arXiv subjects

Xueshang Feng

Publications and source records attributed to Xueshang Feng.

At least 55 records · Page 3Linked to original sources

arXiv2018

A Two-Step Magnetic Reconnection in a Confined X-class Flare in Solar Active Region 12673

Solar flares are often associated with coronal eruptions, but there are confined ones without eruption, even for some X-class flares. How such large flares occurred and why they are confined are still not well understood. Here we studied a confined X2.2 flare in NOAA 12673 on 2017 September 6. It exhibits two episodes of flare brightening with rather complex, atypical ribbons. Based on topology analysis of extrapolated coronal magnetic field, we revealed that there is a two-step magnetic reconnection process during the flare. Prior to the flare, there is a magnetic flux rope (MFR) with one leg rooted in a rotating sunspot. Neighboring to the leg is a magnetic null-point structure. The sunspot drives the MFR to expand, pushing magnetic flux to the null point, and reconnection is first triggered there. The disturbance from the null-point reconnection triggers the second reconnection, i.e., a tether-cutting reconnection below the rope. However, these two reconnections failed to produce an eruption, because the rope is firmly held by its strapping flux. Furthermore, we compared this flare with an eruptive X9.3 flare in the same region with 2 hours later, which has a similar MFR configuration. The key difference between them is that, for the confined flare, the MFR is fully below the threshold of torus instability, while for the eruptive one, the MFR reaches entirely above the threshold. This study provides a good evidence supporting that reconnection alone may not be able to trigger eruption, rather, MHD instability plays a more important role.

astro-ph.SR↗

arXiv2018

Magnetohydrodynamic Simulation of the X9.3 Flare on 2017 September 6: Evolving Magnetic Topology

Three-dimensional magnetic topology is crucial to understanding the explosive release of magnetic energy in the corona during solar flares. Much attention has been given to the pre-flare magnetic topology to identify candidate sites of magnetic reconnection, yet it is unclear how the magnetic reconnection and its attendant topological changes shape the eruptive structure and how the topology evolves during the eruption. Here we employed a realistic, data-constrained magnetohydrodynamic simulation to study the evolving magnetic topology for an X9.3 eruptive flare that occurred on 2017 September 6. The simulation successfully reproduces the eruptive features and processes in unprecedented detail. The numerical results reveal that the pre-flare corona contains multiple twisted flux systems with different connections, and during the eruption, these twisted fluxes form a coherent flux rope through tether-cutting-like magnetic reconnection below the rope. Topological analysis shows that the rising flux rope is wrapped by a quasi-separatrix layer, which intersects itself below the rope, forming a topological structure known as hyperbolic flux tube, where a current sheet develops, triggering the reconnection. By mapping footpoints of the newly-reconnected field lines, we are able to reproduce both the spatial location and, for the first time, the temporal separation of the observed flare ribbons, as well as the dynamic boundary of the flux rope's feet. Futhermore, the temporal profile of the total reconnection flux is comparable to the soft X-ray light curve. Such a sophisticated characterization of the evolving magnetic topology provides important insight into the eventual understanding and forecast of solar eruptions.

astro-ph.SR↗

arXiv2018

Forecasting the Arrival Time of Coronal Mass Ejections: Analysis of the CCMC CME Scoreboard

Accurate forecasting of the properties of coronal mass ejections as they approach Earth is now recognized as an important strategic objective for both NOAA and NASA. The time of arrival of such events is a key parameter, one that had been anticipated to be relatively straightforward to constrain. In this study, we analyze forecasts submitted to the Community Coordinated Modeling Center (CCMC) at NASA's Goddard Space Flight Center over the last six years to answer the following questions: (1) How well do these models forecast the arrival time of CME-driven shocks? (2) What are the uncertainties associated with these forecasts? (3) Which model(s) perform best? (4) Have the models become more accurate during the past six years? We analyze all forecasts made by 32 models from 2013 through mid 2018, and additionally focus on 28 events all of which were forecasted by six models. We find that the models are generally able to predict CME-shock arrival times -- in an average sense -- to within 10 hours, but with standard deviations often exceeding 20 hours. The best performers, on the other hand, maintained a mean error (bias) of -1 hour, a mean absolute error of 13 hours, and a precision (s.d.) of 15 hours. Finally, there is no evidence that the forecasts have become more accurate during this interval. We discuss the intrinsic simplifications of the various models analyzed, the limitations of this investigation, and suggest possible paths to improve these forecasts in the future.

physics.space-ph↗

arXiv2018

Decipher the Three-Dimensional Magnetic Topology of a Great Solar Flare

Three-dimensional magnetic topology of solar flare plays a crucial role in understanding its explosive release of magnetic energy in the corona. However, such three-dimensional coronal magnetic field is still elusive in direct observation. Here we realistically simulate the magnetic evolution during the eruptive process of a great flare, using a numerical magnetohydrodynamic model constrained by observed solar vector magnetogram. The numerical results reveal that the pre-flare corona contains multi-set twisted magnetic flux, which forms a coherent rope during the eruption. The rising flux rope is wrapped by a quasi-separatrix layer, which intersects itself below the rope, forming a hyperbolic flux tube and magnetic reconnection is triggered there. By tracing the footprint of the newly-reconnected field lines, we reproduce both the spatial location and its temporal evolution of flare ribbons with an expected accuracy in comparison of observed images. This scenario strongly confirms the three-dimensional version of standard flare model.

astro-ph.SR↗

arXiv2017

Corner singularity and its application in regular parameters optimization: technique renovation for Grad-Shafranov reconstruction

Further studies on the corner singularity of GS reconstruction are are compiled in this paper. It's focused on solution of the Data Completion (DC) problem with the Extended Hilbert Transform (EHT) over plane rectangular region. Optimal selections of the regular parameters in{\it Tikhonov} solution of corresponding DC problem are developed in this study. The 6-parameter regular solutions and the {\it Jacobian} matrix and one {\it Hessian} tensor to the regular parameters are derived in this work. A concise formula for EHT in the near field of corners, which shows property for EHT near the corner, are also provided. It serves as the additional constraints for our parameter optimization problem (OP). Third, a nonlinear convex function defined by the regular solution and the corner constraints is introduced and is taken as the object function for the OP of the 6 regular parameters on half-space $(\mathbf{p}>0)$. Given an initial guess of $\mathbf{p}_0$, the optimal parameters are solved from the OP through a well known constrained nonlinear optimization method. Last, the benchmark tests to the proposed solution approach are carried out, and detailed results from totally 9 different bench-cases are tabulated. In contrast to solutions with given regular parameters, our bench results demonstrate that an objective way for selection of the optimal $\mathbf{p}$ is successfully laid out here. Robustness and efficiency of the suggested new approach are also highlighted in this study.

astro-ph.IM↗

arXiv2017

Reconstruction of a Large-scale Pre-flare Coronal Current Sheet Associated with an Homologous X-shaped Flare

As a fundamental magnetic structure in the solar corona, electric current sheets (CSs) can form either prior to or during solar flare, and they are essential for magnetic energy dissipation in the solar corona by enabling magnetic reconnection. However static reconstruction of CS is rare, possibly due to limitation inherent in available coronal field extrapolation codes. Here we present the reconstruction of a large-scale pre-flare CS in solar active region 11967 using an MHD-relaxation model constrained by SDO/HMI vector magnetogram. The CS is found to be associated with a set of peculiar homologous flares that exhibit unique X-shaped ribbons and loops occurring in a quadrupolar magnetic configuration. This is evidenced by that the field lines traced from the CS to the photosphere form an X shape which nearly precisely reproduces the shape of the observed flare ribbons, suggesting that the flare is a product of the dissipation of the CS through reconnection. The CS forms in a hyperbolic flux tube, which is an intersection of two quasi-separatrix layers. The recurrence of the X-shaped flares might be attributed to the repetitive formation and dissipation of the CS, as driven by the photospheric footpoint motions. These results demonstrate the power of data-constrained MHD model in reproducing CS in the corona as well as providing insight into the magnetic mechanism of solar flares.

astro-ph.SR↗

arXiv2017

A Magnetic Bald-Patch Flare in Solar Active Region 11117

With SDO observations and a data-constrained MHD model, we identify a confined multi-ribbon flare occurred on 2010 October 25 in solar active region 11117 as a magnetic bald patch (BP) flare with strong evidences. From the photospheric magnetic field observed by SDO/HMI, we find there is indeed magnetic BPs on the PILs which match parts of the flare ribbons. From the 3D coronal magnetic field derived from a MHD relaxation model constrained by the vector magnetograms, we find strikingly good agreement of the BP separatrix surface (BPSS) footpoints with the flare ribbons, and the BPSS itself with the hot flaring loop system. Moreover, the triggering of the BP flare can be attributed to a small flux emergence under the lobe of the BPSS, and the relevant change of the coronal magnetic field through the flare is well reproduced by the pre-flare and post-flare MHD solutions, which match the corresponding pre and post-flare AIA observations, respectively. Our work contributes to the study of non-typical flares that constitute the majority of solar flares but cannot be explained by the standard flare model.

astro-ph.SR↗

arXiv2016

Multi-scale Pressure-balanced Structures in Three-dimensional Magnetohydrodynamic Turbulence

Observations of solar wind turbulence indicate the existence of multi-scale pressure-balanced structures (PBSs) in the solar wind. In this work, we conduct a numerical simulation to investigate multi-scale PBSs and in particular their formation in compressive MHD turbulence. By the use of a higher order Godunov code Athena,a driven compressible turbulence with an imposed uniform guide field is simulated. The simulation results show that both the magnetic pressure and the thermal pressure exhibit a turbulent spectrum with a Kolmogorov-like power law, and that in many regions of the simulation domain they are anti-correlated. The computed wavelet cross-coherence spectrum of the magnetic pressure and the thermal pressure, as well as their space series, indicate the existence of multi-scale PBSs, with the small PBSs being embedded in the large ones. These multi-scale PBSs are likely to be related with the highly oblique-propagating slow-mode waves, as the traced multi-scale PBS is found to be traveling in a certain direction at a speed consistent with that predicted theoretically for a slow-mode wave propagating in the same direction.

physics.space-ph↗

arXiv2016

A Numerical Investigation of the Recurrent High-speed Jets as a Possibility of Solar Wind Origin

In the solar atmosphere, jets are prevalent and they are significant for the mass and energy transport. Here we conduct numerical simulations to investigate the mass and energy contributions of the recently observed high-speed jets to the solar wind. With a one-dimensional hydrodynamic solar wind model, the time-dependent pulses are imposed at the bottom to simulate the jets. The simulation results show that without other energy source, the injected plasmas are accelerated effectively to be a transonic wind with a substantial mass flux. The rapid acceleration occurs close to the Sun, and the resulting asymptotic speed, number density at 0.3 AU, as well as mass flux normalized to 1 AU are compatible with in situ observations. As a result of the high speed, the imposed pulses generate a train of shocks traveling upward. By tracing the motions of the injected plasma, it is found that these shocks heat and accelerate the injected plasmas successively step by step to push them upward and eventually allow them to escape. The parametric studies show that increasing the speed of the imposed pulses or their temperature gives a considerably faster, and hotter solar wind, while increasing their number density or decreasing their recurring period only bring a denser solar wind. These studies provide a possibility that the ubiquitous high-speed jets are a substantial mass and energy contributions to the solar wind.

astro-ph.SR↗

arXiv2016

Origin of Both the Fast Hot Jet and the Slow Cool Jet from Magnetic Flux Emergence and Advection in the Solar Transition Region

In the solar atmosphere, the jets are ubiquitous and found to be at various spatia-temporal scales. They are significant to understand energy and mass transport in the solar atmosphere. Recently, the high-speed transition region jets are reported from the observation. Here we conduct a numerical simulation to investigate the mechanism in their formation. Driven by the supergranular convection motion, the magnetic reconnection between the magnetic loop and the background open flux occurring in the transition region is simulated with a two-dimensional magnetohydrodynamics model. The simulation results show that not only a fast hot jet, much resemble the found transition region jets, but also a adjacent slow cool jet, mostly like classical spicules, is launched. The force analysis shows that the fast hot jet is continually driven by the Lorentz force around the reconnection region, while the slow cool jet is induced by an initial kick through the Lorentz force associated with the emerging magnetic flux. Also, the features of the driven jets change with the amount of the emerging magnetic flux, giving the varieties of both jets. These results will inspire our understanding of the formation of the prevalence of both the fast hot jet and slow cool jet from the solar transition region and chromosphere.

astro-ph.SR↗

arXiv2016

Comparison of CME/shock propagation models with heliospheric imaging and in situ observations

The prediction of the arrival time for fast coronal mass ejections (CMEs) and their associated shocks is highly desirable in space weather studies. In this paper, we use two shock propagation models, i.e. Data Guided Shock Time Of Arrival (DGSTOA) and Data Guided Shock Propagation Model (DGSPM), to predict the kinematical evolution of interplanetary shocks associated with fast CMEs. DGSTOA is based on the similarity theory of shock waves in the solar wind reference frame, and DGSPM on the non-similarity theory in the stationary reference frame. The inputs are the kinematics of the CME front at the maximum speed moment obtained from the geometric triangulation method applied to STEREO imaging observations together with the Harmonic Mean approximation. The outputs provide the subsequent propagation of the associated shock. We apply these models to the CMEs on 2012 January 19, January 23, and March 7. We find that the shock models predict reasonably well the shock's propagation after the impulsive acceleration. The shock's arrival time and local propagation speed at Earth predicted by these models are consistent with in situ measurements of WIND. We also employ the Drag-Based Model (DBM) as a comparison, and find that it predicts a steeper deceleration than the shock models after the rapid deceleration phase. The predictions of DBM at 1 AU agree with the following ICME or sheath structure, not the preceding shock. These results demonstrate the applicability of the shock models used here for future arrival time prediction of interplanetary shocks associated with fast CMEs.

astro-ph.SR↗

arXiv2016

How did a Major Confined Flare Occur in Super Solar Active Region 12192?

We study the physical mechanism of a major X-class solar flare that occurred in the super NOAA active region (AR) 12192 using a data-driven numerical magnetohydrodynamic (MHD) modeling complemented with observations. With the evolving magnetic fields observed at the solar surface as bottom boundary input, we drive an MHD system to evolve self-consistently in correspondence with the realistic coronal evolution. During a two-day time interval, the modeled coronal field has been slowly stressed by the photospheric field evolution,which gradually created a large-scale coronal current sheet, i.e., a narrow layer with intense current, in the core of the AR. The current layer was successively enhanced until it became so thin that a tether-cutting reconnection between the sheared magnetic arcades was set in, which led to a flare. The modeled reconnecting field lines and their footpoints match well the observed hot flaring loops and the flare ribbons, respectively, suggesting that the model has successfully "reproduced" the macroscopic magnetic process of the flare. In particular, with simulation, we explained why this event is a confined eruption-the consequent of the reconnection is the shared arcade instead of a newly formed flux rope. We also found much weaker magnetic implosion effect comparing to many other X-class flares

astro-ph.SR↗

arXiv2016

Dark Post-Flare Loops Observed by Solar Dynamics Observatory

Solar post-flare loops (PFLs) are arcade-like loop systems that appear during the gradual phases of eruptive flares. The extreme ultraviolet (EUV) observations from the Atmospheric Imaging Assembly (AIA) on board the Solar Dynamics Observatory (SDO) allow us to investigate the fine structures in PFLs. In this work, we focus on studying the dark post-flare loops (DPFLs) during X-class flares, which are more evident in SDO/AIA data than in previous EUV data. We identify and analyze the DPFLs observed by SDO and find that: (1) the DPFLs of an X5.4 flare have an average lifetime of 10.0 $\pm$ 5.5 minutes, an average width of 1022 $\pm$ 339 km, and an average maximum length of 33 $\pm$ 10 Mm, (2) blob-like falling features with a size close to the resolution of SDO/AIA are identified in the DPFLs and they have an average velocity of 76 $\pm$ 19 km s$^{-1}$, and (3) the average widths of the DPFLs slightly increase with the characteristic temperatures in AIA 304, 171, 193, and 211 Å channels. Our investigation shows that DPFLs are found in all of the 20 cases within this study, which suggests that they are a common phenomenon in X-class flares and are probably produced by the same mechanism that creates coronal rain.

astro-ph.SR↗

arXiv2015

A Comparison Study of a Solar Active-Region Eruptive Filament and a Neighboring Non-Eruptive Filament

Solar active region (AR) 11283 is a very magnetically complex region and it has produced many eruptions. However, there exists a non-eruptive filament in the plage region just next to an eruptive one in the AR, which gives us an opportunity to perform a comparison analysis of these two filaments. The coronal magnetic field extrapolated using a CESE-MHD-NLFFF code (Jiang & Feng 2013) reveals that two magnetic flux ropes (MFRs) exist in the same extrapolation box supporting these two filaments, respectively. Analysis of the magnetic field shows that the eruptive MFR contains a bald-patch separatrix surface (BPSS) co-spatial very well with a pre-eruptive EUV sigmoid, which is consistent with the BPSS model for coronal sigmoids. The magnetic dips of the non-eruptive MFRs match Hα observation of the non-eruptive filament strikingly well, which strongly supports the MFR-dip model for filaments. Compared with the non-eruptive MFR/filament (with a length of about 200 Mm), the eruptive MFR/filament is much smaller (with a length of about 20 Mm), but it contains most of the magnetic free energy in the extrapolation box and holds a much higher free energy density than the non-eruptive one. Both the MFRs are weakly twisted and cannot trigger kink instability. The AR eruptive MFR is unstable because its axis reaches above a critical height for torus instability, at which the overlying closed arcades can no longer confine the MFR stably. On the contrary, the quiescent MFR is very firmly held by its overlying field, as its axis apex is far below the torus-instability threshold height. Overall, this comparison investigation supports that MFR can exist prior to eruption and the ideal MHD instability can trigger MFR eruption.

astro-ph.SR↗

arXiv2015

Testing a Solar Coronal Magnetic Field Extrapolation Code with the Titov-Demoulin Magnetic Flux Rope Model

In the solar corona, magnetic flux rope is believed to be a fundamental structure accounts for magnetic free energy storage and solar eruptions. Up to the present, the extrapolation of magnetic field from boundary data is the primary way to obtain fully three-dimensional magnetic information of the corona. As a result, the ability of reliable recovering coronal magnetic flux rope is important for coronal field extrapolation. In this paper, our coronal field extrapolation code (CESE-MHD-NLFFF, Jiang & Feng 2012) is examined with an analytical magnetic flux rope model proposed by Titov & Demoulin (1999), which consists of a bipolar magnetic configuration holding an semi-circular line-tied flux rope in force-free equilibrium. By using only the vector field in the bottom boundary as input, we test our code with the model in a representative range of parameter space and find that the model field is reconstructed with high accuracy. Especially, the magnetic topological interfaces formed between the flux rope and the surrounding arcade, i.e., the "hyperbolic flux tube" and "bald patch separatrix surface", are also reliably reproduced. By this test, we demonstrate that our CESE-MHD-NLFFF code can be applied to recovering magnetic flux rope in the solar corona as long as the vector magnetogram satisfies the force-free constraints.

astro-ph.SR↗

arXiv2015

Formation of Rotational Discontinuities in Compressive three-dimensional MHD Turbulence

Measurements of solar wind turbulence reveal the ubiquity of discontinuities. In this study, we investigate how the discontinuities, especially rotational discontinuities (RDs), are formed in magnetohydrodynamic (MHD) turbulence. In a simulation of the decaying compressive three-dimensional (3-D) MHD turbulence with an imposed uniform background magnetic field, we detect RDs with sharp field rotations and little variations of magnetic field intensity as well as mass density. At the same time, in the de Hoffman-Teller (HT) frame, the plasma velocity is nearly in agreement with the Alfvén speed, and is field-aligned on both sides of the discontinuity. We take one of the identified RDs to analyze in details its 3-D structure and temporal evolution. By checking the magnetic field and plasma parameters, we find that the identified RD evolves from the steepening of the Alfvén wave with moderate amplitude, and that steepening is caused by the nonuniformity of the Alfvén speed in the ambient turbulence.

astro-ph.SR↗

arXiv2015

Evolution of the 2012 July 12 CME from the Sun to the Earth: Data-Constrained Three-Dimensional MHD Simulations

The dynamic process of coronal mass ejections (CMEs) in the heliosphere provides us the key information for evaluating CMEs' geo-effectiveness and improving the accurate prediction of CME induced Shock Arrival Time (SAT) at the Earth. We present a data constrained three dimensional (3D) magnetohydrodynamic (MHD) simulation of the evolution of the CME in a realistic ambient solar wind for the July 12-16, 2012 event by using the 3D COIN-TVD MHD code. A detailed comparison of the kinematic evolution of the CME between the observations and the simulation is carried out, including the usage of the time-elongation maps from the perspectives of both Stereo A and Stereo B. In this case study, we find that our 3D COIN-TVD MHD model, with the magnetized plasma blob as the driver, is able to re-produce relatively well the real 3D nature of the CME in morphology and their evolution from the Sun to Earth. The simulation also provides a relatively satisfactory comparison with the in-situ plasma data from the Wind spacecraft.

astro-ph.SR↗

arXiv2014

Could the collision of CMEs in the heliosphere be super-elastic? --- Validation through three-dimensional simulations

Though coronal mass ejections (CMEs) are magnetized fully-ionized gases, a recent observational study of a CME collision event in 2008 November has suggested that their behavior in the heliosphere is like elastic balls, and their collision is probably super-elastic \citep{Shen_etal_2012}. If this is true, this finding has an obvious impact on the space weather forecasting because the direction and veliocity of CMEs may change. To verify it, we numerically study the event through three-dimensional MHD simulations. The nature of CMEs' collision is examined by comparing two cases. In one case the two CMEs collide as observed, but in the other, they do not. Results show that the collision leads to extra kinetic energy gain by 3%--4% of the initial kinetic energy of the two CMEs. It firmly proves that the collision of CMEs could be super-elastic.

astro-ph.SR↗