Searcharxiv⌕ Search

arXiv subjects

Y. Copin

Publications and source records attributed to Y. Copin.

At least 19 recordsLinked to original sources

ZTF-SEDm Type Ia supernova sample for Twins Embedding spectrophotometric standardization

This paper has two aims: the first aim is to build a large homogeneous spectrophotometric sample of Type Ia supernovae (SNe Ia), using 3069 spectra from the second data release of the Zwicky Transient Facility (ZTF DR2). Using this sample we reproduce, as the second objective of the paper, the Twins Embedding (TE) spectrophotometric standardization method, which led to an exceptionally low value of 0.073 mag for the intrinsic scatter. We improved the flux-calibration accuracy of the SEDm SN Ia spectrum sample using the ZTF photometric data, which are calibrated at the percent level. We then applied the three steps of the TE parameterization to a subset of 783 ZTF SN spectra near maximum light, and analyse the resulting standardization methods. The precision of the phase-correction model, which is the first step of the TE, is estimated at 0.01 mag in g band, using ZTF data. Despite the challenge posed by the ZTF spectrum-extraction pipeline, we applied a first standardization in color based on the second step of the TE, called Read Between The Lines (RBTL). When considering the scatter due to redshift error and flux calibration error, we estimated a 0.129 mag Hubble residual scatter for this ZTF sample as an upper limit. As expected from the low spectral quality, the final TE standardization based on three nonlinear parameters did not improve the overall dispersion. We release 1897 flux calibrated spectra of 1607 SNe Ia with an estimated photometric accuracy of 0.07 mag. We further demonstrate the ability to apply a spectrophotometric standardization with limited quality spectra. The RBTL standardisation is more efficient than that of SALT with one less parameter, and the resulting host steps are consistent with zero, making it less prone to astrophysical bias. For future spectroscopic surveys, a better spectral quality would enable the full TE standardization to be computed. (Abridged)

astro-ph.CO↗

Euclid: Quick Data Release (Q1) -- Ultracool dwarfs in the Euclid Deep Fields

Ultracool dwarfs (UCDs) encompass the lowest-mass stars and brown dwarfs at the substellar boundary. These intrinsically faint objects are challenging to detect, but the wide coverage and deep sensitivity of the Euclid survey increase confirmed UCD counts by orders of magnitude. We carried out a systematic study using Euclid Quick Data Release (Q1) low-resolution near-infrared spectra to identify and characterise UCDs. A sample of previously known UCDs in Q1 validated the analysis, which was then applied to newly identified UCD candidates in Euclid Deep Field North (EDF-N; 22.9 deg^2, down to J_E ~ 24.5 mag). We confirm 33 new UCDs in EDF-N, spanning spectral types M7-T1 (J_E = 17-21 mag) and distances of 50-600 pc. Two objects were followed up with optical and NIR observations using the Gran Telescopio Canarias, providing independent validation of Euclid classifications. We determined spectral types for 33 new UCDs and 167 previously known UCDs by fitting SpeX Prism Library Analysis Toolkit standards. The known sample includes 103 Dark Energy Survey objects (M7-T0, J_E = 17-22 mag), 6 literature sources (M8-T7, J_E = 18-20 mag), and 58 Gaia sources (M7-L1, J_E = 17-24 mag). Independent stellar parameters from atmospheric model fitting agree well with Euclid spectral types. We also investigated Gaia UCDs in Q1 by combining mean XP spectra with Euclid NIR spectra to determine radii. We present a publicly available catalogue including observations, classifications, and stellar parameters. This work demonstrates Euclid's capability to characterise faint stellar populations, establishing a foundation for large-scale UCD studies.

astro-ph.SR↗

Euclid Quick Data Release (Q1). Data processing for intracluster light measurements

The Euclid survey provides images with extraordinary potential for studies of the low-surface-brightness Universe, including intracluster light (ICL). However, to realise this promise, the data must be carefully treated to minimise background variations while preserving the signal from diffuse structures. In this work, we describe the post-processing and measurement procedures used for studies of ICL with Euclid. We demonstrate that we are able to substantially reduce background variations without resorting to a small-scale background subtraction. By injecting simulated clusters into the real images, we show that our approach preserves the faint outskirts of extended sources. On scales of several arcminutes, we can reliably detect surface-brightness levels around 27.5 mag arcsec$^{-2}$ in $Y_\textrm{E}$, $J_\textrm{E}$, $H_\textrm{E}$, and 29 mag arcsec$^{-2}$ in $I_\textrm{E}$. As a result, we can obtain accurate measurements of the ICL in individual clusters from the local Universe out to z~0.8 with uncertainties on the order of 10% in surface brightness, 10 degrees in position angle, and 0.1 in ellipticity. Our ability to measure the diffuse light with Euclid is thus set to meet expectations and revolutionise our understanding of the ICL.

astro-ph.GA↗

Euclid Quick Data Release (Q1). The shape of cluster haloes revealed by intracluster light

Intracluster light (ICL) offers a luminous route for measuring the shapes and orientations of cluster haloes. We used Euclid Quick Data Release (Q1) images to quantify ICL shapes for 205 clusters at $0.1 \leq z \leq 0.8$ selected from the eROSITA All-Sky Survey and the Dark Energy Survey. We measured the ICL properties across five bands ($I_\mathrm{E}$, $Y_\mathrm{E}$, $J_\mathrm{E}$, $H_\mathrm{E}$ and the coadded $YJH_\mathrm{E}$), and find that the shape parameters are consistent across the filters, with the $H_\mathrm{E}$ band probing the profiles to the largest cluster-centric distances ($0.1R_{200\mathrm{c}}\sim100$ kpc). The ICL ellipticity ($e=1-b/a$) distribution peaks at 0.5, consistent with halo ellipticities inferred from strong and weak lensing studies, suggesting that the ICL traces the large-scale structure of the clusters. Cluster cores, dominated by brightest cluster galaxy (BCG) light, are round ($e\sim0.2$), while the ICL becomes progressively more elongated at large radii, reaching an ellipticity of $\sim0.5$ by $0.1R_{200\mathrm{c}}$. We find that the ICL is closely aligned with the BCG (87% lie within 30$^\circ$), but shows a weaker alignment with the satellite galaxy distribution (61% within 30$^\circ$). Robust position angles could be measured using the ICL for 63% of the sample, whereas position angles could be measured for only 30% of the sample using the satellite galaxies. Stacking clusters in redshift bins allows measurements of the ICL surface brightness to $0.6$-$0.8R_{200\mathrm{c}}$ and ellipticity beyond $0.3$-$0.4R_{200\mathrm{c}}$ (300-400 kpc), but we observed a plateau in the ICL ellipticity beyond $0.1R_{200\mathrm{c}}$. These results demonstrate the capability of Euclid to characterise the ICL morphology with high statistical precision, allowing new constraints on cluster halo structure and its evolution with redshift.

astro-ph.GA↗

Euclid Quick Data Release (Q1). A systematic study of the intracluster light fraction at 0.2 < z < 1.5

We present a homogeneous analysis of the intracluster light (ICL) in approximately 300 galaxy clusters spanning $0.2 10^{10}\,M_\odot$). The inferred ICL fraction also depends systematically on wavelength, while remaining largely insensitive to the adopted outer integration radius of 200-600 kpc. These results highlight the importance of homogeneous ICL analyses and constrain the evolution of diffuse stellar components in clusters.

astro-ph.GA↗

Euclid Quick Data Release (Q1). The metallicity of the intracluster light

Colour provides key information to constrain the stellar population of the intracluster light (ICL), the diffuse light within galaxy clusters. We derive radial colour profiles ($Y_\mathrm{E}-H_\mathrm{E}$, $J_\mathrm{E}-H_\mathrm{E}$, $I_\mathrm{E}-H_\mathrm{E}$) of the brightest central galaxy (BCG) and ICL for 168 galaxy clusters from the Dark Energy Survey redMaPPer catalogue within the redshift range $0.1 < z < 0.75$ and halo mass $M_{\rm 200m} > 10^{14.05}M_\odot/h$, within the Euclid Quick Data Release (Q1). By stacking the light profiles measured using elliptical annuli on the BCG and ICL images, we reliably measure the ICL colour out to approximately 300 kpc, over which we find a colour gradient, with the ICL becoming bluer than the BCG out to approximately 150 kpc. Using stellar population synthesis (SPS) models, we find that near-infrared (NIR) colours are sensitive to metallicity, but not age. Thus, we measure a metallicity profile in the BCG and ICL that extends out to 300 kpc for a statistical sample for the first time. While the colours, and the detection of a colour and metallicity gradient, are robust, we note that our metallicity measurement is dependent upon our choice of both SPS model and colour. We find that the metallicity of the BCG is super-solar [$\log_{10} (Z/Z_\odot) > 0.1$], while the ICL is metal-poor [$\log_{10}(Z/Z_\odot)\approx -0.5$], placing the first statistical constraint on the metallicity of the ICL out to large radii. These results support our current understanding of BCG and ICL formation: BCGs form predominantly through mergers with massive galaxies or the cores of satellite galaxies, while the ICL grows via the tidal stripping of lower-metallicity stars from the outskirts of massive satellite galaxies.

astro-ph.GA↗

Euclid Bypass end-to-end simulations for spectroscopic galaxy clustering performance assessment

We present a simulation framework for Euclid galaxy clustering measurements that reproduces the essential behaviour of the spectroscopic reduction chain, bypassing the computation required by full pixel-level simulations. The framework comprises two complementary tools, FastSpec, which simulates 1-dimensional slitless spectra with a simplified instrument and noise model, and Pypelid, which computes detection probabilities on input catalogues, accounting for the survey dithering sequence and spatially varying noise. We develop calibrated prescriptions for the survey selection function, redshift errors, and redshift interloper populations. Applied to the Euclid Wide Survey, the baseline selection yields a redshift purity of 74% and a sample completeness of 45%, which improves with the use of Euclid photometric colours. The redshift error distribution is found to have a Gaussian core of width $σ_z = 9.4 \times 10^{-4}$, with no significant trend over $0.9 < z < 1.8$. Emission lines [OIII]5008 and [SIII]9530 misidentified as H$α$ contribute a few to ten per cent depending on redshift, while catastrophic redshift measurement failures dominate at low signal-to-noise ratio. Simulating the Data Release 1 footprint, we find that complex survey selection effects can be corrected with a forward-modelled random catalogue, recovering the monopole and quadrupole of the galaxy 2-point correlation function. The simplified noise model does not include residual contamination from overlapping spectra, or other artefacts seen in early Euclid data; this will be revisited with DR1 data. The framework provides an efficient route for characterising the Euclid spectroscopic selection function at the precision required for galaxy clustering science, and is the basis for systematic error assessments in Euclid galaxy clustering analyses.

astro-ph.CO↗

Euclid Quick Data Release (Q1). Exploring the complexity of quenching processes across time, environment, and mass through recently quenched galaxies

Recently quenched galaxies (RQGs) provide insights into galaxy quenching. We present a photometric and spectroscopic analysis of RQGs using the first Euclid Quick Data Release (Q1). Using rest-frame UVJ colours, we classify star-forming (SFGs), quiescent (QGs), and recently quenched galaxies at 0.2 0.5, suggesting earlier quenching in dense regions. RQGs show intermediate properties between SFGs and QGs in stellar mass, star-formation rate, specific star-formation rate, Sersic index, and radius. Most RQGs exhibit regular morphologies, excluding merger as a primary mechanism. We find that fRQGs retain disc-like morphologies, whereas sRQGs are more concentrated, suggesting different stages of morphological transformation. Our analysis suggests that multiple mechanisms drive quenching. Stacked spectra of galaxies with spectroscopic redshifts confirm old, passive populations in QGs, while sRQG spectrum shows weak Ha emission, indicating residual star-formation activity or AGN contribution. The recently-quenched nature of RQGs is confirmed by strong Balmer absorption lines in stack DESI spectra. The stacked Euclid QG spectrum agrees with previous templates and stellar population models older than 5Gyr at z<1. These results demonstrate Euclid's potential for studying galaxy quenching, to be further enhanced by future releases.[Abrg.]

astro-ph.GA↗

Euclid: Impact of halo mass-conversion model assumptions on galaxy cluster number-count analyses

The large catalogues of galaxy clusters expected from the Euclid survey will enable cosmological analyses of cluster number counts that require accurate cosmological model predictions. One possibility is to use parametric fits calibrated against $N$-body simulations, that capture the cosmological parameter dependence of the halo mass function. Several studies have shown that this can be obtained through a calibration against haloes with spherical masses defined at the virial overdensity. In contrast, if different mass definitions are used for the HMF and the scaling relation, a mapping between them is required. Here, we investigate the impact of such a mapping on the cosmological parameter constraints inferred from galaxy cluster number counts. Using synthetic data from $N$-body simulations, we show that the standard approach, which relies on assuming a concentration-mass relation, can introduce significant systematic bias. In particular, depending on the mass definition and the relation assumed, this can lead to biased constraints at more than 2$σ$ level. In contrast, we find that in all the cases we have considered, the mass conversion based on the halo sparsity statistics result in a systematic bias smaller than the statistical error.

astro-ph.CO↗

An improved standardization framework for Type II-P supernovae using a hierarchical Bayesian approach

We use Type II-P supernovae (SNe II-P) observed as part of the Nearby Supernova Factory (SNfactory) experiment as standardizable candles to develop an improved standardization framework. The data consist of accurately flux-calibrated, host-subtracted spectrophotometry of low-redshift SNe II-P in the wavelength range $3200 < λ< 10000$ ${\unicode{xC5}}$. We develop an improved method to determine the expansion velocities of SNe II-P based on Gaussian Process regression. We extend the conventional standardized candle method (SCM) by an additional correction term containing the H$_α$ absorption-to-emission ratio and a hierarchical Bayesian framework. We find that the additional correction improves the quality of the standardization, particularly around $30$ to $40$ days after the explosion. We are able to reduce the scatter of the Hubble-flow SNe II-P from $0.28$ mag down to $0.18$ mag compared to previous work. As an example application of this methodology we measure $H_0$ using a pre-existing calibrator sample of SNe~II having Cepheid- or TRGB-based distance moduli. We find a value of $H_0 = 70.6^{+4.5}_{-4.3}$ km s$^{-1}$ Mpc$^{-1}$, including only statistical uncertainty, corresponding to a precision of $6.2$%. We find variations of $1.4$ km s$^{-1}$ Mpc$^{-1}$ between hierarchical model variations --- well within our quoted statistical uncertainty. Without the additional correction term, we obtain $H_0 = 73.0^{+6.9}_{-6.1}$ km s$^{-1}$ Mpc$^{-1}$ ($8.9$% precision) highlighting the improved precision of our new methodology. We identify and discuss inconsistencies between the measured parent populations of the calibrator and Hubble-flow standardization characteristics --- present in this and literature samples --- that are not explained by a simple selection on magnitude and which will need to be improved upon as SN II-P samples grow.

astro-ph.CO↗

Euclid preparation CIX. Baryon acoustic oscillation analysis of photometric galaxy clustering in configuration space

With about 1.5 billion galaxies expected to be observed, the very large number of objects in the Euclid photometric survey will allow for precise studies of galaxy clustering from a single survey, over a large range of redshifts $0.2 < z < 2.5$. In this work, we use photometric redshifts to extract the baryon acoustic oscillation signal (BAO) from the Flagship galaxy mock catalogue with a tomographic approach to constrain the evolution of the Universe and infer its cosmological parameters. We measured the two-point angular correlation function in 13 redshift bins. A template-fitting approach was applied to the measurement to extract the shift of the BAO peak through the transverse Alcock-Paczynski parameter $α$. A joint analysis of all redshift bins was performed to constrain $α$ at the effective redshift $z_\mathrm{eff}=0.77$ with MCMC and profile likelihood techniques. We also extracted one $α_i$ parameter per redshift bin to quantify its evolution as a function of time. From these 13 $α_i$, which are directly proportional to the ratio $D_\mathrm{A}/r_\mathrm{d}$, we constrain the product $h\,r_\mathrm{d}$ and $Ω_\mathrm{m}$. From the joint analysis, we constrain $D_\mathrm{A}/r_\mathrm{d}=10.764^{+0.0839}_{-0.0849}$, a three-fold improvement over current constraints from the Dark Energy Survey. As expected, the constraining power in the analysis of each redshift bin is lower, with an uncertainty ranging from $\pm\,1.23$ to $\pm\,0.289$. From these results, we constrain $Ω_\mathrm{m}=0.296^{+0.074}_{-0.059}$ and $h\,r_\mathrm{d}=99.35^{+4.29}_{-4.55}\,\mathrm{Mpc}$. We quantify the influence of analysis choices such as the template, scale cuts, redshift bins, and systematic effects such as redshift-space distortions, over our constraints, both at the level of the extracted $α_i$ parameters and at the level of cosmological inference.

astro-ph.CO↗

Euclid preparation. Testing analytic models of galaxy intrinsic alignments in the Euclid Flagship simulation

We model intrinsic alignments (IA) in Euclid's Flagship simulation to investigate its impact on Euclid's weak lensing signal. Our IA implementation in the Flagship simulation takes into account photometric properties of galaxies as well as their dark matter host halos. We compare simulations against theory predictions, determining the parameters of two of the most widely used IA models: the Non Linear Alignment (NLA) and the Tidal Alignment and Tidal Torquing (TATT) models. We measure the amplitude of the simulated IA signal as a function of galaxy magnitude and colour in the redshift range $0.1<z<2.1$. We find that both NLA and TATT can accurately describe the IA signal in the simulation down to scales of $6$-$7 \,h^{-1}\,$Mpc. We measure alignment amplitudes for red galaxies comparable to those of the observations, with samples not used in the calibration procedure. For blue galaxies, our constraints are consistent with zero alignments in our first redshift bin $0.1 < z < 0.3$, but we detect a non-negligible signal at higher redshift, which is, however, consistent with the upper limits set by observational constraints. Additionally, several hydrodynamical simulations predict alignment for spiral galaxies, in agreement with our findings. Finally, the evolution of alignment with redshift is realistic and comparable to that determined in the observations. However, we find that the commonly adopted redshift power-law for IA fails to reproduce the simulation alignments above $z=1.1$. A significantly better agreement is obtained when a luminosity dependence is included, capturing the intrinsic luminosity evolution with redshift in magnitude-limited surveys. We conclude that the Flagship IA simulation is a useful tool for translating current IA constraints into predictions for IA contamination of Euclid-like samples.

astro-ph.CO↗

Euclid Quick Data Release (Q1). The first Euclid view of Planck galaxy protocluster candidates at cosmic noon

[ABRIGED ABSTRACT] A large catalogue of candidate galaxy protoclusters with high star-formation rates was produced by the Planck collaboration. We search, in the first data release (Q1) of the Euclid survey, for the visible and infrared counterparts of the Planck galaxy protocluster candidates expected to be above $z > 1.5$. Eight of them are in Euclid Q1. Our goal is to investigate the optical nature of these overdensities previously detected in the submillimetre wavelength range. We search for overdensities using the DETECTIFz algorithm, an overdensity finder based on Delaunay tessellation that uses photometric redshift probability distributions through Monte Carlo simulations. Focusing our search on the eight high-star forming Planck protocluster candidates, we find that two of them have one Euclid counterpart, and six have between two and four Euclid counterparts, which amounts to a total of 20 Euclid counterparts. These Euclid counterparts lie at photometric redshifts $1.4<z_{\rm ph} < 2.7$ and 12 of them also have partial Herschel coverage. All detections have also been confirmed by at least one other independent protocluster detection algorithm. We study the colours, derived stellar masses and star-formation rates (SFRs) of the detected member galaxies of those protocluster candidate counterparts. We also estimate the total stellar masses, SFRs, and the halo mass lower limits for all Euclid protocluster candidates. We find that in the dark matter halo mass ($M_{\rm h}$) / redshift plane, these Planck and Euclid overdense regions lie in the region $12.6 <\log_{10} (M_{\rm h}/M_\odot)< 13.4$, $1.4<z< 2.7$. This means that the halos of our objects are expected to have experienced a transition between cold flows in hot media to accretion of hot material.

astro-ph.CO↗

Euclid: Disky titans - surprisingly high star formation activity and gas content in two brightest group galaxies at z~0.75

We present the discovery of two disky titans in the first data release of the Euclid satellite. These sources are massive (M>10^11 Msun) star-forming (SFR~20 Msun/yr) discs located in strong over-densities at intermediate redshift (z~0.75). They represent an small fraction of the massive galaxies in over-dense regions (just four candidates in more than 20 deg2 analysed in this study), and their existence is puzzling considering the abundance of passive and bulge-dominated sources commonly found at the centre of groups and clusters at low redshift. Firstly, our analysis shows that these objects are located in massive groups (Mh~10^13.8 Msun), where rapid accretion of cold gas should be prevented from the formation of a static hot halo. Despite this, a millimetre follow-up with NOEMA shows significant cold gas reservoirs (M_h2~10^10.3 Msun) within these sources. Secondly, our morphological analysis shows the presence of a massive and passive bulge in these galaxies, which is expected to stabilise the disc against fragmentation thereby suppressing further star formation. However, these sources lie on the Schmidt-Kennicutt relation or even slightly above. Building on these observations, we propose a scenario where these disky titans are the product of a merger-induced rejuvenation episode, in which the most massive galaxy of a group accretes cold gas from another member and briefly restarts star-formation. Such scenario is supported by a comparison with the TNG300 simulation and easily explains the surviving of star-formation activity in massive galaxies in over-dense environments as temporary stages in a more complex evolution. More in general, our study showcases the ability of Euclid to find rare objects thanks to the unprecedented statistics offered by its surveys and the scientific potential residing in the synergy between Euclid and other facilities observing at longer wavelengths.

astro-ph.GA↗

Euclid preparation. XCV. Cosmology Likelihood for Observables in Euclid (CLOE). 2. Code implementation

We provide a description of the code implementation and structure of Cosmology Likelihood for Observables in Euclid (CLOE), developed by members of the Euclid Consortium. CLOE is a modular Python code for computing the theoretical predictions of cosmological observables and evaluating them against state-of-the-art data from galaxy surveys such as Euclid in a unified likelihood. This primarily includes the core observables of weak gravitational lensing, photometric galaxy clustering, galaxy-galaxy lensing, and spectroscopic galaxy clustering, but also extended probes such as the clusters of galaxies and cross-correlations of galaxy positions and shapes with the cosmic microwave background. While CLOE has been developed to serve as the unified framework for the parameter inferences in Euclid, it has general capabilities that can serve the broader cosmological community. It is different from other comparable cosmological tools in that it is written entirely in Python, performs the full likelihood calculation, and includes both photometric and spectroscopic observables. We focus on the primary probes of Euclid and describe the overall code structure, rigorous code development practices, extensive documentation, unique features, speed optimization, and future development plans. CLOE is publicly available at https://github.com/cloe-org/cloe.

astro-ph.CO↗

Euclid preparation XCVII. Cosmology Likelihood for Observables in Euclid (CLOE). 4: Validation and performance

The Euclid satellite will provide data on the clustering of galaxies and on the distortion of their measured shapes, which can be used to constrain and test the cosmological model. However, the increase in precision places strong requirements on the accuracy of the theoretical modelling for the observables and of the full analysis pipeline. In this paper, we investigate the accuracy of the calculations performed by the Cosmology Likelihood for Observables in Euclid (CLOE), a software able to handle both the modelling of observables and their fit against observational data for both the photometric and spectroscopic surveys of Euclid, by comparing the output of CLOE with external codes used as benchmark. We perform such a comparison on the quantities entering the calculations of the observables, as well as on the final outputs of these calculations. Our results highlight the high accuracy of CLOE when comparing its calculation against external codes for Euclid observables on an extended range of operative cases. In particular, all the summary statistics of interest always differ less than $0.1\,σ$ from the chosen benchmark, and CLOE predictions are statistically compatible with simulated data obtained from benchmark codes. The same holds for the comparison of correlation function in configuration space for spectroscopic and photometric observables.

astro-ph.CO↗

Euclid Quick Data Release (Q1): Disc breaks highlight the structural evolution of galaxies through time

Changes in the slope of the radial surface brightness profiles of disc galaxies, or disc breaks, encode valuable information about the processes driving disc formation and growth. Until now, due to the resolution and depth required, statistical studies of break types have been limited mostly to the local Universe. We aim to study the structural properties and redshift evolution of disc breaks in a large and statistically representative sample of galaxies out to redshift z=1 using the superb depth and resolution of Euclid. We develop an automatic pipeline to extract and analyse surface brightness profiles of 8748 disc galaxies selected from the Euclid Q1 dataset. The pipeline includes advanced masking, surface brightness profile extraction, integrated photometry and structural parameter measurements, and piecewise modelling to classify galaxies into Types I (pure exponential), Type II (down-bending), Type III (up-bending), and composite break (e.g., Type~II+III, Type~II+II, etc) profiles. We quantify structural parameters such as scale lengths, break radii, and surface brightness levels, and analyse their distributions and redshift dependence. Our automatic method produces reliable masks and deep surface brightness profiles, and classifies galaxy profiles with an estimated accuracy of 70%. Using a subsample of 4385 galaxies with reliable classifications, we find that the most common profiles are Types II, II+III, I, and III. We find substantial evolution in the fraction of disc breaks with time. Type II profiles dominate at low redshift (50%), while Types III and II+III profiles increase in frequency with lookback time, reaching 30% each at z~1. Our study provides the first statistically robust measurement of the evolution of disc break types over 5 Gyr. The observed trends support a scenario in which secular processes replace environmental influences as galaxies mature.

astro-ph.GA↗

Euclid: Quick Data Release (Q1) -- Optical hotspots in powerful radio galaxies

The hotspots of powerful radio galaxies are the sites of high-energy particle acceleration, but radio observations give us limited information on the electron energy distributions that they generate, which affects our overall understanding of their physics and energetics. Optical synchrotron counterparts to radio galaxy hotspots, which probe high electron energies, have been known for many years, but have only been studied in a small number of objects selected as being very bright in the radio. By combining Low-Frequency Array (LOFAR) observations with the Euclid Q1 data release in the Euclid Deep Field North, we identify 77 powerful radio galaxies with hotspots and show that a small but significant fraction of them, 7--15\%, may have detected infrared and optical counterparts to their hotspots. The hotspot spectral energy distributions in our clearest cases are consistent with particle acceleration up to (but not beyond) 1\,TeV in energy on the assumption of field strengths close to equipartition, whereas non-detected hotspots either do not reach such high electron energies or would have to have very different electron energy spectra or significantly sub-equipartition magnetic field strengths. Two new candidate optical hotspots are clearly detected matching high-resolution LOFAR data; one is remarkable as both the highest-redshift optical hotspot known to date ($z \approx 1.6$) and also the first optical detection of the hotspot of the inner lobe of a restarting source. We discuss approaches to performing a large-scale study of hotspots with the full wide-area Euclid surveys, particularly when combined with the international baselines of LOFAR, enabling for the first time a statistical analysis of high-energy particle acceleration in hotspots.

astro-ph.HE↗