exciton is strongly coupled to the H-bonding environment where the exciton is excited between H-bonded water molecules with a large spectral intensity. In regular ice, the spectral weight of the charge transfer exciton is enhanced by a collective excitation occurring on proton-ordered water wires, whose spectral intensity scales with the ordering length of water wire. The spectral intensity and excitonic interaction strength reaches its maximum in ice XI, where the long-range ordering length yields the most pronounced spectral signal. Our findings suggest that water wires, which widely exist in important physiological and biological systems and other phases of ice, can be directly probed by this approach.

cond-mat.mtrl-sci↗

arXiv2024

Electrical double layer and capacitance of TiO2 electrolyte interfaces from first principles simulations

The electrical double layer (EDL) at aqueous solution-metal oxide interfaces critically affects many fundamental processes in electrochemistry, geology and biology, yet understanding its microscopic structure is challenging for both theory and experiments. Here we employ ab initio-based machine learning potentials including long-range electrostatics in large-scale atomistic simulations of the EDL at the TiO2-electrolyte interface. Our simulations provide a molecular-scale picture of the EDL that demonstrates the limitations of standard mean-field models. We further develop a method to accurately calculate the electrostatic potential drop at the interface. The computed capacitance originating from the adsorbed charges and the potential drop agrees with experiments, supporting the reliability of our description of the EDL. The larger interfacial capacitance of basic relative to acidic solutions originates from the higher affinity of the cations for the oxide surface and gives rise to distinct charging mechanisms on negative and positive surfaces.

physics.chem-ph↗

arXiv2023

Exploring the Impact of Ions on Oxygen K-Edge X-ray Absorption Spectroscopy in NaCl Solution using the GW-Bethe-Salpeter-Equation Approach

X-ray absorption spectroscopy (XAS) is a powerful experimental tool to probe the local structure in materials with the core hole excitations. Here, the oxygen K-edge XAS spectra of the NaCl solution and pure water are computed by using a recently developed GW-BSE approach, based on configurations modeled by path-integral molecular dynamics with the deep-learning technique. The neural network is trained on ab initio data obtained with SCAN density functional theory. The observed changes in the XAS features of the NaCl solution, compared to those of pure water, are in good agreement between experimental and theoretical results. We provided detailed explanations for these spectral changes that occur when NaCl is solvated in pure water. Specifically, the presence of solvating ion pairs leads to localization of electron-hole excitons. Our theoretical XAS results support the theory that the effects of the solvating ions on the H-bond network are mainly confined within the first hydration shell of ions, however beyond the shell the arrangement of water molecules remains to be comparable to that observed in pure water.

cond-mat.mtrl-sci↗

arXiv2023

Why does dissolving salt in water decrease its dielectric permittivity

The dielectric permittivity of salt water decreases on dissolving more salt. For nearly a century, this phenomenon has been explained by invoking saturation in the dielectric response of the solvent water molecules. Herein, we employ an advanced deep neural network (DNN), built using data from density functional theory, to study the dielectric permittivity of sodium chloride solutions. Notably, the decrease in the dielectric permittivity as a function of concentration, computed using the DNN approach, agrees well with experiments. Detailed analysis of the computations reveals that the dominant effect, caused by the intrusion of ionic hydration shells into the solvent hydrogen-bond network, is the disruption of dipolar correlations among water molecules. Accordingly, the observed decrease in the dielectric permittivity is mostly due to increasing suppression of the collective response of solvent waters.

cond-mat.soft↗

arXiv2022

DeePKS+ABACUS as a Bridge between Expensive Quantum Mechanical Models and Machine Learning Potentials

Recently, the development of machine learning (ML) potentials has made it possible to perform large-scale and long-time molecular simulations with the accuracy of quantum mechanical (QM) models. However, for high-level QM methods, such as density functional theory (DFT) at the meta-GGA level and/or with exact exchange, quantum Monte Carlo, etc., generating a sufficient amount of data for training a ML potential has remained computationally challenging due to their high cost. In this work, we demonstrate that this issue can be largely alleviated with Deep Kohn-Sham (DeePKS), a ML-based DFT model. DeePKS employs a computationally efficient neural network-based functional model to construct a correction term added upon a cheap DFT model. Upon training, DeePKS offers closely-matched energies and forces compared with high-level QM method, but the number of training data required is orders of magnitude less than that required for training a reliable ML potential. As such, DeePKS can serve as a bridge between expensive QM models and ML potentials: one can generate a decent amount of high-accuracy QM data to train a DeePKS model, and then use the DeePKS model to label a much larger amount of configurations to train a ML potential. This scheme for periodic systems is implemented in a DFT package ABACUS, which is open-source and ready for use in various applications.

physics.chem-ph↗

arXiv2022

Structural and Dynamic Properties of Solvated Hydroxide and Hydronium Ions in Water from Ab Initio Modeling

Predicting the asymmetric structure and dynamics of solvated hydroxide and hydronium in water has been a challenging task from ab initio molecular dynamics (AIMD). The difficulty mainly comes from a lack of accurate and efficient exchange-correlation functional in elucidating the amphiphilic nature and the ubiquitous proton transfer behaviors of the two ions. By adopting the strongly-constrained and appropriately normed (SCAN) meta-GGA functional in AIMD simulations, we systematically examine the amphiphilic properties, the solvation structures, the electronic structures, and the dynamic properties of the two water ions. In particular, we compare these results to those predicted by the PBE0-TS functional, which is an accurate yet computationally more expensive exchange-correlation functional. We demonstrate that the general-purpose SCAN functional provides a reliable choice in describing the two water ions. Specifically, in the SCAN picture of water ions, the appearance of the fourth and fifth hydrogen bonds near hydroxide stabilizes the pot-like shape solvation structure and suppresses the structural diffusion, while the hydronium stably donates three hydrogen bonds to its neighbors. As a result, hydroxide prefers the stepwise proton transfer (PT) while hydronium prefers the concerted PT behavior. Consequently, hydroxide diffuses slower than hydronium in water, which is consistent with the experiments.

physics.chem-ph↗

arXiv2022

Convert widespread paraelectric perovskite to ferroelectrics

While nature provides a plethora of perovskite materials, only a few exhibits large ferroelectricity and possibly multiferroicity. The majority of perovskite materials have the non-polar CaTiO$_3$(CTO)structure, limiting the scope of their applications. Based on effective Hamiltonian model as well as first-principles calculations, we propose a general thin-film design method to stabilize the functional BiFeO$_3$(BFO)-type structure, which is a common metastable structure in widespread CaTiO$_3$-type perovskite oxides. It is found that the improper antiferroelectricity in CTO-type perovskite and ferroelectricity in BFO-type perovskite have distinct dependences on mechanical and electric boundary conditions, both of which involve oxygen octahedral rotation and tilt. The above difference can be used to stabilize the highly polar BFO-type structure in many CTO-type perovskite materials.

cond-mat.mtrl-sci↗

arXiv2022

Dissolving salt is not equivalent to applying a pressure on water

Salt water is ubiquitous, playing crucial roles in geological and physiological processes. Despite centuries of investigations, whether or not water's structure is drastically changed by dissolved ions is still debated. Based on density functional theory, we employ machine learning based molecular dynamics to model sodium chloride, potassium chloride, and sodium bromide solutions at different concentrations. The resulting reciprocal-space structure factors agree quantitatively with neutron diffraction data. Here we provide clear evidence that the ions in salt water do not distort the structure of water in the same way as neat water responds to elevated pressure. Rather, the computed structural changes are restricted to the ionic first solvation shells intruding into the hydrogen bond network, beyond which the oxygen radial-distribution function does not undergo major change relative to neat water. Our findings suggest that the widely cited pressure-like effect on the solvent in Hofmeister series ionic solutions should be carefully revisited.

physics.chem-ph↗

arXiv2022

Many-Body Effects in the X-ray Absorption Spectra of Liquid Water

X-ray absorption spectroscopy (XAS) is a powerful experimental technique to probe the local order in materials with core electron excitations. Experimental interpretation requires supporting theoretical calculations. For water, these calculations are very demanding and, to date, could only be done with major approximations that limited the accuracy of the calculated spectra. This prompted an intense debate on whether a substantial revision of the standard picture of tetrahedrally bonded water was necessary to improve the agreement of theory and experiment. Here, we report a new first-principles calculation of the XAS of water that avoids the approximations of prior work thanks to recent advances in electron excitation theory. The calculated XAS spectra, and their variation with changes of temperature and/or with isotope substitution, are in excellent quantitative agreement with experiments. The approach requires accurate quasi-particle wavefunctions beyond density functional theory approximations, accounts for the dynamics of quasi-particles and includes dynamic screening as well as renormalization effects due to the continuum of valence-level excitations. The three features observed in the experimental spectra are unambiguously attributed to excitonic effects. The pre-edge feature is associated to a bound intramolecular exciton, the main-edge feature is associated to an exciton localized within the coordination shell of the excited molecule, while the post-edge one is delocalized over more distant neighbors, as expected for a resonant state. The three features probe the local order at short, intermediate, and longer range relative to the excited molecule. The calculated spectra are fully consistent with a standard tetrahedral picture of water.

physics.comp-ph↗

arXiv2021

Nuclear quantum effects on the quasiparticle properties of the chloride anion aqueous solution within the GW approximation

Photoelectron spectroscopy experiments in ionic solutions reveal important electronic structure information, in which the interaction between hydrated ions and water solvent can be inferred. Based on many-body perturbation theory with GW approximation, we theoretically compute the quasiparticle electronic structure of chloride anion solution, which is modeled by path-integral $ab$ $initio$ molecular dynamics simulation by taking account the nuclear quantum effects (NQEs). The electronic levels of hydrated anion as well as water are determined and compared to the recent experimental photoelectron spectra. It is found that NQEs improve the agreement between theoretical prediction and experiment because NQEs effectively weaken the hybridization of the between the $\rm Cl^-$ anion and water. Our study indicates that NQEs plays a small but non-negligible role in predicting the electronic structure of the aqueous solvation of ions of the Hofmeister series.

physics.chem-ph↗

arXiv2021

Enabling Large-Scale Condensed-Phase Hybrid Density Functional Theory Based $Ab$ $Initio$ Molecular Dynamics I: Theory, Algorithm, and Performance

By including a fraction of exact exchange (EXX), hybrid functionals reduce the self-interaction error in semi-local density functional theory (DFT), and thereby furnish a more accurate and reliable description of the electronic structure in systems throughout biology, chemistry, physics, and materials science. However, the high computational cost associated with the evaluation of all required EXX quantities has limited the applicability of hybrid DFT in the treatment of large molecules and complex condensed-phase materials. To overcome this limitation, we have devised a linear-scaling yet formally exact approach that utilizes a local representation of the occupied orbitals (e.g., maximally localized Wannier functions, MLWFs) to exploit the sparsity in the real-space evaluation of the quantum mechanical exchange interaction in finite-gap systems. In this work, we present a detailed description of the theoretical and algorithmic advances required to perform MLWF-based ab initio molecular dynamics (AIMD) simulations of large-scale condensed-phase systems at the hybrid DFT level. We provide a comprehensive description of the exx algorithm, which is currently implemented in the Quantum ESPRESSO program and employs a hybrid MPI/OpenMP parallelization scheme to efficiently utilize high-performance computing (HPC) resources. This is followed by a critical assessment of the accuracy and parallel performance of this approach when performing AIMD simulations of liquid water in the canonical ensemble. With access to HPC resources, we demonstrate that exx enables hybrid DFT based AIMD simulations of condensed-phase systems containing 500-1000 atoms with a walltime cost that is comparable to semi-local DFT. In doing so, exx takes us closer to routinely performing AIMD simulations of large-scale condensed-phase systems for sufficiently long timescales at the hybrid DFT level of theory.

physics.comp-ph↗

arXiv2021

Modeling liquid water by climbing up Jacob's ladder in density functional theory facilitated by using deep neural network potentials

Within the framework of Kohn-Sham density functional theory (DFT), the ability to provide good predictions of water properties by employing a strongly constrained and appropriately normed (SCAN) functional has been extensively demonstrated in recent years. Here, we further advance the modeling of water by building a more accurate model on the fourth rung of Jacob's ladder with the hybrid functional, SCAN0. In particular, we carry out both classical and Feynman path-integral molecular dynamics calculations of water with the SCAN0 functional and the isobaric-isothermal ensemble. In order to generate the equilibrated structure of water, a deep neural network potential is trained from the atomic potential energy surface based on ab initio data obtained from SCAN0 DFT calculations. For the electronic properties of water, a separate deep neural network potential is trained using the Deep Wannier method based on the maximally localized Wannier functions of the equilibrated trajectory at the SCAN0 level. The structural, dynamic, and electric properties of water were analyzed. The hydrogen-bond structures, density, infrared spectra, diffusion coefficients, and dielectric constants of water, in the electronic ground state, are computed using a large simulation box and long simulation time. For the properties involving electronic excitations, we apply the GW approximation within many-body perturbation theory to calculate the quasiparticle density of states and bandgap of water. Compared to the SCAN functional, mixing exact exchange mitigates the self-interaction error in the meta-generalized-gradient approximation and further softens liquid water towards the experimental direction. For most of the water properties, the SCAN0 functional shows a systematic improvement over the SCAN functional.

physics.chem-ph↗

arXiv2020

Isotope effects on molecular structures and electronic properties of liquid water via deep potential molecular dynamics based on SCAN functional

Feynman path-integral deep potential molecular dynamics (PI-DPMD) calculations have been employed to study both light (H$_2$O) and heavy water (D$_2$O) within the isothermal-isobaric ensemble. In particular, the deep neural network is trained based on ab initio data obtained from the strongly constrained and appropriately normed (SCAN) exchange-correlation functional. Because of the lighter mass of hydrogen than deuteron, the properties of light water is more influenced by nuclear quantum effect than those of heavy water. Clear isotope effects are observed and analyzed in terms of hydrogen-bond structure and electronic properties of water that are closely associated with experimental observables. The molecular structures of both liquid H$_2$O and D$_2$O agree well with the data extracted from scattering experiments. The delicate isotope effects on radial distribution functions and angular distribution functions are well reproduced as well. Our approach demonstrates that deep neural network combined with SCAN functional based ab initio molecular dynamics provides an accurate theoretical tool for modeling water and its isotope effects.

physics.chem-ph↗

arXiv2020

Isotope effects in x-ray absorption spectra of liquid water

The isotope effects in x-ray absorption spectra of liquid water are studied by a many-body approach within electron-hole excitation theory. The molecular structures of both light and heavy water are modeled by path-integral molecular dynamics based on the advanced deep-learning technique. The neural network is trained on ab initio data obtained with SCAN density functional theory. The experimentally observed isotope effect in x-ray absorption spectra is reproduced semiquantitatively in theory. Compared to the spectrum in normal water, the blueshifted and less pronounced pre- and main-edge in heavy water reflect that the heavy water is more structured at short- and intermediate-range of the hydrogen-bond network. In contrast, the isotope effect on the spectrum is negligible at post-edge, which is consistent with the identical long-range ordering in both liquids as observed in the diffraction experiment.

cond-mat.dis-nn↗