arXiv subjects

Xuehui Wang

Publications and source records attributed to Xuehui Wang.

At least 37 records · Page 2Linked to original sources

arXiv2024

Beamforming Design for IRS-and-UAV-Aided Two-Way Amplify-and-Forward Relay Networks in Maritime IoT

In this paper, an intelligent reflecting surface (IRS)-and-unmanned aerial vehicle (UAV)-assisted two-way amplify-and-forward (AF) relay network in maritime Internet of Things (IoT) is proposed, where ship1 ($\text{S}_1$) and ship2 ($\text{S}_2$) can be viewed as data collecting centers. To enhance the message exchange rate between $\text{S}_1$ and $\text{S}_2$, a problem of maximizing minimum rate is cast, where the variables, namely AF relay beamforming matrix and IRS phase shifts of two time slots, need to be optimized. To achieve a maximum rate, a low-complexity alternately iterative (AI) scheme based on zero forcing and successive convex approximation (LC-ZF-SCA) algorithm is presented. To obtain a significant rate enhancement, a high-performance AI method based on one step, semidefinite programming and penalty SCA (ONS-SDP-PSCA) is proposed. Simulation results show that by the proposed LC-ZF-SCA and ONS-SDP-PSCA methods, the rate of the IRS-and-UAV-assisted AF relay network surpass those of with random phase and only AF relay networks. Moreover, ONS-SDP-PSCA perform better than LC-ZF-SCA in aspect of rate.

cs.IT↗

arXiv2024

Multi-stream Transmission for Directional Modulation Network via Distributed Multi-UAV-aided Multi-active-IRS

Active intelligent reflecting surface (IRS) is a revolutionary technique for the future 6G networks. The conventional far-field single-IRS-aided directional modulation(DM) networks have only one (no direct path) or two (existing direct path) degrees of freedom (DoFs). This means that there are only one or two streams transmitted simultaneously from base station to user and will seriously limit its rate gain achieved by IRS. How to create multiple DoFs more than two for DM? In this paper, single large-scale IRS is divided to multiple small IRSs and a novel multi-IRS-aided multi-stream DM network is proposed to achieve a point-to-point multi-stream transmission by creating $K$ ($\geq3$) DoFs, where multiple small IRSs are placed distributively via multiple unmanned aerial vehicles (UAVs). The null-space projection, zero-forcing (ZF) and phase alignment are adopted to design the transmit beamforming vector, receive beamforming vector and phase shift matrix (PSM), respectively, called NSP-ZF-PA. Here, $K$ PSMs and their corresponding beamforming vectors are independently optimized. The weighted minimum mean-square error (WMMSE) algorithm is involved in alternating iteration for the optimization variables by introducing the power constraint on IRS, named WMMSE-PC, where the majorization-minimization (MM) algorithm is used to solve the total PSM. To achieve a lower computational complexity, a maximum trace method, called Max-TR-SVD, is proposed by optimize the PSM of all IRSs. Numerical simulation results has shown that the proposed NSP-ZF-PA performs much better than Max-TR-SVD in terms of rate. In particular, the rate of NSP-ZF-PA with sixteen small IRSs is about five times that of NSP-ZF-PA with combining all small IRSs as a single large IRS. Thus, a dramatic rate enhancement may be achieved by multiple distributed IRSs.

eess.SP↗

arXiv2024

Tendency-driven Mutual Exclusivity for Weakly Supervised Incremental Semantic Segmentation

Weakly Incremental Learning for Semantic Segmentation (WILSS) leverages a pre-trained segmentation model to segment new classes using cost-effective and readily available image-level labels. A prevailing way to solve WILSS is the generation of seed areas for each new class, serving as a form of pixel-level supervision. However, a scenario usually arises where a pixel is concurrently predicted as an old class by the pre-trained segmentation model and a new class by the seed areas. Such a scenario becomes particularly problematic in WILSS, as the lack of pixel-level annotations on new classes makes it intractable to ascertain whether the pixel pertains to the new class or not. To surmount this issue, we propose an innovative, tendency-driven relationship of mutual exclusivity, meticulously tailored to govern the behavior of the seed areas and the predictions generated by the pre-trained segmentation model. This relationship stipulates that predictions for the new and old classes must not conflict whilst prioritizing the preservation of predictions for the old classes, which not only addresses the conflicting prediction issue but also effectively mitigates the inherent challenge of incremental learning - catastrophic forgetting. Furthermore, under the auspices of this tendency-driven mutual exclusivity relationship, we generate pseudo masks for the new classes, allowing for concurrent execution with model parameter updating via the resolution of a bi-level optimization problem. Extensive experiments substantiate the effectiveness of our framework, resulting in the establishment of new benchmarks and paving the way for further research in this field.

cs.CV↗

arXiv2024

Appeal: Allow Mislabeled Samples the Chance to be Rectified in Partial Label Learning

In partial label learning (PLL), each instance is associated with a set of candidate labels among which only one is ground-truth. The majority of the existing works focuses on constructing robust classifiers to estimate the labeling confidence of candidate labels in order to identify the correct one. However, these methods usually struggle to identify and rectify mislabeled samples. To help these mislabeled samples "appeal" for themselves and help existing PLL methods identify and rectify mislabeled samples, in this paper, we propose the first appeal-based PLL framework. Specifically, we introduce a novel partner classifier and instantiate it predicated on the implicit fact that non-candidate labels of a sample should not be assigned to it, which is inherently accurate and has not been fully investigated in PLL. Furthermore, a novel collaborative term is formulated to link the base classifier and the partner one. During each stage of mutual supervision, both classifiers will blur each other's predictions through a blurring mechanism to prevent overconfidence in a specific label. Extensive experiments demonstrate that the appeal and disambiguation ability of several well-established stand-alone and deep-learning based PLL approaches can be significantly improved by coupling with this learning paradigm.

cs.LG↗

arXiv2024

High-performance Power Allocation Strategies for Active IRS-aided Wireless Network

Due to its intrinsic ability to combat the double fading effect, the active intelligent reflective surface (IRS) becomes popular. The main feature of active IRS must be supplied by power, and the problem of how to allocate the total power between base station (BS) and IRS to fully explore the rate gain achieved by power allocation (PA) to remove the rate gap between existing PA strategies and optimal exhaustive search (ES) arises naturally. First, the signal-to-noise ratio (SNR) expression is derived to be a function of PA factor beta [0, 1]. Then, to improve the rate performance of the conventional gradient ascent (GA), an equal-spacing-multiple-point-initialization GA (ESMPI-GA) method is proposed. Due to its slow linear convergence from iterative GA, the proposed ESMPI-GA is high-complexity. Eventually, to reduce this high complexity, a low-complexity closed-form PA method with third-order Taylor expansion (TTE) centered at point beta0 = 0.5 is proposed. Simulation results show that the proposed ESMPI-GA and TTE obviously outperform existing methods like equal PA.

eess.SP↗

arXiv2023

Two Efficient Beamforming Methods for Hybrid IRS-aided AF Relay Wireless Networks

Due to the double fading effect caused by conventional passive intelligent reflecting surface (IRS), the signal via the reflection link is weak. To enhance the received signal, active elements with the ability to amplify the reflected signal are introduced to the passive IRS forming hybrid IRS. In this paper, we propose a hybrid IRS-aided amplify-and-forward (AF) relay wireless network, where an optimization problem is formulated, which is subject to the constraints of transmit power budgets at the source/AF relay/hybrid IRS and that of unit modulus for passive IRS elements. By alternately designing the beamforming matrix at AF relay and the reflecting coefficient matrices at IRS, signal-to-noise ratio can be maximized. To achieve high rate performance and extend the coverage range, a high-performance method based on semidefinite relaxation and fractional programming (HP-SDR-FP) algorithm is presented. Due to its extremely high complexity, a low-complexity method based on whitening filter, general power iterative and generalized Rayleigh-Ritz (WF-GPI-GRR) is proposed, which is different from HP-SDR-FP method. It is assumed that the amplifying coefficient of each active IRS element is equal, and the corresponding analytical solution of the amplifying coefficient can be obtained according to the transmit powers at AF relay and hybrid IRS. Simulation results show that the proposed two methods can greatly improve the rate performance compared to the existing networks, such as the passive IRS-aided AF relay and only AF relay network. In particular, a 50.0% rate gain over the existing networks is approximately achieved in the high power budget region of hybrid IRS. Moreover, it is verified that the proposed HP-SDR-FP method perform better than WF-GPI-GRR method in terms of rate performance.

eess.SP↗

arXiv2023

Beamforming Design for Hybrid IRS-aided AF Relay Wireless Networks

In this paper, a hybrid IRS-aided amplify-and-forward (AF) relay wireless network is put forward, where the hybrid IRS is made up of passive and active elements. For maximum signal-to-noise ratio (SNR), a low-complexity method based on successive convex approximation and fractional programming (LC-SCA-FP) is proposed to jointly optimize the beamforming matrix at AF relay and the reflecting coefficient matrices at IRS. Simulation results verify that the rate achieved by the proposed LC-SCA-FP method surpass those of the benchmark schemes, namely the passive IRS-aided AF relay and only AF relay network.

cs.IT↗

arXiv2023

SVCNet: Scribble-based Video Colorization Network with Temporal Aggregation

In this paper, we propose a scribble-based video colorization network with temporal aggregation called SVCNet. It can colorize monochrome videos based on different user-given color scribbles. It addresses three common issues in the scribble-based video colorization area: colorization vividness, temporal consistency, and color bleeding. To improve the colorization quality and strengthen the temporal consistency, we adopt two sequential sub-networks in SVCNet for precise colorization and temporal smoothing, respectively. The first stage includes a pyramid feature encoder to incorporate color scribbles with a grayscale frame, and a semantic feature encoder to extract semantics. The second stage finetunes the output from the first stage by aggregating the information of neighboring colorized frames (as short-range connections) and the first colorized frame (as a long-range connection). To alleviate the color bleeding artifacts, we learn video colorization and segmentation simultaneously. Furthermore, we set the majority of operations on a fixed small image resolution and use a Super-resolution Module at the tail of SVCNet to recover original sizes. It allows the SVCNet to fit different image resolutions at the inference. Finally, we evaluate the proposed SVCNet on DAVIS and Videvo benchmarks. The experimental results demonstrate that SVCNet produces both higher-quality and more temporally consistent videos than other well-known video colorization approaches. The codes and models can be found at https://github.com/zhaoyuzhi/SVCNet.

cs.CV↗

arXiv2023

Three High-rate Beamforming Methods for Active IRS-aided Wireless Network

Due to its ability of breaking the double-fading effect experienced by passive intelligent reflecting surface (IRS), active IRS is evolving a potential technique for future 6G wireless networks. To fully exploit the amplifying gain achieved by active IRS, two high-rate methods, maximum ratio reflecting (MRR) and selective ratio reflecting (SRR) are presented, which are motivated by maximum ratio combining and selective ratio combining. Moreover, both MRR and SRR are in closed-form expressions. To further improve the rate, a maximum approximate-signal-to-noise ratio (Max-ASNR) is first proposed with an alternately iterative infrastructure between adjusting the norm of beamforming vector and its normalized vector. This may make a substantial rate enhancement over existing equal-gain reflecting (EGR). Simulation results show that the proposed three methods perform much better than existing method EGR in terms of rate. They are in decreasing order of rate performance: Max-ASNR, MRR, SRR, and EGR.

eess.SP↗

arXiv2023

Two Rapid Power Iterative DOA Estimators for UAV Emitter Using Massive/Ultra-massive Receive Array

To provide rapid direction finding (DF) for unmanned aerial vehicle (UAV) emitter in future wireless networks, a low-complexity direction of arrival (DOA) estimation architecture for massive multiple input multiple output (MIMO) receiver arrays is constructed. In this paper, we propose two strategies to address the extremely high complexity caused by eigenvalue decomposition of the received signal covariance matrix. Firstly, a rapid power-iterative rotational invariance (RPI-RI) method is proposed, which adopts the signal subspace generated by power iteration to gets the final direction estimation through rotational invariance between subarrays. RPI-RI makes a significant complexity reduction at the cost of a substantial performance loss. In order to further reduce the complexity and provide a good directional measurement result, a rapid power-iterative Polynomial rooting (RPI-PR) method is proposed, which utilizes the noise subspace combined with polynomial solution method to get the optimal direction estimation. In addition, the influence of initial vector selection on convergence in the power iteration is analyzed, especially when the initial vector is orthogonal to the incident wave. Simulation results show that the two proposed methods outperform the conventional DOA estimation methods in terms of computational complexity. In particular, the RPIPR method achieves more than two orders of magnitude lower complexity than conventional methods and achieves performance close to CRLB. Moreover, it is verified that the initial vector and the relative error have a significant impact on the performance of the computational complexity.

cs.IT↗

arXiv2023

Beamforming Design for RIS-Aided AF Relay Networks

Since reconfigurable intelligent surface (RIS) is considered to be a passive reflector for rate performance enhancement, a RIS-aided amplify-and-forward (AF) relay network is presented. By jointly optimizing the beamforming matrix at AF relay and the phase shifts matrices at RIS, two schemes are put forward to address a maximizing signal-to-noise ratio (SNR) problem. Firstly, aiming at achieving a high rate, a high-performance alternating optimization (AO) method based on Charnes-Cooper transformation and semidefinite programming (CCT-SDP) is proposed, where the optimization problem is decomposed to three subproblems solved by CCT-SDP and rank-one solutions can be recovered by Gaussian randomization. While the optimization variables in CCT-SDP method are matrices, which leads to extremely high complexity. In order to reduce the complexity, a low-complexity AO scheme based on Dinkelbachs transformation and successive convex approximation (DT-SCA) is put forward, where matrices variables are transformed to vector variables and three decoupled subproblems are solved by DT-SCA. Simulation results verify that compared to two benchmarks (i.e. a RIS-assisted AF relay network with random phase and a AF relay network without RIS), the proposed CCT-SDP and DT-SCA schemes can harvest better rate performance. Furthermore, it is revealed that the rate of the low-complexity DT-SCA method is close to that of CCT-SDP method.

cs.IT↗

arXiv2023

H2RBox: Horizontal Box Annotation is All You Need for Oriented Object Detection

Oriented object detection emerges in many applications from aerial images to autonomous driving, while many existing detection benchmarks are annotated with horizontal bounding box only which is also less costive than fine-grained rotated box, leading to a gap between the readily available training corpus and the rising demand for oriented object detection. This paper proposes a simple yet effective oriented object detection approach called H2RBox merely using horizontal box annotation for weakly-supervised training, which closes the above gap and shows competitive performance even against those trained with rotated boxes. The cores of our method are weakly- and self-supervised learning, which predicts the angle of the object by learning the consistency of two different views. To our best knowledge, H2RBox is the first horizontal box annotation-based oriented object detector. Compared to an alternative i.e. horizontal box-supervised instance segmentation with our post adaption to oriented object detection, our approach is not susceptible to the prediction quality of mask and can perform more robustly in complex scenes containing a large number of dense objects and outliers. Experimental results show that H2RBox has significant performance and speed advantages over horizontal box-supervised instance segmentation methods, as well as lower memory requirements. While compared to rotated box-supervised oriented object detectors, our method shows very close performance and speed. The source code is available at PyTorch-based \href{https://github.com/yangxue0827/h2rbox-mmrotate}{MMRotate} and Jittor-based \href{https://github.com/yangxue0827/h2rbox-jittor}{JDet}.

cs.CV↗

arXiv2023

A Survey on Label-efficient Deep Image Segmentation: Bridging the Gap between Weak Supervision and Dense Prediction

The rapid development of deep learning has made a great progress in image segmentation, one of the fundamental tasks of computer vision. However, the current segmentation algorithms mostly rely on the availability of pixel-level annotations, which are often expensive, tedious, and laborious. To alleviate this burden, the past years have witnessed an increasing attention in building label-efficient, deep-learning-based image segmentation algorithms. This paper offers a comprehensive review on label-efficient image segmentation methods. To this end, we first develop a taxonomy to organize these methods according to the supervision provided by different types of weak labels (including no supervision, inexact supervision, incomplete supervision and inaccurate supervision) and supplemented by the types of segmentation problems (including semantic segmentation, instance segmentation and panoptic segmentation). Next, we summarize the existing label-efficient image segmentation methods from a unified perspective that discusses an important question: how to bridge the gap between weak supervision and dense prediction -- the current methods are mostly based on heuristic priors, such as cross-pixel similarity, cross-label constraint, cross-view consistency, and cross-image relation. Finally, we share our opinions about the future research directions for label-efficient deep image segmentation.

cs.CV↗

arXiv2023

Precoding and Beamforming Design for Intelligent Reconfigurable Surface-Aided Hybrid Secure Spatial Modulation

Intelligent reflecting surface (IRS) is an emerging technology for wireless communication composed of a large number of low-cost passive devices with reconfigurable parameters, which can reflect signals with a certain phase shift and is capable of building programmable communication environment. In this paper, to avoid the high hardware cost and energy consumption in spatial modulation (SM), an IRS-aided hybrid secure SM (SSM) system with a hybrid precoder is proposed. To improve the security performance, we formulate an optimization problem to maximize the secrecy rate (SR) by jointly optimizing the beamforming at IRS and hybrid precoding at the transmitter. Considering that the SR has no closed form expression, an approximate SR (ASR) expression is derived as the objective function. To improve the SR performance, three IRS beamforming methods, called IRS alternating direction method of multipliers (IRS-ADMM), IRS block coordinate ascend (IRS-BCA) and IRS semi-definite relaxation (IRS-SDR), are proposed. As for the hybrid precoding design, approximated secrecy rate-successive convex approximation (ASR-SCA) method and cut-off rate-gradient ascend (COR-GA) method are proposed. Simulation results demonstrate that the proposed IRS-SDR and IRS-ADMM beamformers harvest substantial SR performance gains over IRS-BCA. Particularly, the proposed IRS-ADMM and IRS-BCA are of low-complexity at the expense of a little performance loss compared with IRS-SDR. For hybrid precoding, the proposed ASR-SCA performs better than COR-GA in the high transmit power region.

cs.IT↗

arXiv2022

D2HNet: Joint Denoising and Deblurring with Hierarchical Network for Robust Night Image Restoration

Night imaging with modern smartphone cameras is troublesome due to low photon count and unavoidable noise in the imaging system. Directly adjusting exposure time and ISO ratings cannot obtain sharp and noise-free images at the same time in low-light conditions. Though many methods have been proposed to enhance noisy or blurry night images, their performances on real-world night photos are still unsatisfactory due to two main reasons: 1) Limited information in a single image and 2) Domain gap between synthetic training images and real-world photos (e.g., differences in blur area and resolution). To exploit the information from successive long- and short-exposure images, we propose a learning-based pipeline to fuse them. A D2HNet framework is developed to recover a high-quality image by deblurring and enhancing a long-exposure image under the guidance of a short-exposure image. To shrink the domain gap, we leverage a two-phase DeblurNet-EnhanceNet architecture, which performs accurate blur removal on a fixed low resolution so that it is able to handle large ranges of blur in different resolution inputs. In addition, we synthesize a D2-Dataset from HD videos and experiment on it. The results on the validation set and real photos demonstrate our methods achieve better visual quality and state-of-the-art quantitative scores. The D2HNet codes and D2-Dataset can be found at https://github.com/zhaoyuzhi/D2HNet.

cs.CV↗

arXiv2022

Phase Optimization for Massive IRS-aided Two-way Relay Network

In this paper, with the help of an intelligent reflecting surface (IRS), the source (S) and destination (D) exchange information through the two-way decode-and-forward relay (TW-DFR). We mainly focus on the phase optimization of IRS to improve the system rate performance. Firstly, a maximizing receive power sum (Max-RPS) method is proposed via eigenvalue decomposition (EVD) with an appreciable rate enhancement, which is called Max-RPS-EVD. To further achieve a higher rate, a method of maximizing minimum rate (Max-Min-R) is proposed with high complexity. To reduce its complexity, a low-complexity method of maximizing the sum rate (Max-SR) via general power iterative (GPI) is proposed, which is called Max-SR-GPI. Simulation results show that the proposed three methods outperform the case of random phase method, especially the proposed Max-SR-GPI method is the best one achieving at least 20\% rate gain over random phase. Additionally, it is also proved the optimal rate can be achieved when TW-DFR and IRS are located in the middle of S and D.

cs.IT↗

arXiv2022

ChildPredictor: A Child Face Prediction Framework with Disentangled Learning

The appearances of children are inherited from their parents, which makes it feasible to predict them. Predicting realistic children's faces may help settle many social problems, such as age-invariant face recognition, kinship verification, and missing child identification. It can be regarded as an image-to-image translation task. Existing approaches usually assume domain information in the image-to-image translation can be interpreted by "style", i.e., the separation of image content and style. However, such separation is improper for the child face prediction, because the facial contours between children and parents are not the same. To address this issue, we propose a new disentangled learning strategy for children's face prediction. We assume that children's faces are determined by genetic factors (compact family features, e.g., face contour), external factors (facial attributes irrelevant to prediction, such as moustaches and glasses), and variety factors (individual properties for each child). On this basis, we formulate predictions as a mapping from parents' genetic factors to children's genetic factors, and disentangle them from external and variety factors. In order to obtain accurate genetic factors and perform the mapping, we propose a ChildPredictor framework. It transfers human faces to genetic factors by encoders and back by generators. Then, it learns the relationship between the genetic factors of parents and children through a mapping function. To ensure the generated faces are realistic, we collect a large Family Face Database to train ChildPredictor and evaluate it on the FF-Database validation set. Experimental results demonstrate that ChildPredictor is superior to other well-known image-to-image translation methods in predicting realistic and diverse child faces. Implementation codes can be found at https://github.com/zhaoyuzhi/ChildPredictor.

cs.CV↗

arXiv2022

Beamforming Design for IRS-Aided Decode-and-Forward Relay Wireless Network

As a low-cost and low-power-consumption passive reflector, intelligent reflecting surface (IRS) can make a significant rate improvement by building a programmable wireless environment. To improve the rate performance and coverage range of wireless networks, an IRS-aided decode-and-forward (DF) relay network is proposed with multiple antennas at relay station (RS). To achieve a high rate, an alternately iterative structure (AIS) of maximizing receive power (Max-RP) at RS is proposed to jointly optimize the beamforming vectors at RS and phase shifts at IRS. Considering its high-complexity, two low-complexity Max-RP schemes of null-space projection (NSP) plus maximum ratio combining (MRC) and IRS element selection (IRSES) plus MRC are presented to reduce this complexity, respectively. For the former, NSP is used to separate the reflected signal from IRS and the direct transmitted signal from source and MRC is adopted to combine the two signals at RS. For the latter, the basic concept of IRSES is as follows: IRS is partitioned into M subsets of elements and adjusting the phases of all elements per subset make all reflected signals and the direct signal from source phase alignment (PA) at the corresponding antenna of relay. Simulation results show that the proposed three methods perform much better than the existing network with single-antenna relay in terms of rate performance. In particular, a 85% rate gain over existing scheme is achieved in the high signal-to-noise ratio region. Moreover, it is verified that the positions of RS and IRS have a substantial impact on rate performance, and there exists an optimal positions of RS and IRS.

cs.IT↗