arXiv subjects

Xinyue Zhu

Publications and source records attributed to Xinyue Zhu.

12 recordsLinked to original sources

arXiv2026

Topological phase transition driven by in-plane spin rotation

The intrinsic coupling between magnetism and nontrivial band topology in magnetic topological insulators makes external magnetic fields a powerful tool for manipulating topological states. However, conventional magnetic control mechanisms, such as driving magnetic phase transitions or fully reversing magnetization, typically demand large magnetic fields and lack continuous tunability. Here, we establish a symmetry framework for the reversible switching of topological states via continuous in-plane spin rotation, governed by magnetic point group constraints on the Berry curvature distribution. Using a two-dimensional kagome ferromagnetic Chern insulator as a prototype, we demonstrate that a 60°in-plane magnetization rotation reverses the sign of the Chern number, transitioning through a topologically trivial state. Crucially, micromagnetic simulations confirm that this spin-reorientation-driven switching operates under exceptionally small magnetic fields and on ultrafast timescales. This work provides a highly efficient, low-energy paradigm for the manipulation of topological states.

cond-mat.mtrl-sci↗

arXiv2026

ReactEMG Stroke: Healthy-to-Stroke Few-shot Adaptation for sEMG-Based Intent Detection

Surface electromyography (sEMG) is a promising control signal for assist-as-needed hand rehabilitation after stroke, but detecting intent from paretic muscles often requires lengthy, subject-specific calibration and remains brittle to variability. We propose a healthy-to-stroke adaptation pipeline that initializes an intent detector from a model pretrained on large-scale able-bodied sEMG, then fine-tunes it for each stroke participant using only a small amount of subject-specific data. Using a newly collected dataset from three individuals with chronic stroke, we compare adaptation strategies (head-only tuning, parameter-efficient LoRA adapters, and full end-to-end fine-tuning) and evaluate on held-out test sets that include realistic distribution shifts such as within-session drift, posture changes, and armband repositioning. Across conditions, healthy-pretrained adaptation consistently improves stroke intent detection relative to both zero-shot transfer and stroke-only training under the same data budget; the best adaptation methods improve average transition accuracy from 0.42 to 0.61 and raw accuracy from 0.69 to 0.78. These results suggest that transferring a reusable healthy-domain EMG representation can reduce calibration burden while improving robustness for real-time post-stroke intent detection. Our project website, video, code, and dataset are available at: https://roamlab.github.io/reactemg-stroke/.

cs.RO↗

arXiv2026

On the Scaling of PEFT: Towards Million Personal Models of Trillion Parameters

Parameter-efficient fine-tuning (PEFT) is usually treated as a cheaper alternative to full fine-tuning. We study a broader role: small trainable adapters as persistent local state on top of strong shared foundation models. In this framing, the base model provides shared competence while adapters carry instance-specific behavior such as preferences, skills, tool habits, and memory-like updates. We organize the problem around three scaling axes: Scale Up, where stronger shared priors make small local updates more useful; Scale Down, where we study how small adapters can be while remaining reliable; and Scale Out, where many persistent adapted instances coexist. MinT provides one infrastructure example for managing adapter identity, revision, provenance, evaluation, and serving residency. Together, the results suggest that PEFT can be a compact substrate for persistent personal models rather than only a budget substitute for full fine-tuning.

cs.LG↗

arXiv2026

MinT: Managed Infrastructure for Training and Serving Millions of LLMs

We present MindLab Toolkit (MinT), a managed infrastructure system for Low-Rank Adaptation (LoRA) post-training and online serving. MinT targets a setting where many trained policies are produced over a small number of expensive base-model deployments. Instead of materializing each policy as a merged full checkpoint, MinT keeps the base model resident and moves exported LoRA adapter revisions through rollout, update, export, evaluation, serving, and rollback, hiding distributed training, serving, scheduling, and data movement behind a service interface. MinT scales this path along three axes. Scale Up extends LoRA RL to frontier-scale dense and MoE architectures, including MLA and DSA attention paths, with training and serving validated beyond 1T total parameters. Scale Down moves only the exported LoRA adapter, which can be under 1% of base-model size in rank-1 settings; adapter-only handoff reduces the measured step by 18.3x on a 4B dense model and 2.85x on a 30B MoE, while concurrent multi-policy GRPO shortens wall time by 1.77x and 1.45x without raising peak memory. Scale Out separates durable policy addressability from CPU/GPU working sets: a tensor-parallel deployment supports 10^6-scale addressable catalogs (measured single-engine sweeps through 100K) and thousand-adapter active waves at cluster scale, with cold loading treated as scheduled service work and packed MoE LoRA tensors improving live engine loading by 8.5-8.7x. MinT thus manages million-scale LoRA policy catalogs while training and serving selected adapter revisions over shared 1T-class base models.

cs.LG↗

arXiv2025

Tactile-based Object Retrieval From Granular Media

We introduce GEOTACT, the first robotic system capable of grasping and retrieving objects of potentially unknown shapes buried in a granular environment. While important in many applications, ranging from mining and exploration to search and rescue, this type of interaction with granular media is difficult due to the uncertainty stemming from visual occlusion and noisy contact signals. To address these challenges, we use a learning method relying exclusively on touch feedback, trained end-to-end with simulated sensor noise. We show that our problem formulation leads to the natural emergence of learned pushing behaviors that the manipulator uses to reduce uncertainty and funnel the object to a stable grasp despite spurious and noisy tactile readings. We introduce a training curriculum that bootstraps learning in simulated granular environments, enabling zero-shot transfer to real hardware. Despite being trained only on seven objects with primitive shapes, our method is shown to successfully retrieve 35 different objects, including rigid, deformable, and articulated objects with complex shapes. Videos and additional information can be found at https://jxu.ai/geotact.

cs.RO↗

arXiv2025

ReactEMG: Stable, Low-Latency Intent Detection from sEMG via Masked Modeling

Surface electromyography (sEMG) signals show promise for effective human-machine interfaces, particularly in rehabilitation and prosthetics. However, challenges remain in developing systems that respond quickly to user intent, produce stable flicker-free output suitable for device control, and work across different subjects without time-consuming calibration. In this work, we propose a framework for EMG-based intent detection that addresses these challenges. We cast intent detection as per-timestep segmentation of continuous sEMG streams, assigning labels as gestures unfold in real time. We introduce a masked modeling training strategy that aligns muscle activations with their corresponding user intents, enabling rapid onset detection and stable tracking of ongoing gestures. In evaluations against baseline methods, using metrics that capture accuracy, latency and stability for device control, our approach achieves state-of-the-art performance in zero-shot conditions. These results demonstrate its potential for wearable robotics and next-generation prosthetic systems. Our project website, video, code, and dataset are available at: https://reactemg.github.io/

cs.RO↗

arXiv2025

Touch in the Wild: Learning Fine-Grained Manipulation with a Portable Visuo-Tactile Gripper

Handheld grippers are increasingly used to collect human demonstrations due to their ease of deployment and versatility. However, most existing designs lack tactile sensing, despite the critical role of tactile feedback in precise manipulation. We present a portable, lightweight gripper with integrated tactile sensors that enables synchronized collection of visual and tactile data in diverse, real-world, and in-the-wild settings. Building on this hardware, we propose a cross-modal representation learning framework that integrates visual and tactile signals while preserving their distinct characteristics. The learning procedure allows the emergence of interpretable representations that consistently focus on contacting regions relevant for physical interactions. When used for downstream manipulation tasks, these representations enable more efficient and effective policy learning, supporting precise robotic manipulation based on multimodal feedback. We validate our approach on fine-grained tasks such as test tube insertion and pipette-based fluid transfer, demonstrating improved accuracy and robustness under external disturbances. Our project page is available at https://binghao-huang.github.io/touch_in_the_wild/ .

cs.RO↗

arXiv2025

Knolling Bot: Teaching Robots the Human Notion of Tidiness

For robots to truly collaborate and assist humans, they must understand not only logic and instructions, but also the subtle emotions, aesthetics, and feelings that define our humanity. Human art and aesthetics are among the most elusive concepts-often difficult even for people to articulate-and without grasping these fundamentals, robots will be unable to help in many spheres of daily life. Consider the long-promised robotic butler: automating domestic chores demands more than motion planning. It requires an internal model of cleanliness and tidiness-a challenge largely unexplored by AI. To bridge this gap, we propose an approach that equips domestic robots to perform simple tidying tasks via knolling, the practice of arranging scattered items into neat, space-efficient layouts. Unlike the uniformity of industrial settings, household environments feature diverse objects and highly subjective notions of tidiness. Drawing inspiration from NLP, we treat knolling as a sequential prediction problem and employ a transformer based model to forecast each object's placement. Our method learns a generalizable concept of tidiness, generates diverse solutions adaptable to varying object sets, and incorporates human preferences for personalized arrangements. This work represents a step forward in building robots that internalize human aesthetic sense and can genuinely co-create in our living spaces.

cs.RO↗

arXiv2025

ChatEMG: Synthetic Data Generation to Control a Robotic Hand Orthosis for Stroke

Intent inferral on a hand orthosis for stroke patients is challenging due to the difficulty of data collection. Additionally, EMG signals exhibit significant variations across different conditions, sessions, and subjects, making it hard for classifiers to generalize. Traditional approaches require a large labeled dataset from the new condition, session, or subject to train intent classifiers; however, this data collection process is burdensome and time-consuming. In this paper, we propose ChatEMG, an autoregressive generative model that can generate synthetic EMG signals conditioned on prompts (i.e., a given sequence of EMG signals). ChatEMG enables us to collect only a small dataset from the new condition, session, or subject and expand it with synthetic samples conditioned on prompts from this new context. ChatEMG leverages a vast repository of previous data via generative training while still remaining context-specific via prompting. Our experiments show that these synthetic samples are classifier-agnostic and can improve intent inferral accuracy for different types of classifiers. We demonstrate that our complete approach can be integrated into a single patient session, including the use of the classifier for functional orthosis-assisted tasks. To the best of our knowledge, this is the first time an intent classifier trained partially on synthetic data has been deployed for functional control of an orthosis by a stroke survivor. Videos, source code, and additional information can be found at https://jxu.ai/chatemg.

cs.RO↗

arXiv2024

GRID: Scene-Graph-based Instruction-driven Robotic Task Planning

Recent works have shown that Large Language Models (LLMs) can facilitate the grounding of instructions for robotic task planning. Despite this progress, most existing works have primarily focused on utilizing raw images to aid LLMs in understanding environmental information. However, this approach not only limits the scope of observation but also typically necessitates extensive multimodal data collection and large-scale models. In this paper, we propose a novel approach called Graph-based Robotic Instruction Decomposer (GRID), which leverages scene graphs instead of images to perceive global scene information and iteratively plan subtasks for a given instruction. Our method encodes object attributes and relationships in graphs through an LLM and Graph Attention Networks, integrating instruction features to predict subtasks consisting of pre-defined robot actions and target objects in the scene graph. This strategy enables robots to acquire semantic knowledge widely observed in the environment from the scene graph. To train and evaluate GRID, we establish a dataset construction pipeline to generate synthetic datasets for graph-based robotic task planning. Experiments have shown that our method outperforms GPT-4 by over 25.4% in subtask accuracy and 43.6% in task accuracy. Moreover, our method achieves a real-time speed of 0.11s per inference. Experiments conducted on datasets of unseen scenes and scenes with varying numbers of objects demonstrate that the task accuracy of GRID declined by at most 3.8%, showcasing its robust cross-scene generalization ability. We validate our method in both physical simulation and the real world. More details can be found on the project page https://jackyzengl.github.io/GRID.github.io/.

cs.RO↗

arXiv2023

Delivery of nanosecond laser pulses by multimode anti-resonant hollow core fiber at 1 um wavelength

In this paper we explore the application of low-loss multimode anti-resonant hollow-core fiber (MM-AR-HCF) in the delivery of nanosecond laser pulses at 1 um wavelength. MM-AR-HCF of large core offers a rich content of low-loss higher-order modes which plays a key role in the efficient coupling and transmission of high-power laser of degraded beam quality. In the experiment, laser pulses of an average pulse energy of 21.8 mJ with 14.6 ns pulse width (corresponding a peak power of 1.49 MW) are transmitted through MM-AR-HCF of 9.8 m length without damaging. Up to 94 % coupling efficiency is achieved where the incident laser beam suffers a degraded beam quality with and of 2.18 and 1.99 respectively. Laser-induced damage threshold (LIDT) of MM-AR-HCF measures 22.6 mJ for 94 % coupling efficiency, which is 7 times higher than that for multimode silica optical fiber with a core diameter of 200 um.

physics.optics↗

arXiv2017

Data Augmentation in Emotion Classification Using Generative Adversarial Networks

It is a difficult task to classify images with multiple class labels using only a small number of labeled examples, especially when the label (class) distribution is imbalanced. Emotion classification is such an example of imbalanced label distribution, because some classes of emotions like \emph{disgusted} are relatively rare comparing to other labels like {\it happy or sad}. In this paper, we propose a data augmentation method using generative adversarial networks (GAN). It can complement and complete the data manifold and find better margins between neighboring classes. Specifically, we design a framework with a CNN model as the classifier and a cycle-consistent adversarial networks (CycleGAN) as the generator. In order to avoid gradient vanishing problem, we employ the least-squared loss as adversarial loss. We also propose several evaluation methods on three benchmark datasets to validate GAN's performance. Empirical results show that we can obtain 5%~10% increase in the classification accuracy after employing the GAN-based data augmentation techniques.

cs.CV↗