arXiv subjects

Xu Yi

Publications and source records attributed to Xu Yi.

At least 19 recordsLinked to original sources

arXiv2026

Heterogeneously Integrated Squeezed-Light Generation and Detection on a Single Photonic Chip

Squeezed light underpins quantum-enhanced sensing and continuous-variable quantum information processing, and integrated photonics offers a route to producing it at scale. Universal to these applications are squeezed-light generation and measurement. Importantly, quantum measurements serve not only as readout but also as active operations in quantum-state evolution. However, integrating squeezed-light generation and photodetection on the same photonic chip has remained challenging because they impose fundamentally conflicting material requirements: low optical loss to preserve quantum correlations, but efficient photon absorption for photodetection. Here, we demonstrate squeezed-light generation, routing, and balanced homodyne detection integrated on a single photonic chip through heterogeneous integration. A two-mode squeezed quantum microcomb comprising 34 quantum modes is measured with approximately 3 dB squeezing. Our work establishes a scalable architecture for fully integrated squeezed-light quantum photonic systems, unifying quantum-state generation, processing, and detection on a single chip.

quant-ph↗

arXiv2026

Low-loss phononic integrated circuits based on a silicon nitride-lithium niobate platform

Microwave-frequency acoustic waves in solids have emerged as a versatile platform for both classical and quantum applications. While phononic integrated devices and circuits are being developed on various material platforms, an ideal phononic integrated circuit (PnIC) platform should simultaneously support low-loss waveguide structures, high-quality-factor resonators, high-performance modulators, and efficient electromechanical transducers. Here, we establish a low-loss gigahertz-frequency PnIC platform based on patterned thin-film silicon nitride (SiN) on lithium niobate (LN) substrate. We develop low-loss PnIC building blocks including waveguides, directional couplers, and high-quality-factor (high-Q) ring resonators. As an application, we demonstrate a 1-GHz phononic oscillator based on a ring resonator, reaching a low phase noise of -159.0 dBc/Hz at a 100-kHz offset frequency. Our low-loss PnICs could meet the requirements in microwave acoustics, quantum phononics, and integrated hybrid systems combining phonons, photons, superconducting qubits, and solid-state defects.

physics.app-ph↗

arXiv2025

Universal loss and gain characterization inside photonic integrated circuits

Integrated photonics has undergone tremendous development in the past few decades, transforming many fields of study in science and technology. Loss and gain are two fundamental elements in photonic circuits and have direct impacts on nearly all key performance metrics. Surprisingly, the tools to characterize the optical loss and gain inside photonic integrated circuits (PICs) are very limited. This is because, unlike free-space or fiber optics, integrated circuits cannot be nondestructively disassembled. Here, we report a universal method to see inside the photonic integrated circuits and measure loss and gain on the component level nondestructively. The method leverages nonlinear optical devices as optical power discriminators to retrieve the loss and gain information inside the PICs. Our method has a precision better than 0.1 dB, and can characterize the loss of individual fiber-chip coupling facet and general unknown devices under test. As a demonstration of applications, we measured the true on-chip quantum efficiency of a quantum PIC consisting of heterogeneously integrated balanced photodiodes, a critical building block for integrated quantum technology. Our method can be implemented on different photonic platforms, and can be used to understand gain and loss in complex photonic circuits, which is essential to optimize circuit design and to create large-scale systems with predictable, reproducible performance.

physics.optics↗

arXiv2025

Photonic chip-based optical frequency division with PZT-integrated soliton microcombs

Optical frequency division (OFD) produces low-noise microwave and millimeter-wave signals by transferring the exceptional stability of optical references to electronic frequency domains. Recent developments in integrated optical references and soliton microcombs have paved the way for miniaturizing OFD oscillators to chip scale. Critical to this realization is a rapid tunable frequency comb that is stabilized to the optical references, thereby coherently linking optical and electronic frequencies. In this work, we advance the on-chip OFD technology using an integrated high-speed PZT stress-optic actuator on the SiN soliton microcomb resonator. The integrated PZT actuator tunes the resonance frequency of the soliton-generating microresonator with a bandwidth exceeding 10s MHz and independently adjusts the soliton repetition rate without perturbing the frequency comb offset. Optical frequency division and low-noise mmWave generation are demonstrated by feedback control of the soliton repetition rate through the integrated PZT-actuator, and the soliton microcomb is stabilized to a pair of reference lasers that are locked to an integrated 4-meter SiN coil reference cavity. Our approach provides a fast, versatile and integrated control mechanism for OFD oscillators and their applications in advanced communications, sensing, and precise timing.

physics.optics↗

arXiv2025

Integrated Architecture for the Automated Generation and Coil Stabilization of a PZT-Enabled Microcomb

Silicon nitride Dissipative Kerr Soliton (DKS) microcombs have emerged as a future solution to bring metrological optical frequency comb capabilities into a photonic integrated platform with mass-scale fabrication benefits. Precision applications demand low comb line phase noise as well as high repetition rate stability, but current approaches to achieve this involve complex architectures, multiple lasers, and high-power components, which are challenging to integrate to the chip scale. To achieve this goal, new architectures are needed to simplify the comb generation, actuation, and pump laser requirements, while enabling chip-integrated solutions. Here we demonstrate a greatly simplified stabilized DKS comb architecture with a single laser and a single point electronic control of both the microcomb generation and its stabilization to a coil-resonator reference. The silicon nitride microcomb is integrated with a low power, broadband PZT actuator that is driven by a simple electronic control sequence that generates a soliton and stabilizes it to the 16-meter silicon nitride coil resonator. PZT-enabled control brings flexibility and simplicity to the soliton generation and stabilization using a single CW pump laser, resulting in significantly reduced electronic and optical infrastructure. We demonstrate coil-resonator locking which suppresses the 1 kHz frequency noise by 40 dB over the 35 nm wide comb spectrum, with comb line linewidths as low as 66 Hz and 108 GHz soliton repetition rate phase noise equivalent to -118 dBc/Hz when divided down to 10 GHz. The low power PZT actuator consumes nW bias power and the coil resonator allows flexible dual locking using arbitrary comb lines. These results show a clear path towards full chip integration of stabilized soliton microcombs with simplicity and versatility absent in other schemes.

physics.optics↗

arXiv2025

Meltdown: Bridging the Perception Gap in Sustainable Food Behaviors Through Immersive VR

Climate change education often struggles to bridge the perception gap between everyday actions and their long-term environmental consequences. In response, we developed Meltdown, an immersive virtual reality (VR) escape room that simulates a grocery shopping and food waste management experience to educate university students in Singapore about sustainable consumption. The game emphasizes sustainable food choices and disposal practices, combining interactive elements and narrative feedback to promote behavioral change. Through a user study with 36 university students, we observed statistically significant improvements in participants objective knowledge, perceived confidence, and intention to adopt sustainable behaviors. Our results suggest that experiential VR environments can enhance climate education by making abstract environmental concepts more immediate and personally relevant.

cs.CY↗

arXiv2024

Kerr optical frequency division with integrated photonics for stable microwave and mmWave generation

Optical frequency division (OFD) has revolutionized microwave and mmWave generation and set spectral purity records owing to its unique capability to transfer high fractional stability from optical to electronic frequencies. Recently, rapid developments in integrated optical reference cavities and microresonator-based optical frequency combs (microcombs) have created a path to transform OFD technology to chip scale. Here, we demonstrate an ultra-low phase noise mmWave oscillator by leveraging integrated photonic components and Kerr optical frequency division. The oscillator derives its stability from an integrated CMOS-compatible SiN coil cavity, and the optical frequency division is achieved spontaneously through Kerr interaction between the injected reference lasers and soliton microcombs in the integrated SiN microresonator. Besides achieving record-low phase noise for integrated mmWave oscillators, our demonstration greatly simplifies the implementation of integrated OFD oscillators and could be useful in applications of Radar, spectroscopy, and astronomy.

physics.optics↗

arXiv2023

Integrated optical frequency division for stable microwave and mmWave generation

The generation of ultra-low noise microwave and mmWave in miniaturized, chip-based platforms can transform communication, radar, and sensing systems. Optical frequency division that leverages optical references and optical frequency combs has emerged as a powerful technique to generate microwaves with superior spectral purity than any other approaches. We demonstrate a miniaturized optical frequency division system that can potentially transfer the approach to a CMOS-compatible integrated photonic platform. Phase stability is provided by a large-mode-volume, planar-waveguide-based optical reference coil cavity and is divided down from optical to mmWave frequency by using soliton microcombs generated in a waveguide-coupled microresonator. Besides achieving record-low phase noise for integrated photonic microwave/mmWave oscillators, these devices can be heterogeneously integrated with semiconductor lasers, amplifiers, and photodiodes, holding the potential of large-volume, low-cost manufacturing for fundamental and mass-market applications.

physics.optics↗

arXiv2022

When Kinematics Dominates Mechanics: Locally Volume-Preserving Primitives for Model Reduction in Finite Elasticity

A new, and extremely fast, computational modeling paradigm is introduced here for specific finite elasticity problems that arise in the context of soft robotics. Whereas continuum mechanics is a very classical area of study, and significant effort has been devoted to the development of intricate constitutive models for finite elasticity, we show that in the kinds of large-strain mechanics problems arising in soft robotics, many of the parameters in constitutive models are irrelevant. For the most part, the isochoric (locally volume-preserving) constraint dominates behavior, and this can be built into closed-form kinematic deformation fields before even considering other aspects of constitutive modeling. We therefore focus on developing and applying primitive deformations that each observe this constraint. It is shown that by composing a wide enough variety of such deformations that the most common behaviors observed in soft robots can be replicated. Case studies include an inflatable rubber chamber, a slender rubber rod, and a rubber block subjected to different boundary conditions. We show that this method is at least 50 times faster than the ABAQUS implementation of the finite element method (FEM). Physical experiments and measurements show that both our method and ABAQUS have approximately 10% error relative to experimentally measured displacements, as well as to each other. Our method provides a real-time alternative to FEM, and captures essential degrees of freedom for use in feedback control systems.

cs.RO↗

arXiv2021

A squeezed quantum microcomb on a chip

The optical microresonator-based frequency comb (microcomb) provides a versatile platform for nonlinear physics studies and has wide applications ranging from metrology to spectroscopy. Deterministic quantum regime is an unexplored aspect of microcombs, in which unconditional entanglements among hundreds of equidistant frequency modes can serve as critical ingredients to scalable universal quantum computing and quantum networking. Here, we demonstrate a deterministic quantum microcomb in a silica microresonator on a silicon chip. 40 continuous-variable quantum modes, in the form of 20 simultaneously two-mode squeezed comb pairs, are observed within 1 THz optical span at telecommunication wavelengths. A maximum raw squeezing of 1.6 dB is attained. A high-resolution spectroscopy measurement is developed to characterize the frequency equidistance of quantum microcombs. Our demonstration offers the possibility to leverage deterministically generated, frequency multiplexed quantum states and integrated photonics to open up new avenues in fields of spectroscopy, quantum metrology, and scalable quantum information processing.

physics.optics↗

arXiv2020

Towards high-power, high-coherence, integrated photonic mmWave platform with microcavity solitons

Millimeter-wave (mmWave) technology continues to draw large interest due to its broad applications in wireless communications, radar, and spectroscopy. Compared to pure electronic solutions, photonic-based mmWave generation provides wide bandwidth, low power dissipation, and remoting through low-loss fiber. However, at high frequencies, two major challenges exist for the photonic system: the power roll-off of the photodiode, and the large signal linewidth derived directly from the lasers. Here, we demonstrate a new photonic mmWave platform by combining integrated microresonator solitons and high-speed photodiodes to address the challenges in both power and coherence. The solitons, being inherently mode-locked, are measured to provide 5.8 dB additional gain through constructive interference among mmWave beatnotes, and the absolute mmWave power approaches the theoretical limit of conventional heterodyne detection at 100 GHz. In our free-running system, the soliton is capable of reducing the mmWave linewidth by two orders of magnitude from that of the pump laser. Our work leverages microresonator solitons and high-speed modified uni-traveling carrier photodiodes to provide a viable path to chip-scale high-power, low-noise, high-frequency sources for mmWave applications.

physics.app-ph↗

arXiv2019

A novel computational framework for the expected number of real roots of stochastic functions on a given interval

We propose a new computational framework for the expected number of real roots of a stochastic function on a given interval. The classical Kac-Rice formula requires the joint density of the function and its derivative, which is often intractable. Our approach avoids this requirement entirely by introducing a cumulative expectation function. Through analysis of its absolute continuity and differential structure, we derive two complementary computational schemes: one expresses the expectation as a derivative of a variable-domain integral under weak conditions; the other yields an explicit integral representation without joint densities or variable-domain differentiation. We illustrate the method in detail for linear stochastic functions, obtaining explicit formulas for Gaussian and uniform distributions, together with several new analytical results. The framework substantially broadens the scope of problems amenable to rigorous analysis and provides a powerful tool for applications in stochastic analysis and beyond.

math.PR↗

arXiv2018

Kerr-microresonator solitons from a chirped background

We demonstrate protected single-soliton formation and operation in a Kerr microresonator using a phase-modulated pump laser. Phase modulation gives rise to spatially varying effective loss and detuning parameters, which in turn lead to an operation regime in which multi-soliton degeneracy is lifted and a single soliton is the only observable behavior. Direct excitation of single solitons is indicated by observed reversal of the characteristic 'soliton step.' Phase modulation also enables precise control of the soliton pulse train's properties, and measured dynamics agree closely with simulations. We show that the technique can be extended to high repetition-frequency Kerr solitons through subharmonic phase modulation. These results facilitate straightforward generation and control of Kerr-soliton microcombs for integrated photonics systems.

physics.optics↗

arXiv2018

Imaging soliton dynamics in optical microcavities

Solitons are self-sustained wavepackets that occur in many physical systems. Their recent demonstration in optical microresonators has provided a new platform for study of nonlinear optical physics with practical implications for miniaturization of time standards, spectroscopy tools and frequency metrology systems. However, despite its importance to understanding of soliton physics as well as development of new applications, imaging the rich dynamical behaviour of solitons in microcavities has not been possible. These phenomena require a difficult combination of high-temporal-resolution and long-record-length in order to capture the evolving trajectories of closely-spaced microcavity solitons. Here, an imaging method is demonstrated that visualizes soliton motion with sub-picosecond resolution over arbitrary time spans. A wide range of complex soliton transient behaviors are characterized in the temporal or spectral domain, including soliton formation, collisions, spectral breathing and soliton decay. This method can serve as a universal visualization tool for understanding complex soliton physics in microcavities.

physics.optics↗

arXiv2018

Searching for Exoplanets Using a Microresonator Astrocomb

Detection of weak radial velocity shifts of host stars induced by orbiting planets is an important technique for discovering and characterizing planets beyond our solar system. Optical frequency combs enable calibration of stellar radial velocity shifts at levels required for detection of Earth analogs. A new chip-based device, the Kerr soliton microcomb, has properties ideal for ubiquitous application outside the lab and even in future space-borne instruments. Moreover, microcomb spectra are ideally suited for astronomical spectrograph calibration and eliminate filtering steps required by conventional mode-locked-laser frequency combs. Here, for the calibration of astronomical spectrographs, we demonstrate an atomic/molecular line-referenced, near-infrared soliton microcomb. Efforts to search for the known exoplanet HD 187123b were conducted at the Keck-II telescope as a first in-the-field demonstration of microcombs.

physics.optics↗

arXiv2017

Micro-resonator soliton generated directly with a diode laser

An external-cavity diode laser is reported with ultralow noise, high power coupled to a fiber, and fast tunability. These characteristics enable the generation of an optical frequency comb in a silica micro-resonator with a single-soliton state. Neither an optical modulator nor an amplifier was used in the experiment. This demonstration greatly simplifies the soliton generation setup and represents a significant step forward to a fully integrated soliton comb system.

physics.optics↗

arXiv2017

Towards visible soliton microcomb generation

Frequency combs have applications that extend from the ultra-violet into the mid-infrared bands. Microcombs, a miniature and often semiconductor-chip-based device, can potentially access most of these applications, but are currently more limited in spectral reach. Here, we demonstrate mode-locked silica microcombs with emission near the edge of the visible spectrum. By using both geometrical and mode-hybridization dispersion control, devices are engineered for soliton generation while also maintaining optical $Q$ factors as high as 80 million. Electronics-bandwidth-compatible (20 GHz) soliton mode locking is achieved with low pumping powers (parametric oscillation threshold powers as low as 5.4 mW). These are the shortest wavelength soliton microcombs demonstrated to date and could be used in miniature optical clocks. The results should also extend to visible and potentially ultra-violet bands.

physics.optics↗

arXiv2017

Bridging ultra-high-Q devices and photonic circuits

Optical microcavities are essential in numerous technologies and scientific disciplines. However, their application in many areas relies exclusively upon discrete microcavities in order to satisfy challenging combinations of ultra-low-loss performance (high cavity-Q-factor) and cavity design requirements. Indeed, finding a microfabrication bridge connecting ultra-high-Q device functions with micro and nanophotonic circuits has been a long-term priority of the microcavity field. Here, an integrated ridge resonator having a record Q factor over 200 million is presented. Its ultra-low-loss and flexible cavity design brings performance that has been the exclusive domain of discrete silica and crytalline microcavity devices to integrated systems. Two distinctly different devices are demonstrated: soliton sources with electronic repetition rates and high-coherence Brillouin lasers. This multi-device capability and performance from a single integrated cavity platform represents a critical advance for future nanophotonic circuits and systems.

physics.optics↗