arXiv subjects

Xuesong Cai

Publications and source records attributed to Xuesong Cai.

43 records · Page 3Linked to original sources

arXiv2021

Dynamic mmWave Channel Emulation in a Cost-Effective MPAC with Dominant-Cluster Concept

Millimeter-Wave (mmWave) massive multiple-input multiple-output (MIMO) has been considered as a key enabler for the fifth-generation (5G) communications. It is essential to design and test mmWave 5G devices under various realistic scenarios, since the radio propagation channels pose intrinsic limitations on the performance. This requires emulating realistic dynamic mmWave channels in a reproducible manner in laboratories, which is the goal of this paper. In this contribution, we firstly illustrate the dominant-cluster(s) concept, where the non-dominant clusters in the mmWave channels are pruned, for mmWave 5G devices applying massive MIMO beamforming. This demonstrates the importance and necessity to accurately emulate the mmWave channels at a cluster level rather than the composite-channel level. Thus, an over-the-air (OTA) emulation strategy for dynamic mmWave channels is proposed based on the concept of dominant-cluster(s) in a sectored multiprobe anechoic chamber (SMPAC). The key design parameters including the probe number and the angular spacing of probes are investigated through comprehensive simulations. A cost-effective switchcircuit is also designed for this purpose and validated in the simulation. Furthermore, a dynamic mmWave channel measured in an indoor scenario at 28-30 GHz is presented, where the proposed emulation strategy is also validated by reproducing the measured reality.

eess.SP↗

arXiv2021

A Centralized and Scalable Uplink Power Control Algorithm in Low SINR Scenarios

Power control is becoming increasingly essential for the fifth-generation (5G) and beyond systems. An example use-case, among others, is the unmanned-aerial-vehicle (UAV) communications where the nearly line-of-sight (LoS) radio channels may result in very low signal-to-interference-plus-noise ratios (SINRs). Investigations in [1] proposed to efficiently and reliably solve this kind of non-convex problem via a series of geometrical programmings (GPs) using condensation approximation. However, it is only applicable for a small-scale network with several communication pairs and practically infeasible with more (e.g. tens of) nodes to be jointly optimized. We therefore in this paper aim to provide new insights into this problem. By properly introducing auxiliary variables, the problem is transformed to an equivalent form which is simpler and more intuitive for condensation. A novel condensation method with linear complexity is also proposed based on the form. The enhancements make the GP-based power control feasible for both small-and especially large-scale networks that are common in 5G and beyond. The algorithm is verified via simulations. A preliminary case study of uplink UAV communications also shows the potential of the algorithm.

eess.SP↗

arXiv2021

Empirical Low-Altitude Air-to-Ground Spatial Channel Characterization for Cellular Networks Connectivity

Cellular-connected unmanned aerial vehicles (UAVs) have recently attracted a surge of interest in both academia and industry. Understanding the air-to-ground (A2G) propagation channels is essential to enable reliable and/or high-throughput communications for UAVs and protect the ground user equipments (UEs). In this contribution, a recently conducted measurement campaign for the A2G channels is introduced. A uniform circular array (UCA) with 16 antenna elements was employed to collect the downlink signals of two different Long Term Evolution (LTE) networks, at the heights of 0-40m in three different, namely rural, urban and industrial scenarios. The channel impulse responses (CIRs) have been extracted from the received data, and the spatial/angular parameters of the multipath components in individual channels were estimated according to a high-resolution-parameter estimation (HRPE) principle. Based on the HRPE results, clusters of multipath components were further identified. Finally, comprehensive spatial channel characteristics were investigated in the composite and cluster levels at different heights in the three scenarios.

eess.SP↗

arXiv2021

Joint Modeling of Received Power, Mean Delay, and Delay Spread for Wideband Radio Channels

We propose a multivariate log-normal distribution to jointly model received power, mean delay, and root mean square (rms) delay spread of wideband radio channels, referred to as the standardized temporal moments. The model is validated using experimental data collected from five different measurement campaigns (four indoor and one outdoor scenario). We observe that the received power, mean delay and rms delay spread are correlated random variables and, therefore, should be simulated jointly. Joint models are able to capture the structure of the underlying process, unlike the independent models considered in the literature. The proposed model of the multivariate log-normal distribution is found to be a good fit for a large number of wideband data-sets.

eess.SP↗

arXiv2020

Air-to-Ground Channel Characterization for Low-Height UAVs in Realistic Network Deployments

Due to the decrease in cost, size and weight, \acp{UAV} are becoming more and more popular for general-purpose civil and commercial applications. Provision of communication services to \acp{UAV} both for user data and control messaging by using off-the-shelf terrestrial cellular deployments introduces several technical challenges. In this paper, an approach to the air-to-ground channel characterization for low-height \acp{UAV} based on an extensive measurement campaign is proposed, giving special attention to the comparison of the results when a typical directional antenna for network deployments is used and when a quasi-omnidirectional one is considered. Channel characteristics like path loss, shadow fading, root mean square delay and Doppler frequency spreads and the K-factor are statistically characterized for different suburban scenarios.

eess.SP↗

arXiv2019

A Complexity-Efficient High Resolution Propagation Parameter Estimation Algorithm for Ultra-Wideband Large-Scale Uniform Circular Array

Millimeter wave (mm-wave) communication with large-scale antenna array configuration is seen as the key enabler of the next generation communication systems. Accurate knowledge of the mm-wave propagation channels is fundamental and essential. In this contribution, a novel complexity-efficient high resolution parameter estimation (HRPE) algorithm is proposed for the mm-wave channel with large-scale uniform circular array (UCA) applied. The proposed algorithm is able to obtain the high-resolution estimation results of the spherical channel propagation parameters. The prior channel information in the delay domain, i.e., the delay trajectories of individual propagation paths observed across the array elements, is exploited, by combining the high-resolution estimation principle and the phase mode excitation technique. Fast initializations, effective interference cancellations and reduced searching spaces achieved by the proposed schemes significantly decrease the algorithm complexity. Furthermore, the channel spatial non-stationarity in path gain across the array elements is considered for the first time in the literature for propagation parameter estimation, which is beneficial to obtain more realistic results as well as to decrease the complexity. A mm-wave measurement campaign at the frequency band of 28-30 GHz using a large-scale UCA is exploited to demonstrate and validate the proposed HRPE algorithm.

eess.SP↗

arXiv2019

An Empirical Air-to-Ground Channel Model Based on Passive Measurements in LTE

In this paper, a recently conducted measurement campaign for unmanned-aerial-vehicle (UAV) channels is introduced. The downlink signals of an in-service long-time-evolution (LTE) network which is deployed in a suburban scenario were acquired. Five horizontal and five vertical flight routes were considered. The channel impulse responses (CIRs) are extracted from the received data by exploiting the cell specific signals (CRSs). Based on the CIRs, the parameters of multipath components (MPCs) are estimated by using a high-resolution algorithm derived according to the space-alternating generalized expectation-maximization (SAGE) principle. Based on the SAGE results, channel characteristics including the path loss, shadow fading, fast fading, delay spread and Doppler frequency spread are thoroughly investigated for different heights and horizontal distances, which constitute a stochastic model.

eess.SP↗