arXiv subjects

Xingyuan Xu

Publications and source records attributed to Xingyuan Xu.

At least 55 records · Page 3Linked to original sources

arXiv2020

Arbitrary waveform generator for microwave and radio frequencies based on photonics with an integrated 49GHz Kerr micro-comb

We report a photonic-based radio frequency (RF) arbitrary waveform generator (AWG) using a soliton crystal micro-comb source with a free spectral range (FSR) of 48.9 GHz. The comb source provides over 80 wavelengths, or channels, that we use to successfully achieve arbitrary waveform shapes including square waveforms with a tunable duty ratio ranging from 10% to 90%, sawtooth waveforms with a tunable slope ratio of 0.2 to 1, and a symmetric concave quadratic chirp waveform with an instantaneous frequency of sub GHz. We achieve good agreement between theory and experiment, validating the effectiveness of this approach towards realizing high-performance, broad bandwidth, nearly user-defined RF waveform generation.

physics.app-ph↗

arXiv2020

Photonic RF channelizer based on a 90 wavelength optical soliton crystal 49GHz Kerr microcomb

We report a broadband radio frequency (RF) channelizer with up to 92 channels using a coherent microcomb source. A soliton crystal microcomb, generated by a 49 GHz micro-ring resonator (MRR), is used as a multi-wavelength source. Due to its ultra-low comb spacing, up to 92 wavelengths are available in the C band, yielding a broad operation bandwidth. Another high-Q MRR is employed as a passive optical periodic filter to slice the RF spectrum with a high resolution of 121.4 MHz. We experimentally achieve an instantaneous RF operation bandwidth of 8.08 GHz and verify RF channelization up to 17.55 GHz via thermal tuning. Our approach is a significant step towards the monolithically integrated photonic RF receivers with reduced complexity, size, and unprecedented performance, which is important for wide RF applications ranging from broadband analog signal processing to digital-compatible signal detection.

physics.app-ph↗

arXiv2020

Photonic radio frequency and microwave integration based on a multi-wavelength 49GHz Kerr microcomb source

We demonstrate a photonic RF integrator based on an integrated soliton crystal microcomb source. By multicasting and progressively delaying the input RF signal using a transversal structure, the input RF signal is integrated discretely. Up to 81 wavelengths are provided by the microcomb source, which enable a large integration time window of 6.8 ns, together with a time resolution as fast as 84 ps. We perform signal integration of a diverse range of input RF signals including Gaussian pulses with varying time widths, dual pulses with varying time intervals and a square waveform. The experimental results show good agreement with theory. These results verify our microcomb-based integrator as a competitive approach for RF signal integration with high performance and potentially lower cost and footprint.

physics.app-ph↗

arXiv2020

Single photonic perceptron based on a soliton crystal Kerr microcomb for high-speed, scalable, optical neural networks

Optical artificial neural networks (ONNs), analog computing hardware tailored for machine learning, have significant potential for ultra-high computing speed and energy efficiency. We propose a new approach to architectures for ONNs based on integrated Kerr micro-comb sources that is programmable, highly scalable and capable of reaching ultra-high speeds. We experimentally demonstrate the building block of the ONN, a single neuron perceptron, by mapping synapses onto 49 wavelengths of a micro-comb to achieve a high single-unit throughput of 11.9 Giga-FLOPS at 8 bits per FLOP, corresponding to 95.2 Gbps. We test the perceptron on simple standard benchmark datasets, handwritten-digit recognition and cancer-cell detection, achieving over 90% and 85% accuracy, respectively. This performance is a direct result of the record small wavelength spacing (49GHz) for a coherent integrated microcomb source, which results in an unprecedented number of wavelengths for neuromorphic optics. Finally, we propose an approach to scaling the perceptron to a deep learning network using the same single micro-comb device and standard off-the-shelf telecommunications technology, for high-throughput operation involving full matrix multiplication for applications such as real-time massive data processing for unmanned vehicle and aircraft tracking.

physics.optics↗

arXiv2020

Optical data transmission at 44Tb/s and 10 bits/s/Hz over the C-band with standard fibre and a single micro-comb source

Micro-combs [1 - 4], optical frequency combs generated by integrated micro-cavity resonators, offer the full potential of their bulk counterparts [5,6], but in an integrated footprint. The discovery of temporal soliton states (DKS dissipative Kerr solitons) [4,7-11] as a means of modelocking microcombs has enabled breakthroughs in many fields including spectroscopy [12,13], microwave photonics [14], frequency synthesis [15], optical ranging [16,17], quantum sources [18,19], metrology [20,21] and more. One of their most promising applications has been optical fibre communications where they have enabled massively parallel ultrahigh capacity multiplexed data transmission [22,23]. Here, by using a new and powerful class of microcomb called soliton crystals [11], we achieve unprecedented data transmission over standard optical fibre using a single integrated chip source. We demonstrate a line rate of 44.2 Terabits per second using the telecommunications C band at 1550nm with a spectral efficiency, a critically important performance metric, of 10.4 bits/s/Hz. Soliton crystals exhibit robust and stable generation and operation as well as a high intrinsic efficiency that, together with a low soliton microcomb spacing of 48.9 GHz enable the use of a very high coherent data modulation format of 64 QAM (quadrature amplitude modulated). We demonstrate error free transmission over 75 km of standard optical fibre in the laboratory as well as in a field trial over an installed metropolitan optical fibre network. These experiments were greatly aided by the ability of the soliton crystals to operate without stabilization or feedback control. This work demonstrates the capability of optical soliton crystal microcombs to perform in demanding and practical optical communications networks.

physics.app-ph↗

arXiv2020

Comparison of photonic transversal RF spectral filters based on different optical microcombs

Integrated Kerr microcombs are emerging as a powerful tool as sources of multiple wavelength channels for photonic RF and microwave signal processing mainly in the context of transversal filters. They offer a compact device footprint, very high versatility, large numbers of wavelengths, and wide Nyquist bands. Here, we review recent progress on Kerr microcomb-based photonic RF and microwave reconfigurable filters, based both on transversal filter methods and on RF to optical bandwidth scaling. We compare and contrast results achieved with wide comb spacing combs (200GHz) with more finely spaced (49GHz) microcombs. The strong potential of optical micro-combs for RF photonics applications in terms of functions and integrability is also discussed.

physics.app-ph↗

arXiv2020

Enhanced four-wave-mixing with 2D layered graphene oxide films integrated with CMOS compatible micro-ring resonators

Layered 2D graphene oxide (GO) films are integrated with microring resonators (MRRs) to experimentally demonstrate enhanced nonlinear optics in the form of four wave mixing (FWM). Both uniformly coated and patterned GO films are integrated on CMOS compatible doped silica MRRs using a large area, transfer free, layer by layer GO coating method together with photolithography and lift off processes, yielding precise control of the film thickness, placement, and coating length. The high Kerr nonlinearity and low loss of the GO films combined with the strong light matter interaction within the MRRs results in a significant improvement in the FWM efficiency in the hybrid MRRs. Detailed FWM measurements are performed at different pump powers and resonant wavelengths for the uniformly coated MRRs with 1 to 5 layers of GO as well as the patterned devices with 10 to 50 layers of GO. The experimental results show good agreement with theory, achieving up to 7.6 dB enhancement in the FWM conversion efficiency (CE) for an MRR uniformly coated with 1 layer of GO and 10.3 dB for a patterned device with 50 layers of GO. By fitting the measured CE as a function of pump power for devices with different numbers of GO layers, we also extract the dependence of the third-order nonlinearity on layer number and pump power, revealing interesting physical insights about the evolution of the layered GO films from 2D monolayers to quasi bulk like behavior. These results confirm the high nonlinear optical performance of integrated photonic resonators incorporated with 2D layered GO films.

physics.optics↗

arXiv2020

Optical Kerr soliton crystal microcomb source for RF photonic fractional differentiation

We report a photonic radio frequency (RF) fractional differentiator based on an integrated Kerr micro-comb source. The micro-comb source has a free spectral range (FSR) of 49 GHz, generating a large number of comb lines that serve as a high-performance multi-wavelength source for the differentiator. By programming and shaping the comb lines according to calculated tap weights, arbitrary fractional orders ranging from 0.15 to 0.90 are achieved over a broad RF operation bandwidth of 15.49 GHz. We experimentally characterize the frequency-domain RF amplitude and phase responses as well as the temporal responses with a Gaussian pulse input. The experimental results show good agreement with theory, confirming the effectiveness of our approach towards high-performance fractional differentiators featuring broad processing bandwidth, high reconfigurability, and potentially greatly reduced size and cost.

physics.app-ph↗

arXiv2019

Microwave photonic fractional Hilbert transformer with an integrated optical soliton crystal micro-comb

We report a photonic microwave and RF fractional Hilbert transformer based on an integrated Kerr micro-comb source. The micro-comb source has a free spectral range (FSR) of 50GHz, generating a large number of comb lines that serve as a high-performance multi-wavelength source for the transformer. By programming and shaping the comb lines according to calculated tap weights, we achieve both arbitrary fractional orders and a broad operation bandwidth. We experimentally characterize the RF amplitude and phase response for different fractional orders and perform system demonstrations of real-time fractional Hilbert transforms. We achieve a phase ripple of < 0.15 rad within the 3-dB pass-band, with bandwidths ranging from 5 to 9 octaves, depending on the order. The experimental results show good agreement with theory, confirming the effectiveness of our approach as a new way to implement high-performance fractional Hilbert transformers with broad processing bandwidth, high reconfigurability, and greatly reduced size and complexity.

physics.app-ph↗

arXiv2019

Microwave and RF signal processing based on integrated soliton crystal optical microcombs

Microcombs are powerful tools as sources of multiple wavelength channels for photonic RF signal processing. They offer a compact device footprint, large numbers of wavelengths, and wide Nyquist bands. Here, we review recent progress on microcomb-based photonic RF signal processors, including true time delays, reconfigurable filters, Hilbert transformers, differentiators, and channelizers. The strong potential of optical micro-combs for RF photonics applications in terms of functions and integrability is also discussed.

eess.SP↗

arXiv2019

Microwave Q-band oscillator at 49GHz for broadband frequency conversion based on a Kerr optical soliton crystal micro-comb

We report a broadband microwave frequency converter based on a coherent Kerr optical micro-comb generated by an integrated micro-ring resonator. The coherent micro-comb displays features that are consistent with soliton crystal dynamics with an FSR of 48.9GHz. We use this to demonstrate a high-performance millimeter-wave local oscillator at 48.9GHz in the Q-band for microwave frequency conversion. We experimentally verify the microwave performance up to 40 GHz, achieving a ratio of 6.8 dB between output RF power and IF power and a spurious suppression ratio of > 43.5 dB. The experimental results show good agreement with theory and verify the effectiveness of microwave frequency converters based on coherent optical micro-combs, with the ability to achieve reduced size, complexity, and potential cost.

physics.app-ph↗

arXiv2019

Integrated polarizers based on graphene oxide in waveguides and ring resonators

Integrated waveguide polarizers and polarization-selective micro-ring resonators (MRRs) incorporated with graphene oxide (GO) films are experimentally demonstrated. CMOS-compatible doped silica waveguides and MRRs with both uniformly coated and patterned GO films are fabricated based on a large-area, transfer-free, layer-by-layer GO coating method that yields precise control of the film thickness. Photolithography and lift-off processes are used to achieve photolithographic patterning of GO films with precise control of the placement and coating length. Detailed measurements are performed to characterize the performance of the devices versus GO film thickness and coating length as a function of polarization, wavelength and power. A high polarization dependent loss of ~53.8 dB is achieved for the waveguide coated with 2-mm-long patterned GO films. It is found that intrinsic film material loss anisotropy dominates the performance for less than 20 layers whereas polarization dependent mode overlap dominates for thicker layers. For the MRRs, the GO coating length is reduced to 50 microns, yielding a ~ 8.3-dB polarization extinction ratio between TE and TM resonances. These results offer interesting physical insights and trends of the layered GO films and demonstrate the effectiveness of introducing GO films into photonic integrated devices to realize high-performance polarization selective components.

physics.optics↗

arXiv2018

Graphene oxide for enhanced nonlinear optics in low and high index contrast waveguides and nanowires

We demonstrate enhanced four-wave mixing (FWM) in doped silica waveguides integrated with graphene oxide (GO) layers. Owing to strong mode overlap between the integrated waveguides and GO films that have a high Kerr nonlinearity and low loss, the FWM efficiency of the hybrid integrated waveguides is significantly improved. We perform FWM measurements for different pump powers, wavelength detuning, GO coating lengths, and number of GO layers. Our experimental results show good agreement with theory, achieving up to ~9.5-dB enhancement in the FWM conversion efficiency for a 1.5-cm-long waveguide integrated with 2 layers of GO. We show theoretically that for different waveguide geometries an enhancement in FWM efficiency of ~ 20 dB can be obtained in the doped silica waveguides, and more than 30 dB in silicon nanowires and slot waveguides. This demonstrates the effectiveness of introducing GO films into integrated photonic devices in order to enhance the performance of nonlinear optical processes.

physics.optics↗

arXiv2018

Tunable RF and microwave photonic sideband generator based on cascaded 49GHz and 200GHz integrated ring resonators

We demonstrate a continuously RF tunable orthogonally polarized optical single sideband (OP-OSSB) generator based on dual cascaded micro-ring resonators. By splitting the input double sideband signal into an orthogonally polarized carrier and lower sideband via TE- and TM-polarized MRRs, an OP-OSSB signal is generated. A large tuning range of the optical carrier to sideband ratio of up to 57.3 dB is achieved by adjusting the polarization angle of the input light. The operation RF frequency of the OP-OSSB generator can be continuously tuned with a 21.4 GHz range via independent thermal control of the two MRRs. Our device represents a competitive approach towards OP-OSSB generation with wideband tunable RF operation, and is promising for photonic RF signal transmission and processing in radar and communication systems.

physics.app-ph↗

arXiv2018

Emerging applications of integrated optical microcombs for analogue RF and microwave photonic signal processing

We review new applications of integrated microcombs in RF and microwave photonic systems. We demonstrate a wide range of powerful functions including a photonic intensity high order and fractional differentiators, optical true time delays, advanced filters, RF channelizer and other functions, based on a Kerr optical comb generated by a compact integrated microring resonator, or microcomb. The microcomb is CMOS compatible and contains a large number of comb lines, which can serve as a high performance multiwavelength source for the transversal filter, thus greatly reduce the cost, size, and complexity of the system. The operation principle of these functions is theoretically analyzed, and experimental demonstrations are presented.

physics.app-ph↗

arXiv2018

Photonic single sideband RF generator based on an integrated optical micro-ring resonator

We demonstrate narrowband orthogonally polarized optical RF single sideband generation as well as dual-channel equalization based on an integrated dual-polarization-mode high-Q microring resonator. The device operates in the optical communications band and enables narrowband RF operation at either 16.6 GHz or 32.2 GHz, determined by the free spectral range and TE/TM mode interval in the resonator. We achieve a very large dynamic tuning range of over 55 dB for both the optical carrier-to-sideband ratio and the dual-channel RF equalization.

eess.SP↗

arXiv2018

Silicon photonic filters based on cascaded Sagnac loop resonators

We demonstrate advanced integrated photonic filters in silicon-on-insulator (SOI) nanowires implemented by cascaded Sagnac loop reflector (CSLR) resonators. We investigate mode splitting in these standing-wave (SW) resonators and demonstrate its use for engineering the spectral profile of on-chip photonic filters. By changing the reflectivity of the Sagnac loop reflectors (SLRs) and the phase shifts along the connecting waveguides, we tailor mode splitting in the CSLR resonators to achieve a wide range of filter shapes for diverse applications including enhanced light trapping, flat-top filtering, Q factor enhancement, and signal reshaping. We present the theoretical designs and compare the CSLR resonators with three, four, and eight SLRs fabricated in SOI. We achieve versatile filter shapes in the measured transmission spectra via diverse mode splitting that agree well with theory. This work confirms the effectiveness of using CSLR resonators as integrated multi-functional SW filters for flexible spectral engineering.

physics.app-ph↗

arXiv2018

A Radio Frequency Channelizer based on Cascaded Integrated Micro-ring Resonator Optical Comb Sources and Filters

We report a broadband RF channelizer based on an integrated optical frequency Kerr micro-comb source, with an RF channelizing bandwidth of 90 GHz, a high RF spectral slice resolution of 1.04 GHz, and experimentally verify the RF performance up to 19 GHz. This approach to realizing RF channelizers offers reduced complexity, size, and potential cost for a wide range of applications to microwave signal detection.

physics.app-ph↗