arXiv subjects

Xinghao Zhu

Publications and source records attributed to Xinghao Zhu.

32 records · Page 2Linked to original sources

arXiv2023

Interactive Planning Using Large Language Models for Partially Observable Robotics Tasks

Designing robotic agents to perform open vocabulary tasks has been the long-standing goal in robotics and AI. Recently, Large Language Models (LLMs) have achieved impressive results in creating robotic agents for performing open vocabulary tasks. However, planning for these tasks in the presence of uncertainties is challenging as it requires \enquote{chain-of-thought} reasoning, aggregating information from the environment, updating state estimates, and generating actions based on the updated state estimates. In this paper, we present an interactive planning technique for partially observable tasks using LLMs. In the proposed method, an LLM is used to collect missing information from the environment using a robot and infer the state of the underlying problem from collected observations while guiding the robot to perform the required actions. We also use a fine-tuned Llama 2 model via self-instruct and compare its performance against a pre-trained LLM like GPT-4. Results are demonstrated on several tasks in simulation as well as real-world environments. A video describing our work along with some results could be found here.

cs.RO↗

arXiv2023

Control of Soft Pneumatic Actuators with Approximated Dynamical Modeling

This paper introduces a full system modeling strategy for a syringe pump and soft pneumatic actuators(SPAs). The soft actuator is conceptualized as a beam structure, utilizing a second-order bending model. The equation of natural frequency is derived from Euler's bending theory, while the damping ratio is estimated by fitting step responses of soft pneumatic actuators. Evaluation of model uncertainty underscores the robustness of our modeling methodology. To validate our approach, we deploy it across four prototypes varying in dimensional parameters. Furthermore, a syringe pump is designed to drive the actuator, and a pressure model is proposed to construct a full system model. By employing this full system model, the Linear-Quadratic Regulator (LQR) controller is implemented to control the soft actuator, achieving high-speed responses and high accuracy in both step response and square wave function response tests. Both the modeling method and the LQR controller are thoroughly evaluated through experiments. Lastly, a gripper, consisting of two actuators with a feedback controller, demonstrates stable grasping of delicate objects with a significantly higher success rate.

cs.RO↗

arXiv2023

Efficient Sim-to-real Transfer of Contact-Rich Manipulation Skills with Online Admittance Residual Learning

Learning contact-rich manipulation skills is essential. Such skills require the robots to interact with the environment with feasible manipulation trajectories and suitable compliance control parameters to enable safe and stable contact. However, learning these skills is challenging due to data inefficiency in the real world and the sim-to-real gap in simulation. In this paper, we introduce a hybrid offline-online framework to learn robust manipulation skills. We employ model-free reinforcement learning for the offline phase to obtain the robot motion and compliance control parameters in simulation \RV{with domain randomization}. Subsequently, in the online phase, we learn the residual of the compliance control parameters to maximize robot performance-related criteria with force sensor measurements in real time. To demonstrate the effectiveness and robustness of our approach, we provide comparative results against existing methods for assembly, pivoting, and screwing tasks.

cs.RO↗

arXiv2023

Diff-Transfer: Model-based Robotic Manipulation Skill Transfer via Differentiable Physics Simulation

The capability to transfer mastered skills to accomplish a range of similar yet novel tasks is crucial for intelligent robots. In this work, we introduce $\textit{Diff-Transfer}$, a novel framework leveraging differentiable physics simulation to efficiently transfer robotic skills. Specifically, $\textit{Diff-Transfer}$ discovers a feasible path within the task space that brings the source task to the target task. At each pair of adjacent points along this task path, which is two sub-tasks, $\textit{Diff-Transfer}$ adapts known actions from one sub-task to tackle the other sub-task successfully. The adaptation is guided by the gradient information from differentiable physics simulations. We propose a novel path-planning method to generate sub-tasks, leveraging $Q$-learning with a task-level state and reward. We implement our framework in simulation experiments and execute four challenging transfer tasks on robotic manipulation, demonstrating the efficacy of $\textit{Diff-Transfer}$ through comprehensive experiments. Supplementary and Videos are on the website https://sites.google.com/view/difftransfer

cs.RO↗

arXiv2023

Human-oriented Representation Learning for Robotic Manipulation

Humans inherently possess generalizable visual representations that empower them to efficiently explore and interact with the environments in manipulation tasks. We advocate that such a representation automatically arises from simultaneously learning about multiple simple perceptual skills that are critical for everyday scenarios (e.g., hand detection, state estimate, etc.) and is better suited for learning robot manipulation policies compared to current state-of-the-art visual representations purely based on self-supervised objectives. We formalize this idea through the lens of human-oriented multi-task fine-tuning on top of pre-trained visual encoders, where each task is a perceptual skill tied to human-environment interactions. We introduce Task Fusion Decoder as a plug-and-play embedding translator that utilizes the underlying relationships among these perceptual skills to guide the representation learning towards encoding meaningful structure for what's important for all perceptual skills, ultimately empowering learning of downstream robotic manipulation tasks. Extensive experiments across a range of robotic tasks and embodiments, in both simulations and real-world environments, show that our Task Fusion Decoder consistently improves the representation of three state-of-the-art visual encoders including R3M, MVP, and EgoVLP, for downstream manipulation policy-learning. Project page: https://sites.google.com/view/human-oriented-robot-learning

cs.RO↗

arXiv2023

A Simple Approach for General Task-Oriented Picking using Placing constraints

Pick-and-place is an important manipulation task in domestic or manufacturing applications. There exist many works focusing on grasp detection with high picking success rate but lacking consideration of downstream manipulation tasks (e.g., placing). Although some research works proposed methods to incorporate task conditions into grasp selection, most of them are data-driven and are therefore hard to adapt to arbitrary operating environments. Observing this challenge, we propose a general task-oriented pick-place framework that treats the target task and operating environment as placing constraints into grasping optimization. Combined with existing grasp detectors, our framework is able to generate feasible grasps for different downstream tasks and adapt to environmental changes without time-consuming re-training processes. Moreover, the framework can accept different definitions of placing constraints, so it is easy to integrate with other modules. Experiments in the simulator and real-world on multiple pick-place tasks are conducted to evaluate the performance of our framework. The result shows that our framework achieves a high and robust task success rate on a wide variety of the pick-place tasks.

cs.RO↗

arXiv2022

Allowing Safe Contact in Robotic Goal-Reaching: Planning and Tracking in Operational and Null Spaces

In recent years, impressive results have been achieved in robotic manipulation. While many efforts focus on generating collision-free reference signals, few allow safe contact between the robot bodies and the environment. However, in human's daily manipulation, contact between arms and obstacles is prevalent and even necessary. This paper investigates the benefit of allowing safe contact during robotic manipulation and advocates generating and tracking compliance reference signals in both operational and null spaces. In addition, to optimize the collision-allowed trajectories, we present a hybrid solver that integrates sampling- and gradient-based approaches. We evaluate the proposed method on a goal-reaching task in five simulated and real-world environments with different collisional conditions. We show that allowing safe contact improves goal-reaching efficiency and provides feasible solutions in highly collisional scenarios where collision-free constraints cannot be enforced. Moreover, we demonstrate that planning in null space, in addition to operational space, improves trajectory safety.

cs.RO↗

arXiv2022

Learn to Grasp with Less Supervision: A Data-Efficient Maximum Likelihood Grasp Sampling Loss

Robotic grasping for a diverse set of objects is essential in many robot manipulation tasks. One promising approach is to learn deep grasping models from large training datasets of object images and grasp labels. However, empirical grasping datasets are typically sparsely labeled (i.e., a small number of successful grasp labels in each image). The data sparsity issue can lead to insufficient supervision and false-negative labels and thus results in poor learning results. This paper proposes a Maximum Likelihood Grasp Sampling Loss (MLGSL) to tackle the data sparsity issue. The proposed method supposes that successful grasps are stochastically sampled from the predicted grasp distribution and maximizes the observing likelihood. MLGSL is utilized for training a fully convolutional network that generates thousands of grasps simultaneously. Training results suggest that models based on MLGSL can learn to grasp with datasets composing of 2 labels per image. Compared to previous works, which require training datasets of 16 labels per image, MLGSL is 8x more data-efficient. Meanwhile, physical robot experiments demonstrate an equivalent performance at a 90.7% grasp success rate on household objects.

cs.RO↗

arXiv2022

Learning to Synthesize Volumetric Meshes from Vision-based Tactile Imprints

Vision-based tactile sensors typically utilize a deformable elastomer and a camera mounted above to provide high-resolution image observations of contacts. Obtaining accurate volumetric meshes for the deformed elastomer can provide direct contact information and benefit robotic grasping and manipulation. This paper focuses on learning to synthesize the volumetric mesh of the elastomer based on the image imprints acquired from vision-based tactile sensors. Synthetic image-mesh pairs and real-world images are gathered from 3D finite element methods (FEM) and physical sensors, respectively. A graph neural network (GNN) is introduced to learn the image-to-mesh mappings with supervised learning. A self-supervised adaptation method and image augmentation techniques are proposed to transfer networks from simulation to reality, from primitive contacts to unseen contacts, and from one sensor to another. Using these learned and adapted networks, our proposed method can accurately reconstruct the deformation of the real-world tactile sensor elastomer in various domains, as indicated by the quantitative and qualitative results.

cs.RO↗

arXiv2022

Offline-Online Learning of Deformation Model for Cable Manipulation with Graph Neural Networks

Manipulating deformable linear objects by robots has a wide range of applications, e.g., manufacturing and medical surgery. To complete such tasks, an accurate dynamics model for predicting the deformation is critical for robust control. In this work, we deal with this challenge by proposing a hybrid offline-online method to learn the dynamics of cables in a robust and data-efficient manner. In the offline phase, we adopt Graph Neural Network (GNN) to learn the deformation dynamics purely from the simulation data. Then a linear residual model is learned in real-time to bridge the sim-to-real gap. The learned model is then utilized as the dynamics constraint of a trust region based Model Predictive Controller (MPC) to calculate the optimal robot movements. The online learning and MPC run in a closed-loop manner to robustly accomplish the task. Finally, comparative results with existing methods are provided to quantitatively show the effectiveness and robustness.

cs.RO↗

arXiv2021

Learning Insertion Primitives with Discrete-Continuous Hybrid Action Space for Robotic Assembly Tasks

This paper introduces a discrete-continuous action space to learn insertion primitives for robotic assembly tasks. Primitive is a sequence of elementary actions with certain exit conditions, such as "pushing down the peg until contact". Since the primitive is an abstraction of robot control commands and encodes human prior knowledge, it reduces the exploration difficulty and yields better learning efficiency. In this paper, we learn robot assembly skills via primitives. Specifically, we formulate insertion primitives as parameterized actions: hybrid actions consisting of discrete primitive types and continuous primitive parameters. Compared with the previous work using a set of discretized parameters for each primitive, the agent in our method can freely choose primitive parameters from a continuous space, which is more flexible and efficient. To learn these insertion primitives, we propose Twin-Smoothed Multi-pass Deep Q-Network (TS-MP-DQN), an advanced version of MP-DQN with twin Q-network to reduce the Q-value over-estimation. Extensive experiments are conducted in the simulation and real world for validation. From experiment results, our approach achieves higher success rates than three baselines: MP-DQN with parameterized actions, primitives with discrete parameters, and continuous velocity control. Furthermore, learned primitives are robust to sim-to-real transfer and can generalize to challenging assembly tasks such as tight round peg-hole and complex shaped electric connectors with promising success rates. Experiment videos are available at https://msc.berkeley.edu/research/insertion-primitives.html.

cs.RO↗

arXiv2021

6-DoF Contrastive Grasp Proposal Network

Proposing grasp poses for novel objects is an essential component for any robot manipulation task. Planning six degrees of freedom (DoF) grasps with a single camera, however, is challenging due to the complex object shape, incomplete object information, and sensor noise. In this paper, we present a 6-DoF contrastive grasp proposal network (CGPN) to infer 6-DoF grasps from a single-view depth image. First, an image encoder is used to extract the feature map from the input depth image, after which 3-DoF grasp regions are proposed from the feature map with a rotated region proposal network. Feature vectors that within the proposed grasp regions are then extracted and refined to 6-DoF grasps. The proposed model is trained offline with synthetic grasp data. To improve the robustness in reality and bridge the simulation-to-real gap, we further introduce a contrastive learning module and variant image processing techniques during the training. CGPN can locate collision-free grasps of an object using a single-view depth image within 0.5 seconds. Experiments on a physical robot further demonstrate the effectiveness of the algorithm.

cs.RO↗

arXiv2021

Contact Pose Identification for Peg-in-Hole Assembly under Uncertainties

Peg-in-hole assembly is a challenging contact-rich manipulation task. There is no general solution to identify the relative position and orientation between the peg and the hole. In this paper, we propose a novel method to classify the contact poses based on a sequence of contact measurements. When the peg contacts the hole with pose uncertainties, a tilt-then-rotate strategy is applied, and the contacts are measured as a group of patterns to encode the contact pose. A convolutional neural network (CNN) is trained to classify the contact poses according to the patterns. In the end, an admittance controller guides the peg towards the error direction and finishes the peg-in-hole assembly. Simulations and experiments are provided to show that the proposed method can be applied to the peg-in-hole assembly of different geometries. We also demonstrate the ability to alleviate the sim-to-real gap.

cs.RO↗

arXiv2019

Optimization Model for Planning Precision Grasps with Multi-Fingered Hands

Precision grasps with multi-fingered hands are important for precise placement and in-hand manipulation tasks. Searching precision grasps on the object represented by point cloud, is challenging due to the complex object shape, high-dimensionality, collision and undesired properties of the sensing and positioning. This paper proposes an optimization model to search for precision grasps with multi-fingered hands. The model takes noisy point cloud of the object as input and optimizes the grasp quality by iteratively searching for the palm pose and finger joints positions. The collision between the hand and the object is approximated and penalized by a series of least-squares. The collision approximation is able to handle the point cloud representation of the objects with complex shapes. The proposed optimization model is able to locate collision-free optimal precision grasps efficiently. The average computation time is 0.50 sec/grasp. The searching is robust to the incompleteness and noise of the point cloud. The effectiveness of the algorithm is demonstrated by experiments.

cs.RO↗