SearcharxivSearch

arXiv subjects

Y. Hao

Publications and source records attributed to Y. Hao.

At least 19 recordsLinked to original sources

Backward Arcs in Hamilton Oriented Cycles and Paths in Directed Graphs with Independence Number Two

In a digraph $D=(V,A)$, an oriented path is a sequence $P=x_1x_2\dots x_p$ of distinct vertices such that either $x_ix_{i+1}\in A$ or $x_{i+1}x_{i}\in A$ or both for every $i\in [p-1]$. If $x_ix_{i+1}\in A$ in $P$, then $x_ix_{i+1}$ is a forward arc of $P$; otherwise, $x_{i+1}x_{i}$ is a backward arc. The independence number $\alpha(D)$ is the maximum integer $p$ such that $D$ has a set of $p$ vertices where there is no arc between any pair of vertices. A digraph is $k$-connected if its underlying undirected graph is $k$-connected. Freschi and Lo (JCT-B 2024) proved that every $n$-vertex oriented graph with minimum degree $\delta\ge n/2$ has a Hamilton oriented cycle with at most $n-\delta$ backward arcs. We prove that every 2-connected digraph $D$ with $\alpha(D)\le 2$ has a Hamilton oriented cycle with at most five backward arcs, and every 1-connected digraph $D$ with $\alpha(D)\le 2$ has a Hamilton oriented path with at most two backward arcs.

math.CO

Polarization-Multiplexed Chaotic LiDAR Based on a VCSEL with Delayed Orthogonal Feedback

Light detection and ranging (LiDAR) systems are pivotal for precise distance and velocity measurement, yet widespread deployment requires solutions that balance their performance, robustness, and simplicity. Here, we propose a novel chaotic LiDAR system based on a semiconductor vertical-cavity surface-emitting laser (VCSEL) with delayed orthogonal polarization feedback. By exploiting the intrinsic competition between the transverse electric (TE) and transverse magnetic (TM) modes, the system generates a polarization-multiplexed dynamics: a chaotic TM mode serves as the reference, while a feedback-modulated TE mode probes the target. This all-in-one source eliminates the need for external optical modulators or complex coherent detection. The system's dynamics is finely tunable via a half-wave ($\lambda$/2) plate in the feedback loop and the laser injection current, enabling real-time optimization of the cross-correlation signal-to-noise ratio. Experimental results demonstrate precise linear ranging with a resolution of approximately 1.2 cm. Furthermore, the system exhibits strong inherent resistance to external optical interference, maintaining accurate ranging even in the presence of a secondary laser source. This compact, tunable, and interference-resilient platform offers a promising pathway toward low-cost, high-performance LiDAR for applications in autonomous navigation, robotics, and industrial metrology.

physics.optics

Deterministic Control of Extreme Events in a semiconductor VCSEL via Polarization-Engineered Optical Feedback

Extreme events, or rogue waves, are high-amplitude, rare occurrences that emerge across diverse physical systems and often defy conventional statistical predictions. While optical systems provide a controlled setting for studying these phenomena, achieving deterministic control over their generation remains challenging. Here, we demonstrate a novel approach to induce and precisely modulate extreme events in a semiconductor VCSEL using polarization-controlled optical feedback. By integrating a $\lambda$/2-waveplate into a polarization-selective external cavity, we regulate the nonlinear interaction between TE and TM modes. This setup triggers high-intensity, heavy-tailed fluctuations in the TM mode, exhibiting clear signatures of extreme events. We show that these events arise from deterministic energy exchange between modes, as evidenced by strong bipolar correlations and long-range temporal memory. The waveplate angle serves as an effective external parameter, enabling non-monotonic tuning of the event rate, intensity, and temporal clustering. Our study establish a platform for exploring extreme events in dissipative systems, with implications for nonlinear photonics and optical technologies.

physics.optics

Statistics and systematics of electron EDM searches with BaF

The NL-$e$EDM experiment searches for a non-zero electric dipole moment of the electron $d_e$ ($e$EDM) in the ground state of barium monofluoride (BaF). A beam of BaF from a supersonic expansion source is probed with the spin precession method presented in \cite{Boeschoten2024}. This method permits the extraction of an $e$EDM value as well as values for parameters causing a possible systematic bias leading to a false $e$EDM. The currently achievable sensitivity is limited by statistics collected in a period of 34 hours and yields an $d_e$ of $2(3) \times 10^{-25}$ $e\,$cm. Furthermore, from the same dataset sufficiently strong limits on parameters which can induce a false $e$EDM are extracted. These are mainly the electric field \textbf{E} and the intensity of the lasers fields in the fiducial volume of the experiment. We summarize the steps required to upgrade of the experiment to reach a competitive level on $d_e$, e.g. an intense laser-cooled beam from a cryogenic buffer gas source and the light collection efficiency of fluorescence.

physics.atom-ph

Mode locking via delayed orthogonal-polarization reinjection in semiconductor VCSELs

We demonstrate harmonic mode-locking in a semiconductor VCSEL using polarization-controlled delayed feedback. By integrating a rotatable $\lambda$/2-plate within an external cavity, we achieve precise control over pulse multiplicity and repetition rates in TE and TM modes. For the TE mode, increasing the $\lambda$/2-plate angle ($\theta$) transitions the system from disordered quasi-periodic states to stable fundamental (single-pulse) and harmonic dual-pulse mode-locking. Polarization-resolved measurements and cross-correlation analyses reveal coherent pulse alignment at half the cavity roundtrip time, enabled by polarization-mediated nonlinear dynamics. This work establishes cross-polarization feedback as a fundamental mechanism for ultrafast pulse engineering, advancing the understanding of polarization-mediated nonlinear dynamics in laser physics.

physics.optics

Analysis of inertial-range intermittency in forward and inverse cascade regions in isotropic turbulence

In order to test the hypothesis that inverse cascade regions in turbulent flows might exhibit more Gaussian noise-like and less intermittent small-scale statistics compared to the overall statistics, in this work we measure degrees of small-scale intermittency separately in regions of forward and inverse cascade. The local energy cascade rate $(\Phi_\ell)$ at length scale $(\ell)$ is defined using the scale-integrated Kolmogorov-Hill (KH) equation. To characterize intermittency, we analyze the probability density functions (PDFs) of longitudinal and transverse velocity increments at scale $\ell$, conditioned on positive and negative $\Phi_\ell$ (local forward and inverse cascades). Our findings reveal that transverse velocity increments display approximately the same degree of non-Gaussianity and intermittency, in both forward or inverse cascade regions. The only noticeable difference is observed for longitudinal velocity increments that display strong negative skewness in regions of forward cascade compared to small positive skewness in regions of inverse cascade. We repeat the analysis for filtered velocity gradient tensor elements at scale $\ell$ and obtain similar results, except that the skewness of its longitudinal elements is slightly negative even in regions of inverse cascade. The analysis is based on isotropic turbulence data ($Re_\lambda \sim 1{,}250$) available from the public Johns Hopkins Turbulence Databases, JHTDB v2.0. This refactored system is based on the Zarr storage format, while data access is based on the ``virtual sensor'' approach, enabled by a Python backend package (Giverny) that replaces the legacy SQL storage and SOAP Web Services-based approaches. Information about the new system as well as sample Python notebooks are described and illustrated. (Matlab, C, and Fortran access methods are also provided).

physics.flu-dyn

Improving Optics Control and Measurement at RHIC

Maximizing luminosity requires precise control of the optics function at the interaction point (IP), implying that the location ($s^*$) of the beta function's minimum value ($\beta^*$) must be moved to the collision location ($s_{IP}$) as much as possible. Accurate optics measurements and reliable control of $s^*$ in both planes are therefore essential for optimal collider performance. During Relativistic Heavy Ion Collider (RHIC) operations in 2024, measurements indicate an average horizontal beta beat of approximately $20\%$ at IP8, accompanied by measurement variation in measured $s^*$ in both planes. In this paper, a sensitivity-matrix-based optics correction scheme is demonstrated to effectively steer the optics toward desired targets using power supply currents of IR quadrupoles in the 8 o'clock interaction region (IR8). In addition, a method for measuring linear optics based on the one-turn map within the interaction regions is developed and systematically compared with established optics measurement methods used in RHIC operations. A comprehensive error analysis is performed for all measurement methods considered. Through these methods, a consistent reduction of $10\%$ beta beat is achieved by moving $s^*_x$ as well as a significant improvement in the reproducibility of $s^*$ measurements in both planes. The techniques demonstrated here will be further developed to support linear optics analysis and control of the future Electron-Ion Collider project.

physics.acc-ph

Efficient Second Harmonic Generation from Silicon Slotted Nanocubes with Bound States in the Continuum

Optical materials with centrosymmetry, such as silicon and germanium, are unfortunately absent of second-order nonlinear optical responses, hindering their developments in efficient nonlinear optical devices. Here, a design with an array of slotted nanocubes is proposed to realize remarkable second harmonic generation (SHG) from the centrosymmetric silicon, which takes advantage of enlarged surface second-order nonlinearity, strengthened electric field over the surface of the air-slot, as well as the resonance enhancement by the bound states in the continuum. Compared with that from the array of silicon nanocubes without air-slots, SHG from the slotted nanocube array is improved by more than two orders of magnitude. The experimentally measured SHG efficiency of the silicon slotted nanocube array is high as 1.8*10^-4 W^-1, which is expected to be further engineered by modifying the air-slot geometries. Our result could provide a new strategy to expand nonlinear optical effects and devices of centrosymmetric materials.

physics.optics

High-Q Resonances Governed by the Quasi-Bound States in the Continuum in All-Dielectric Metasurfaces

The realization of high-Q resonances in a silicon metasurface with various broken-symmetry blocks is reported. Theoretical analysis reveals that the sharp resonances in the metasurfaces originate from symmetry-protected bound states in the continuum (BIC) and the magnetic dipole dominates these peculiar states. A smaller size of the defect in the broken-symmetry block gives rise to the resonance with a larger Q factor. Importantly, this relationship can be tuned by changing the structural parameter, resulting from the modulation of the topological configuration of BICs. Consequently, a Q factor of more than 3,000 can be easily achieved by optimizing dimensions of the nanostructure. At this sharp resonance, the intensity of the third harmonic generation signal in the patterned structure can be 368 times larger than that of the flat silicon film. The proposed strategy and underlying theory can open up new avenues to realize ultrasharp resonances, which may promote the development of the potential meta-devices for nonlinearity, lasing action, and sensing.

physics.optics

Strategies in Education, Outreach, and Inclusion to Enhance the US Workforce in Accelerator Science and Engineering

We summarize the community-based consensus for improvements concerning education, public outreach, and inclusion in Accelerator Science and Engineering that will enhance the workforce in the USA. The improvements identified reflect the product of discussions held within the 2021-2022 Snowmass community planning process by topical group AF1: Beam Physics and Accelerator Education within the Accelerator Frontier. Although the Snowmass process centers on high-energy physics, this document outlines required improvements for the entire U.S. accelerator science and engineering enterprise because education of those entering and in the field, outreach to the public, and inclusion are inextricably linked.

physics.acc-ph

Simulations of Future Particle Accelerators: Issues and Mitigations

The ever increasing demands placed upon machine performance have resulted in the need for more comprehensive particle accelerator modeling. Computer simulations are key to the success of particle accelerators. Many aspects of particle accelerators rely on computer modeling at some point, sometimes requiring complex simulation tools and massively parallel supercomputing. Examples include the modeling of beams at extreme intensities and densities (toward the quantum degeneracy limit), and with ultra-fine control (down to the level of individual particles). In the future, adaptively tuned models might also be relied upon to provide beam measurements beyond the resolution of existing diagnostics. Much time and effort has been put into creating accelerator software tools, some of which are highly successful. However, there are also shortcomings such as the general inability of existing software to be easily modified to meet changing simulation needs. In this paper possible mitigating strategies are discussed for issues faced by the accelerator community as it endeavors to produce better and more comprehensive modeling tools. This includes lack of coordination between code developers, lack of standards to make codes portable and/or reusable, lack of documentation, among others.

physics.acc-ph

Accelerator and Beam Physics Research Goals and Opportunities

This report is a summary of two preparatory workshops, documenting the community vision for the national accelerator and beam physics research program. It identifies the Grand Challenges of accelerator and beam physics (ABP) field and documents research opportunities to address these Grand Challenges. This report will be used to develop a strategic research roadmap for the field of accelerator science.

physics.acc-ph

6G Wireless Channel Measurements and Models: Trends and Challenges

In this article, we first present our vision on the application scenarios, performance metrics, and potential key technologies of the sixth generation (6G) wireless communication networks. Then, 6G wireless channel measurements, characteristics, and models are comprehensively surveyed for all frequency bands and all scenarios, focusing on millimeter wave (mmWave), terahertz (THz), and optical wireless communication channels under all spectrums, satellite, unmanned aerial vehicle (UAV), maritime, and underwater acoustic communication channels under global coverage scenarios, and high-speed train (HST), vehicle-to-vehicle (V2V), ultra-massive multiple-input multiple-output (MIMO), orbital angular momentum (OAM), and industry Internet of things (IoT) communication channels under full application scenarios. Future research challenges on 6G channel measurements, a general standard 6G channel model framework, channel measurements and models for intelligent reflection surface (IRS) based 6G technologies, and artificial intelligence (AI) enabled channel measurements and models are also given.

eess.SP

Lifetime Measurements of the $A^2Π_{1/2}$ and $A^2Π_{3/2}$ States in BaF

Time resolved detection of laser induced fluorescence from pulsed excitation of electronic states in barium monofluoride (BaF) molecules has been performed in order to determine the lifetimes of the $A^2Π_{1/2}$ and $A^2Π_{3/2}$ states. The method permits control over experimental parameters such that systematic biases in the interpretation of the data can be controlled to below $10^{-3}$ relative accuracy. The statistically limited values for the lifetimes of the $A^2Π_{1/2}(ν=0)$ and $A^2Π_{3/2}(ν=0)$ states are 57.1(3) ns and 47.9(7)~ns, respectively. The ratio of these values is in good agreement with scaling for the different excitation energies. The investigated molecular states are of relevance for an experimental search for a permanent electric dipole moment (EDM) of the electron in BaF.

physics.atom-ph

Mode Structure in Superconducting Metamaterial Transmission Line Resonators

Superconducting metamaterials are a promising resource for quantum information science. In the context of circuit QED, they provide a means to engineer on-chip, novel dispersion relations and a band structure that could ultimately be utilized for generating complex entangled states of quantum circuitry, for quantum reservoir engineering, and as an element for quantum simulation architectures. Here we report on the development and measurement at millikelvin temperatures of a particular type of circuit metamaterial resonator composed of planar superconducting lumped-element reactances in the form of a discrete left-handed transmission line (LHTL). We discuss the details of the design, fabrication, and circuit properties of this system. As well, we provide an extensive characterization of the dense mode spectrum in these metamaterial resonators, which we conducted using both microwave transmission measurements and laser scanning microscopy (LSM). Results are observed to be in good quantitative agreement with numerical simulations and also an analytical model based upon current-voltage relationships for a discrete transmission line. In particular, we demonstrate that the metamaterial mode frequencies, spatial profiles of current and charge densities, and damping due to external loading can be readily modeled and understood, making this system a promising tool for future use in quantum circuit applications and for studies of complex quantum systems.

physics.app-ph

Origin of the Extremely Large Magnetoresistance in the Semimetal YSb

Electron-hole (e-h) compensation is a hallmark of multi-band semimetals with extremely large magnetoresistance (XMR) and has been considered to be the basis for XMR. Recent spectroscopic experiments, however, reveal that YSb with non-saturating magnetoresistance is uncompensated, questioning the e-h compensation scenario for XMR. Here we demonstrate with magnetoresistivity and angle dependent Shubnikov - de Haas (SdH) quantum oscillation measurements that YSb does have nearly perfect e-h compensation, with a density ratio of $0.95$ for electrons and holes. The density and mobility anisotropy of the charge carriers revealed in the SdH experiments allow us to quantitatively describe the magnetoresistance with an anisotropic multi-band model that includes contributions from all Fermi pockets. We elucidate the role of compensated multi-bands in the occurrence of XMR by demonstrating the evolution of calculated magnetoresistances for a single band and for various combinations of electron and hole Fermi pockets.

cond-mat.mtrl-sci

Direct manipulation of wave amplitude and phase through inverse design of isotropic media

In this article we propose a new design methodology allowing us to control both ampli- tude and phase of electromagnetic waves from a cylindrical incident wave. This results in isotropic materials and does not resort to transformation optics or its quasi-conformal approximations. Our method leads to two-dimensional isotropic, inhomogeneous material profiles of permittivity and permeability, to which a general class of scattering-free wave solutions arise. Our design is based on the separation of the complex wave solution into amplitude and phase. We give two types of examples to validate our methodology.

physics.class-ph

Measurements of nanoresonator-qubit interactions in a hybrid quantum electromechanical system

Experiments to probe the basic quantum properties of motional degrees of freedom of mechanical systems have developed rapidly over the last decade. One promising approach is to use hybrid electromechanical systems incorporating superconducting qubits and microwave circuitry. However, a critical challenge facing the development of these systems is to achieve strong coupling between mechanics and qubits while simultaneously reducing coupling of both the qubit and mechanical mode to the environment. Here we report measurements of a qubit-coupled mechanical resonator system consisting of an ultra-high-frequency nanoresonator and a long coherence-time superconducting transmon qubit, embedded in superconducting coplanar waveguide cavity. It is demonstrated that the nanoresonator and transmon have commensurate energies and transmon coherence times are one order of magnitude larger than for all previously reported qubit-coupled nanoresonators. Moreover, we show that numerical simulations of this new hybrid quantum system are in good agreement with spectroscopic measurements and suggest that the nanoresonator in our device resides at low thermal occupation number, near its ground state, acting as a dissipative bath seen by the qubit. We also outline how this system could soon be developed as a platform for implementing more advanced experiments with direct relevance to quantum information processing and quantum thermodynamics, including the study of nanoresonator quantum noise properties, reservoir engineering, and nanomechanical quantum state generation and detection.

quant-ph