arXiv subjects

Xingchen Ji

Publications and source records attributed to Xingchen Ji.

33 records · Page 2Linked to original sources

arXiv2019

Turn-key, high-efficiency Kerr comb source

We demonstrate an approach for automated Kerr comb generation in the normal group-velocity dispersion (GVD) regime. Using a coupled-ring geometry in silicon nitride, we precisely control the wavelength location and splitting strength of avoided mode crossings to generate low-noise frequency combs with pump-to-comb conversion efficiencies of up to 41%, which is the highest reported to date for normal-GVD Kerr combs. Our technique enables on-demand generation of a high-power comb source for applications such as wavelength-division multiplexing in optical communications.

physics.optics↗

arXiv2019

Chip-based frequency combs sources for optical coherence tomography

The Optical coherence tomography (OCT) is a powerful interferometric imaging technique widely used in medical fields such as ophthalmology, cardiology and dermatology, for which footprint and cost are becoming increasingly important. Here we present a platform for miniaturized sources for OCT based on chip-scale lithographically-defined microresonators. We show that the proposed platform is compatible with standard commercial spectral domain (SD) OCT systems and enable imaging of human tissue with an image quality comparable to the one achieved with tabletop commercial sources. This platform provides a path towards fully integrated OCT systems.

physics.optics↗

arXiv2018

Strong Nonlinear Coupling due to Induced Photon Interaction on a Si$_{3}$N$_{4}$ Chip

Second-order optical processes lead to a host of applications in classical and quantum optics. With the enhancement of parametric interactions that arise due to light confinement, on-chip implementations promise very-large-scale photonic integration. But as yet there is no route to a device that acts at the single photon level. Here we exploit the $χ^{(3)}$ nonlinear response of a Si$_{3}$N$_{4}$ microring resonator to induce a large effective $χ^{(2)}$. Effective second-order upconversion (ESUP) of a seed to an idler can be achieved with 74,000 %/W efficiency, indicating that single photon nonlinearity is within reach of current technology. Moreover, we show a nonlinear coupling rate of seed and idler larger than the energy dissipation rate in the resonator, indicating a strong coupling regime. Consequently we observe a Rabi-like splitting, for which we provide a detailed theoretical description. This yields new insight into the dynamics of ultrastrong effective nonlinear interactions in microresonators, and access to novel phenomena and applications in classical and quantum nonlinear optics.

physics.optics↗

arXiv2018

Synchronization of coupled optical microresonators

The phenomenon of synchronization occurs universally across the natural sciences and provides critical insight into the behavior of coupled nonlinear dynamical systems. It also offers a powerful approach to robust frequency or temporal locking in diverse applications including communications, superconductors, and photonics. Here we report the experimental synchronization of two coupled soliton modelocked chip-based frequency combs separated over distances of 20 m. We show that such a system obeys the universal Kuramoto model for synchronization and that the cavity solitons from the microresonators can be coherently combined which overcomes the fundamental power limit of microresonator-based combs. This study could significantly expand applications of microresonator combs, and with its capability for massive integration, offers a chip-based photonic platform for exploring complex nonlinear systems.

physics.optics↗

arXiv2018

Gas-phase microresonator-based comb spectroscopy without an external pump laser

We present a novel approach to realize microresonator-comb-based high resolution spectroscopy that combines a fiber-laser cavity with a microresonator. Although the spectral resolution of a chip-based comb source is typically limited by the free spectral range (FSR) of the microresonator, we overcome this limit by tuning the 200-GHz repetition-rate comb over one FSR via control of an integrated heater. Our dual-cavity scheme allows for self-starting comb generation without the need for conventional pump-cavity detuning while achieving a spectral resolution equal to the comb linewidth. We measure broadband molecular absorption spectra of acetylene by interleaving 800 spectra taken at 250-MHz per spectral step using a 60-GHz-coarse-resolution spectrometer and exploits advances of integrated heater which can locally and rapidly change the refractive index of a microresonator with low electrical consumption (0.9 GHz/mW), which is orders of magnitude lower than a fiber-based comb. This approach offers a path towards a simple, robust and low-power consumption CMOS-compatible platform capable of remote sensing.

physics.app-ph↗

arXiv2018

A Reconfigurable Nanophotonics Platform for Sub-Millisecond, Deep Brain Neural Stimulation

Nanophotonics provides the ability to rapidly and precisely reconfigure light beams on a compact platform. Infrared nanophotonic devices are widely used in data communications to overcome traditional bandwidth limitations of electrical interconnects. Nanophotonic devices also hold promise for use in biological applications that require visible light, but this has remained technically elusive due to the challenges of reconfiguring and guiding light at these smaller dimensions. In neuroscience, for example, there is a need for implantable optical devices to optogenetically stimulate neurons across deep brain regions with the speed and precision matching state-of-the-art recording probes. Here we demonstrate the first platform for reconfigurable nanophotonic devices in the visible wavelength range and show its application in vivo in the brain. We demonstrate an implantable probe endowed with the ability to rapidly switch and route multiple optical beams using a nanoscale switching network. Each switch consists of a silicon nitride waveguide structure that can be reconfigured by electrically tuning the phase of light and is designed for robustness to fabrication variation, enabling scalable devices. By implanting our probe in mouse visual cortex, we demonstrate in vivo the ability to stimulate identified sets of neurons across layers to produce multi-neuron spike patterns and record them simultaneously with sub-millisecond temporal precision. This nanophotonic platform can be scaled up and integrated with high-density neural recording technologies, opening the door to implantable probe technologies that are able to simultaneously record and stimulate the activity of large neural populations at distant regions of the brain with sub-millisecond precision. We expect this platform will enable researchers to gain a deeper understanding into the spatio-temporal precision of the neural code.

physics.app-ph↗

arXiv2018

Fully integrated ultra-low power Kerr comb generation

Optical frequency combs are broadband sources that offer mutually-coherent, equidistant spectral lines with unprecedented precision in frequency and timing for an array of applications. Kerr frequency combs in microresonators require a single-frequency pump laser and have offered the promise of highly compact, scalable, and power efficient devices. Here, we realize this promise by demonstrating the first fully integrated Kerr frequency comb source through use of extremely low-loss silicon nitride waveguides that form both the microresonator and an integrated laser cavity. Our device generates low-noise soliton-modelocked combs spanning over 100 nm using only 98 mW of electrical pump power. Our design is based on a novel dual-cavity configuration that demonstrates the flexibility afforded by full integration. The realization of a fully integrated Kerr comb source with ultra-low power consumption brings the possibility of highly portable and robust frequency and timing references, sensors, and signal sources. It also enables new tools to investigate the dynamics of comb and soliton generation through close chip-based integration of microresonators and lasers.

physics.optics↗

arXiv2017

Counter-rotating cavity solitons in a silicon nitride microresonator

We demonstrate the generation of counter-rotating cavity solitons in a silicon nitride microresonator using a fixed, single-frequency laser. We demonstrate a dual 3-soliton state with a difference in the repetition rates of the soliton trains that can be tuned by varying the ratio of pump powers in the two directions. Such a system enables a highly compact, tunable dual comb source that can be used for applications such as spectroscopy and distance ranging.

physics.optics↗

arXiv2017

Coherent, directional supercontinuum via cascaded dispersive wave generation

We demonstrate a novel approach to producing coherent, directional supercontinuum via cascaded dispersive wave generation. By pumping in the normal group-velocity dispersion regime, pulse compression of the first dispersive wave results in the generation of a second dispersive wave, resulting in an octave-spanning supercontinuum generated primarily to one side of the pump spectrum. We theoretically investigate the dynamics and show that the generated spectrum is highly coherent. We experimentally confirm this dynamical behavior and the coherence properties in silicon nitride waveguides by performing direct detection of the carrier-envelope-offset frequency of our femtosecond pump source using an f-2f interferometer. Our technique offers a path towards a stabilized, high-power, integrated supercontinuum source with low noise and high coherence, with applications including direct comb spectroscopy.

physics.optics↗

arXiv2017

Low-Loss Silicon Platform for Broadband Mid-Infrared Photonics

Broadband mid-infrared (mid-IR) spectroscopy applications could greatly benefit from today's well-developed, highly scalable silicon photonics technology; however, this platform lacks broadband transparency due to its reliance on absorptive silicon dioxide cladding. Alternative cladding materials have been studied, but the challenge lies in decreasing losses while avoiding complex fabrication techniques. Here, in contrast to traditional assumptions, we show that silicon photonics can achieve low-loss propagation in the mid-IR from 3 - 6 um wavelength, thus providing a highly scalable, well-developed technology in this spectral range. We engineer the waveguide cross section and optical mode interaction with the absorptive cladding oxide to reduce loss at mid-IR wavelengths. We fabricate a microring resonator and measure an intrinsic quality (Q) factor of 10^6 at wavelengths from 3.5 to 3.8 um. This is the highest Q demonstrated on an integrated mid-IR platform to date. With this high-Q silicon microresonator, we also demonstrate a low optical parametric oscillation threshold of 5.2 mW, illustrating the utility of this platform for nonlinear chip-scale applications in the mid-IR.

physics.optics↗

arXiv2016

On-chip dual comb source for spectroscopy

Dual-comb spectroscopy is a powerful technique for real-time, broadband optical sampling of molecular spectra which requires no moving components. Recent developments with microresonator-based platforms have enabled frequency combs at the chip scale. However, the need to precisely match the resonance wavelengths of distinct high-quality-factor microcavities has hindered the development of an on-chip dual comb source. Here, we report the first simultaneous generation of two microresonator combs on the same chip from a single laser. The combs span a broad bandwidth of 51 THz around a wavelength of 1.56 $μ$m. We demonstrate low-noise operation of both frequency combs by deterministically tuning into soliton mode-locked states using integrated microheaters, resulting in narrow ($<$ 10 kHz) microwave beatnotes. We further use one mode-locked comb as a reference to probe the formation dynamics of the other comb, thus introducing a technique to investigate comb evolution without auxiliary lasers or microwave oscillators. We demonstrate broadband high-SNR absorption spectroscopy of dichloromethane spanning 170 nm using the dual comb source over a 20 $μ$s acquisition time. Our device paves the way for compact and robust dual-comb spectrometers at nanosecond timescales.

physics.optics↗

arXiv2016

Dynamics of mode-coupling-induced microresonator frequency combs in normal dispersion

We experimentally and theoretically investigate the dynamics of microresonator-based frequency comb generation assisted by mode coupling in the normal group-velocity dispersion (GVD) regime. We show that mode coupling can initiate intracavity modulation instability (MI) by directly perturbing the pump-resonance mode. We also observe the formation of a low-noise comb as the pump frequency is tuned further into resonance from the MI point. We determine the phase-matching conditions that accurately predict all the essential features of the MI and comb spectra, and extend the existing analogy between mode coupling and high-order dispersion to the normal GVD regime. We discuss the applicability of our analysis to the possibility of broadband comb generation in the normal GVD regime.

physics.optics↗

arXiv2016

Breaking the Loss Limitation of On-chip High-confinement Resonators

On-chip optical resonators have the promise of revolutionizing numerous fields including metrology and sensing; however, their optical losses have always lagged behind their larger discrete resonator counterparts based on crystalline materials and flowable glass. Silicon nitride (Si3N4) ring resonators open up capabilities for optical routing, frequency comb generation, optical clocks and high precision sensing on an integrated platform. However, simultaneously achieving high quality factor and high confinement in Si3N4 (critical for nonlinear processes for example) remains a challenge. Here, we show that addressing surface roughness enables us to overcome the loss limitations and achieve high-confinement, on-chip ring resonators with a quality factor (Q) of 37 million for a ring with 2.5 μm width and 67 million for a ring with 10 μm width. We show a clear systematic path for achieving these high quality factors. Furthermore, we extract the loss limited by the material absorption in our films to be 0.13 dB/m, which corresponds to an absorption limited Q of at least 170 million by comparing two resonators with different degrees of confinement. Our work provides a chip-scale platform for applications such as ultra-low power frequency comb generation, high precision sensing, laser stabilization and sideband resolved optomechanics.

physics.optics↗

arXiv2016

Breather soliton dynamics in microresonators

The generation of temporal cavity solitons in microresonators results in low-noise optical frequency combs which are critical for applications in spectroscopy, astronomy, navigation or telecommunications. Breather solitons also form an important part of many different classes of nonlinear wave systems with a localized temporal structure that exhibits oscillatory behavior. To date, the dynamics of breather solitons in microresonators remains largely unexplored, and its experimental characterization is challenging. Here, we demonstrate the excitation of breather solitons in two different microresonator platforms based on silicon nitride and on silicon. We investigate the dependence of the breathing frequency on pump detuning and observe the transition from period-1 to period-2 oscillation in good agreement with the numerical simulations. Our study presents experimental confirmation of the stability diagram of dissipative cavity solitons predicted by the Lugiato-Lefever equation and is importance to understanding the fundamental dynamical properties of solitons within the larger context of nonlinear science.

physics.optics↗

arXiv2016

Thermally Controlled Comb Generation and Soliton Modelocking in Microresonators

We report the first demonstration of thermally controlled soliton modelocked frequency comb generation in microresonators. By controlling the electric current through heaters integrated with silicon nitride microresonators, we demonstrate a systematic and repeatable pathway to single- and multi-soliton modelocked states without adjusting the pump laser wavelength. Such an approach could greatly simplify the generation of modelocked frequency combs and facilitate applications such as chip-based dual-comb spectroscopy.

physics.optics↗