arXiv subjects

Xiuqiang He

Publications and source records attributed to Xiuqiang He.

At least 109 records · Page 6Linked to original sources

arXiv2021

Mode Clustering Based Dynamic Equivalent Modeling of Wind Farm for Small-Signal Stability Analysis

Dynamic equivalent models (DEMs) are necessities for the small-signal stability (SSS) analysis of the power system with large-scale wind farms (WFs). This paper proposes a mode clustering based dynamic equivalent modeling method of WFs for the SSS analysis. It is deemed that a DEM can be used to represent the whole WF to evaluate its impact on the SSS of power systems, as long as the frequency response of the DEM adequately matches that of the detailed WF model around the frequency of oscillation modes of concern. Focusing on the concerned oscillation modes in the small-signal model of the whole WF, closely distributed modes of them on the complex plane are classified into a cluster and then represented by a single mode. By the linear superposition principle, the modal participation factor (MPF) regarding each of modal clusters are superimposed, generating a feature vector for each wind turbine (WT). Based on the feature vectors, the oscillation feature similarity of the WTs as well as their aggregation can be evaluated and performed easily. Taking the DC-link voltage control (DVC) mode of full-power WT converters as an example, the aggregated DEM is verified by frequency-domain analyses and time-domain simulations.

eess.SY↗

arXiv2021

Top-N Recommendation with Counterfactual User Preference Simulation

Top-N recommendation, which aims to learn user ranking-based preference, has long been a fundamental problem in a wide range of applications. Traditional models usually motivate themselves by designing complex or tailored architectures based on different assumptions. However, the training data of recommender system can be extremely sparse and imbalanced, which poses great challenges for boosting the recommendation performance. To alleviate this problem, in this paper, we propose to reformulate the recommendation task within the causal inference framework, which enables us to counterfactually simulate user ranking-based preferences to handle the data scarce problem. The core of our model lies in the counterfactual question: "what would be the user's decision if the recommended items had been different?". To answer this question, we firstly formulate the recommendation process with a series of structural equation models (SEMs), whose parameters are optimized based on the observed data. Then, we actively indicate many recommendation lists (called intervention in the causal inference terminology) which are not recorded in the dataset, and simulate user feedback according to the learned SEMs for generating new training samples. Instead of randomly intervening on the recommendation list, we design a learning-based method to discover more informative training samples. Considering that the learned SEMs can be not perfect, we, at last, theoretically analyze the relation between the number of generated samples and the model prediction error, based on which a heuristic method is designed to control the negative effect brought by the prediction error. Extensive experiments are conducted based on both synthetic and real-world datasets to demonstrate the effectiveness of our framework.

cs.IR↗

arXiv2021

Retrieval & Interaction Machine for Tabular Data Prediction

Prediction over tabular data is an essential task in many data science applications such as recommender systems, online advertising, medical treatment, etc. Tabular data is structured into rows and columns, with each row as a data sample and each column as a feature attribute. Both the columns and rows of the tabular data carry useful patterns that could improve the model prediction performance. However, most existing models focus on the cross-column patterns yet overlook the cross-row patterns as they deal with single samples independently. In this work, we propose a general learning framework named Retrieval & Interaction Machine (RIM) that fully exploits both cross-row and cross-column patterns among tabular data. Specifically, RIM first leverages search engine techniques to efficiently retrieve useful rows of the table to assist the label prediction of the target row, then uses feature interaction networks to capture the cross-column patterns among the target row and the retrieved rows so as to make the final label prediction. We conduct extensive experiments on 11 datasets of three important tasks, i.e., CTR prediction (classification), top-n recommendation (ranking) and rating prediction (regression). Experimental results show that RIM achieves significant improvements over the state-of-the-art and various baselines, demonstrating the superiority and efficacy of RIM.

cs.IR↗

arXiv2021

Synchronization Instability of Inverter-Based Generation During Asymmetrical Grid Faults

The transient stability of traditional power systems is concerned with the ability of generators to stay synchronized with the positive-sequence voltage of the network, whether for symmetrical or asymmetrical faults. In contrast, both positive- and negative-sequence synchronizations should be of concern for inverter-based generation (IBG) under asymmetrical faults. This is because the latest grid codes stipulate that IBG should inject dual-sequence current when riding through asymmetrical faults. Currently, much less is known about the synchronization stability during asymmetrical faults. This significantly differs from the positive-sequence synchronization alone because the coupled dual-sequence synchronization is involved. This paper aims to fill this gap. Considering the sequence coupling under asymmetrical faults, the dual-sequence synchronization model of IBG is developed. Based on the model, the conditions that steady-state equilibrium points should follow are identified. The conditions throw light on the possible types of synchronization instability, including the positive-sequence dominated instability and the negative-sequence dominated one. For different types of instability, the dominant factors are analyzed quantitatively, which are reflected by the limit on the current injection amplitude. Exceeding the limit will lead to the loss of both positive- and negative-sequence synchronizations. The model and the analysis are verified by simulations and hardware-in-the-loop experiments.

eess.SY↗

arXiv2021

AutoFT: Automatic Fine-Tune for Parameters Transfer Learning in Click-Through Rate Prediction

Recommender systems are often asked to serve multiple recommendation scenarios or domains. Fine-tuning a pre-trained CTR model from source domains and adapting it to a target domain allows knowledge transferring. However, optimizing all the parameters of the pre-trained network may result in over-fitting if the target dataset is small and the number of parameters is large. This leads us to think of directly reusing parameters in the pre-trained model which represent more general features learned from multiple domains. However, the design of freezing or fine-tuning layers of parameters requires much manual effort since the decision highly depends on the pre-trained model and target instances. In this work, we propose an end-to-end transfer learning framework, called Automatic Fine-Tuning (AutoFT), for CTR prediction. AutoFT consists of a field-wise transfer policy and a layer-wise transfer policy. The field-wise transfer policy decides how the pre-trained embedding representations are frozen or fine-tuned based on the given instance from the target domain. The layer-wise transfer policy decides how the high?order feature representations are transferred layer by layer. Extensive experiments on two public benchmark datasets and one private industrial dataset demonstrate that AutoFT can significantly improve the performance of CTR prediction compared with state-of-the-art transferring approaches.

cs.IR↗

arXiv2021

Dual Graph enhanced Embedding Neural Network for CTR Prediction

CTR prediction, which aims to estimate the probability that a user will click an item, plays a crucial role in online advertising and recommender system. Feature interaction modeling based and user interest mining based methods are the two kinds of most popular techniques that have been extensively explored for many years and have made great progress for CTR prediction. However, (1) feature interaction based methods which rely heavily on the co-occurrence of different features, may suffer from the feature sparsity problem (i.e., many features appear few times); (2) user interest mining based methods which need rich user behaviors to obtain user's diverse interests, are easy to encounter the behavior sparsity problem (i.e., many users have very short behavior sequences). To solve these problems, we propose a novel module named Dual Graph enhanced Embedding, which is compatible with various CTR prediction models to alleviate these two problems. We further propose a Dual Graph enhanced Embedding Neural Network (DG-ENN) for CTR prediction. Dual Graph enhanced Embedding exploits the strengths of graph representation with two carefully designed learning strategies (divide-and-conquer, curriculum-learning-inspired organized learning) to refine the embedding. We conduct comprehensive experiments on three real-world industrial datasets. The experimental results show that our proposed DG-ENN significantly outperforms state-of-the-art CTR prediction models. Moreover, when applying to state-of-the-art CTR prediction models, Dual graph enhanced embedding always obtains better performance. Further case studies prove that our proposed dual graph enhanced embedding could alleviate the feature sparsity and behavior sparsity problems. Our framework will be open-source based on MindSpore in the near future.

cs.IR↗

arXiv2021

An Embedding Learning Framework for Numerical Features in CTR Prediction

Click-Through Rate (CTR) prediction is critical for industrial recommender systems, where most deep CTR models follow an Embedding \& Feature Interaction paradigm. However, the majority of methods focus on designing network architectures to better capture feature interactions while the feature embedding, especially for numerical features, has been overlooked. Existing approaches for numerical features are difficult to capture informative knowledge because of the low capacity or hard discretization based on the offline expertise feature engineering. In this paper, we propose a novel embedding learning framework for numerical features in CTR prediction (AutoDis) with high model capacity, end-to-end training and unique representation properties preserved. AutoDis consists of three core components: meta-embeddings, automatic discretization and aggregation. Specifically, we propose meta-embeddings for each numerical field to learn global knowledge from the perspective of field with a manageable number of parameters. Then the differentiable automatic discretization performs soft discretization and captures the correlations between the numerical features and meta-embeddings. Finally, distinctive and informative embeddings are learned via an aggregation function. Comprehensive experiments on two public and one industrial datasets are conducted to validate the effectiveness of AutoDis. Moreover, AutoDis has been deployed onto a mainstream advertising platform, where online A/B test demonstrates the improvement over the base model by 2.1% and 2.7% in terms of CTR and eCPM, respectively. In addition, the code of our framework is publicly available in MindSpore(https://gitee.com/mindspore/mindspore/tree/master/model_zoo/research/recommend/autodis).

cs.IR↗

arXiv2021

ScaleFreeCTR: MixCache-based Distributed Training System for CTR Models with Huge Embedding Table

Because of the superior feature representation ability of deep learning, various deep Click-Through Rate (CTR) models are deployed in the commercial systems by industrial companies. To achieve better performance, it is necessary to train the deep CTR models on huge volume of training data efficiently, which makes speeding up the training process an essential problem. Different from the models with dense training data, the training data for CTR models is usually high-dimensional and sparse. To transform the high-dimensional sparse input into low-dimensional dense real-value vectors, almost all deep CTR models adopt the embedding layer, which easily reaches hundreds of GB or even TB. Since a single GPU cannot afford to accommodate all the embedding parameters, when performing distributed training, it is not reasonable to conduct the data-parallelism only. Therefore, existing distributed training platforms for recommendation adopt model-parallelism. Specifically, they use CPU (Host) memory of servers to maintain and update the embedding parameters and utilize GPU worker to conduct forward and backward computations. Unfortunately, these platforms suffer from two bottlenecks: (1) the latency of pull \& push operations between Host and GPU; (2) parameters update and synchronization in the CPU servers. To address such bottlenecks, in this paper, we propose the ScaleFreeCTR: a MixCache-based distributed training system for CTR models. Specifically, in SFCTR, we also store huge embedding table in CPU but utilize GPU instead of CPU to conduct embedding synchronization efficiently. To reduce the latency of data transfer between both GPU-Host and GPU-GPU, the MixCache mechanism and Virtual Sparse Id operation are proposed. Comprehensive experiments and ablation studies are conducted to demonstrate the effectiveness and efficiency of SFCTR.

cs.IR↗

arXiv2021

Modeling High-order Interactions across Multi-interests for Micro-video Recommendation

Personalized recommendation system has become pervasive in various video platform. Many effective methods have been proposed, but most of them didn't capture the user's multi-level interest trait and dependencies between their viewed micro-videos well. To solve these problems, we propose a Self-over-Co Attention module to enhance user's interest representation. In particular, we first use co-attention to model correlation patterns across different levels and then use self-attention to model correlation patterns within a specific level. Experimental results on filtered public datasets verify that our presented module is useful.

cs.CV↗

arXiv2021

Deep Learning for Click-Through Rate Estimation

Click-through rate (CTR) estimation plays as a core function module in various personalized online services, including online advertising, recommender systems, and web search etc. From 2015, the success of deep learning started to benefit CTR estimation performance and now deep CTR models have been widely applied in many industrial platforms. In this survey, we provide a comprehensive review of deep learning models for CTR estimation tasks. First, we take a review of the transfer from shallow to deep CTR models and explain why going deep is a necessary trend of development. Second, we concentrate on explicit feature interaction learning modules of deep CTR models. Then, as an important perspective on large platforms with abundant user histories, deep behavior models are discussed. Moreover, the recently emerged automated methods for deep CTR architecture design are presented. Finally, we summarize the survey and discuss the future prospects of this field.

cs.IR↗

arXiv2021

An Adversarial Imitation Click Model for Information Retrieval

Modern information retrieval systems, including web search, ads placement, and recommender systems, typically rely on learning from user feedback. Click models, which study how users interact with a ranked list of items, provide a useful understanding of user feedback for learning ranking models. Constructing "right" dependencies is the key of any successful click model. However, probabilistic graphical models (PGMs) have to rely on manually assigned dependencies, and oversimplify user behaviors. Existing neural network based methods promote PGMs by enhancing the expressive ability and allowing flexible dependencies, but still suffer from exposure bias and inferior estimation. In this paper, we propose a novel framework, Adversarial Imitation Click Model (AICM), based on imitation learning. Firstly, we explicitly learn the reward function that recovers users' intrinsic utility and underlying intentions. Secondly, we model user interactions with a ranked list as a dynamic system instead of one-step click prediction, alleviating the exposure bias problem. Finally, we minimize the JS divergence through adversarial training and learn a stable distribution of click sequences, which makes AICM generalize well across different distributions of ranked lists. A theoretical analysis has indicated that AICM reduces the exposure bias from $O(T^2)$ to $O(T)$. Our studies on a public web search dataset show that AICM not only outperforms state-of-the-art models in traditional click metrics but also achieves superior performance in addressing the exposure bias and recovering the underlying patterns of click sequences.

cs.IR↗

arXiv2021

Less Is Better: Unweighted Data Subsampling via Influence Function

In the time of Big Data, training complex models on large-scale data sets is challenging, making it appealing to reduce data volume for saving computation resources by subsampling. Most previous works in subsampling are weighted methods designed to help the performance of subset-model approach the full-set-model, hence the weighted methods have no chance to acquire a subset-model that is better than the full-set-model. However, we question that how can we achieve better model with less data? In this work, we propose a novel Unweighted Influence Data Subsampling (UIDS) method, and prove that the subset-model acquired through our method can outperform the full-set-model. Besides, we show that overly confident on a given test set for sampling is common in Influence-based subsampling methods, which can eventually cause our subset-model's failure in out-of-sample test. To mitigate it, we develop a probabilistic sampling scheme to control the worst-case risk over all distributions close to the empirical distribution. The experiment results demonstrate our methods superiority over existed subsampling methods in diverse tasks, such as text classification, image classification, click-through prediction, etc.

cs.LG↗

arXiv2020

U-rank: Utility-oriented Learning to Rank with Implicit Feedback

Learning to rank with implicit feedback is one of the most important tasks in many real-world information systems where the objective is some specific utility, e.g., clicks and revenue. However, we point out that existing methods based on probabilistic ranking principle do not necessarily achieve the highest utility. To this end, we propose a novel ranking framework called U-rank that directly optimizes the expected utility of the ranking list. With a position-aware deep click-through rate prediction model, we address the attention bias considering both query-level and item-level features. Due to the item-specific attention bias modeling, the optimization for expected utility corresponds to a maximum weight matching on the item-position bipartite graph. We base the optimization of this objective in an efficient Lambdaloss framework, which is supported by both theoretical and empirical analysis. We conduct extensive experiments for both web search and recommender systems over three benchmark datasets and two proprietary datasets, where the performance gain of U-rank over state-of-the-arts is demonstrated. Moreover, our proposed U-rank has been deployed on a large-scale commercial recommender and a large improvement over the production baseline has been observed in an online A/B testing.

cs.IR↗

arXiv2020

Transient Stability of Power Systems Integrated With Inverter-Based Generation

The fundamental mechanism of transient stability of the conventional power system can be physically understood with the rotor swing dynamics of synchronous generators (SGs). The basic factor affecting the transient stability is the power-angle relationship among the SGs. The integration of a large number of inverter-based generations (IBGs) into the power system inevitably changes the original power-angle relationship, therefore leading to a more complicated transient stability mechanism. In this letter, the impact of IBG on the power system transient stability is analytically investigated. It is shown that the connection of IBG changes the original power-angle relationship into a nonsinusoidal curve, introduces a limit on the peak of the rotor swing, and therefore brings about a new bottleneck for the transient stability.

eess.SY↗

arXiv2020

A Practical Incremental Method to Train Deep CTR Models

Deep learning models in recommender systems are usually trained in the batch mode, namely iteratively trained on a fixed-size window of training data. Such batch mode training of deep learning models suffers from low training efficiency, which may lead to performance degradation when the model is not produced on time. To tackle this issue, incremental learning is proposed and has received much attention recently. Incremental learning has great potential in recommender systems, as two consecutive window of training data overlap most of the volume. It aims to update the model incrementally with only the newly incoming samples from the timestamp when the model is updated last time, which is much more efficient than the batch mode training. However, most of the incremental learning methods focus on the research area of image recognition where new tasks or classes are learned over time. In this work, we introduce a practical incremental method to train deep CTR models, which consists of three decoupled modules (namely, data, feature and model module). Our method can achieve comparable performance to the conventional batch mode training with much better training efficiency. We conduct extensive experiments on a public benchmark and a private dataset to demonstrate the effectiveness of our proposed method.

cs.IR↗

arXiv2020

Item Tagging for Information Retrieval: A Tripartite Graph Neural Network based Approach

Tagging has been recognized as a successful practice to boost relevance matching for information retrieval (IR), especially when items lack rich textual descriptions. A lot of research has been done for either multi-label text categorization or image annotation. However, there is a lack of published work that targets at item tagging specifically for IR. Directly applying a traditional multi-label classification model for item tagging is sub-optimal, due to the ignorance of unique characteristics in IR. In this work, we propose to formulate item tagging as a link prediction problem between item nodes and tag nodes. To enrich the representation of items, we leverage the query logs available in IR tasks, and construct a query-item-tag tripartite graph. This formulation results in a TagGNN model that utilizes heterogeneous graph neural networks with multiple types of nodes and edges. Different from previous research, we also optimize both full tag prediction and partial tag completion cases in a unified framework via a primary-dual loss mechanism. Experimental results on both open and industrial datasets show that our TagGNN approach outperforms the state-of-the-art multi-label classification approaches.

cs.IR↗

arXiv2020

Regularized Two-Branch Proposal Networks for Weakly-Supervised Moment Retrieval in Videos

Video moment retrieval aims to localize the target moment in an video according to the given sentence. The weak-supervised setting only provides the video-level sentence annotations during training. Most existing weak-supervised methods apply a MIL-based framework to develop inter-sample confrontment, but ignore the intra-sample confrontment between moments with semantically similar contents. Thus, these methods fail to distinguish the target moment from plausible negative moments. In this paper, we propose a novel Regularized Two-Branch Proposal Network to simultaneously consider the inter-sample and intra-sample confrontments. Concretely, we first devise a language-aware filter to generate an enhanced video stream and a suppressed video stream. We then design the sharable two-branch proposal module to generate positive proposals from the enhanced stream and plausible negative proposals from the suppressed one for sufficient confrontment. Further, we apply the proposal regularization to stabilize the training process and improve model performance. The extensive experiments show the effectiveness of our method. Our code is released at here.

cs.CV↗

arXiv2020

AutoFIS: Automatic Feature Interaction Selection in Factorization Models for Click-Through Rate Prediction

Learning feature interactions is crucial for click-through rate (CTR) prediction in recommender systems. In most existing deep learning models, feature interactions are either manually designed or simply enumerated. However, enumerating all feature interactions brings large memory and computation cost. Even worse, useless interactions may introduce noise and complicate the training process. In this work, we propose a two-stage algorithm called Automatic Feature Interaction Selection (AutoFIS). AutoFIS can automatically identify important feature interactions for factorization models with computational cost just equivalent to training the target model to convergence. In the \emph{search stage}, instead of searching over a discrete set of candidate feature interactions, we relax the choices to be continuous by introducing the architecture parameters. By implementing a regularized optimizer over the architecture parameters, the model can automatically identify and remove the redundant feature interactions during the training process of the model. In the \emph{re-train stage}, we keep the architecture parameters serving as an attention unit to further boost the performance. Offline experiments on three large-scale datasets (two public benchmarks, one private) demonstrate that AutoFIS can significantly improve various FM based models. AutoFIS has been deployed onto the training platform of Huawei App Store recommendation service, where a 10-day online A/B test demonstrated that AutoFIS improved the DeepFM model by 20.3\% and 20.1\% in terms of CTR and CVR respectively.

cs.LG↗