arXiv subjects

Xingqin Lin

Publications and source records attributed to Xingqin Lin.

At least 73 records · Page 4Linked to original sources

arXiv2018

A Telecom Perspective on the Internet of Drones: From LTE-Advanced to 5G

Drones are driving numerous and evolving use cases, and creating transformative socio-economic benefits. Drone operation needs wireless connectivity for communication between drones and ground control systems, among drones, and between drones and air traffic management systems. Mobile networks are well positioned to identify, track, and control the growing fleet of drones. The wide-area, quality, and secure connectivity provided by mobile networks can enhance the efficiency and effectiveness of drone operations beyond visual line-of-sight range. In this article, we elaborate how the drone ecosystem can benefit from mobile technologies, summarize key capabilities required by drone applications, and analyze the service requirements on mobile networks. We present field trial results collected in LTE-Advanced networks to gain insights into the capabilities of the current 4G+ networks for connected drones and share our vision on how 5G networks can further support diversified drone applications.

cs.NI↗

arXiv2018

Interference Mitigation Methods for Unmanned Aerial Vehicles Served by Cellular Networks

A main challenge in providing connectivity to the low altitude unmanned aerial vehicles (UAVs) through existing cellular network arises due to the increased interference in the network. The increased altitude and favourable propagation condition cause UAVs to generate more interference to the neighbouring cells, and at the same time experience more interference from the downlink transmissions of the neighbouring base stations. The uplink interference problem may result in terrestrial UEs having degraded performance, whereas the downlink interference problem may make it challenging for a UAV to maintain connection with the network. In this paper, we propose several uplink and downlink interference mitigation techniques to address these issues. The results indicate that the proposed solutions can reduce the uplink throughput degradation of terrestrial UEs and ensure UAVs to remain in LTE coverage under the worst case scenarios when all the base stations transmit at full power.

cs.IT↗

arXiv2017

Positioning for the Internet of Things: A 3GPP Perspective

Many use cases in the Internet of Things (IoT) will require or benefit from location information, making positioning a vital dimension of the IoT. The 3rd Generation Partnership Project (3GPP) has dedicated a significant effort during its Release 14 to enhance positioning support for its IoT technologies to further improve the 3GPP-based IoT eco-system. In this article, we identify the design challenges of positioning support in Long-Term Evolution Machine Type Communication (LTE-M) and Narrowband IoT (NB-IoT), and overview the 3GPP's work in enhancing the positioning support for LTE-M and NB-IoT. We focus on Observed Time Difference of Arrival (OTDOA), which is a downlink based positioning method. We provide an overview of the OTDOA architecture and protocols, summarize the designs of OTDOA positioning reference signals, and present simulation results to illustrate the positioning performance.

cs.NI↗

arXiv2016

Throughput Optimal Listen-Before-Talk for Cellular in Unlicensed Spectrum

The effort to extend cellular technologies to unlicensed spectrum has been gaining high momentum. Listen-before-talk (LBT) is enforced in the regions such as European Union and Japan to harmonize coexistence of cellular and incumbent systems in unlicensed spectrum. In this paper, we study throughput optimal LBT transmission strategy for load based equipment (LBE). We find that the optimal rule is a pure threshold policy: The LBE should stop listening and transmit once the channel quality exceeds an optimized threshold. We also reveal the optimal set of LBT parameters that are compliant with regulatory requirements. Our results shed light on how the regulatory LBT requirements can affect the transmission strategies of radio equipment in unlicensed spectrum.

cs.IT↗

arXiv2016

A Primer on 3GPP Narrowband Internet of Things (NB-IoT)

Narrowband Internet of Things (NB-IoT) is a new cellular technology introduced in 3GPP Release 13 for providing wide-area coverage for the Internet of Things (IoT). This article provides an overview of the air interface of NB-IoT. We describe how NB-IoT addresses key IoT requirements such as deployment flexibility, low device complexity, long battery life time, support of massive number of devices in a cell, and significant coverage extension beyond existing cellular technologies. We also share the various design rationales during the standardization of NB-IoT in Release 13 and point out several open areas for future evolution of NB-IoT.

cs.NI↗

arXiv2016

Random Access Preamble Design and Detection for 3GPP Narrowband IoT Systems

Narrowband internet of things (NB-IoT) is an emerging cellular technology that will provide improved coverage for massive number of low-throughput low-cost devices with low device power consumption in delay-tolerant applications. A new single tone signal with frequency hopping has been designed for NB-IoT physical random access channel (NPRACH). In this letter we describe this new NPRACH design and explain in detail the design rationale. We further propose possible receiver algorithms for NPRACH detection and time-of-arrival estimation. Simulation results on NPRACH performance including detection rate, false alarm rate, and time-of-arrival estimation accuracy are presented to shed light on the overall potential of NB-IoT systems.

cs.NI↗

arXiv2015

Optimal Relay Probing in Millimeter Wave Cellular Systems with Device-to-Device Relaying

Millimeter-wave (mmWave) cellular systems are power-limited and susceptible to blockages. As a result, mmWave connectivity will be likely to be intermittent. One promising approach to increasing mmWave connectivity and range is to use relays. Device-to-device (D2D) communications open the door to the vast opportunities of D2D and device-to-network relaying for mmWave cellular systems. In this correspondence, we study how to select a good relay for a given source-destination pair in a two-hop mmWave cellular system, where the mmWave links are subject to random Bernoulli blockages. In such a system, probing more relays could potentially lead to the discovery of a better relay but at the cost of more overhead. We find that the throughput-optimal relay probing strategy is a pure threshold policy: the system can stop relay probing once the achievable spectral efficiency of the currently probed two-hop link exceeds some threshold. In general, the spectral efficiency threshold can be obtained by solving a fixed point equation. For the special case with on/off mmWave links, we derive a closed-form solution for the threshold. Numerical results demonstrate that the threshold-based relay probing strategy can yield remarkable throughput gains.

cs.IT↗

arXiv2015

The Interplay between Massive MIMO and Underlaid D2D Networking

In a device-to-device (D2D) underlaid cellular network, the uplink spectrum is reused by the D2D transmissions, causing mutual interference with the ongoing cellular transmissions. Massive MIMO is appealing in such a context as the base station's (BS's) large antenna array can nearly null the D2D-to-BS interference. The multi-user transmission in massive MIMO, however, may lead to increased cellular-to-D2D interference. This paper studies the interplay between massive MIMO and underlaid D2D networking in a multi-cell setting. We investigate cellular and D2D spectral efficiency under both perfect and imperfect channel state information (CSI) at the receivers that employ partial zero-forcing. Compared to the case without D2D, there is a loss in cellular spectral efficiency due to D2D underlay. With perfect CSI, the loss can be completely overcome if the number of canceled D2D interfering signals is scaled with the number of BS antennas at an arbitrarily slow rate. With imperfect CSI, in addition to pilot contamination, a new asymptotic effect termed underlay contamination arises. In the non-asymptotic regime, simple analytical lower bounds are derived for both the cellular and D2D spectral efficiency.

cs.IT↗

arXiv2014

Connectivity of Millimeter Wave Networks with Multi-hop Relaying

This paper presents a novel stochastic geometry approach to the connectivity of milimeter wave (mmWave) networks with multi-hop relaying. The random positions and shapes of obstacles in the radio environment are modeled as a Boolean model, whose germs are distributed according to a Poisson point process and grains are random rectangles. The derived analytical results shed light on how the connectivity of mmWave networks depends on key system parameters such as the density and size of obstacles as well as relaying route window -- the range of distances in which routing relays are selected. We find that multi-hop relaying can greatly improve the connectivity versus single hop mmWave transmission. We show that to obtain near-optimal connectivity the relaying route window should be about the size of the obstacles.

cs.IT↗

arXiv2014

Performance Analysis of Asynchronous Multicarrier Wireless Networks

This paper develops a novel analytical framework for asynchronous wireless networks deploying multicarrier transmission. Nodes in the network have different notions of timing, so from the viewpoint of a typical receiver, the received signals from different transmitters are asynchronous, leading to a loss of orthogonality between subcarriers. We first develop a detailed link-level analysis based on OFDM, based on which we propose a tractable system-level signal-to-interference-plus-noise ratio (SINR) model for asynchronous OFDM networks. The proposed model is used to analytically characterize several important statistics in asynchronous networks with spatially distributed transmitters, including (i) the number of decodable transmitters, (ii) the decoding probability of the nearest transmitter, and (iii) the system throughput. The system-level loss from lack of synchronization is quantified, and to mitigate the loss, we compare and discuss four possible solutions including extended cyclic prefix, advanced receiver timing, dynamic receiver timing positioning, and semi-static receiver timing positioning with multiple timing hypotheses. The model and results are general, and apply to ad hoc networks, cellular systems, and neighbor discovery in device-to-device (D2D) networks.

cs.IT↗

arXiv2014

Spectrum Sharing for Device-to-Device Communication in Cellular Networks

This paper addresses two fundamental and interrelated issues in device-to-device (D2D) enhanced cellular networks. The first issue is how D2D users should access spectrum, and we consider two choices: overlay (orthogonal spectrum between D2D and cellular UEs) and underlay (non-orthogonal). The second issue is how D2D users should choose between communicating directly or via the base station, a choice that depends on distance between the potential D2D transmitter and receiver. We propose a tractable hybrid network model where the positions of mobiles are modeled by random spatial Poisson point process, with which we present a general analytical approach that allows a unified performance evaluation for these questions. Then, we derive analytical rate expressions and apply them to optimize the two D2D spectrum sharing scenarios under a weighted proportional fair utility function. We find that as the proportion of potential D2D mobiles increases, the optimal spectrum partition in the overlay is almost invariant (when D2D mode selection threshold is large) while the optimal spectrum access factor in the underlay decreases. Further, from a coverage perspective, we reveal a tradeoff between the spectrum access factor and the D2D mode selection threshold in the underlay: as more D2D links are allowed (due to a more relaxed mode selection threshold), the network should actually make less spectrum available to them to limit their interference.

cs.IT↗

arXiv2013

Power Control for D2D Underlaid Cellular Networks: Modeling, Algorithms and Analysis

This paper considers a device-to-device (D2D) underlaid cellular network where an uplink cellular user communicates with the base station while multiple direct D2D links share the uplink spectrum. This paper proposes a random network model based on stochastic geometry and develops centralized and distributed power control algorithms. The goal of the proposed power control algorithms is two-fold: ensure the cellular users have sufficient coverage probability by limiting the interference created by underlaid D2D users, while also attempting to support as many D2D links as possible. For the distributed power control method, expressions for the coverage probabilities of cellular and D2D links are derived and a lower bound on the sum rate of the D2D links is provided. The analysis reveals the impact of key system parameters on the network performance. For example, the bottleneck of D2D underlaid cellular networks is the cross-tier interference between D2D links and the cellular user, not the D2D intra-tier interference. Numerical results show the gains of the proposed power control algorithms and accuracy of the analysis.

cs.IT↗

arXiv2013

An Overview on 3GPP Device-to-Device Proximity Services

Device-to-device (D2D) communication will likely be added to LTE in 3GPP Release 12. In principle, exploiting direct communication between nearby mobile devices will improve spectrum utilization, overall throughput, and energy consumption, while enabling new peer-to-peer and location-based applications and services. D2D-enabled LTE devices can also become competitive for fallback public safety networks, that must function when cellular networks are not available, or fail. Introducing D2D poses many challenges and risks to the long-standing cellular architecture, which is centered around the base station. We provide an overview on D2D standardization activities in 3GPP, identify outstanding technical challenges, draw lessons from initial evaluation studies, and summarize "best practices" in the design of a D2D-enabled air interface for LTE-based cellular networks.

cs.NI↗

arXiv2013

Modeling, Analysis and Optimization of Multicast Device-to-Device Transmission

Multicast device-to-device (D2D) transmission is important for applications like local file transfer in commercial networks and is also a required feature in public safety networks. In this paper we propose a tractable baseline multicast D2D model, and use it to analyze important multicast metrics like the coverage probability, mean number of covered receivers and throughput. In addition, we examine how the multicast performance would be affected by certain factors like mobility and network assistance. Take the mean number of covered receivers as an example. We find that simple repetitive transmissions help but the gain quickly diminishes as the repetition time increases. Meanwhile, mobility and network assistance (i.e. allowing the network to relay the multicast signals) can help cover more receivers. We also explore how to optimize multicasting, e.g. by choosing the optimal multicast rate and the optimal number of retransmission times.

cs.IT↗

arXiv2013

An Overview of Load Balancing in HetNets: Old Myths and Open Problems

Matching the demand for resources ("load") with the supply of resources ("capacity") is a basic problem occurring across many fields of engineering, logistics, and economics, and has been considered extensively both in the Internet and in wireless networks. The ongoing evolution of cellular communication networks into dense, organic, and irregular heterogeneous networks ("HetNets") has elevated load-awareness to a central problem, and introduces many new subtleties. This paper explains how several long-standing assumptions about cellular networks need to be rethought in the context of a load-balanced HetNet: we highlight these as three deeply entrenched myths that we then dispel. We survey and compare the primary technical approaches to HetNet load balancing: (centralized) optimization, game theory, Markov decision processes, and the newly popular cell range expansion (a.k.a. "biasing"), and draw design lessons for OFDMA-based cellular systems. We also identify several open areas for future exploration.

cs.IT↗

arXiv2013

Dynamic Spectrum Refarming with Overlay for Legacy Devices

The explosive growth in data traffic is resulting in a spectrum crunch forcing many wireless network operators to look towards refarming their 2G spectrum and deploy more spectrally efficient Long Term Evolution (LTE) technology. However, mobile network operators face a challenge when it comes to spectrum refarming because 2G technologies such as Global System for Mobile (GSM) is still widely used for low bandwidth machine-to-machine (M2M) devices. M2M devices typically have long life cycles, e.g. smart meters, and it is expensive to migrate these devices to newer technology since a truck roll will typically be required to the site where a device is deployed. Furthermore, with cost of 2G modules several times less than that of LTE, even newly deployed M2M devices tend to adopt 2G technology. Nevertheless, operators are keen to either force their 2G M2M customers to migrate so that they can refarm the spectrum or set aside a portion of the 2G spectrum for continuing operating 2G and only refarm the rest for LTE. In this paper we propose a novel solution to provide GSM connectivity within an LTE carrier through an efficient overlay by reserving a few physical resource blocks for GSM. With this approach, operators can refarm their 2G spectrum to LTE efficiently while still providing some GSM connectivity to their low data rate M2M customers. Furthermore, spectrum can be dynamically shared between LTE and GSM. An approach similar to that proposed in this paper can also be applied for other narrow band technology overlays over LTE.

cs.NI↗

arXiv2013

Modeling, Analysis and Design for Carrier Aggregation in Heterogeneous Cellular Networks

Carrier aggregation (CA) and small cells are two distinct features of next-generation cellular networks. Cellular networks with small cells take on a very heterogeneous characteristic, and are often referred to as HetNets. In this paper, we introduce a load-aware model for CA-enabled \textit{multi}-band HetNets. Under this model, the impact of biasing can be more appropriately characterized; for example, it is observed that with large enough biasing, the spectral efficiency of small cells may increase while its counterpart in a fully-loaded model always decreases. Further, our analysis reveals that the peak data rate does not depend on the base station density and transmit powers; this strongly motivates other approaches e.g. CA to increase the peak data rate. Last but not least, different band deployment configurations are studied and compared. We find that with large enough small cell density, spatial reuse with small cells outperforms adding more spectrum for increasing user rate. More generally, universal cochannel deployment typically yields the largest rate; and thus a capacity loss exists in orthogonal deployment. This performance gap can be reduced by appropriately tuning the HetNet coverage distribution (e.g. by optimizing biasing factors).

cs.IT↗

arXiv2013

Dynamic Spectrum Refarming of GSM Spectrum for LTE Small Cells

In this paper we propose a novel solution called dynamic spectrum refarming (DSR) for deploying LTE small cells using the same spectrum as existing GSM networks. The basic idea of DSR is that LTE small cells are deployed in the GSM spectrum but suppress transmission of all signals including the reference signals in some specific physical resource blocks corresponding to a portion of the GSM carriers to ensure full GSM coverage. Our study shows that the proposed solution can provide LTE mobile terminals with high speed data services when they are in the coverage of the LTE small cells while minimally affecting the service provided to GSM terminals located within the LTE small cell coverage area. Thus, the proposal allows the normal operation of the existing GSM networks even with LTE small cells deployed in that spectrum. Though the focus of this paper is about GSM spectrum refarming, an analogous approach can be applied to reuse code division multiple access (CDMA) spectrum for LTE small cells.

cs.IT↗