arXiv subjects

Y. D. Shikhmurzaev

Publications and source records attributed to Y. D. Shikhmurzaev.

7 recordsLinked to original sources

arXiv2012

Dynamic contact angle of a liquid spreading on an unsaturated wettable porous substrate

The spreading of an incompressible viscous liquid over an isotropic homogeneous unsaturated porous substrate is considered. It is shown that, unlike the dynamic wetting of an impermeable solid substrate, where the dynamic contact angle has to be specified as a boundary condition in terms of the wetting velocity and other flow characteristics, the `effective' dynamic contact angle on an unsaturated porous substrate is completely determined by the requirement of existence of a solution, i.e. the absence of a nonintegrable singularity in the spreading fluid's pressure at the `effective' contact line. The obtained velocity dependence of the `effective' contact angle determines the critical point at which a transition to a different flow regime takes place, where the fluid above the substrate stops spreading whereas the wetting front inside it continues to propagate.

physics.flu-dyn↗

arXiv2012

Wetting Front Dynamics in Isotropic Porous Media

A new approach to the modelling of wetting fronts in porous media on the Darcy scale is developed, based on considering the types (modes) of motion the menisci go through on the pore scale. This approach is illustrated using a simple model case of imbibition of a viscous incompressible liquid into an isotropic porous matrix with two modes of motion for the menisci, the wetting mode and the threshold mode. The latter makes it necessary to introduce an essentially new technique of conjugate problems that allows one to link threshold phenomena on the pore scale with the motion on the Darcy scale. The developed approach (a) makes room for incorporating the actual physics of wetting on the pore scale, (b) brings in the physics associated with pore-scale thresholds, which determine when sections of the wetting front will be brought to a halt (pinned), and, importantly, (c) provides a regular framework for constructing models of increasing complexity.

physics.flu-dyn↗

arXiv2012

The Dynamics of Liquid Drops and their Interaction with Solids of Varying Wettabilites

Microdrop impact and spreading phenomena are explored as an interface formation process using a recently developed computational framework. The accuracy of the results obtained from this framework for the simulation of high deformation free-surface flows is confirmed by a comparison with previous numerical studies for the large amplitude oscillations of free liquid drops. Our code's ability to produce high resolution benchmark calculations for dynamic wetting flows is then demonstrated by simulating microdrop impact and spreading on surfaces of greatly differing wettability. The simulations allow one to see features of the process which go beyond the resolution available to experimental analysis. Strong interfacial effects which are observed at the microfluidic scale are then harnessed by designing surfaces of varying wettability that allow new methods of flow control to be developed.

physics.flu-dyn↗

arXiv2009

Viscous flows in corner regions: Singularities and hidden eigensolutions

Numerical issues arising in computations of viscous flows in corners formed by a liquid-fluid free surface and a solid boundary are considered. It is shown that on the solid a Dirichlet boundary condition, which removes multivaluedness of velocity in the `moving contact-line problem' and gives rise to a logarithmic singularity of pressure, requires a certain modification of the standard finite-element method. This modification appears to be insufficient above a certain critical value of the corner angle where the numerical solution becomes mesh-dependent. As shown, this is due to an eigensolution, which exists for all angles and becomes dominant for the supercritical ones. A method of incorporating the eigensolution into the numerical method is described that makes numerical results mesh-independent again. Some implications of the unavoidable finiteness of the mesh size in practical applications of the finite element method in the context of the present problem are discussed.

physics.flu-dyn↗

arXiv2009

A continuum model for the flow of thin liquid films over intermittently chemically patterned surfaces

It is known from both experiments and molecular dynamics simulations that chemically patterning a solid surface has an effect on the flow of an adjacent liquid. This fact is in stark contrast with predictions of classical fluid mechanics where the no-slip boundary condition is insensitive to the chemistry of the solid substrate. It has been shown that the influence on the flow caused by a steep change in the wettability of the solid substrate can be described in the framework of continuum mechanics using the interface formation theory. The present work extends this study to the case of intermittent patterning. Results show that variations in wettability of the substrate can significantly affect the flow, especially of thin films, which may have applications to the design of microfluidic devices.

physics.flu-dyn↗

arXiv2009

Viscous Flow Over a Chemically Patterned Surface

The classical fluid dynamics boundary condition of no-slip suggests that variation in the wettability of a solid should not affect the flow of an adjacent liquid. However experiments and molecular dynamics simulations indicate that this is not the case. In this paper we show how flow over a solid substrate with variations of wettability can be described in a continuum framework using the interface formation theory developed earlier. Results demonstrate that a shear flow over a perfectly flat solid surface is disturbed by a change in its wettability, i.e. by a change in the chemistry of the solid substrate. The magnitude of the effect is shown to be proportional to cos(t1)-cos(t2) where t1 and t2 are the equilibrium contact angles that a liquid-gas free surface would form with the two chemically different parts of the solid surface.

physics.flu-dyn↗

arXiv2009

Viscous Flow in Domains with Corners: Numerical Artifacts, their Origin and Removal

We show that an attempt to compute numerically a viscous flow in a domain with a piece-wise smooth boundary by straightforwardly applying well-tested numerical algorithms (and numerical codes based on their use, such as COMSOL Multiphysics) can lead to spurious multivaluedness and nonintegrable singularities in the distribution of the fluid's pressure. The origin of this difficulty is that, near a corner formed by smooth parts of the piece-wise smooth boundary, in addition to the solution of the inhomogeneous problem, there is also an eigensolution. For obtuse corner angles this eigensolution (a) becomes dominant and (b) has a singular radial derivative of velocity at the corner. A method is developed that uses the knowledge about the eigensolution to remove multivaluedness and nonintegrability of the pressure. The method is first explained in the simple case of a Stokes flow in a corner region and then generalised for the full-scale unsteady Navier-Stokes flow in a domain with a free surface.

physics.flu-dyn↗