arXiv subjects

Xizheng Ma

Publications and source records attributed to Xizheng Ma.

17 recordsLinked to original sources

arXiv2026

Unified Flux Control Architecture for Fluxonium Qubits

Control architectures that reduce hardware overhead while maintaining high-fidelity operations are essential for the continued scaling of superconducting quantum processors. Here we experimentally realize a unified control architecture for fluxonium qubits, in which both transverse ($XY$) and longitudinal ($Z$) operations are implemented through a single flux-control channel driven by a single arbitrary waveform generator channel. This architecture imposes competing requirements on the shared control channel, which must simultaneously support low-frequency flux transmission for reset operations while strongly attenuating broadband noise near the qubit transition frequency. We address this challenge through frequency-selective cryogenic filtering together with compensated waveform synthesis that corrects the pulse distortion introduced by the filtered control line. Experimentally, this approach preserves coherence times above 100 $μ$s while enabling active reset with approximately 98% fidelity and 20-ns single-qubit gates with fidelities exceeding 99.99%. We further demonstrate FPGA-native instruction-level waveform synthesis based on reusable pulse primitives for unified flux control. These results establish unified flux control as a scalable architecture for fluxonium qubits that reduces control hardware overhead while preserving high-fidelity operation.

quant-ph↗

arXiv2026

System-Level Design of Scalable Fluxonium Quantum Processors with Double-Transmon Couplers

Fluxonium qubits combine long coherence times with strong anharmonicity, making them a promising platform for scalable superconducting quantum processors. Recent experiments have demonstrated high-fidelity operations in multi-qubit processors while suppressing stray qubit interactions using fluxonium-transmon-fluxonium (FTF) architectures. However, scaling such systems to larger arrays is constrained by a trade-off between achievable coupling strength, crosstalk suppression and qubit-qubit spacing required for wiring in a two-dimensional architecture. Multimode couplers, such as the double-transmon coupler (DTC), provide a promising pathway to overcome this limitation by enabling stronger interactions without compromising qubit spacing and isolation. Here, we develop a quantitative design framework for fluxonium-based quantum processors employing DTCs. Central to this work is a frequency-partitioned architecture that places qubit transitions, tunable-coupler excitations, and resonator modes in well-separated spectral regions. This structured allocation reduces parameter interdependence and enables the concurrent optimization of gate operations, readout, and qubit reset. By formulating device design as a multi-objective optimization problem under realistic experimental constraints and fabrication-induced disorder, we develop a tractable sequential workflow and determine a feasible parameter regime that simultaneously supports high-fidelity single- and two-qubit gates, fast qubit reset, and robust dispersive readout. These results establish a system-level architectural methodology that links circuit parameters to processor-level performance, and provide an experimentally actionable pathway toward scalable fluxonium quantum processors.

quant-ph↗

arXiv2026

Millikelvin digital-to-analog converter for superconducting quantum processors

Scaling superconducting quantum processors is increasingly constrained by the wiring, heat load, and calibration overhead associated with delivering high-resolution analog signals from room temperature to qubits at millikelvin temperature. Here we demonstrate a superconducting digital-to-analog converter (DAC) integrated with high-coherence fluxonium qubits in a multi-chip module architecture. The DACs generate persistent analog flux signals for tuning qubit parameters and are programmed deterministically using single-flux-quantum (SFQ) pulses, providing a digital interface compatible with established SFQ routing and demultiplexing technologies. Operating at millikelvin temperature, the DACs enable in-situ tuning of fluxonium qubits without measurable degradation of qubit coherence. The presented device provides a static control primitive for flux-tunable qubits, enabling parameter homogenization and eliminating the need for individual room-temperature DC bias lines. These results establish SFQ-programmable millikelvin DACs as a building block for digitally controlled superconducting quantum processors.

quant-ph↗

arXiv2026

Scalable Fluxonium Quantum Processors via Tunable-Coupler Architecture

Superconducting quantum processors have largely converged on transmon-based architectures, while alternative qubit modalities with intrinsic error protection have lacked a demonstrated path to scalable system integration. In particular, although tunable-coupler-mediated interactions have been validated for small fluxonium systems, it remains unclear whether such designs can be scaled to a multi-qubit lattice. Here, we establish a scalable fluxonium processor architecture based on a modular qubit-coupler unit cell engineered to suppress residual interactions and spectator errors in a many-qubit lattice. The system enables parallel single-qubit gate fidelities approaching 99.99% and two-qubit CZ gate fidelities around 99%. With an optimized gate duration of 32 ns, the best CZ gate fidelity reaches 99.9%. We further validate this architecture in a 22-qubit processor based on the same configuration, where parallel operations enable the deterministic generation of Greenberger-Horne-Zeilinger states involving up to 10 qubits. Together, these results demonstrate that the fluxonium-tunable-coupler unit cell composes without emergent interaction pathologies and establish fluxonium as a scalable superconducting qubit platform.

quant-ph↗

arXiv2026

Converting qubit relaxation into erasures with a single fluxonium

Qubits that experience predominantly erasure errors offer distinct advantages for fault-tolerant operation. Indeed, dual-rail encoded erasure qubits in superconducting cavities and transmons have demonstrated high-fidelity operations by converting physical-qubit relaxation into logical-qubit erasures, but this comes at the cost of increased hardware overhead and circuit complexity. Here, we address these limitations by realizing erasure conversion in a single fluxonium operated at zero flux, where the logical state is encoded in its 0-2 subspace. A single, carefully engineered resonator provides both mid-circuit erasure detection and end-of-line (EOL) logical measurement. Post-selection on non-erasure outcomes results in more than four-fold increase of the logical lifetime, from $193~μ$s to $869~μ$s. Finally, we characterize measurement-induced logical dephasing as a function of measurement power and frequency, and infer that each erasure check contributes a negligible error of $7.2\times 10^{-5}$. These results establish integer-fluxonium as a promising, resource-efficient platform for erasure-based error mitigation, without requiring additional hardware.

quant-ph↗

arXiv2025

Identify and Quantify Various Dissipation Mechanisms of Josephson Junction in Superconducting Circuits

Pinpointing the dissipation mechanisms and evaluating their impacts to the performance of Josephson junction (JJ) are crucial for its application in superconducting circuits. In this work, we demonstrate the junction-embedded resonator (JER) as a platform which enables us to identify and quantify various dissipation mechanisms of JJ. JER is constructed by embedding JJ in the middle of an open-circuit, 1/2 λ transmission-line resonator. When the 1st and 2nd harmonics of JER are excited, JJ experiences different boundary conditions, and is dominated by internal and external dissipations, respectively. We systematically study these 2 dissipation mechanisms of JJ by varying the JJ area and number. Our results unveil the completely different behaviors of these 2 dissipation mechanisms, and quantitatively characterize their contributions, shedding a light on the direction of JJ optimization in various applications.

quant-ph↗

arXiv2025

Mitigating state transition errors during readout with a synchronized flux pulse

State transitions during qubit measurements are extremely detrimental to quantum tasks that rely on repeated measurements, such as quantum error correction. These state transitions can occur when excessive measurement power leads to qubit excitations outside its computational space. Alternatively, the qubit state can decay rapidly when the measurement protocol inadvertently couples the qubit to lossy modes such as two-level systems (TLSs). We experimentally verify the impact of these TLSs in qubit readout by measuring the transition errors at different qubit flux bias. Because such state transitions during measurements are often localized in frequency space, we demonstrate the ability to avoid them during a fluxonium readout by exploiting the qubit's flux-tunability. By synchronizing the flux bias with the readout photon dynamics, we obtain an optimal readout fidelity of 99 % (98.4 %) in 1 us (0.5 us) integration time. Our work advances the understanding of state transitions in superconducting circuit measurements and demonstrates the potential of fluxonium qubits to achieve fast high-fidelity readout.

quant-ph↗

arXiv2025

High coherence fluxonium manufactured with a wafer-scale uniformity process

Fluxonium qubits are recognized for their high coherence times and high operation fidelities, attributed to their unique design incorporating a superinductor, which is typically implemented using an array of over 100 Josephson junctions. However, this complexity poses significant fabrication challenges, particularly in achieving high yield and junction uniformity with traditional methods. Here, we introduce an overlap process for Josephson junction fabrication that achieves nearly 100% yield and maintains uniformity across a 2-inch wafer with less than 5% variation for the phase slip junction and less than 2% for the entire junction array. We use a compact junction array design that achieves state-of-the-art dielectric loss tangents and flux noise levels, as confirmed by multiple devices. This enables fluxonium qubits to reach energy relaxation times exceeding 1 millisecond at the flux frustration point. This work paves the way for scalable high coherence fluxonium processors using CMOS-compatible processes, marking a significant step towards practical quantum computing.

quant-ph↗

arXiv2025

The effects of disorder in superconducting materials on qubit coherence

Introducing disorderness in the superconducting materials has been considered promising to enhance the electromagnetic impedance and realize noise-resilient superconducting qubits. Despite a number of pioneering implementations, the understanding of the correlation between the material disorderness and the qubit coherence is still developing. Here, we demonstrate a systematic characterization of fluxonium qubits with the superinductors made from titanium-aluminum-nitride with varied disorderness. From qubit noise spectroscopy, the flux noise and the dielectric loss are extracted as a measure of the coherence properties. Our results reveal that the $1/f$ flux noise dominates the qubit decoherence around the flux-frustration point, strongly correlated with the material disorderness; while the dielectric loss remains low under a wide range of material properties. From the flux-noise amplitudes, the areal density ($σ$) of the phenomenological spin defects and material disorderness are found to be approximately correlated by $σ\propto ρ_{xx}^3$, or effectively $(k_F l)^{-3}$. This work has provided new insights on the origin of decoherence channels within superconductors, and could serve as a useful guideline for material design and optimization.

quant-ph↗

arXiv2024

Efficient initialization of fluxonium qubits based on auxiliary energy levels

Fast and high-fidelity qubit initialization is crucial for low-frequency qubits such as fluxonium, and in applications of many quantum algorithms and quantum error correction codes. In a circuit quantum electrodynamics system, the initialization is typically achieved by transferring the state between the qubit and a short-lived cavity through microwave driving, also known as the sideband cooling process in atomic system. Constrained by the selection rules from the parity symmetry of the wavefunctions, the sideband transitions are only enabled by multi-photon processes which requires multi-tone or strong driving. Leveraging the flux-tunability of fluxonium, we circumvent this limitation by breaking flux symmetry to enable an interaction between a non-computational qubit transition and the cavity excitation. With single-tone sideband driving, we realize qubit initialization with a fidelity exceeding 99% within a duration of 300 ns, robust against the variation of control parameters. Furthermore, we show that our initialization scheme has a built-in benefit in simultaneously removing the second-excited state population of the qubit, and can be easily incorporated into a large-scale fluxonium processor.

quant-ph↗

arXiv2023

Native approach to controlled-Z gates in inductively coupled fluxonium qubits

The fluxonium qubits have emerged as a promising platform for gate-based quantum information processing. However, their extraordinary protection against charge fluctuations comes at a cost: when coupled capacitively, the qubit-qubit interactions are restricted to XX-interactions. Consequently, effective XX- or XZ-interactions are only constructed either by temporarily populating higher-energy states, or by exploiting perturbative effects under microwave driving. Instead, we propose and demonstrate an inductive coupling scheme, which offers a wide selection of native qubit-qubit interactions for fluxonium. In particular, we leverage a built-in, flux-controlled ZZ-interaction to perform qubit entanglement. To combat the increased flux-noise-induced dephasing away from the flux-insensitive position, we use a continuous version of the dynamical decoupling scheme to perform noise filtering. Combining these, we demonstrate a 20 ns controlled-Z (CZ) gate with a mean fidelity of 99.53%. More than confirming the efficacy of our gate scheme, this high-fidelity result also reveals a promising but rarely explored parameter space uniquely suitable for gate operations between fluxonium qubits.

quant-ph↗

arXiv2023

Characterization of loss mechanisms in a fluxonium qubit

Using a fluxonium qubit with in situ tunability of its Josephson energy, we characterize its energy relaxation at different flux biases as well as different Josephson energy values. The relaxation rate at qubit energy values, ranging more than one order of magnitude around the thermal energy $k_B T$, can be quantitatively explained by a combination of dielectric loss and $1/f$ flux noise with a crossover point. The amplitude of the $1/f$ flux noise is consistent with that extracted from the qubit dephasing measurements at the flux sensitive points. In the dielectric loss dominant regime, the loss is consistent with that arises from the electric dipole interaction with two-level-system (TLS) defects. In particular, as increasing Josephson energy thus decreasing qubit frequency at the flux insensitive spot, we find that the qubit exhibits increasingly weaker coupling to TLS defects thus desirable for high-fidelity quantum operations.

quant-ph↗

arXiv2022

Titanium Nitride Film on Sapphire Substrate with Low Dielectric Loss for Superconducting Qubits

Dielectric loss is one of the major decoherence sources of superconducting qubits. Contemporary high-coherence superconducting qubits are formed by material systems mostly consisting of superconducting films on substrate with low dielectric loss, where the loss mainly originates from the surfaces and interfaces. Among the multiple candidates for material systems, a combination of titanium nitride (TiN) film and sapphire substrate has good potential because of its chemical stability against oxidization, and high quality at interfaces. In this work, we report a TiN film deposited onto sapphire substrate achieving low dielectric loss at the material interface. Through the systematic characterizations of a series of transmon qubits fabricated with identical batches of TiN base layers, but different geometries of qubit shunting capacitors with various participation ratios of the material interface, we quantitatively extract the loss tangent value at the substrate-metal interface smaller than $8.9 \times 10^{-4}$ in 1-nm disordered layer. By optimizing the interface participation ratio of the transmon qubit, we reproducibly achieve qubit lifetimes of up to 300 $μ$s and quality factors approaching 8 million. We demonstrate that TiN film on sapphire substrate is an ideal material system for high-coherence superconducting qubits. Our analyses further suggest that the interface dielectric loss around the Josephson junction part of the circuit could be the dominant limitation of lifetimes for state-of-the-art transmon qubits.

quant-ph↗

arXiv2021

Fluxonium: an alternative qubit platform for high-fidelity operations

Superconducting qubits provide a promising path toward building large-scale quantum computers. The simple and robust transmon qubit has been the leading platform, achieving multiple milestones. However, fault-tolerant quantum computing calls for qubit operations at error rates significantly lower than those exhibited in the state of the art. Consequently, alternative superconducting qubits with better error protection have attracted increasing interest. Among them, fluxonium is a particularly promising candidate, featuring large anharmonicity and long coherence times. Here, we engineer a fluxonium-based quantum processor that integrates high qubit-coherence, fast frequency-tunability, and individual-qubit addressability for reset, readout, and gates. With simple and fast gate schemes, we achieve an average single-qubit gate fidelity of 99.97% and a two-qubit gate fidelity of up to 99.72%. This performance is comparable to the highest values reported in the literature of superconducting circuits. Thus our work, for the first time within the realm of superconducting qubits, reveals an approach toward fault-tolerant quantum computing that is alternative and competitive to the transmon system.

quant-ph↗

arXiv2021

Efficient and Low-Backaction Quantum Measurement Using a Chip-Scale Detector

Superconducting qubits are a leading platform for scalable quantum computing and quantum error correction. One feature of this platform is the ability to perform projective measurements orders of magnitude more quickly than qubit decoherence times. Such measurements are enabled by the use of quantum-limited parametric amplifiers in conjunction with ferrite circulators - magnetic devices which provide isolation from noise and decoherence due to amplifier backaction. Because these non-reciprocal elements have limited performance and are not easily integrated on-chip, it has been a longstanding goal to replace them with a scalable alternative. Here, we demonstrate a solution to this problem by using a superconducting switch to control the coupling between a qubit and amplifier. Doing so, we measure a transmon qubit using a single, chip-scale device to provide both parametric amplification and isolation from the bulk of amplifier backaction. This measurement is also fast, high fidelity, and has 70% efficiency, comparable to the best that has been reported in any superconducting qubit measurement. As such, this work constitutes a high-quality platform for the scalable measurement of superconducting qubits.

quant-ph↗

arXiv2020

Nonclassical energy squeezing of a macroscopic mechanical oscillator

Optomechanics and electromechanics have made it possible to prepare macroscopic mechanical oscillators in their quantum ground states, in quadrature squeezed states, and in entangled states of motion. In addition to coaxing ever larger and more tangible objects into a regime of quantum behavior, this new capability has encouraged ideas of using mechanical oscillators in the processing and communication of quantum information and as precision force sensors operating beyond the standard quantum limit. But the effectively linear interaction between motion and light or electricity precludes access to the broader class of quantum states of motion, such as cat states or energy squeezed states. Indeed, early optomechanical proposals noted the possibility to escape this restriction by creating strong quadratic coupling of motion to light. Although there have been experimental demonstrations of quadratically coupled optomechanical systems, these have not yet accessed nonclassical states of motion. Here we create nonclassical states by quadratically coupling motion to the energy levels of a Cooper-pair box (CPB) qubit. By monitoring the qubit's transition frequency, we detect the oscillator's phonon distribution rather than its position. Through microwave frequency drives that change both the state of the oscillator and qubit, we then dissipatively stabilize the oscillator in a state with a large mean phonon number of 43 and sub-Poissonian number fluctuations of approximately 3. In this energy squeezed state we observe a striking feature of the quadratic coupling: the recoil of the mechanical oscillator caused by qubit transitions, closely analogous to the vibronic transitions in molecules.

quant-ph↗

arXiv2018

Phonon number sensitive electromechanics

We use the strong intrinsic non-linearity of a microwave superconducting qubit with a 4 GHz transition frequency to directly detect and control the energy of a micro-mechanical oscillator vibrating at 25 MHz. The qubit and the oscillator are coupled electrostatically at a rate of approximately $2π\times$22 MHz. In this far off-resonant regime, the qubit frequency is shifted by 0.52 MHz per oscillator phonon, or about 14 % of the 3.7 MHz qubit linewidth. The qubit behaves as a vibrational energy detector and from its lineshape we extract the phonon number distribution of the oscillator. We manipulate this distribution by driving number state sensitive sideband transitions and creating profoundly non-thermal states. Finally, by driving the lower frequency sideband transition, we cool the oscillator and increase its ground state population up to 0.48$\pm$0.13, close to a factor of 8 above its value at thermal equilibrium. These results demonstrate a new class of electromechanics experiments that are a promising strategy for quantum non-demolition measurements and non-classical state preparation.

cond-mat.mes-hall↗