arXiv subjects

Xiucheng Wang

Publications and source records attributed to Xiucheng Wang.

At least 37 records · Page 2Linked to original sources

arXiv2026

RadioDiff-FS: Physics-Informed Manifold Alignment in Few-Shot Diffusion Models for High-Fidelity Radio Map Construction

Radio maps (RMs) provide spatially continuous propagation characterizations essential for 6G network planning, but high-fidelity RM construction remains challenging. Rigorous electromagnetic solvers incur prohibitive computational latency, while data-driven models demand massive labeled datasets and generalize poorly from simplified simulations to complex multipath environments. This paper proposes RadioDiff-FS, a few-shot diffusion framework that adapts a pretrained main-path generator to multipath-rich target domains with only a small number of high-fidelity samples. The adaptation is grounded in a theoretical decomposition of the multipath RM into a dominant main-path component and a directionally sparse residual. This decomposition shows that the cross-domain shift corresponds to a bounded and geometrically structured feature translation rather than an arbitrary distribution change. A direction-consistency loss (DCL) is then introduced to constrain diffusion score updates along physically plausible propagation directions, thereby suppressing phase-inconsistent artifacts that arise in the low-data regime. Experiments show that RadioDiff-FS reduces NMSE by 59.5\% on static RMs and by 74.0\% on dynamic RMs relative to the vanilla diffusion baseline, achieving an SSIM of 0.9752 and a PSNR of 36.37 dB under severely limited supervision. Even in a one-shot setting with a single target-domain sample per scene, RadioDiff-FS outperforms all fully supervised baselines, confirming that the directional constraint provides an effective inductive bias under extreme data scarcity. Code is available at https://github.com/UNIC-Lab/RadioDiff-FS.

eess.SY↗

arXiv2026

BeamAgent: LLM-Aided MIMO Beamforming with Decoupled Intent Parsing and Alternating Optimization for Joint Site Selection and Precoding

Integrating large language models (LLMs) into wireless communication optimization is a promising yet challenging direction. Existing approaches either use LLMs as black-box solvers or code generators, tightly coupling them with numerical computation. However, LLMs lack the precision required for physical-layer optimization, and the scarcity of wireless training data makes domain-specific fine-tuning impractical. We propose BeamAgent, an LLM-aided MIMO beamforming framework that explicitly decouples semantic intent parsing from numerical optimization. The LLM serves solely as a semantic translator that converts natural language descriptions into structured spatial constraints. A dedicated gradient-based optimizer then jointly solves the discrete base station site selection and continuous precoding design through an alternating optimization algorithm. A scene-aware prompt enables grounded spatial reasoning without fine-tuning, and a multi-round interaction mechanism with dual-layer intent classification ensures robust constraint verification. A penalty-based loss function enforces dark-zone power constraints while releasing optimization degrees of freedom for bright-zone gain maximization. Experiments on a ray-tracing-based urban MIMO scenario show that BeamAgent achieves a bright-zone power of 84.0\,dB, outperforming exhaustive zero-forcing by 7.1 dB under the same dark-zone constraint. The end-to-end system reaches within 3.3 dB of the expert upper bound, with the full optimization completing in under 2 s on a laptop.

cs.IT↗

arXiv2026

Neural Electromagnetic Fields for High-Resolution Material Parameter Reconstruction

Creating functional Digital Twins, simulatable 3D replicas of the real world, is a central challenge in computer vision. Current methods like NeRF produce visually rich but functionally incomplete twins. The key barrier is the lack of underlying material properties (e.g., permittivity, conductivity). Acquiring this information for every point in a scene via non-contact, non-invasive sensing is a primary goal, but it demands solving a notoriously ill-posed physical inversion problem. Standard remote signals, like images and radio frequencies (RF), deeply entangle the unknown geometry, ambient field, and target materials. We introduce NEMF, a novel framework for dense, non-invasive physical inversion designed to build functional digital twins. Our key insight is a systematic disentanglement strategy. NEMF leverages high-fidelity geometry from images as a powerful anchor, which first enables the resolution of the ambient field. By constraining both geometry and field using only non-invasive data, the original ill-posed problem transforms into a well-posed, physics-supervised learning task. This transformation unlocks our core inversion module: a decoder. Guided by ambient RF signals and a differentiable layer incorporating physical reflection models, it learns to explicitly output a continuous, spatially-varying field of the scene's underlying material parameters. We validate our framework on high-fidelity synthetic datasets. Experiments show our non-invasive inversion reconstructs these material maps with high accuracy, and the resulting functional twin enables high-fidelity physical simulation. This advance moves beyond passive visual replicas, enabling the creation of truly functional and simulatable models of the physical world.

cs.CV↗

arXiv2026

NLoS Localization with Single Base Station Based on Radio Map

Accurate outdoor localization in Non-Line-of-Sight (NLoS) environments remains a critical challenge for wireless communication and sensing systems. Existing methods, including positioning based on the Global Navigation Satellite System (GNSS) and triple Base Stations (BSs) techniques, cannot provide reliable performance under NLoS conditions, particularly in dense urban areas with strong multipath effects. To address this limitation, we propose a single BS localization framework that integrates sequential signal measurements with prior radio information embedded in the Radio Map (RM). Using temporal measurement features and matching them with radio maps, the proposed method effectively mitigates the adverse impact of multipath propagation and reduces the dependence on LoS paths. Simulation experiments further evaluate the impact of different radio map construction strategies and the varying lengths of the measurement sequence on localization accuracy. Results demonstrate that the proposed scheme achieves sub-meter positioning accuracy in typical NLoS environments, highlighting its potential as a practical and robust solution for single-base-station deployment.

eess.SY↗

arXiv2026

RadioDiff-Flux: Efficient Radio Map Construction via Generative Denoise Diffusion Model Trajectory Midpoint Reuse

Accurate radio map (RM) construction is essential to enabling environment-aware and adaptive wireless communication. However, in future 6G scenarios characterized by high-speed network entities and fast-changing environments, it is very challenging to meet real-time requirements. Although generative diffusion models (DMs) can achieve state-of-the-art accuracy with second-level delay, their iterative nature leads to prohibitive inference latency in delay-sensitive scenarios. In this paper, by uncovering a key structural property of diffusion processes: the latent midpoints remain highly consistent across semantically similar scenes, we propose RadioDiff-Flux, a novel two-stage latent diffusion framework that decouples static environmental modeling from dynamic refinement, enabling the reuse of precomputed midpoints to bypass redundant denoising. In particular, the first stage generates a coarse latent representation using only static scene features, which can be cached and shared across similar scenarios. The second stage adapts this representation to dynamic conditions and transmitter locations using a pre-trained model, thereby avoiding repeated early-stage computation. The proposed RadioDiff-Flux significantly reduces inference time while preserving fidelity. Experiment results show that RadioDiff-Flux can achieve up to 50 acceleration with less than 0.15% accuracy loss, demonstrating its practical utility for fast, scalable RM generation in future 6G networks.

cs.LG↗

arXiv2025

RMSup: Physics-Informed Radio Map Super-Resolution for Compute-Enhanced Integrated Sensing and Communications

Radio maps (RMs) provide a spatially continuous description of wireless propagation, enabling cross-layer optimization and unifying communication and sensing for integrated sensing and communications (ISAC). However, constructing high-fidelity RMs at operational scales is difficult, since physics-based solvers are time-consuming and require precise scene models, while learning methods degrade under incomplete priors and sparse measurements, often smoothing away critical discontinuities. We present RMSup, a physics-informed super-resolution framework that functions with uniform sparse sampling and imperfect environment priors. RMSup extracts Helmholtz equation-informed boundary and singularity prompts from the measurements, fuses them with base-station side information and coarse scene descriptors as conditional inputs, and employs a boundary-aware dual-head network to reconstruct a high-fidelity RM and recover environmental contours jointly. Experimental results show the proposed RMsup achieves state-of-the-art performance both in RM construction and ISAC-related environment sensing.

eess.SP↗

arXiv2025

iRadioDiff: Physics-Informed Diffusion Model for Indoor Radio Map Construction and Localization

Radio maps (RMs) serve as environment-aware electromagnetic (EM) representations that connect scenario geometry and material properties to the spatial distribution of signal strength, enabling localization without costly in-situ measurements. However, constructing high-fidelity indoor RMs remains challenging due to the prohibitive latency of EM solvers and the limitations of learning-based methods, which often rely on sparse measurements or assumptions of homogeneous material, which are misaligned with the heterogeneous and multipath-rich nature of indoor environments. To overcome these challenges, we propose iRadioDiff, a sampling-free diffusion-based framework for indoor RM construction. iRadioDiff is conditioned on access point (AP) positions, and physics-informed prompt encoded by material reflection and transmission coefficients. It further incorporates multipath-critical priors, including diffraction points, strong transmission boundaries, and line-of-sight (LoS) contours, to guide the generative process via conditional channels and boundary-weighted objectives. This design enables accurate modeling of nonstationary field discontinuities and efficient construction of physically consistent RMs. Experiments demonstrate that iRadioDiff achieves state-of-the-art performance in indoor RM construction and received signal strength based indoor localization, which offers effective generalization across layouts and material configurations. Code is available at https://github.com/UNIC-Lab/iRadioDiff.

cs.LG↗

arXiv2025

RadioMapMotion: A Dataset and Baseline for Proactive Spatio-Temporal Radio Environment Prediction

Radio maps (RMs), which provide location-based pathloss estimations, are fundamental to enabling proactive, environment-aware communication in 6G networks. However, existing deep learning-based methods for RM construction often model dynamic environments as a series of independent static snapshots, thereby omitting the temporal continuity inherent in signal propagation changes caused by the motion of dynamic entities. To address this limitation, we propose the task of spatio-temporal RM prediction, which involves forecasting a sequence of future maps from historical observations. A key barrier to this predictive approach has been the lack of datasets capturing continuous environmental evolution. To fill this gap, we introduce RadioMapMotion, the first large-scale public dataset of continuous RM sequences generated from physically consistent vehicle trajectories. As a baseline for this task, we propose RadioLSTM, a UNet architecture based on Convolutional Long Short-Term Memory (ConvLSTM) and designed for multi-step sequence forecasting. Experimental evaluations show that RadioLSTM achieves higher prediction accuracy and structural fidelity compared to representative baseline methods. Furthermore, the model exhibits a low inference latency, indicating its potential suitability for real-time network operations. Our project will be publicly released at: https://github.com/UNIC-Lab/RadioMapMotion upon paper acceptance.

cs.NI↗

arXiv2025

RadioDiff-$k^2$: Helmholtz Equation Informed Generative Diffusion Model for Multi-Path Aware Radio Map Construction

In this paper, we propose a novel physics-informed generative learning approach, named RadioDiff-$k^2$, for accurate and efficient multipath-aware radio map (RM) construction. As future wireless communication evolves towards environment-aware paradigms, the accurate construction of RMs becomes crucial yet highly challenging. Conventional electromagnetic (EM)-based methods, such as full-wave solvers and ray-tracing approaches, exhibit substantial computational overhead and limited adaptability to dynamic scenarios. Although existing neural network (NN) approaches have efficient inferencing speed, they lack sufficient consideration of the underlying physics of EM wave propagation, limiting their effectiveness in accurately modeling critical EM singularities induced by complex multipath environments. To address these fundamental limitations, we propose a novel physics-inspired RM construction method guided explicitly by the Helmholtz equation, which inherently governs EM wave propagation. Specifically, based on the analysis of partial differential equations (PDEs), we theoretically establish a direct correspondence between EM singularities, which correspond to the critical spatial features influencing wireless propagation, and regions defined by negative wave numbers in the Helmholtz equation. We then design an innovative dual diffusion model (DM)-based large artificial intelligence framework comprising one DM dedicated to accurately inferring EM singularities and another DM responsible for reconstructing the complete RM using these singularities along with environmental contextual information. Experimental results demonstrate that the proposed RadioDiff-$k^2$ framework achieves state-of-the-art (SOTA) performance in both image-level RM construction and localization tasks, while maintaining inference latency within a few hundred milliseconds.

cs.LG↗

arXiv2025

Graph Neural Network-Based Multicast Routing for On-Demand Streaming Services in 6G Networks

The increase of bandwidth-intensive applications in sixth-generation (6G) wireless networks, such as real-time volumetric streaming and multi-sensory extended reality, demands intelligent multicast routing solutions capable of delivering differentiated quality-of-service (QoS) at scale. Traditional shortest-path and multicast routing algorithms are either computationally prohibitive or structurally rigid, and they often fail to support heterogeneous user demands, leading to suboptimal resource utilization. Neural network-based approaches, while offering improved inference speed, typically lack topological generalization and scalability. To address these limitations, this paper presents a graph neural network (GNN)-based multicast routing framework that jointly minimizes total transmission cost and supports user-specific video quality requirements. The routing problem is formulated as a constrained minimum-flow optimization task, and a reinforcement learning algorithm is developed to sequentially construct efficient multicast trees by reusing paths and adapting to network dynamics. A graph attention network (GAT) is employed as the encoder to extract context-aware node embeddings, while a long short-term memory (LSTM) module models the sequential dependencies in routing decisions. Extensive simulations demonstrate that the proposed method closely approximates optimal dynamic programming-based solutions while significantly reducing computational complexity. The results also confirm strong generalization to large-scale and dynamic network topologies, highlighting the method's potential for real-time deployment in 6G multimedia delivery scenarios. Code is available at https://github.com/UNIC-Lab/GNN-Routing.

cs.NI↗

arXiv2025

RadioFlow: Efficient Radio Map Construction Framework with Flow Matching

Accurate and real-time radio map (RM) generation is crucial for next-generation wireless systems, yet diffusion-based approaches often suffer from large model sizes, slow iterative denoising, and high inference latency, which hinder practical deployment. To overcome these limitations, we propose \textbf{RadioFlow}, a novel flow-matching-based generative framework that achieves high-fidelity RM generation through single-step efficient sampling. Unlike conventional diffusion models, RadioFlow learns continuous transport trajectories between noise and data, enabling both training and inference to be significantly accelerated while preserving reconstruction accuracy. Comprehensive experiments demonstrate that RadioFlow achieves state-of-the-art performance with \textbf{up to 8$\times$ fewer parameters} and \textbf{over 4$\times$ faster inference} compared to the leading diffusion-based baseline (RadioDiff). This advancement provides a promising pathway toward scalable, energy-efficient, and real-time electromagnetic digital twins for future 6G networks. We release the code at \href{https://github.com/Hxxxz0/RadioFlow}{GitHub}.

cs.CV↗

arXiv2025

UrbanMIMOMap: A Ray-Traced MIMO CSI Dataset with Precoding-Aware Maps and Benchmarks

Sixth generation (6G) systems require environment-aware communication, driven by native artificial intelligence (AI) and integrated sensing and communication (ISAC). Radio maps (RMs), providing spatially continuous channel information, are key enablers. However, generating high-fidelity RM ground truth via electromagnetic (EM) simulations is computationally intensive, motivating machine learning (ML)-based RM construction. The effectiveness of these data-driven methods depends on large-scale, high-quality training data. Current public datasets often focus on single-input single-output (SISO) and limited information, such as path loss, which is insufficient for advanced multi-input multi-output (MIMO) systems requiring detailed channel state information (CSI). To address this gap, this paper presents UrbanMIMOMap, a novel large-scale urban MIMO CSI dataset generated using high-precision ray tracing. UrbanMIMOMap offers comprehensive complex CSI matrices across a dense spatial grid, going beyond traditional path loss data. This rich CSI is vital for constructing high-fidelity RMs and serves as a fundamental resource for data-driven RM generation, including deep learning. We demonstrate the dataset's utility through baseline performance evaluations of representative ML methods for RM construction. This work provides a crucial dataset and reference for research in high-precision RM generation, MIMO spatial performance, and ML for 6G environment awareness. The code and data for this work are available at: https://github.com/UNIC-Lab/UrbanMIMOMap.

cs.LG↗

arXiv2025

RadioDiff-Loc: Diffusion Model Enhanced Scattering Congnition for NLoS Localization with Sparse Radio Map Estimation

Accurate localization of non-cooperative signal sources in non-line-of-sight (NLoS) environments remains a critical challenge with a wide range of applications, including autonomous navigation, industrial automation, and emergency response. In such settings, traditional positioning techniques relying on line-of-sight (LoS) or cooperative signaling fail due to severe multipath propagation and unknown transmit power. This paper proposes a novel generative inference framework for NLoS localization based on conditional diffusion models. By leveraging the physical insight that diffracted electromagnetic energy concentrates near building edges, we develop a sampling strategy that collects sparse received signal strength (RSS) measurements at the geometric vertices of obstacles--locations that maximize Fisher information and mutual information with respect to the unknown source. To overcome the lack of known transmission power, we normalize all sampled RSS values relative to the maximum observed intensity, enabling the construction of a power-invariant radio map (RM). A conditional diffusion model is trained to reconstruct the full RM based on environmental layout and sparse RSS observations. Localization is then achieved by identifying the brightest point on the generated RM. Moreover, the proposed framework is compatible with existing RSS-based localization algorithms, enabling a dual-driven paradigm that fuses physical knowledge and data-driven inference for improved accuracy. Extensive theoretical analysis and empirical validation demonstrate that our approach achieves high localization accuracy with significantly reduced sampling cost, offering a scalable and physically grounded solution for non-cooperative NLoS emitter localization.

eess.SY↗

arXiv2025

QoE-Aware Service Provision for Mobile AR Rendering: An Agent-Driven Approach

Mobile augmented reality (MAR) is envisioned as a key immersive application in 6G, enabling virtual content rendering aligned with the physical environment through device pose estimation. In this paper, we propose a novel agent-driven communication service provisioning approach for edge-assisted MAR, aiming to reduce communication overhead between MAR devices and the edge server while ensuring the quality of experience (QoE). First, to address the inaccessibility of MAR application-specific information to the network controller, we establish a digital agent powered by large language models (LLMs) on behalf of the MAR service provider, bridging the data and function gap between the MAR service and network domains. Second, to cope with the user-dependent and dynamic nature of data traffic patterns for individual devices, we develop a user-level QoE modeling method that captures the relationship between communication resource demands and perceived user QoE, enabling personalized, agent-driven communication resource management. Trace-driven simulation results demonstrate that the proposed approach outperforms conventional LLM-based QoE-aware service provisioning methods in both user-level QoE modeling accuracy and communication resource efficiency.

cs.NI↗

arXiv2025

RadioMamba: Breaking the Accuracy-Efficiency Trade-off in Radio Map Construction via a Hybrid Mamba-UNet

Radio map (RM) has recently attracted much attention since it can provide real-time and accurate spatial channel information for 6G services and applications. However, current deep learning-based methods for RM construction exhibit well known accuracy-efficiency trade-off. In this paper, we introduce RadioMamba, a hybrid Mamba-UNet architecture for RM construction to address the trade-off. Generally, accurate RM construction requires modeling long-range spatial dependencies, reflecting the global nature of wave propagation physics. RadioMamba utilizes a Mamba-Convolutional block where the Mamba branch captures these global dependencies with linear complexity, while a parallel convolutional branch extracts local features. This hybrid design generates feature representations that capture both global context and local detail. Experiments show that RadioMamba achieves higher accuracy than existing methods, including diffusion models, while operating nearly 20 times faster and using only 2.9\% of the model parameters. By improving both accuracy and efficiency, RadioMamba presents a viable approach for real-time intelligent optimization in next generation wireless systems.

eess.SP↗

arXiv2025

Latent Diffusion Model Based Denoising Receiver for 6G Semantic Communication: From Stochastic Differential Theory to Application

In this paper, a novel semantic communication framework empowered by generative artificial intelligence (GAI) is proposed, to enhance the robustness against both channel noise and transmission data distribution shifts. A theoretical foundation is established using stochastic differential equations (SDEs), from which a closed-form mapping between any signal-to-noise ratio (SNR) and the optimal denoising timestep is derived. Moreover, to address distribution mismatch, a mathematical scaling method is introduced to align received semantic features with the training distribution of the GAI. Built on this theoretical foundation, a latent diffusion model (LDM)-based semantic communication framework is proposed that combines a variational autoencoder for semantic features extraction, where a pretrained diffusion model is used for denoising. The proposed system is a training-free framework that supports zero-shot generalization, and achieves superior performance under low-SNR and out-of-distribution conditions, offering a scalable and robust solution for future 6G semantic communication systems. Experimental results demonstrate that the proposed semantic communication framework achieves state-of-the-art performance in both pixel-level accuracy and semantic perceptual quality, consistently outperforming baselines across a wide range of SNRs and data distributions without any fine-tuning or post-training.

cs.LG↗

arXiv2025

RadioDiff-3D: A 3D$\times$3D Radio Map Dataset and Generative Diffusion Based Benchmark for 6G Environment-Aware Communication

Radio maps (RMs) serve as a critical foundation for enabling environment-aware wireless communication, as they provide the spatial distribution of wireless channel characteristics. Despite recent progress in RM construction using data-driven approaches, most existing methods focus solely on pathloss prediction in a fixed 2D plane, neglecting key parameters such as direction of arrival (DoA), time of arrival (ToA), and vertical spatial variations. Such a limitation is primarily due to the reliance on static learning paradigms, which hinder generalization beyond the training data distribution. To address these challenges, we propose UrbanRadio3D, a large-scale, high-resolution 3D RM dataset constructed via ray tracing in realistic urban environments. UrbanRadio3D is over 37$\times$3 larger than previous datasets across a 3D space with 3 metrics as pathloss, DoA, and ToA, forming a novel 3D$\times$33D dataset with 7$\times$3 more height layers than prior state-of-the-art (SOTA) dataset. To benchmark 3D RM construction, a UNet with 3D convolutional operators is proposed. Moreover, we further introduce RadioDiff-3D, a diffusion-model-based generative framework utilizing the 3D convolutional architecture. RadioDiff-3D supports both radiation-aware scenarios with known transmitter locations and radiation-unaware settings based on sparse spatial observations. Extensive evaluations on UrbanRadio3D validate that RadioDiff-3D achieves superior performance in constructing rich, high-dimensional radio maps under diverse environmental dynamics. This work provides a foundational dataset and benchmark for future research in 3D environment-aware communication. The dataset is available at https://github.com/UNIC-Lab/UrbanRadio3D.

cs.LG↗

arXiv2025

On-Demand Multimedia Delivery in 6G: An Optimal-Cost Steiner Tree Approach

The exponential growth of multimedia data traffic in 6G networks poses unprecedented challenges for immersive communication, where ultra-high-definition, multi-quality streaming must be delivered on demand while minimizing network operational costs. Traditional routing approaches, such as shortest-path algorithms, fail to optimize flow multiplexing across multiple destinations, while conventional Steiner tree methods cannot accommodate heterogeneous quality-of-service (QoS) requirements-a critical need for 6G's personalized services. In this paper, we address a fundamental but unsolved challenge: the minimum flow problem (MFP) with multi-destination, heterogeneous outflow demands, which is pivotal for efficient multimedia distribution such as adaptive-resolution video streaming. To overcome the limitations of existing methods, we propose a two-stage dynamic programming-enhanced On-demand Steiner Tree (OST) algorithm, the first approach that jointly optimizes flow aggregation and QoS-aware path selection for arbitrary outflow requirements. We rigorously prove the optimality of OST using mathematical induction, demonstrating that it guarantees the minimum-cost multicast flow under differentiated service constraints. Extensive experiments in 6G-like multimedia transmission scenarios show that OST reduces total network flow by over 10% compared to state-of-the-art methods while ensuring on-demand QoS fulfillment. The complete code is available at https://github.com/UNIC-Lab/OST.

cs.NI↗