arXiv subjects

Xinzhi Zheng

Publications and source records attributed to Xinzhi Zheng.

7 recordsLinked to original sources

arXiv2026

Dual-comb generated in single thin-film lithium niobate microrings

Dual-comb technology has emerged as an essential tool for high-precision spectroscopy, real-time ranging, and high-sensitivity sensing. Integrating dual-comb sources into a single microresonator would substantially reduce pump power, footprint, system complexity, and cost, yet this remains a significant challenge. Here, we demonstrate, for the first time, integrated dual-comb generation in a single thin-film lithium niobate (TFLN) microring, under single continuous-wave laser pumping. Rather than regarding TFLN's strong Raman nonlinearity as detrimental, as conventionally viewed, we harness it constructively. By engineering the dispersion of TFLN microrings, we leverage the fundamental and first-order transverse-electric mode families with loaded Q factors exceeding 5X10^6, comparable repetition rates, and suitable dispersion profiles, and bridge them through stimulated Raman scattering (SRS) processes. Pumping a first-order mode at 1551.28 nm initially excites both Stokes and anti-Stokes SRS in the fundamental mode family at low thresholds, and subsequently produces two independent, spectrally separated combs at a pump power of 320 mW via direct Kerr and Raman-assisted Kerr effects, respectively. The two combs span broad bandwidths, exhibit repetition rates of ~102 GHz with a slight difference of ~624 MHz, and do not merge spectrally. The broadest spectrum spans 654 nm, and the Raman-Kerr comb has a 3-dB bandwidth exceeding 29 nm. Further characterization confirms that the comb lines exhibit low phase noise, with an intrinsic linewidth of 410 Hz. This work establishes a robust pathway for on-chip dual-comb generation in a single-laser pumped microring, significantly advancing dual-comb systems toward simplified architectures, enhanced robustness, and scalable integration, while accelerating their practical deployment.

physics.optics↗

arXiv2026

Monolithic tantalum pentoxide microrings with intrinsic Q factors exceeding 4X10(6)

Tantalum pentoxide (Ta2O5), as a silicon-photonic-compatible material platform, has garnered significant attention for high-performance integrated photonics due to its exceptional properties: a broad transparency window spanning from 0.28 um to 8 um, a moderate refractive index of 2.05 at 1550 nm, and an impressive nonlinear refractive index of 7.2X10^(-19) m^2/W. Despite these advantages, achieving low-loss fabrication of monolithic microrings on the Ta2O5 platform remains challenging due to its inherent hardness and brittleness, which often result in rough sidewalls and significant scattering losses. In this work, we successfully demonstrated monolithic Ta2O5 microring resonators with exceptionally high intrinsic and loaded quality (Q) factors. This was accomplished through the innovative application of photolithography-assisted chemo-mechanical etching (PLACE) technology. By optimizing the coupling region between the microring and the bus waveguide, as well as meticulously controlling surface roughness during fabrication, we achieved near-critical coupling in the resulting microrings. The devices exhibited loaded Q factors of 2.74X10(6) in the telecom band without employing expensive electron-beam lithography, showing an intrinsic Q factor as high as 4.47X10(6) and a low propagation loss of only 0.0732 dB/cm - representing the highest results reported for strongly confined Ta2O5-based microring resonators to date. This work paves the way for the development of advanced photonic devices on the Ta2O5 platform with low manufacturing cost, including low-threshold microlasers, highly sensitive sensors, broad bandwidth supercontinuum sources, and optical frequency combs.

physics.optics↗

arXiv2025

Simultaneous generation of Raman-assisted Soliton Microcombs and Tunable Multi-chromatic Raman Microlasers in Single Monolithic Thin-film Lithium Niobate Microrings

High-performance integrated broadband coherent light sources are essential for advanced applications in high-bandwidth data processing and chip-scale metrology, yet remain challenging. In this study, we demonstrate a monolithic Z-cut lithium niobate on insulator (LNOI) microring platform that enables simultaneous generation of tunable multi-chromatic microlasers and Raman-assisted soliton microcombs. Exploiting the strong Raman activity and high second-order nonlinearity of LNOI, we engineered a dispersion-optimized microring with a loaded Q factor of 3.86X10^6, facilitating on-chip efficient broadband coherent light source. A novel phase-matching configuration with all the waves of the same ordinary polarization was realized for the first time in this platform, feasibly enabling modal-phase matched Raman-quadratic nonlinear processes that extend lasing signals into the visible spectrum. Under continuous-wave laser pumping at 3.73 mW in the telecom band, we achieved a Raman-assisted soliton comb centered at 1624.49 nm with record-low pump threshold on the LNOI platform. Concurrently, multi-chromatic Raman lasing outputs were observed at ~1700, ~813, and ~535 nm within the same microring. The system exhibited efficient wavelength tuning of these multi-chromatic laser signals through a 5 nm shift in pump wavelength. This work represents a significant advance in integrated photonics for versatile optical signal generation.

physics.optics↗

arXiv2025

2.7-octave supercontinuum generation spanning from ultraviolet to near-infrared in thin-film lithium niobate waveguides

Supercontinuum generation (SCG) with spectral coverage across the full visible and ultraviolet (UV) ranges is crucial for optical clocks, quantum computing and sensing. However, achieving such SCG in nanophotonic platforms is challenging due to the difficulties in spectrum broadening. Here, Such ultrabroad-bandwidth SCG was demonstrated in thin-film lithium niobate (TFLN) nanophotonic waveguides by dispersion management, without periodic poling for spectral broadening. Anomalous-dispersion waveguides were designed in the telecom band, simultaneously enabling dispersive wave emergence, modal-matched second harmonic generation, and third harmonic generation for spectrum broadening. Moreover, MgO was intentionally doped to mitigate the photorefractive effect of lithium niobate, which frequently results in un-sustained spectrum broadening and in turn limits the accessible SCG coverage. By leveraging photolithography assisted chemo-mechanical etching, low-loss MgO doped TFLN nanophotonic waveguides were fabricated. As a result, thanks to the utilization of the strong second-order and third-order nonlinear processes, gap-free 2.7-octave SCG spanning from 330 nm to 2250 nm was observed by pumping the waveguide with a 1550-nm femtosecond pulsed laser with 0.687 nJ, agreeing well with numerical simulation. This spectral coverage represents the state of the art in TFLN platforms without fine microdomains, and even close to the record in sophisticated chirped periodically poled TFLN waveguides.

physics.optics↗

arXiv2025

Low-loss thin-film periodically poled lithium niobate waveguides fabricated by femtosecond laser photolithography

Periodically poled lithium niobate on insulator (PPLNOI) ridge waveguides are critical photonic components for both classical and quantum information processing. However, dry etching of PPLNOI waveguides often generates rough sidewalls and variations in the etching rates of oppositely poled lithium niobate ferroelectric domains, leading a relatively high propagation losses (0.25 - 1 dB/cm), which significantly limits net conversion efficiency and hinders scalable photonic integration. In this work, a low-loss PPLNOI ridge waveguide with a length of 7 mm was fabricated using ultra-smooth sidewalls through photolithography-assisted chemo-mechanical etching (PLACE) followed by high-voltage pulse poling with low cost. The average surface roughness was measured at just 0.27 nm, resulting in record-low propagation loss of 0.106 dB/cm in PPLNOI waveguides. Highly efficient second-harmonic generation was demonstrated with a normalized efficiency of 1643%/(W*cm^2) without temperature tuning, corresponding to a conversion efficiency of 805%/W, which is closed to the best conversion efficiency (i.e., 814%/W) reported in nanophotonic PPLNOI waveguide fabricated by expensive electron-beam lithography followed by dry etching. The absolute conversion efficiency reached 15.8% at a pump level of 21.6 mW. And the normalized efficiency can be even improved to 1742%/(W*cm^2) at optimal temperature of 59°C.

physics.optics↗

arXiv2024

Second harmonic generation with 48% conversion efficiency from cavity polygon modes in a monocrystalline lithium niobate microdisk resonator

Thin-film lithium niobate (TFLN) based optical microresonators offer large nonlinear coefficient d_33 and high light-wave confinement, allowing highly efficient second-order optical nonlinear frequency conversion. Here, we achieved ultra-efficiency second harmonic generation (SHG) from high-Q polygon modes by maximizing the utilization of the highest nonlinear coefficient d_33 in a monocrystalline X-cut TFLN microdisk resonator for the first time. The polygon modes are designed and formed with two parallel sides perpendicular to the optical axis of the lithium niobate crystal by introducing weak perturbations into the microdisk of a tapered fiber, which maximizes the utilization of d_33. The polygon modes exhibit ultrahigh intrinsic Q factors of ~3.86X10(7), due to the fact that polygon modes are located far from the relatively rough sidewall of the microdisk. Moreover, the pump and second harmonic polygon modes share high modal overlap factor of ~80%. Consequently, SHG from cavity polygon modes with absolute conversion efficiency as high as 48.08% was realized at an on-chip pump level of only 4.599 mW without fine domain structures, surpassing the best results (23% and 30%) reported in other two domain-inversion-free phase matching schemes and even approaching the record (52%) in PPLN microresonators.

physics.optics↗

arXiv2023

Item Cold Start Recommendation via Adversarial Variational Auto-encoder Warm-up

The gap between the randomly initialized item ID embedding and the well-trained warm item ID embedding makes the cold items hard to suit the recommendation system, which is trained on the data of historical warm items. To alleviate the performance decline of new items recommendation, the distribution of the new item ID embedding should be close to that of the historical warm items. To achieve this goal, we propose an Adversarial Variational Auto-encoder Warm-up model (AVAEW) to generate warm-up item ID embedding for cold items. Specifically, we develop a conditional variational auto-encoder model to leverage the side information of items for generating the warm-up item ID embedding. Particularly, we introduce an adversarial module to enforce the alignment between warm-up item ID embedding distribution and historical item ID embedding distribution. We demonstrate the effectiveness and compatibility of the proposed method by extensive offline experiments on public datasets and online A/B tests on a real-world large-scale news recommendation platform.

cs.IR↗